MFMatthew Charles Frank

Matthew Charles Frank

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Matthew Charles Frank has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design for Manufacturing: Geometric Manufacturability Evaluation for Five-Axis Milling

    by Niechen Chen, Matthew C. Frank

    The geometric manufacturability of a part design is an important decision factor for various manufacturing applications and is especially critical for the machining process. In machining, the geometric manufacturability is primarily determined by geometric accessibility, which has a direct impact on decisions such as setup planning, tool selection, tool orientation selection/adjustment, and the tool path strategies. These planning decisions can have a significant impact on cycle time and cost. Thus, it can be justified that geometric manufacturability is one of the essential product design aspects that must be evaluated for machining processes. Being able to evaluate the geometric manufacturability will not only provide a part design metric but also offer a new approach for manufacturing process planning and optimization. This research proposes a new method for determining the geometric manufacturability of a part designed for five-axis milling. In this work, the part design is input as polygon mesh boundary represented models, the 3D tool geometry is sampled to line segments, the 3D geometric accessibility of the part design is calculated, and a new metric for five-axis milling manufacturability evaluation is developed. Case studies on complex mechanical component design examples are conducted to validate the method.


  • Design for Manufacturability-Based Feedback to Mitigate Design Fixation

    by Esraa S. Abdelall, Matthew C. Frank, Richard T. Stone

    This study assessed the effectiveness of three-dimensional (3D) visual feedback from design for manufacturability (DFM) software on mitigating design fixation on nonproducible manufacturability features. A fixation group and a defixation group were asked to design a basic product for additive manufacturing (AM) and then to modify the next iteration for conventional machining. The fixation group relied on their self-assessment while modifying, while the defixation group utilized dfm software feedback. Results showed that 3D feedback reduced design fixation on nonproducible features and improved the machinability of modified designs. Findings suggest the use of dfm software for treating the design fixation related to AM and for facilitating migration of designs from additive to conventional manufacturing. This work could be applied to manufacturing industries, particularly where AM is used for prototyping, or when demand for part changes and an AM part needs to migrate to conventional methods.


  • A Study of Design Fixation Related to Additive Manufacturing

    by Esraa S. Abdelall, Matthew C. Frank, Richard T. Stone

    This study aims to understand the effect of additive manufacturing (AM) on design fixation. Whereas previous research illustrates the positive aspects of AM, the overarching hypothesis of this work is that it might also have negative effects with respect to conventional manufacturability. In this work, participants from two groups, a design for conventional manufacturing (DfCM) group, and a design for additive manufacturing (DfAM) group, were asked to design a basic product. Then, a second iteration of the design asked both groups to design for conventional processes, and to include subtractive and formative methods like machining and casting, respectively. Findings showed that the DfAM fixated on nonproducible manufacturing features and produced harder to conventionally manufacture designs, even when told specifically to DfCM. There was also evidence that the complex designs of the DfAM group limited their modeling success and seemed to encourage them to violate more design constraints. This study draws attention to the negative effect of AM knowledge on designers and provides motivation for treatment methods. This is important if AM is used in prototyping or short run production of parts that are slated for conventional manufacturing later. The issue of design fixation is not a problem if AM is the final manufacturing method—a more common practice nowadays. This work suggests that one should consider the possibility of fixation in design environments where AM precedes larger volume conventional manufacturing.


  • Automated Manufacturing Process Selection During Conceptual Design

    by Michael J. Hoefer, Matthew C. Frank

    This paper presents a method for automated manufacturing process selection during conceptual design. It is helpful to know which manufacturing processes can produce a design at an early stage, when the overall design can be changed for less cost. Early during new product development, geometric dimensions and tolerances may not yet be specified, but a general three-dimensional (3D) model is often under development. In this work, algorithms are presented to interrogate 3D models to calculate machining-based manufacturability metrics. These algorithms are used on a dataset of 86 computer-aided design (CAD) models classified as machined or cast-then-machined. The metrics, such as visibility, reachability, and setup orientations, seek to characterize a part's manufacturability using machining domain knowledge. These metrics serve as inputs to machine learning models, which are used to classify parts by manufacturing process with 86% accuracy. Some of the incorrectly classified parts were instances that had robust designs capable of being manufactured using machining or casting. The results of the machine learning models indicate that the machining metrics can be used to provide process selection feedback during conceptual design.


  • A Semiautomatic, Cleaning Room Grinding Method for the Metalcasting Industry

    by Danni Wang, Frank E. Peters, Matthew C. Frank

    This paper presents a semi-automated grinding system for the postprocessing of metalcastings. Grinding is an important procedure in the “cleaning room” of a foundry, where the removal of gate contacts, parting line flash, surface defects, and weld-repaired areas is performed, and almost always manually. While the grinding of repetitive locations on medium to high production castings can be automated using robotics or otherwise, it is not as practical for larger castings (e.g., > 200 kg) that are typically produced in smaller production volumes. Furthermore, automation is even more challenging in that the locations of the required grinding are not a constant depending on the unique conditions and anomalies of each pouring of a component. The proposed approach is intended for a simple x−y−z positioner (gantry) device with a feedback controlled grinding head that enables automated path planning. The process begins with touch probing of the surfaces that contain the anomaly requiring grinding, and then the system automatically handles the path planning and force control to remove the anomaly. A layer-based algorithm for path planning employs a search-and-destroy technique where the surrounding geometry is interpolated across the grind-requiring surface patch. In this manner, each unique condition of the casting surface after initial torch or saw cutting can be handled cost effectively without the need for human shaping and the egregious ergonomic problems associated. Implementation of the proposed grinding control is prototyped at a lab scale to demonstrate the feasibility and versatility of this strategy. The average error for the prototype was on the order of 0.007 in (0.2 mm) with a flatness of the ground surface within 0.035 in (0.9 mm), which is within the cleaning room grinding requirements, as per ISO and ASTM dimensional and surface tolerance requirements. A significant contribution of the work is the layer-based algorithm that allows an effective automation of the process planning for grinding, avoiding robot programming or numerical control code generation altogether. This is a key to addressing the largely unknown and unpredictable conditions of, for example, the riser contact surface removal area on a metalcasting.


  • Open Access

    Evaluation of Design Feedback Modality in Design for Manufacturability

    by Prashant Barnawal, Michael C. Dorneich, Matthew C. Frank, Frank Peters

    The early conceptual design phase often focuses on functional requirements, with limited consideration of the manufacturing processes needed to turn design engineers' conceptual models into physical products. Increasingly, design and manufacturing engineers no longer work in physical proximity, which has slowed the feedback cycle and increased product lead-time. Design for manufacturability (DFM) techniques have been adopted to overcome this problem and are critical for faster convergence to a manufacturable design. DFM tools give feedback in textual and graphical modalities. However, since information modality may affect interpretability, empirical evidence is needed to understand how manufacturability feedback modalities affect design engineers' work. A user study evaluated how novice design engineers' design performance, workload, confidence, and feedback usability were affected by textual, two-dimensional (2D), and three-dimensional (3D) feedback modalities. Results showed that graphical feedback significantly improved performance and reduced mental workload compared to textual and no feedback. Differences between 3D and 2D feedback were mixed. Three-dimensional was generally better on average, but not significantly so. However, the usability of 3D was significantly higher than 2D. Conversely, providing feedback in textual modality was often no better than not providing feedback. The study will benefit manufacturing industries by demonstrating that early 3D manufacturability feedback improves novice design engineers' performance with less mental workload and streamlines the design process resulting in cost-saving and reduction of product lead-time.


  • Computing the Global Visibility Map Using Slice Geometry for Setup Planning

    by Guangyu Hou, Matthew C. Frank

    This paper introduces a new method that uses slice geometry to compute the global visibility map (GVM). Global visibility mapping is a fundamentally important process that extracts geometric information about an object, which can be used to solve hard problems, for example, setup and process planning in computer numerical control (CNC) machining. In this work, we present a method for creating the GVM from slice data of polyhedron models, and then show how it can help determine around which axis of rotation a part can be machined. There have been various methods of calculating the GVM to date, tracing back to the well-known seminal methods that use Gaussian mapping. Compared to the considerable amount of work in this field, the proposed method has an advantage of starting from feature-free models like stereolithography (STL) files and has adjustable resolution. Moreover, since it is built upon slicing the model, the method is embarrassingly parallelizable in nature, thus suitable for high-performance computing. Using the GVM obtained by this method, we generate an axis of rotation map to facilitate the setup planning for four-axis CNC milling machines as one implementation example.


  • Rapid tooling using friction stir welding and machining

    by Esraa Saleh Abdel-All, Matthew Charles Frank, Iris Violeta Rivero

    Purpose: This paper aims to present a friction stir molding (FSM) method for the rapid manufacturing of metal tooling. The method uses additive and subtractive techniques to sequentially friction stir bond and then mill slabs of metal. Mold tooling is grown in a bottom-up fashion, overcoming machining accessibility problems typically associated with deep cavity tooling. Design/methodology/approach: To test the feasibility of FSM in building functional molds, a layer addition procedure that combines friction stir spot welding (FSSW) with an initial glue application and clamping for slabs of AA6061-T651 was investigated. Additionally, FSSW parameters and the mechanical behavior of test mold materials, including shear strength and hardness, were studied. Further, scanning electron microscopy (SEM)/elemental map analysis (EDS) of the spot weld zones was carried out to understand the effect of FSSW on the glue materials and to study potential mixing of glue with the plate materials in the welded zone. Findings: The results indicate that FSM provides good layer stacking without gaps when slabs are pre-processed through sand blasting, moistening, uniform clamping and FSSW using a tapered pin tool. The tensile shear strength results revealed that the welded spots were able to withstand cutting forces during machining stages; however, FSSW was found to cause hardness reduction among spot zones because of over-aging. The SEM/EDS results showed that glue was not mixed with slab materials in spot zones. The proposed process was able to build a test tooling sample successfully using AA6061-T651 plates welded and machined on a three-axis computer numerical control (CNC) mill. Originality/value: The proposed FSM process is a new process presented by the authors, developed for the rapid manufacturing of metal tooling. The method uses additive and subtractive techniques to sequentially friction stir bond and then mill slabs of metal. The use of FSSW process for materials addition is an original contribution that enables automatic process planning for this new process.


  • Automated Composite Fabric Layup for Wind Turbine Blades

    by Siqi Zhu, Corey J. Magnussen, Emily L. Judd, Matthew C. Frank, Frank E. Peters

    This work presents an automated fabric layup solution based on a new method to deform fiberglass fabric, referred to as shifting, for the layup of noncrimp fabric (NCF) plies. The shifting method is intended for fabric with tows only in 0 deg (warp) and 90 deg (weft) directions, where the fabric is sequentially constrained and then rotated through a deformation angle to approximate curvature. Shifting is conducted in a two-dimensional (2D) plane, making the process easy to control and automate, but can be applied for fabric placement in three-dimensional (3D) models, either directly or after a ply kitting process and then manually placed. Preliminary tests have been conducted to evaluate the physical plausibility of the shifting method. Layup tests show that shifting can deposit fabric accurately and repeatedly while avoiding out-of-plane deformation.


  • Design and Evaluation of Designer Feedback System in Design for Manufacturability

    by Prashant Barnawal, Michael C. Dorneich, Frank Peters, Matthew C. Frank

    The aim of the study is to develop and evaluate a prototype designer feedback tool to give manufacturability feedback information to design engineers early at the conceptual design stage. Providing design engineers early manufacturability information on their designs helps them to improve manufacturing quality of their designs thus reducing the overall cost and lead time to manufacture. The Three Dimensional Integrated Feedback (3DIF) system is designed to be a manufacturing visualization feedback tool that is generalizable, automated, usable, inexpensive and portable. Feedback given to design engineers can be in various modalities, including verbal, text, 2D drawings, or 3D. Information abstraction and modality significantly affect its interpretation, so it is important that feedback given to the design engineers should be in the language understandable to them and is able to convey necessary information with minimal interpretation. An experiment has been designed to evaluate performance and workload differences between expert and novice design engineers when they conduct design tasks in feedback modalities. The preliminary results from the study show that providing feedback in 3D improves the manufacturing quality of the end design with lower overall cognitive workload.