ASAhmed Mohammed Ahmed Sabaawi

Ahmed Mohammed Ahmed Sabaawi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ahmed Mohammed Ahmed Sabaawi has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Multiband SINC-slotted Patch Antenna for 5G Applications

    by Qusai H. Sultan, Ahmed M. A. Sabaawi

    In this work, we presented the design, analysis and optimization of the multiband slotted antennas based on SINC function for 5G applications. The proposed antennas are designed and modelled by CST Studio Suite software. A parametric study is performed to determine sinc function parameters that control the performance of the proposed antenna. The parametric study is implemented by varying the amplitude of the sinc function, the frequency, the location of the slot along Y-axis, the slot width and the slot window (number of cycles). The simulated results showed that the designed slotted antennas in this paper exhibits multiband operation and they offer the feasibility of controlling and adjusting the resonant frequency by changing the sinc function parameters. The proposed antennas have various resonant frequencies at around 1.5 GHz, 2.65 GHz, 5 GHz and 5.8 GHz covering the 5G sub-6 GHz band. Extensive simulation process were carried out to determine the optimum antenna performance and three antennas were selected based on the reflection characteristics and number of operation frequency bands. Finally, the three selected antennas were manufactured and their performance were measured in the lab for validation. Experimental results showed that an excellent agreement between the measured and simulated results was achieved.

  • Open Access

    A Comprehensive Study on the Effect of Defects on Perovskite Solar Cell Performance

    by Hajar Kh Ibrahim, Ahmed M A Sabaawi, Qais Th Aljwari

    This paper focuses on the impact of defects density and carrier capture cross-section area in the electron transport material (ETM), hole transport material (HTM), and absorber layers on the performance of perovskite solar cells and quantum efficiency (QE). Furthermore, the impact of defects density at the interface between ETM/absorber and absorber/HTM is also studied. SCAPS-1D software is used in the current study in determining solar cell performance. The proposed perovskite solar cell structure is a planar FTO/TiO2/ CH3NH3PbI3/ Cu2O. The results indicated that increasing the defect density in the absorber layer significantly affects cell performance, while in ETM and HTM layers, the cell parameters remain unaffected. It is also found that the defect capture cross-section has a similar behavior to the defect density in the main layers (ETM, absorber, and HTM). In addition, it is observed that by increasing the defects density in the ETM/absorber and absorber/HTM interfaces layer, the cell parameters FF, Jsc, and PCE have been slightly decreased, with no effect on Voc. Moreover, it is also noted that the quantum efficiency QE is sharply reduced. Finally, this paper introduced the correlation between the defect density and the capture cross-section, which is the first attempt to find such a relationship in perovskite solar cells to the knowledge of the authors.


  • Open Access

    RF rectifiers with voltage doubler for wireless implantable devices

    by Doha H. Hussein, Ahmed M. A. Sabaawi

    In this paper, single- and double-stage RF rectifiers operating at 433 MHz and 915 MHz for wireless implantable devices were designed. The designed circuits were simulated by using ADS simulation tools. The circuit is simulated on a FR-4 substrate layer with dielectric constant of 4.1 and a thickness of 1.6 mm. In addition, microstrip lines were added to the circuit to connect the circuit elements and mimic the real case and achieve more accurate results. The results showed that the achieved output voltage of the singe stage rectifier was around 3.5 V with a total conversion efficiency up to 60 %. On the other hand, the 915 MHz rectifier was able to provide an output voltage of more than 1 V and a conversion efficiency of 7%. The contribution of this work is the attempt to compare the performance of the same RF rectifier but at different frequency bands.

  • Design of mmWave Multi-sector array Using Bowtie Antenna Elements for 5G Mobile Base Stations

    by Karam Mudhafar Younus, Ahmed M. A. Sabaawi

    W artykule zaproponowano kompaktową, wielosektorową strukturę macierzy opartą na elementach antenowych typu bowtie. Zaprojektowana macierz składa się z trzech (1×8) liniowych szyków pokrywających 360o. Macierz jest zaprojektowana do pracy z częstotliwością 28 GHz na podłożu RT/Duroid 5880 w celu spełnienia specyfikacji wysokiej częstotliwości przy grubości 1,575 mm i stałej dielektrycznej 2,2 przy współczynniku rozproszenia (0,0009). Każdy sektor tablicy ma wymiar 30,17 mm szerokości i 6,4 mm długości. Skuteczność sterowania wiązką została udowodniona dzięki możliwości przełączania wiązek w celu oferowania wyborów kierunkowych/wszechkierunkowych. Wyniki symulacji wykazały, że proponowana matryca wykazuje doskonałe właściwości współczynnika odbicia wraz z wysokim wzmocnieniem do 13,5 dBi i wysoką wydajnością promieniowania. Przedstawiono dwie konfiguracje sektorów matrycy w celu wprowadzenia elastycznego sterowania wiązkami matrycy. (Projektowanie wielosektorowej macierzy mmWave z wykorzystaniem elementów anteny Bowtie dla mobilnych stacji bazowych 5G)

  • Open Access

    Implantable Wireless Systems: A Review of Potentials and Challenges

    by Amenah I. Kanaan, Ahmed M.A. Sabaawi

    With the current advancement in micro-and nano-fabrication processes and the newly developed approaches, wireless implantable devices are now able to meet the demand for compact, self-powered, wireless, and long-lasting implantable devices for medical and health-care applications. The demonstrated fabrication advancement enabled the wireless implantable devices to overcome the previous limitations of electromagnetic-based wireless devices such as the high volume due to large antenna size and to overcome the tissue and bone losses related to the ultrasound implantable devices. Recent state-of-the-are wireless implantable devices can efficiently harvest electromagnetic energy and detect RF signals with minimum losses. Most of the current implanted devices are powered by batteries, which is not an ideal solution as these batteries need periodic charging and replacement. On the other hand, the implantable devices that are powered by energy harvesters are operating continuously, patient-friendly, and are easy to use. Future wireless implantable devices face a strong demand to be linked with IoT-based applications and devices with data visualization on mobile devices. This type of application requires additional units, which means more power consumption. Thus, the challenge here is to reduce the overall power consumption and increase the wireless power transfer efficiency. This chapter presents the state-of-the-art wireless power transfer techniques and approaches that are used to drive implantable devices. These techniques include inductive coupling, radiofrequency, ultrasonic, photovoltaic, and heat. The advantages and disadvantages of these approaches and techniques along with the challenges and limitations of each technique will be discussed. Furthermore, the performance parameters such as operating distance, energy harvesting efficiency, and size will be discussed and analyzed to introduce a comprehensive comparison. Finally, the recent advances in materials development and wireless communication strategies, are also discussed.


  • Open Access

    Design of multi-band millimeter wave antenna for 5G smartphones

    by Oras Ahmed Shareef, Ahmed Mohammed Ahmed Sabaawi, Karrar Shakir Muttair, Mahmood Farhan Mosleh, Mohammad Bashir Almashhdany

    The design of a millimeter wave (mmW) antenna for the 5G mobile applications is presented in this paper. The designed antenna has dimensions of 10×10×0.245 mm3. This includes the copper ground plane. The resonance of the proposed mmW antenna lies within the range of 33 GHz and 43 GHz. These frequency bands are covering the 5G proposed band in terms of the signal speed, data transmission, and high spectral efficiencies. Computer simulation technology (CST) software is used to simulate the proposed 5G antenna including the characteristics of S-parameters, gain, and radiation pattern. Simulation results show that the return loss at resonant frequencies goes -22 dB, which satisfies the requirements of 5G mobile technology.


  • Open Access

    Solar Rectennas: Analysis and Design

    by Ahmed M.A. Sabaawi, Oras Ahmed Al-Ani

    There is a growing interest in recent years on developing solar cells and increasing their conversion efficiency. This interest was motivated by the demand on producing clean and inexpensive energy, where the current solar cell technology failed to fulfill the market demand due to its low efficiency obtained. Thus, an efficient alternative is highly required to overcome the drawbacks of current photovoltaic technologies. In this chapter, the concept and operation of solar rectennas will be introduced as an efficient energy-harvesting technology and as a better alternative to conventional solar cells. Nanoantennas are used for receiving solar radiation at both visible and infrared regions as AC electromagnetic signals. The received power is then passed to a nanodiode that acts as a rectifier to convert the power from AC to DC form. Nanoarrays are utilized often to increase the captured energy and decrease the number of rectifiers of the entire system. The biggest challenge is how to design an efficient nanoantenna integrated efficiently into a nanodiode in order to maximize the overall efficiency. State-of-the-art designs for nanoantennas and nanodiodes will be highlighted in this chapter mentioning the figure of merits used to compare between one design and another.


  • Fabrication of W-band TWT for 5G small cells backhaul

    by Frederic Andre, Sophie Kohler, Viktor Krozer, Quang Trung Le, Rosa Letizia, Claudio Paoloni, Ahmed Sabaawi, Giacomo Ulisse, Ralph Zimmerman

    The W-band (92-95 GHz) Traveling Wave Tube enabling the first Point to multipoint millimeter wave backhaul wireless network is in final phase of fabrication. The challenge is to build a TWT suitable for large volume fabrication to satisfy the cost constraints of network operators. Performances are targeted to provide coverage on sectors up to 90° with 1 km range. Simulations demonstrate a bandwidth of operation in excess of 5 GHz with a saturated output power of 40 W. The TWT is directly connected to a sector horn antenna.


  • UV-LIGA microfabrication of 0.3 THz double corrugated waveguide

    by Ahmed Sabaawi, Viktor Doychinov, Storm Mathisen, David P. Steenson, Rosa Letizia, Claudio Paoloni

    A microfabrication process has been developed by using ultraviolet photolithography (UV-LIGA) with multi-layer SU-8 photoresist to create high aspect ratio Slow Wave Structures (SWS) for millimeter waves and THz vacuum electron devices. The main steps of the process will be described, applied to the fabrication of a double corrugated waveguide at 300 GHz..