Yoshihiro Kobayashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yoshihiro Kobayashi has a total of 257 co-authors. Here are the top co-authors by number of shared publications:
- Satoru Suzuki
Laboratory of Advanced Science and Technology for Industry, University of Hyogo 1 , Kamigori, Ako, Hyogo 678-1205
30 shared publications - Toshio Ogino
Yokohama National University
26 shared publications Yoshikazu Homma
25 shared publications- Taiki Inoue
Department of Applied Physics, The University of Osaka , Suita, Osaka 565-0871
17 shared publications Daisuke Takagi
NTT Basic Research Laboratories, Nippon Telegraph and Telephone Corporation, Atsugi, Kanagawa, Japan
16 shared publications- Ryota Negishi
Osaka University
16 shared publications
Latest Publications
- 29 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (26)
Substrate-dependent electrical transport in individual single-walled carbon nanotubes grown across SiO2 and hexagonal boron nitride
The electronic transport properties of carbon nanotubes (CNTs) are strongly affected by their surrounding environment, making the underlying substrate a critical factor for device performance. Here, we demonstrate enhanced carrier transport of individual single-walled CNTs on hexagonal boron nitride (hBN) by directly comparing CNT channels on SiO2 and hBN within the same nanotube. This within-tube comparison removes tube-to-tube variability in chirality, diameter, and defect density, allowing the intrinsic substrate effect to be evaluated more reliably. The CNTs were synthesized using gas flow-directed growth, which yields long, well-aligned CNTs without transfer processes, allowing a single nanotube to extend across different substrate regions. Multichannel field-effect transistors fabricated along an individual CNT exhibit clear ambipolar characteristics. CNT channels on hBN consistently exhibit higher field-effect mobility than those on SiO2. In contrast, temperature-dependent transport near the charge neutrality point exhibits thermally activated behavior with similar activation energies (15–20 meV) on both substrates, indicating that the intrinsic small bandgap of CNTs is largely unaffected by the substrate. These results provide direct evidence that hBN enhances low-field carrier transport in CNTs and establish a foundation for the fabrication of high-performance electronics based on hBN-supported CNTs.
- 29 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (26)
Substrate-dependent electrical transport in individual single-walled carbon nanotubes grown across SiO2 and hexagonal boron nitride
The electronic transport properties of carbon nanotubes (CNTs) are strongly affected by their surrounding environment, making the underlying substrate a critical factor for device performance. Here, we demonstrate enhanced carrier transport of individual single-walled CNTs on hexagonal boron nitride (hBN) by directly comparing CNT channels on SiO2 and hBN within the same nanotube. This within-tube comparison removes tube-to-tube variability in chirality, diameter, and defect density, allowing the intrinsic substrate effect to be evaluated more reliably. The CNTs were synthesized using gas flow-directed growth, which yields long, well-aligned CNTs without transfer processes, allowing a single nanotube to extend across different substrate regions. Multichannel field-effect transistors fabricated along an individual CNT exhibit clear ambipolar characteristics. CNT channels on hBN consistently exhibit higher field-effect mobility than those on SiO2. In contrast, temperature-dependent transport near the charge neutrality point exhibits thermally activated behavior with similar activation energies (15–20 meV) on both substrates, indicating that the intrinsic small bandgap of CNTs is largely unaffected by the substrate. These results provide direct evidence that hBN enhances low-field carrier transport in CNTs and establish a foundation for the fabrication of high-performance electronics based on hBN-supported CNTs.
- Open Access
- 17 May 2026
- Published by Wiley in Small Methods
- Vol. 10 (11) , e02417
Synergetic Effects of Alternating Oxidant and Carbon Supply to Enhance Defect Healing of Single‐Walled Carbon Nanotubes
The technological potential of carbon nanotubes (CNTs) is strongly limited by structural defects, which degrade their outstanding properties. Conventional strategies for post‐growth defect healing exhibit moderate efficiency and result in unfavorable structural alterations. Herein, we propose a two‐step ‐assisted multiple‐cycle strategy for the efficient and scalable healing of CNT defects while maintaining their structure. functions as an oxidizing agent with preferential reactivity toward defective sites such as adatoms and Stone‐Wales defects, enabling efficient etching while minimizing structural damage. In combination with , this method can substantially improve the crystallinity of CNTs, without inducing tube coalescence. The proposed approach was systematically applied to three types of single‐walled CNTs: lab‐grown CNTs, commercial eDIPS 2.0, and super‐growth CNTs. Raman spectroscopy, thermogravimetric analysis, and transmission electron microscopy confirmed the enhancement in crystallinity and thermal stability of CNTs without diameter changes, whereas isotope labeling with verified the improvements originated from defect healing rather than the growth of new CNTs. Notably, the proposed healing process improved the ratio of eDIPS 2.0 to 141, underscoring the effectiveness of this strategy. Overall, the proposed ‐assisted method shows high reproducibility, broad applicability, and superior structural preservation, establishing a scalable pathway for the post‐synthesis healing of CNTs.
- 17 May 2026
- Published by Wiley in Small Methods
- Vol. 10 (11) , e02417
Open AccessSynergetic Effects of Alternating Oxidant and Carbon Supply to Enhance Defect Healing of Single‐Walled Carbon Nanotubes
The technological potential of carbon nanotubes (CNTs) is strongly limited by structural defects, which degrade their outstanding properties. Conventional strategies for post‐growth defect healing exhibit moderate efficiency and result in unfavorable structural alterations. Herein, we propose a two‐step ‐assisted multiple‐cycle strategy for the efficient and scalable healing of CNT defects while maintaining their structure. functions as an oxidizing agent with preferential reactivity toward defective sites such as adatoms and Stone‐Wales defects, enabling efficient etching while minimizing structural damage. In combination with , this method can substantially improve the crystallinity of CNTs, without inducing tube coalescence. The proposed approach was systematically applied to three types of single‐walled CNTs: lab‐grown CNTs, commercial eDIPS 2.0, and super‐growth CNTs. Raman spectroscopy, thermogravimetric analysis, and transmission electron microscopy confirmed the enhancement in crystallinity and thermal stability of CNTs without diameter changes, whereas isotope labeling with verified the improvements originated from defect healing rather than the growth of new CNTs. Notably, the proposed healing process improved the ratio of eDIPS 2.0 to 141, underscoring the effectiveness of this strategy. Overall, the proposed ‐assisted method shows high reproducibility, broad applicability, and superior structural preservation, establishing a scalable pathway for the post‐synthesis healing of CNTs.
- 20 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (48) , 66066
Correction to “Efficient Defect Healing of Single-Walled Carbon Nanotubes through C 2 H 2 -Assisted Multiple-Cycle Treatment with Air Exposure”
- 20 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (48) , 66066
Correction to “Efficient Defect Healing of Single-Walled Carbon Nanotubes through C 2 H 2 -Assisted Multiple-Cycle Treatment with Air Exposure”
- 17 November 2025
- Published by Elsevier in Thin Solid Films
- Vol. 832
CO2-assisted nucleation of twisted graphene on graphene/SiC templates
- 17 November 2025
- Published by Elsevier in Thin Solid Films
- Vol. 832
CO2-assisted nucleation of twisted graphene on graphene/SiC templates
- Open Access
Crossover between kite growth and vibrational bridging in pillar-assisted controlled formation of carbon nanotube networks
Pillar-assisted growth is a technique in which short carbon nanotubes (CNTs) form suspended networks by growing across closely spaced microfabricated pillars. During growth, the CNT tips exhibit vibrations that allow them to bridge the neighboring pillars. To improve the complexity and controllability of the CNT networks, we introduce a kite-growth mechanism in which CNTs are elongated and aligned by gas flow during growth, enabling a longer bridging distance compared to vibrational bridging. By integrating theoretical modeling, simulations, and experimental synthesis, we found that CNT tip vibrations dominate bridging at short lengths, whereas gas flow increasingly influences alignment as CNTs grow longer. This results in a crossover behavior governed by gas flow and pillar arrangement. We also developed a bridging model based on geometric constraints to quantify the bridging behavior based on pillar spacing and angular accessibility. The statistical analysis of the resulting network structures demonstrates that the pillar arrangement significantly influences the connection types, with kite growth enabling more diverse network topologies. These findings provide design principles for tuning the density and structural complexity of suspended CNT networks, offering promising applications in nanoscale electrical interconnect wiring and three-dimensional circuit architectures.
Open AccessCrossover between kite growth and vibrational bridging in pillar-assisted controlled formation of carbon nanotube networks
Pillar-assisted growth is a technique in which short carbon nanotubes (CNTs) form suspended networks by growing across closely spaced microfabricated pillars. During growth, the CNT tips exhibit vibrations that allow them to bridge the neighboring pillars. To improve the complexity and controllability of the CNT networks, we introduce a kite-growth mechanism in which CNTs are elongated and aligned by gas flow during growth, enabling a longer bridging distance compared to vibrational bridging. By integrating theoretical modeling, simulations, and experimental synthesis, we found that CNT tip vibrations dominate bridging at short lengths, whereas gas flow increasingly influences alignment as CNTs grow longer. This results in a crossover behavior governed by gas flow and pillar arrangement. We also developed a bridging model based on geometric constraints to quantify the bridging behavior based on pillar spacing and angular accessibility. The statistical analysis of the resulting network structures demonstrates that the pillar arrangement significantly influences the connection types, with kite growth enabling more diverse network topologies. These findings provide design principles for tuning the density and structural complexity of suspended CNT networks, offering promising applications in nanoscale electrical interconnect wiring and three-dimensional circuit architectures.
- 21 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (34) , 16861-16871
Crossover between Kite Growth and Vibrational Bridging in Pillar-Assisted Controlled Formation of Carbon Nanotube Networks toward Nanoscale Interconnections
- 21 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (34) , 16861-16871
Crossover between Kite Growth and Vibrational Bridging in Pillar-Assisted Controlled Formation of Carbon Nanotube Networks toward Nanoscale Interconnections
- Open Access
Efficient defect healing of single-walled cabron nanotubes through $ \mathrm{C}_{2}\mathrm{H}_{2} $-assisted multiple-cycle treatment with air exposure
Defects in single-walled carbon nanotubes (SWCNTs) degrade their mechanical,electrical, and thermal properties, limiting their potential applications. To realize the diverse applications of SWCNTs, it is essential to enhance their crystallinity through effective defect healing. However, traditional thermal treatments typically require temperatures above 1800°C, which can alter the nanotube structure. Previously, defect healing of SWCNTs was achieved at a relatively low temperature of 1100°C, using C$_{2}$H$_{2}$ assistance, but the efficiency was limited. In this study, we developed a C$_{2}$H$_{2}$-assisted multiple-cycle process at an even lower temperature of 1000°C combined with air exposure, achieving highly efficient defect healing while preserving the nanotube structure. The combination of multiple-cycle treatment and air exposure between cycles was found to promote defect activation, suppress the formation of amorphous carbon, and enhance the effectiveness of defect healing. Additionally, we successfully healed commercially available bulk-scale SWCNTs (super-growth SWCNTs), noting that their healing behavior differed from lab-grown SWCNTs with smaller diameters synthesized from nanodiamond. The efficient and structure-preserved healing process developed in this study broadens the potential applications of high-quality SWCNTs, including flexible electronics, high-performance composites, and energy storage devices.
Open AccessEfficient defect healing of single-walled cabron nanotubes through $ \mathrm{C}_{2}\mathrm{H}_{2} $-assisted multiple-cycle treatment with air exposure
Defects in single-walled carbon nanotubes (SWCNTs) degrade their mechanical,electrical, and thermal properties, limiting their potential applications. To realize the diverse applications of SWCNTs, it is essential to enhance their crystallinity through effective defect healing. However, traditional thermal treatments typically require temperatures above 1800°C, which can alter the nanotube structure. Previously, defect healing of SWCNTs was achieved at a relatively low temperature of 1100°C, using C$_{2}$H$_{2}$ assistance, but the efficiency was limited. In this study, we developed a C$_{2}$H$_{2}$-assisted multiple-cycle process at an even lower temperature of 1000°C combined with air exposure, achieving highly efficient defect healing while preserving the nanotube structure. The combination of multiple-cycle treatment and air exposure between cycles was found to promote defect activation, suppress the formation of amorphous carbon, and enhance the effectiveness of defect healing. Additionally, we successfully healed commercially available bulk-scale SWCNTs (super-growth SWCNTs), noting that their healing behavior differed from lab-grown SWCNTs with smaller diameters synthesized from nanodiamond. The efficient and structure-preserved healing process developed in this study broadens the potential applications of high-quality SWCNTs, including flexible electronics, high-performance composites, and energy storage devices.
- 25 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (13) , 20105-20115
Efficient Defect Healing of Single-Walled Carbon Nanotubes through C2H2-Assisted Multiple-Cycle Treatment with Air Exposure
Defects in single-walled carbon nanotubes (SWCNTs) degrade their mechanical, electrical, and thermal properties, limiting their potential applications. To realize the diverse applications of SWCNTs, it is essential to enhance their crystallinity through effective defect healing. However, traditional thermal treatments typically require temperatures above 1800°C, which can alter the nanotube structure. Previously, defect healing of SWCNTs was achieved at a relatively low temperature of 1100°C, using C2H2 assistance, but the efficiency was limited. In this study, we developed a C2H2-assisted multiple-cycle process at an even lower temperature of 1000°C combined with air exposure, achieving highly efficient defect healing while preserving the nanotube structure. The combination of multiple-cycle treatment and air exposure between cycles was found to promote defect activation, suppress the formation of amorphous carbon, and enhance the effectiveness of defect healing. Additionally, we successfully healed commercially available bulk-scale SWCNTs (supergrowth SWCNTs), noting that their healing behavior differed from lab-grown SWCNTs with smaller diameters synthesized from nanodiamond. The efficient and structure-preserved healing process developed in this study broadens the potential applications of high-quality SWCNTs, including flexible electronics, high-performance composites, and energy storage devices.
- 25 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (13) , 20105-20115
Efficient Defect Healing of Single-Walled Carbon Nanotubes through C2H2-Assisted Multiple-Cycle Treatment with Air Exposure
Defects in single-walled carbon nanotubes (SWCNTs) degrade their mechanical, electrical, and thermal properties, limiting their potential applications. To realize the diverse applications of SWCNTs, it is essential to enhance their crystallinity through effective defect healing. However, traditional thermal treatments typically require temperatures above 1800°C, which can alter the nanotube structure. Previously, defect healing of SWCNTs was achieved at a relatively low temperature of 1100°C, using C2H2 assistance, but the efficiency was limited. In this study, we developed a C2H2-assisted multiple-cycle process at an even lower temperature of 1000°C combined with air exposure, achieving highly efficient defect healing while preserving the nanotube structure. The combination of multiple-cycle treatment and air exposure between cycles was found to promote defect activation, suppress the formation of amorphous carbon, and enhance the effectiveness of defect healing. Additionally, we successfully healed commercially available bulk-scale SWCNTs (supergrowth SWCNTs), noting that their healing behavior differed from lab-grown SWCNTs with smaller diameters synthesized from nanodiamond. The efficient and structure-preserved healing process developed in this study broadens the potential applications of high-quality SWCNTs, including flexible electronics, high-performance composites, and energy storage devices.
- Open Access
- 9 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 6 (8) , 5914-5922
Far-Reaching Remote Doping for Monolayer MoS2 Using a Ferroelectric Substrate: Unveiling the Impact of h-BN Spacer Thickness
- 9 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 6 (8) , 5914-5922
Open AccessFar-Reaching Remote Doping for Monolayer MoS2 Using a Ferroelectric Substrate: Unveiling the Impact of h-BN Spacer Thickness