Tengyu He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tengyu He has a total of 106 co-authors. Here are the top co-authors by number of shared publications:
- Jesse Vincent Jokerst
University of California San Diego
24 shared publications - Wonjun Yim
Massachusetts Institute of Technology
20 shared publications - Zhicheng Jin
Aiiso Yufeng Li Family Department of Chemical and Nano Engineering University of California San Diego California USA
19 shared publications - Jiajing Zhou
College of Biomass Science and Engineering, Key Laboratory of Leather Chemistry and Engineering of Ministry of Education, National Engineering Laboratory for Clean Technology of Leather Manufacture, Sichuan University, Chengdu, China
17 shared publications - Ming Xu
Department of NanoEngineering University of California San Diego 9500 Gilman Drive La Jolla CA 92093 USA
13 shared publications Yong Cheng
Department of NanoEngineering University of California San Diego 9500 Gilman Drive La Jolla CA 92093 USA
12 shared publications
Latest Publications
- 29 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (63)
Nanoconjugate Strategy Integrating Immunogenic Cell Death Induction and Innate Immune Activation for Potent Anti‐Cancer Immunity
In vivo immune modulation can potentially benefit broader cancer patients. Efficient cross‐priming of anti‐tumor T cells requires “three‐signal” dendritic cells (DCs) that simultaneously integrate antigenic, co‐stimulatory, and migratory programs, which remains a major challenge. Here, we developed a carrier‐free peptide–cyclic dinucleotide (CDN) nanoconjugate (PCN) that co‐activates immunogenic cell death (ICD) in tumors and stimulator of interferon genes (STING) signaling in DCs. Library screening identified ICD‐inducing peptides enriched in hydrophobic and cationic residues that promote self‐assembly, cell penetration, and ICD potency. Mechanistic studies revealed peptides can trigger overlapping pyroptosis, necroptosis, and apoptosis, with lysosomal damage and cathepsin release as dominant upstream drivers. PCN promoted tumor‐antigen release and facilitated cytosolic CDN delivery for robust STING activation. This dual functionality induced early cytokine and chemokine responses and generated cDC1‐enriched “three‐signal” migratory DCs trafficking from tumors to draining lymph nodes, resulting in enhanced antigen‐specific CD8 + T‐cell activation and memory formation. PCN also broadly reprogrammed the tumor microenvironment toward anti‐tumor immunity. In preclinical models, PCN induced complete tumor rejection in 70% of B16‐F10‐ or CT26‐bearing mice and provided durable protection against tumor rechallenge when combined with α ‐PD‐1.
- 29 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (63)
Nanoconjugate Strategy Integrating Immunogenic Cell Death Induction and Innate Immune Activation for Potent Anti‐Cancer Immunity
In vivo immune modulation can potentially benefit broader cancer patients. Efficient cross‐priming of anti‐tumor T cells requires “three‐signal” dendritic cells (DCs) that simultaneously integrate antigenic, co‐stimulatory, and migratory programs, which remains a major challenge. Here, we developed a carrier‐free peptide–cyclic dinucleotide (CDN) nanoconjugate (PCN) that co‐activates immunogenic cell death (ICD) in tumors and stimulator of interferon genes (STING) signaling in DCs. Library screening identified ICD‐inducing peptides enriched in hydrophobic and cationic residues that promote self‐assembly, cell penetration, and ICD potency. Mechanistic studies revealed peptides can trigger overlapping pyroptosis, necroptosis, and apoptosis, with lysosomal damage and cathepsin release as dominant upstream drivers. PCN promoted tumor‐antigen release and facilitated cytosolic CDN delivery for robust STING activation. This dual functionality induced early cytokine and chemokine responses and generated cDC1‐enriched “three‐signal” migratory DCs trafficking from tumors to draining lymph nodes, resulting in enhanced antigen‐specific CD8 + T‐cell activation and memory formation. PCN also broadly reprogrammed the tumor microenvironment toward anti‐tumor immunity. In preclinical models, PCN induced complete tumor rejection in 70% of B16‐F10‐ or CT26‐bearing mice and provided durable protection against tumor rechallenge when combined with α ‐PD‐1.
- 1 October 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (19) , 7588-7602
β-Sheet Structures Enhance Aggregation-Induced Emission Signals in Peptide-Based Coacervates
Phase-separating peptides (PSPs) are known to undergo liquid–liquid phase separation (LLPS) to produce coacervates with applications in bioimaging, drug delivery, and theranostics. However, the structure–function relationship of the peptide building blocks remains unclear. Here, we used an aggregation-induced emission reporter to study how different β-sheet promoters impact coacervation. We synthesized an anionic Asp-peptide (D10) and a cationic Arg-peptide (R10) covalently conjugated to tetraphenylethene pyridinium (PyTPE)—an aggregation-induced emission generator (AIEgen). We included several spacer units composed of β-sheet-promoting self-assembling peptides (F2G2, W2G2, FFVLK, and GFFYK) between the AIEgen and R10 and investigated their size and AIE intensities after coacervation. The properties of the coacervates vary with endogenous factors (peptide sequence, number of Arg and Asp residues, charge ratio, and total charge equivalent concentration of peptides), exogenous factors (pH, ionic strength, salts), and the β-sheet content of the constituting peptide. We observed that a minimum 10 mM phosphate buffer salt concentration, pH 4–12, total charge equivalent concentration of 0.8 mM, and charge ratio (R10/D10) of 0.5 are required for 100% peptide complexation. Peptides containing the FFVLK sequence exhibited the highest AIE (~450-fold) with the capability to form self-coacervates in phosphate buffer. The W2G2 motif had negligible activation. Finally, we confirmed that the coacervates retain their shape after intracellularly labeling murine colon adenocarcinoma cells (MC38) via caveolae-mediated endocytosis with >95% cell viability.
- 1 October 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (19) , 7588-7602
β-Sheet Structures Enhance Aggregation-Induced Emission Signals in Peptide-Based Coacervates
Phase-separating peptides (PSPs) are known to undergo liquid–liquid phase separation (LLPS) to produce coacervates with applications in bioimaging, drug delivery, and theranostics. However, the structure–function relationship of the peptide building blocks remains unclear. Here, we used an aggregation-induced emission reporter to study how different β-sheet promoters impact coacervation. We synthesized an anionic Asp-peptide (D10) and a cationic Arg-peptide (R10) covalently conjugated to tetraphenylethene pyridinium (PyTPE)—an aggregation-induced emission generator (AIEgen). We included several spacer units composed of β-sheet-promoting self-assembling peptides (F2G2, W2G2, FFVLK, and GFFYK) between the AIEgen and R10 and investigated their size and AIE intensities after coacervation. The properties of the coacervates vary with endogenous factors (peptide sequence, number of Arg and Asp residues, charge ratio, and total charge equivalent concentration of peptides), exogenous factors (pH, ionic strength, salts), and the β-sheet content of the constituting peptide. We observed that a minimum 10 mM phosphate buffer salt concentration, pH 4–12, total charge equivalent concentration of 0.8 mM, and charge ratio (R10/D10) of 0.5 are required for 100% peptide complexation. Peptides containing the FFVLK sequence exhibited the highest AIE (~450-fold) with the capability to form self-coacervates in phosphate buffer. The W2G2 motif had negligible activation. Finally, we confirmed that the coacervates retain their shape after intracellularly labeling murine colon adenocarcinoma cells (MC38) via caveolae-mediated endocytosis with >95% cell viability.
- 27 February 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (19) , e2307679
Peptide‐Driven Proton Sponge Nano‐Assembly for Imaging and Triggering Lysosome‐Regulated Immunogenic Cancer Cell Death
Triggering lysosome‐regulated immunogenic cell death (ICD, e.g., pyroptosis and necroptosis) with nanomedicines is an emerging approach for turning an “immune‐cold” tumor “hot”—a key challenge faced by cancer immunotherapies. Proton sponge such as high‐molecular‐weight branched polyethylenimine (PEI) is excellent at rupturing lysosomes, but its therapeutic application is hindered by uncontrollable toxicity due to fixed charge density and poor understanding of resulted cell death mechanism. Here, a series of proton sponge nano‐assemblies (PSNAs) with self‐assembly controllable surface charge density and cell cytotoxicity are created. Such PSNAs are constructed via low‐molecular‐weight branched PEI covalently bound to self‐assembling peptides carrying tetraphenylethene pyridinium (PyTPE, an aggregation‐induced emission‐based luminogen). Assembly of PEI assisted by the self‐assembling peptide‐PyTPE leads to enhanced surface positive charges and cell cytotoxicity of PSNA. The self‐assembly tendency of PSNAs is further optimized by tuning hydrophilic and hydrophobic components within the peptide, thus resulting in the PSNA with the highest fluorescence, positive surface charge density, cell uptake, and cancer cell cytotoxicity. Systematic cell death mechanistic studies reveal that the lysosome rupturing‐regulated pyroptosis and necroptosis are at least two causes of cell death. Tumor cells undergoing PSNA‐triggered ICD activate immune cells, suggesting the great potential of PSNAs to trigger anticancer immunity.
- 27 February 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (19) , e2307679
Peptide‐Driven Proton Sponge Nano‐Assembly for Imaging and Triggering Lysosome‐Regulated Immunogenic Cancer Cell Death
Triggering lysosome‐regulated immunogenic cell death (ICD, e.g., pyroptosis and necroptosis) with nanomedicines is an emerging approach for turning an “immune‐cold” tumor “hot”—a key challenge faced by cancer immunotherapies. Proton sponge such as high‐molecular‐weight branched polyethylenimine (PEI) is excellent at rupturing lysosomes, but its therapeutic application is hindered by uncontrollable toxicity due to fixed charge density and poor understanding of resulted cell death mechanism. Here, a series of proton sponge nano‐assemblies (PSNAs) with self‐assembly controllable surface charge density and cell cytotoxicity are created. Such PSNAs are constructed via low‐molecular‐weight branched PEI covalently bound to self‐assembling peptides carrying tetraphenylethene pyridinium (PyTPE, an aggregation‐induced emission‐based luminogen). Assembly of PEI assisted by the self‐assembling peptide‐PyTPE leads to enhanced surface positive charges and cell cytotoxicity of PSNA. The self‐assembly tendency of PSNAs is further optimized by tuning hydrophilic and hydrophobic components within the peptide, thus resulting in the PSNA with the highest fluorescence, positive surface charge density, cell uptake, and cancer cell cytotoxicity. Systematic cell death mechanistic studies reveal that the lysosome rupturing‐regulated pyroptosis and necroptosis are at least two causes of cell death. Tumor cells undergoing PSNA‐triggered ICD activate immune cells, suggesting the great potential of PSNAs to trigger anticancer immunity.
- 3 November 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (47) , 25664-25672
Self-Assembled Homopolymeric Spherulites from Small Molecules in Solution
Polymeric spherulites are typically formed by melt crystallization: spherulitic growth in solution is rare and requires complex polymers and dilute solutions. Here, we report the mild and unique formation of luminescent spherulites at room temperature via the simple molecule benzene-1,4-dithiol (BDT). Specifically, BDT polymerized into oligomers (PBDT) via disulfide bonds and assembled into uniform supramolecular nanoparticles in aqueous buffer; these nanoparticles were then dissolved back into PBDT in a good solvent (i.e., dimethylformamide) and underwent chain elongation to form spherulites (rPBDT) in 10 min. The spherulite geometry was modulated by changing the PBDT concentration and reaction time. Due to the step-growth polymerization and reorganization of PBDT, these spherulites not only exhibited robust structure but also showed broad clusterization-triggered emission. The biocompatibility and efficient cellular uptake of the spherulites further underscore their value as traceable drug carriers. This system provides a new pathway for designing versatile superstructures with value for hierarchical assembly of small molecules into a complicated biological system.
- 3 November 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (47) , 25664-25672
Self-Assembled Homopolymeric Spherulites from Small Molecules in Solution
Polymeric spherulites are typically formed by melt crystallization: spherulitic growth in solution is rare and requires complex polymers and dilute solutions. Here, we report the mild and unique formation of luminescent spherulites at room temperature via the simple molecule benzene-1,4-dithiol (BDT). Specifically, BDT polymerized into oligomers (PBDT) via disulfide bonds and assembled into uniform supramolecular nanoparticles in aqueous buffer; these nanoparticles were then dissolved back into PBDT in a good solvent (i.e., dimethylformamide) and underwent chain elongation to form spherulites (rPBDT) in 10 min. The spherulite geometry was modulated by changing the PBDT concentration and reaction time. Due to the step-growth polymerization and reorganization of PBDT, these spherulites not only exhibited robust structure but also showed broad clusterization-triggered emission. The biocompatibility and efficient cellular uptake of the spherulites further underscore their value as traceable drug carriers. This system provides a new pathway for designing versatile superstructures with value for hierarchical assembly of small molecules into a complicated biological system.
- 14 August 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (17) , 16980-16992
Endoproteolysis of Oligopeptide-Based Coacervates for Enzymatic Modeling
Better insights into the fate of membraneless organelles could strengthen the understanding of the transition from prebiotic components to multicellular organisms. Compartmentalized enzyme reactions in a synthetic coacervate have been investigated, yet there remains a gap in understanding the enzyme interactions with coacervate as a substrate hub. Here, we study how the molecularly crowded nature of the coacervate affects the interactions of the embedded substrate with a protease. We design oligopeptide-based coacervates that comprise an anionic Asp-peptide (D10) and a cationic Arg-peptide (R5R5) with a proteolytic cleavage site. The coacervates dissolve in the presence of the main protease (Mpro) implicated in the coronavirus lifecycle. We capitalize on the condensed structure, introduce a self-quenching mechanism, and model the enzyme kinetics by using Cy5.5-labeled peptides. The determined specificity constant (kcat/KM) is 5817 M-1 s-1 and is similar to that of the free substrate. We further show that the enzyme kinetics depend on the type and quantity of dye incorporated into the coacervates. Our work presents a simple design for enzyme-responsive coacervates and provides insights into the interactions between the enzyme and coacervates as a whole.
- 14 August 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (17) , 16980-16992
Endoproteolysis of Oligopeptide-Based Coacervates for Enzymatic Modeling
Better insights into the fate of membraneless organelles could strengthen the understanding of the transition from prebiotic components to multicellular organisms. Compartmentalized enzyme reactions in a synthetic coacervate have been investigated, yet there remains a gap in understanding the enzyme interactions with coacervate as a substrate hub. Here, we study how the molecularly crowded nature of the coacervate affects the interactions of the embedded substrate with a protease. We design oligopeptide-based coacervates that comprise an anionic Asp-peptide (D10) and a cationic Arg-peptide (R5R5) with a proteolytic cleavage site. The coacervates dissolve in the presence of the main protease (Mpro) implicated in the coronavirus lifecycle. We capitalize on the condensed structure, introduce a self-quenching mechanism, and model the enzyme kinetics by using Cy5.5-labeled peptides. The determined specificity constant (kcat/KM) is 5817 M-1 s-1 and is similar to that of the free substrate. We further show that the enzyme kinetics depend on the type and quantity of dye incorporated into the coacervates. Our work presents a simple design for enzyme-responsive coacervates and provides insights into the interactions between the enzyme and coacervates as a whole.
- 8 February 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (7) , 3789-3798
Protease-Responsive Potential-Tunable AIEgens for Cell Selective Imaging of TMPRSS2 and Accurate Inhibitor Screening
Transmembrane protease serine 2 (TMPRSS2) is a plasma membrane protease that activates both spike protein of coronaviruses for cell entry and oncogenic signaling pathways for tumor progression. TMPRSS2 inhibition can reduce cancer invasion and metastasis and partially prevent the entry of SARS-CoV-2 into host cells. Thus, there is an urgent need for both TMPRSS2-selective imaging and precise screening of TMPRSS2 inhibitors. Here, we report a TMPRSS2-responsive surface-potential-tunable peptide-conjugated probe (EGTP) with aggregation-induced emission (AIE) features for TMPRSS2 selective imaging and accurate inhibitor screening. The amphiphilic EGTP was constructed with tunable surface potential and responsive efficiency with TMPRSS2 and its inhibitor. The rational construction of AIE luminogens (AIEgens) with modular peptides indicated that the cleavage of EGTP led to a gradual aggregation with bright fluorescence in high TMPRSS2-expressing cells. This strategy may have value for selective detection of cancer cells, SARS-CoV-2-target cells, and screening of protease inhibitors.
- 8 February 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (7) , 3789-3798
Protease-Responsive Potential-Tunable AIEgens for Cell Selective Imaging of TMPRSS2 and Accurate Inhibitor Screening
Transmembrane protease serine 2 (TMPRSS2) is a plasma membrane protease that activates both spike protein of coronaviruses for cell entry and oncogenic signaling pathways for tumor progression. TMPRSS2 inhibition can reduce cancer invasion and metastasis and partially prevent the entry of SARS-CoV-2 into host cells. Thus, there is an urgent need for both TMPRSS2-selective imaging and precise screening of TMPRSS2 inhibitors. Here, we report a TMPRSS2-responsive surface-potential-tunable peptide-conjugated probe (EGTP) with aggregation-induced emission (AIE) features for TMPRSS2 selective imaging and accurate inhibitor screening. The amphiphilic EGTP was constructed with tunable surface potential and responsive efficiency with TMPRSS2 and its inhibitor. The rational construction of AIE luminogens (AIEgens) with modular peptides indicated that the cleavage of EGTP led to a gradual aggregation with bright fluorescence in high TMPRSS2-expressing cells. This strategy may have value for selective detection of cancer cells, SARS-CoV-2-target cells, and screening of protease inhibitors.
- Open Access
- 7 February 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (10) , 2659-2668
Peptide valence-induced breaks in plasmonic coupling
Electrostatic interactions are a key driving force that mediates colloidal assembly. The Schulze-Hardy rule describes that counterions of high charge valence are easier for nanoparticle coagulation; this relationship has been extensively examined in systems of colloids and simple ions. However, it is unclear how the Schulze-Hardy rule scales when the simple electrolytes are replaced with more sophisticated charge carriers. Here, we designed cationic peptides of varying valency and demonstrate that their charge screening behaviors on anionic gold nanoparticles (AuNPs) follows the six-power relationship in the Schulze-Hardy rule. This finding further inspires a simple yet effective strategy for measuring SARS-CoV-2 main protease (Mpro) via naked eyes. This work provides a unique avenue for fundamental NP disassembly based on the Schulze-Hardy rule and can help design versatile substrates for colorimetric sensing of other proteases.
- 7 February 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (10) , 2659-2668
Open AccessPeptide valence-induced breaks in plasmonic coupling
Electrostatic interactions are a key driving force that mediates colloidal assembly. The Schulze-Hardy rule describes that counterions of high charge valence are easier for nanoparticle coagulation; this relationship has been extensively examined in systems of colloids and simple ions. However, it is unclear how the Schulze-Hardy rule scales when the simple electrolytes are replaced with more sophisticated charge carriers. Here, we designed cationic peptides of varying valency and demonstrate that their charge screening behaviors on anionic gold nanoparticles (AuNPs) follows the six-power relationship in the Schulze-Hardy rule. This finding further inspires a simple yet effective strategy for measuring SARS-CoV-2 main protease (Mpro) via naked eyes. This work provides a unique avenue for fundamental NP disassembly based on the Schulze-Hardy rule and can help design versatile substrates for colorimetric sensing of other proteases.
- 15 December 2022
- Published by Wiley in Angewandte Chemie
- Vol. 135 (4)
Peptide Amphiphile Mediated Co‐assembly for Nanoplasmonic Sensing
Aromatic interactions are commonly involved in the assembly of naturally occurring building blocks, and these interactions can be replicated in an artificial setting to produce functional materials. Here we describe a colorimetric biosensor using co‐assembly experiments with plasmonic gold and surfactant‐like peptides (SLPs) spanning a wide range of aromatic residues, polar stretches, and interfacial affinities. The SLPs programmed in DDD−(ZZ)x−FFPC self‐assemble into higher‐order structures in response to a protease and subsequently modulate the colloidal dispersity of gold leading to a colorimetric readout. Results show the strong aggregation propensity of the FFPC tail without polar DDD head. The SLPs were specific to the target protease, i.e., Mpro, a biomarker for SARS‐CoV‐2. This system is a simple and visual tool that senses Mproin phosphate buffer, exhaled breath condensate, and saliva with detection limits of 15.7, 20.8, and 26.1 nM, respectively. These results may have value in designing other protease testing methods.
- 15 December 2022
- Published by Wiley in Angewandte Chemie
- Vol. 135 (4)
Peptide Amphiphile Mediated Co‐assembly for Nanoplasmonic Sensing
Aromatic interactions are commonly involved in the assembly of naturally occurring building blocks, and these interactions can be replicated in an artificial setting to produce functional materials. Here we describe a colorimetric biosensor using co‐assembly experiments with plasmonic gold and surfactant‐like peptides (SLPs) spanning a wide range of aromatic residues, polar stretches, and interfacial affinities. The SLPs programmed in DDD−(ZZ)x−FFPC self‐assemble into higher‐order structures in response to a protease and subsequently modulate the colloidal dispersity of gold leading to a colorimetric readout. Results show the strong aggregation propensity of the FFPC tail without polar DDD head. The SLPs were specific to the target protease, i.e., Mpro, a biomarker for SARS‐CoV‐2. This system is a simple and visual tool that senses Mproin phosphate buffer, exhaled breath condensate, and saliva with detection limits of 15.7, 20.8, and 26.1 nM, respectively. These results may have value in designing other protease testing methods.
- 15 December 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (4) , e202214394
Peptide Amphiphile Mediated Co‐assembly for Nanoplasmonic Sensing
Aromatic interactions are commonly involved in the assembly of naturally occurring building blocks, and these interactions can be replicated in an artificial setting to produce functional materials. Here we describe a colorimetric biosensor using co‐assembly experiments with plasmonic gold and surfactant‐like peptides (SLPs) spanning a wide range of aromatic residues, polar stretches, and interfacial affinities. The SLPs programmed in DDD−(ZZ)x−FFPC self‐assemble into higher‐order structures in response to a protease and subsequently modulate the colloidal dispersity of gold leading to a colorimetric readout. Results show the strong aggregation propensity of the FFPC tail without polar DDD head. The SLPs were specific to the target protease, i.e., Mpro, a biomarker for SARS‐CoV‐2. This system is a simple and visual tool that senses Mproin phosphate buffer, exhaled breath condensate, and saliva with detection limits of 15.7, 20.8, and 26.1 nM, respectively. These results may have value in designing other protease testing methods.
- 15 December 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (4) , e202214394
Peptide Amphiphile Mediated Co‐assembly for Nanoplasmonic Sensing
Aromatic interactions are commonly involved in the assembly of naturally occurring building blocks, and these interactions can be replicated in an artificial setting to produce functional materials. Here we describe a colorimetric biosensor using co‐assembly experiments with plasmonic gold and surfactant‐like peptides (SLPs) spanning a wide range of aromatic residues, polar stretches, and interfacial affinities. The SLPs programmed in DDD−(ZZ)x−FFPC self‐assemble into higher‐order structures in response to a protease and subsequently modulate the colloidal dispersity of gold leading to a colorimetric readout. Results show the strong aggregation propensity of the FFPC tail without polar DDD head. The SLPs were specific to the target protease, i.e., Mpro, a biomarker for SARS‐CoV‐2. This system is a simple and visual tool that senses Mproin phosphate buffer, exhaled breath condensate, and saliva with detection limits of 15.7, 20.8, and 26.1 nM, respectively. These results may have value in designing other protease testing methods.
- 8 November 2022
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 22 (22) , 8932-8940
Spacer Matters: All-Peptide-Based Ligand for Promoting Interfacial Proteolysis and Plasmonic Coupling
Plasmonic coupling via nanoparticle assembly is a popular signal-generation method in bioanalytical sensors. Here, we customized an all-peptide-based ligand that carries an anchoring group, polyproline spacer, biomolecular recognition, and zwitterionic domains for functionalizing gold nanoparticles (AuNPs) as a colorimetric enzyme sensor. Our results underscore the importance of the polyproline module, which enables the SARS-CoV-2 main protease (Mpro) to recognize the peptidic ligand on nanosurfaces for subsequent plasmonic coupling via Coulombic interactions. AuNP aggregation is favored by the lowered surface potential due to enzymatic unveiling of the zwitterionic module. Therefore, this system provides a naked-eye measure for Mpro. No proteolysis occurs on AuNPs modified with a control ligand lacking a spacer domain. Overall, this all-peptide-based ligand does not require complex molecular conjugations and hence offers a simple and promising route for plasmonic sensing other proteases.
- 8 November 2022
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 22 (22) , 8932-8940
Spacer Matters: All-Peptide-Based Ligand for Promoting Interfacial Proteolysis and Plasmonic Coupling
Plasmonic coupling via nanoparticle assembly is a popular signal-generation method in bioanalytical sensors. Here, we customized an all-peptide-based ligand that carries an anchoring group, polyproline spacer, biomolecular recognition, and zwitterionic domains for functionalizing gold nanoparticles (AuNPs) as a colorimetric enzyme sensor. Our results underscore the importance of the polyproline module, which enables the SARS-CoV-2 main protease (Mpro) to recognize the peptidic ligand on nanosurfaces for subsequent plasmonic coupling via Coulombic interactions. AuNP aggregation is favored by the lowered surface potential due to enzymatic unveiling of the zwitterionic module. Therefore, this system provides a naked-eye measure for Mpro. No proteolysis occurs on AuNPs modified with a control ligand lacking a spacer domain. Overall, this all-peptide-based ligand does not require complex molecular conjugations and hence offers a simple and promising route for plasmonic sensing other proteases.