TPTifa Paramitha

Tifa Paramitha

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tifa Paramitha has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Preliminary Investigation of NiO Anode for NCA/NiO Battery from Spent Catalyst Recovery

    by S S Nisa, A R Nurohmah, C S Yudha, M Rahmawati, T Paramitha, H Widiyandari, E R Dyartanti, A Purwanto

    Spent nickel catalyst is the catalyst residue that has lost its catalytic function. Spent nickel catalyst contains Ni metal which is already high and environmentally hazardous. This problem can be solved by recovering the spent nickel catalyst as an anode and combined with lithium nickel cobalt oxide (NCA) as a cathode for lithium ion batteries. A study about it has never been conducted. The method used to treat the spent catalyst was acid leaching using 1 M citric acid and 4 M hydrochloric acid at 70-80°C for 2 hours, then continued with precipitation and thermal decomposition. Another method employed was direct sintering at 800°C for 12 hours. Material characterisation was carried out by X-Ray Diffraction (XRD), Atomic Absorption Spectrophotometry (AAS), Fourier Transform Infra-Red (FTIR), and X-Ray Fluorescence (XRF), while electrochemical performance was carried out by NEWARE Battery Analyzer and BTS software. The results of this study indicate that Ni can be recovered with hydrochloric acid as much as 15.387 gr higher than citric acid as much as 11.831 gr from 20 gr sample. The XRD pattern also indicates the presence of crystals NiO I and NiO II in the leached and sintered material. The results of acid leaching in the form of NiO I was perfectly formed, but NiO still has a little impurity. Electrochemical performance was tested with a cylindrical battery resulting in a discharge capacity of 37.210 mAh g−1.


  • Open Access

    Characterization of Zeolite A from Coal Fly Ash Via Fusion-Hydrothermal Synthesis Method

    by W Wulandari, T Paramitha, J Rizkiana, D Sasongko

    Zeolite A has been successfully synthesized from coal fly ash by using fusion followed by hydrothermal method. This paper describes the characterization of zeolite A. The effects of hydrothermal time, Si/Al molar ratio, and alkalinity in the converting coal fly ash to zeolite A were also investigated. The coal fly ash was obtained from a local power plant at East Java, Indonesia and contained major oxides such as SiO2 (18.60 wt%), Al2O3 (7.18 wt%), Fe2O3 (40.20 wt%), CaO (25.20 wt%). The fusion hydrothermal method consists of the following steps: pre-treatment, fusion of coal fly ash with sodium hydroxide, aging, and hydrothermal process. The synthesized material was characterized by using X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR), and specific surface area analytical method. The results show that the products contain zeolite A as the major phase, while the highest specific surface area of zeolite A is 37.121 m2/g. It implies that zeolite A as a higher value added product can be obtained from a solid waste/by-product of power plant, which has wide range applications, including for ion exchange and heavy metal adsorbent from waste water.


  • Open Access

    Performance Evaluation of Coal Fly Ash Based Zeolite A for Heavy Metal Ions Adsorption of Wastewater

    by T Paramitha, W Wulandari, J Rizkiana, D Sasongko

    One of the environmental characteristics of chemical industries is producing wastewater effluent that containing heavy metals, which are hazardous to the aquatic life and the human health. The purpose of this research is to evaluate the use of zeolite A as a sorbent for the heavy metal ions removal from wastewater. Zeolite A was synthesized from coal fly ash by fusion-hydrothermal method by the authors contains cation exchange capacity of 5.05 meq/g. This study used a series of artificial wastewater containing one and mixed heavy metal ions (Cu (II) and Zn (II)). The result showed that wastewater containing one heavy metal ion was almost fully adsorbed, for instance percentage sorption of Cu (II) and Zn (II) ions were 95.61 % and 92.15 %. On the other hand, for binary system, the percentage sorption slightly decreased becoming 91.51 % with the increase the amount of Zn (II) ion in solution. Based on kinetic data, sorption of Cu (II) and Zn (II) ions is controlled by pseudo-second order. In addition, adsorption isotherm follows Langmuir model. From this study, it is confirmed that zeolite A has a good possibility to be used as sorbent of heavy metal ions removal in wastewater.


  • The Effect of Sintering and Soaking Temperature on the Dye-Sensitized Solar Cell Performance

    by Tifa Paramitha, Agus Purwanto

    Dye-sensitized solar cell (DSSC) is a photoelectrochemical solar cell that is able to convert solar energy into electrical energy. Sintering of TiO2film and soaking process of TiO2film in the dye solution have significant effect on the DSSC performance. The TiO2film was sintered at varied temperature from 200 °C to 500 °C for 60 minutes. From the efficiency test, it is found that the optimum performance of DSSC was produced when the TiO2film was sintered at 450 °C. In addition, the dye soaking temperature was evaluated from the temperature 40 °C to 50 °C for 6 hours. The optimum soaking temperature was 50 °C of DSSC with maximum efficiency at 2,621 %.