Le Thi Mai Hoa
Le Thi Mai Hoa has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Mau Chien Dang
Institute for Nanotechnology, Ho Chi Minh City 700000, Vietnam
5 shared publications - Didier Chaussende
Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMAP
4 shared publications - Thierry Ouisse
Université Grenoble Alpes
4 shared publications Kozo Ishizaki
2 shared publicationsNguyen Da Huyen Vo
Advanced Materials Technology Institute (AMTI), Community 33, Linh Xuan Ward, Ho Chi Minh City, Vietnam
2 shared publicationsNguyen Tai Chi
Faculty of Pharmacy, The University of Medicine and Pharmacy at Ho Chi Minh City , 41 Dinh Tien Hoang, Ben Nghe Ward, District 1, Ho Chi Minh City , Vietnam
2 shared publications
Latest Publications
- 12 August 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (8)
The Influence of Treatment Time on the Characterization of NH2 - Functionalized Multiwalled Carbon Nanotubes
In this study, multi-walled carbon nanotubes (MWCNTs) are first, oxidized using a H2SO4/ KMnO4 mixtrue to introduce carboxy (-COOH) functional groups, followed by amination with ethylenediamine (EDA) at varying reaction times (4, 8 and 12 hours). The functionalized MWCNTs were characterized by TGA), XRD, Raman spectroscopy and FE-SEM to explore changes in surface chemistry and morphology. FE-SEM images exhibited obvious morphological changes in increased surface roughnesses and the presence of nanoparticle-like structures or rather thin coatings, indicating the success of -NH2 functionalization. Raman spectroscopic analysis indicates an increase in the ID/IG ratio from 1.038 to 1.287, suggesting more defective site in the functionalized MWCNTs. The XRD patterns of the MWCNTs clearly demonstrate diffraction peak at 25.5° corresponding to (002) planes which suggested successful functionalization. The TGA curve of the -NH2 functionalized MWCNTs showed a weight loss in the temperature range from 200 to 450 °C due to the decomposition of the amine groups and the highest weight loss is obtained to be 6.6 wt% for 8 hours reaction time. The results of this study have demonstrated that the surface functionalization of the MWCNTs can be controlled by the variation of treatment times.
- 12 August 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (8)
The Influence of Treatment Time on the Characterization of NH2 - Functionalized Multiwalled Carbon Nanotubes
In this study, multi-walled carbon nanotubes (MWCNTs) are first, oxidized using a H2SO4/ KMnO4 mixtrue to introduce carboxy (-COOH) functional groups, followed by amination with ethylenediamine (EDA) at varying reaction times (4, 8 and 12 hours). The functionalized MWCNTs were characterized by TGA), XRD, Raman spectroscopy and FE-SEM to explore changes in surface chemistry and morphology. FE-SEM images exhibited obvious morphological changes in increased surface roughnesses and the presence of nanoparticle-like structures or rather thin coatings, indicating the success of -NH2 functionalization. Raman spectroscopic analysis indicates an increase in the ID/IG ratio from 1.038 to 1.287, suggesting more defective site in the functionalized MWCNTs. The XRD patterns of the MWCNTs clearly demonstrate diffraction peak at 25.5° corresponding to (002) planes which suggested successful functionalization. The TGA curve of the -NH2 functionalized MWCNTs showed a weight loss in the temperature range from 200 to 450 °C due to the decomposition of the amine groups and the highest weight loss is obtained to be 6.6 wt% for 8 hours reaction time. The results of this study have demonstrated that the surface functionalization of the MWCNTs can be controlled by the variation of treatment times.
- 31 May 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (7) , 075901
Effect of MWCNTs surface functionalization on the characterization of PVA/MWCNTs nanocomposites
The present study aims to put forward the role of surface functionalization of multi-walled carbon nanotubes (MWCNTs) on the enhancement thermal and hydrophilicity properties of new nanocomposite based poly(vinyl alcohol)/surface functionalized MWCNTs (PVA/MWCNTs), prepared by a facile phase inversion process. In this study, the fabrication of PVA/MWCNTs nanocomposites is carried out using functionalized MWCNTs (f-MWCNTs) with different functional groups (–OH, –COOH, –NH2). The structural, morphological, thermal, hydrophilicity and physico-chemical properties of PVA/MWCNTs nanocomposites are characterized by XRD, FE-SEM, FT-IR, TGA and contact angle measurement. The FT-IR results confirm the formation of a hydrogen bond between MWCNTs and PVA chain. XRD analysis indicates an improvement in the crystallinity of the PVA/MWCNTs nanocomposite. TGA results reveal that the PVA/f-MWCNTs nanocomposites show higher thermal stability than pure PVA. It is revealed that PVA/MWCNTs nanocomposites based functionalized MWCNTs remarkably increase the degradation temperature, and thus enhancing the thermal properties. The highest weight loss (30.7 wt%) and degradation temperature (520 °C) values are obtained with PVA/f-MWCNTs(0.5 wt%). The contact angle measurement confirms that the hydrophobic properties of pure PVA became hydrophilic because of the functional groups of MWCNTs. The hydrophilicity of PVA/MWCNTs nanocomposites is increased with the increase in wt% of MWCNTs embedded in the nanocomposite.
- 31 May 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (7) , 075901
Effect of MWCNTs surface functionalization on the characterization of PVA/MWCNTs nanocomposites
The present study aims to put forward the role of surface functionalization of multi-walled carbon nanotubes (MWCNTs) on the enhancement thermal and hydrophilicity properties of new nanocomposite based poly(vinyl alcohol)/surface functionalized MWCNTs (PVA/MWCNTs), prepared by a facile phase inversion process. In this study, the fabrication of PVA/MWCNTs nanocomposites is carried out using functionalized MWCNTs (f-MWCNTs) with different functional groups (–OH, –COOH, –NH2). The structural, morphological, thermal, hydrophilicity and physico-chemical properties of PVA/MWCNTs nanocomposites are characterized by XRD, FE-SEM, FT-IR, TGA and contact angle measurement. The FT-IR results confirm the formation of a hydrogen bond between MWCNTs and PVA chain. XRD analysis indicates an improvement in the crystallinity of the PVA/MWCNTs nanocomposite. TGA results reveal that the PVA/f-MWCNTs nanocomposites show higher thermal stability than pure PVA. It is revealed that PVA/MWCNTs nanocomposites based functionalized MWCNTs remarkably increase the degradation temperature, and thus enhancing the thermal properties. The highest weight loss (30.7 wt%) and degradation temperature (520 °C) values are obtained with PVA/f-MWCNTs(0.5 wt%). The contact angle measurement confirms that the hydrophobic properties of pure PVA became hydrophilic because of the functional groups of MWCNTs. The hydrophilicity of PVA/MWCNTs nanocomposites is increased with the increase in wt% of MWCNTs embedded in the nanocomposite.
- 1 January 2023
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 12 (1) , 011003
The Influence of MWCNTs Amounts and PVP Aqueous Solutions on the Properties of PVA/PVP/MWCNTs Nanocomposite Membranes
In this article, the surface functionalization of multi-walled carbon nanotubes (MWCNTs) is performed using a tris(2-aminoethyl)amine (TAA) to generate functional moieties (−NH2) on the surface. The functionalized MWCNTs (f-MWCNTs) are incorporated in the blend polymers of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) to fabricate a nanocomposite membrane via phase inversion process, which are named PVA/PVP/f-MWCNT. The nanocomposite membranes are characterized by a field emission scanning electron microscopy (FE-SEM), fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), water contact angle. The FE-SEM images show that the PVA/PVP/f-MWCNTs nanocomposite membrane consisting 0.01 g of f-MWCNTs exhibits a uniform morphology and good dispersion of f-MWCNTs. The X-ray results demonstrate that the incorporation of f-MWCNTs has successfully changed the structural properties of the nanocomposite membranes. TGA analysis indicates that the PVA/PVP/f-MWCNTs nanocomposite membranes exhibit higher thermal properties than the pristine PVA/PVP blend membrane. The weight loss within 420 °C–550 °C is increased from 34.62 to 55.66% with increasing the PVP content from 1 wt% to 8 wt%, respectively. The contact angle measurements indicate that addition of f-MWCNTs to the PVA/PVP blend membrane has improved hydrophilic properties.
- 1 January 2023
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 12 (1) , 011003
The Influence of MWCNTs Amounts and PVP Aqueous Solutions on the Properties of PVA/PVP/MWCNTs Nanocomposite Membranes
In this article, the surface functionalization of multi-walled carbon nanotubes (MWCNTs) is performed using a tris(2-aminoethyl)amine (TAA) to generate functional moieties (−NH2) on the surface. The functionalized MWCNTs (f-MWCNTs) are incorporated in the blend polymers of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) to fabricate a nanocomposite membrane via phase inversion process, which are named PVA/PVP/f-MWCNT. The nanocomposite membranes are characterized by a field emission scanning electron microscopy (FE-SEM), fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), water contact angle. The FE-SEM images show that the PVA/PVP/f-MWCNTs nanocomposite membrane consisting 0.01 g of f-MWCNTs exhibits a uniform morphology and good dispersion of f-MWCNTs. The X-ray results demonstrate that the incorporation of f-MWCNTs has successfully changed the structural properties of the nanocomposite membranes. TGA analysis indicates that the PVA/PVP/f-MWCNTs nanocomposite membranes exhibit higher thermal properties than the pristine PVA/PVP blend membrane. The weight loss within 420 °C–550 °C is increased from 34.62 to 55.66% with increasing the PVP content from 1 wt% to 8 wt%, respectively. The contact angle measurements indicate that addition of f-MWCNTs to the PVA/PVP blend membrane has improved hydrophilic properties.
- 1 November 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (11) , 111004
A Study on the Effects of Potassium Permanganate on the Functionalization of Multi-Walled Carbon Nanotubes
In this work, multi-walled carbon nanotubes (MWCNTs) are functionalized by a wet chemical oxidation method using a mixture of potassium permanganate (KMnO 4 ) and sulfuric acid (H 2 SO 4 ) at 70 °C, for 12 h. The effects of various KMnO 4 amounts on the functionalization of MWCNTs are studied and reported. The surface morphologies, structural properties, dispersion and thermal stability of the MWCNTs are characterized using a field emission scanning electron microscope (FE-SEM), Raman spectroscopy, UV-visible spectroscopy (UV–vis), thermal gravimetric analysis (TGA). The FE-SEM images display some surface roughness, cutting and open ends of functionalized MWCNTs (f-MWCNTs). The TGA curves of f-MWCNTs indicate a weight loss between 150 °C and 350 °C, which is attributed to the loss of carboxyl groups on the MWCNTs surface and the weight loss is increased when KMnO 4 mass is increased. The highest weight loss value of 22.23% is recorded for the oxidation treatment with a mixture of 5 M H 2 SO 4 and 200 mg KMnO 4 . UV–vis measurements indicate that the f-MWCNTs are highly dispersed in the aquoues solution in comparision to the pristine MWCNTs (p-MWCNTs). And f-MWCNTs with higher functionalization degree show better dispersibility. This study provides a great prospect of effective method to cut, end-open, functionalize and disperse MWCNTs.
- 1 November 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (11) , 111004
A Study on the Effects of Potassium Permanganate on the Functionalization of Multi-Walled Carbon Nanotubes
In this work, multi-walled carbon nanotubes (MWCNTs) are functionalized by a wet chemical oxidation method using a mixture of potassium permanganate (KMnO 4 ) and sulfuric acid (H 2 SO 4 ) at 70 °C, for 12 h. The effects of various KMnO 4 amounts on the functionalization of MWCNTs are studied and reported. The surface morphologies, structural properties, dispersion and thermal stability of the MWCNTs are characterized using a field emission scanning electron microscope (FE-SEM), Raman spectroscopy, UV-visible spectroscopy (UV–vis), thermal gravimetric analysis (TGA). The FE-SEM images display some surface roughness, cutting and open ends of functionalized MWCNTs (f-MWCNTs). The TGA curves of f-MWCNTs indicate a weight loss between 150 °C and 350 °C, which is attributed to the loss of carboxyl groups on the MWCNTs surface and the weight loss is increased when KMnO 4 mass is increased. The highest weight loss value of 22.23% is recorded for the oxidation treatment with a mixture of 5 M H 2 SO 4 and 200 mg KMnO 4 . UV–vis measurements indicate that the f-MWCNTs are highly dispersed in the aquoues solution in comparision to the pristine MWCNTs (p-MWCNTs). And f-MWCNTs with higher functionalization degree show better dispersibility. This study provides a great prospect of effective method to cut, end-open, functionalize and disperse MWCNTs.
- 1 March 2020
- Published by IOP Publishing in Advances in Natural Sciences: Nanoscience and Nanotechnology
- Vol. 11 (1) , 015018
Functionalisation of multi-walled carbon nanotubes by esterification method for poly(ethylene)glycol attachment and their characterization
In this study, we have successfully functionalised multi-walled carbon nanotubes (MWCNT) surfaces with poly(ethylene)glycol (PEG) via an esterification method in which the oxygenated functional groups are created by chemical oxidations with a mixture of nitric acid and sulfuric acid solutions (ratio of 1:3, v/v), and then it is reacted with functional groups of PEG. Different techniques including FE-SEM, TEM, EDS, FT-IR spectrometry, Raman spectroscopy and TGA are applied to identify the characteristics of MWCNTs. The effects of catalyst and different mass ratios of PEG:MWCNTs on the characteristics of MWCNTs are investigated for the first time. The TGA analysis indicates that when the mass ratio of PEG:MWCNTs is 140:1, the highest weight loss of 30.86 wt% is obtained. Additionally, an increase in the amounts of catalysts decreases the content of PEG attached on the nanotubes. The catalyst of 0.3 ml H 2 SO 4 and the mass ratio of PEG:MWCNTs = 140:1 demonstrates to be the most effective for PEG functionalised MWCNTs. It can be chosen as the best experimental conditions to perform PEG functionalised MWCNTs.
- 1 March 2020
- Published by IOP Publishing in Advances in Natural Sciences: Nanoscience and Nanotechnology
- Vol. 11 (1) , 015018
Functionalisation of multi-walled carbon nanotubes by esterification method for poly(ethylene)glycol attachment and their characterization
In this study, we have successfully functionalised multi-walled carbon nanotubes (MWCNT) surfaces with poly(ethylene)glycol (PEG) via an esterification method in which the oxygenated functional groups are created by chemical oxidations with a mixture of nitric acid and sulfuric acid solutions (ratio of 1:3, v/v), and then it is reacted with functional groups of PEG. Different techniques including FE-SEM, TEM, EDS, FT-IR spectrometry, Raman spectroscopy and TGA are applied to identify the characteristics of MWCNTs. The effects of catalyst and different mass ratios of PEG:MWCNTs on the characteristics of MWCNTs are investigated for the first time. The TGA analysis indicates that when the mass ratio of PEG:MWCNTs is 140:1, the highest weight loss of 30.86 wt% is obtained. Additionally, an increase in the amounts of catalysts decreases the content of PEG attached on the nanotubes. The catalyst of 0.3 ml H 2 SO 4 and the mass ratio of PEG:MWCNTs = 140:1 demonstrates to be the most effective for PEG functionalised MWCNTs. It can be chosen as the best experimental conditions to perform PEG functionalised MWCNTs.
- 14 October 2019
- Published by IOP Publishing in Advances in Natural Sciences: Nanoscience and Nanotechnology
- Vol. 10 (4) , 045004
The influence of treatment time on multi-walled carbon nanotubes functionalized by poly(ethylene glycol)
The paper reports an influence of treatment duration on the characteristics of multi-walled carbon nanotubes (MWCNTs) functionalised by poly(ethylene glycol) (PEG) for the first time. MWCNTs covalently functionalised with PEG (MWCNTs-PEG) are successfully prepared and characterised by several techniques including FE-SEM, EDX, Raman spectroscopy and TGA. The FE-SEM images show that an average tube diameter of the MWCNTs-PEG is increased by 21% in comparison to pristine MWCNTs. According to the TGA analysis and EDX measurements, the highest weight loss of 21.31 wt% and the highest ratio of oxygen to carbon (O/C) of 22.26 % are simultaneously achieved for the treatment time of 6 h. The results allow us to conclude that the optimum time to obtain the best functionalisation result is 6 h.
- 14 October 2019
- Published by IOP Publishing in Advances in Natural Sciences: Nanoscience and Nanotechnology
- Vol. 10 (4) , 045004
The influence of treatment time on multi-walled carbon nanotubes functionalized by poly(ethylene glycol)
The paper reports an influence of treatment duration on the characteristics of multi-walled carbon nanotubes (MWCNTs) functionalised by poly(ethylene glycol) (PEG) for the first time. MWCNTs covalently functionalised with PEG (MWCNTs-PEG) are successfully prepared and characterised by several techniques including FE-SEM, EDX, Raman spectroscopy and TGA. The FE-SEM images show that an average tube diameter of the MWCNTs-PEG is increased by 21% in comparison to pristine MWCNTs. According to the TGA analysis and EDX measurements, the highest weight loss of 21.31 wt% and the highest ratio of oxygen to carbon (O/C) of 22.26 % are simultaneously achieved for the treatment time of 6 h. The results allow us to conclude that the optimum time to obtain the best functionalisation result is 6 h.
- 1 October 2018
- Published by Elsevier in Diamond and Related Materials
- Vol. 89, 43-51
Characterization of multi-walled carbon nanotubes functionalized by a mixture of HNO3/H2SO4
- 1 October 2018
- Published by Elsevier in Diamond and Related Materials
- Vol. 89, 43-51
Characterization of multi-walled carbon nanotubes functionalized by a mixture of HNO3/H2SO4
- 1 January 2018
- Published by Inderscience Publishers in International Journal of Nanotechnology
- Vol. 15 (11/12) , 1024-1038
Electrochemical sensor chips for multiple measurements of dissolved oxygen, pH and oxidation-reduction potential in aquacultural farming
Dissolved oxygen (DO), pH and oxidation-reduction potential (ORP) are important parameters of water quality in aquacultural farming and these parameters need to be monitored continuously. In this paper we report fabrication and characterisation of electrochemical sensor chips with pairs of platinum (Pt) electrodes and Ag/AgCl electrodes to measure multiple parameters including DO, pH and ORP with low cost and simple operation. The platinum electrodes were fabricated by lithography, sputtering and lift-off techniques. The fabricated platinum electrodes were used as working and counter electrodes and a silver/silver chloride (Ag/AgCl) was used as a reference electrode. To measure DO, cyclic voltammetry (CV) measurements were performed when the platinum electrodes were dipped in pH buffer solutions as DO levels ranged from 1.5 to 26 ppm. The CV results showed the increase in current related to the reduction peak of oxygen when DO concentration increased. The correlation of the current and DO levels was also determined. The ORP of various electrolyte solutions which have different pH and ORP values was determined by open circuit potential (OCP) measurements. The correlation of OCP values, pH and ORP values was investigated. The stability of ORP values and durability of the fabricated electrodes were also studied. The results exhibited the possibility of using the fabricated electrode chips for multiple measurements of DO, pH and ORP in aquacultural farming.
- 1 January 2018
- Published by Inderscience Publishers in International Journal of Nanotechnology
- Vol. 15 (11/12) , 1024-1038
Electrochemical sensor chips for multiple measurements of dissolved oxygen, pH and oxidation-reduction potential in aquacultural farming
Dissolved oxygen (DO), pH and oxidation-reduction potential (ORP) are important parameters of water quality in aquacultural farming and these parameters need to be monitored continuously. In this paper we report fabrication and characterisation of electrochemical sensor chips with pairs of platinum (Pt) electrodes and Ag/AgCl electrodes to measure multiple parameters including DO, pH and ORP with low cost and simple operation. The platinum electrodes were fabricated by lithography, sputtering and lift-off techniques. The fabricated platinum electrodes were used as working and counter electrodes and a silver/silver chloride (Ag/AgCl) was used as a reference electrode. To measure DO, cyclic voltammetry (CV) measurements were performed when the platinum electrodes were dipped in pH buffer solutions as DO levels ranged from 1.5 to 26 ppm. The CV results showed the increase in current related to the reduction peak of oxygen when DO concentration increased. The correlation of the current and DO levels was also determined. The ORP of various electrolyte solutions which have different pH and ORP values was determined by open circuit potential (OCP) measurements. The correlation of OCP values, pH and ORP values was investigated. The stability of ORP values and durability of the fabricated electrodes were also studied. The results exhibited the possibility of using the fabricated electrode chips for multiple measurements of DO, pH and ORP in aquacultural farming.
- 6 October 2014
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 14 (11) , 5761-5766
Birefringence Microscopy of Unit Dislocations in Diamond
- 6 October 2014
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 14 (11) , 5761-5766
Birefringence Microscopy of Unit Dislocations in Diamond
- 1 September 2012
- Published by Elsevier in Journal of Crystal Growth
- Vol. 354 (1) , 202-207
Critical assessment of birefringence imaging of dislocations in 6H silicon carbide
- 1 September 2012
- Published by Elsevier in Journal of Crystal Growth
- Vol. 354 (1) , 202-207
Critical assessment of birefringence imaging of dislocations in 6H silicon carbide