Matteo Fretto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Matteo Fretto has a total of 160 co-authors. Here are the top co-authors by number of shared publications:
- Natascia De Leo
Istituto Nazionale di Ricerca Metrologica
40 shared publications V. Lacquaniti
Istituto Nazionale di Ricerca Metrologica
15 shared publicationsVincenzo Lacquaniti
Istituto Nazionale di Ricerca Metrologica, National Institute for Metrological Research, Torino, Italy
13 shared publicationsA. Sosso
National Institute for Metrological Research, 10135 Torino, Italy
12 shared publications- Antonio Vettoliere
Institute of Applied Sciences and Intelligent Systems, National Research Council, 80078 Pozzuoli, Italy
12 shared publications - Carmine Granata
Institute of Applied Sciences and Intelligent Systems of National Research Council, Pozzuoli, Italy
12 shared publications
Latest Publications
- Open Access
- 30 October 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (43) , 435105
Quantitative analysis of current–voltage–temperature characteristics of metal-oxide nanowires
Electrical transport in single nanowire (NW) devices arises from the interplay between intrinsic conduction properties of the NW and the transport characteristics of metal-semiconductor contact interfaces. Here, we present a framework for the quantitative analysis of current–voltage–temperature ( I–V–T ) characteristics of metal-oxide NWs. By analyzing experimental data obtained from a nanodevice based on a single CuO NW contacted by metal electrodes, we show that single-NW devices can be described using a metal–semiconductor–metal (M–S–M) transport model that accounts for thermionic emission and thermionic-field emission at Schottky metal-semiconductor interfaces. Through numerical implementation, we show that the M–S–M model distinguishes the electrical transport contributions of the NW from those of the two metal-semiconductor interfaces, enabling the extraction of the temperature-dependent NW resistance and activation energy. The effective interface parameters further provide qualitative insight into the non-ideal contact transport. Comparison with the commonly used large-bias approximation allows us to assess the validity and limitations of this simplified extraction method, while providing an independent cross-check of the quality of the M–S–M transport model. Overall, the proposed approach provides a general framework for disentangling intrinsic NW conduction from contact effects in temperature-dependent two-terminal measurements of single-NW semiconductor devices.
- 30 October 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (43) , 435105
Open AccessQuantitative analysis of current–voltage–temperature characteristics of metal-oxide nanowires
Electrical transport in single nanowire (NW) devices arises from the interplay between intrinsic conduction properties of the NW and the transport characteristics of metal-semiconductor contact interfaces. Here, we present a framework for the quantitative analysis of current–voltage–temperature ( I–V–T ) characteristics of metal-oxide NWs. By analyzing experimental data obtained from a nanodevice based on a single CuO NW contacted by metal electrodes, we show that single-NW devices can be described using a metal–semiconductor–metal (M–S–M) transport model that accounts for thermionic emission and thermionic-field emission at Schottky metal-semiconductor interfaces. Through numerical implementation, we show that the M–S–M model distinguishes the electrical transport contributions of the NW from those of the two metal-semiconductor interfaces, enabling the extraction of the temperature-dependent NW resistance and activation energy. The effective interface parameters further provide qualitative insight into the non-ideal contact transport. Comparison with the commonly used large-bias approximation allows us to assess the validity and limitations of this simplified extraction method, while providing an independent cross-check of the quality of the M–S–M transport model. Overall, the proposed approach provides a general framework for disentangling intrinsic NW conduction from contact effects in temperature-dependent two-terminal measurements of single-NW semiconductor devices.
- Open Access
- 17 April 2026
- Published by Elsevier in Superconductivity
- Vol. 18
Berezinskii-Kosterlitz-Thouless to BCS-like superconducting fluctuation crossover driven by weak magnetic fields in ultra-thin NbN films
- 17 April 2026
- Published by Elsevier in Superconductivity
- Vol. 18
Open AccessBerezinskii-Kosterlitz-Thouless to BCS-like superconducting fluctuation crossover driven by weak magnetic fields in ultra-thin NbN films
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Geometry Dependent Superconductive Transition of Nb Nanostructures
Recently, superconducting nanostructures gained particular attention due to the visualisation of some intriguing phenomena, such as phase fluctuations, quantum phase slip, shape resonance in critical temperature, allowing the definition of a tailored superconducting nanodevice with the desired superconducting features, quantum phenomena. A deep investigation into the relationship between superconductivity, low dimensionality, quantum phenomena should be performed, in order to explain the emergence mechanism of these effects in nanostructures, how superconductivity is affected. In the following, we report on the investigation of the superconductive transition in triangular-shaped Nb pads connecting a Nb nanostripe. As revealed by R vs T curves, and the superconductive transition is observed to be characterised by two regions: i) a first smooth and wide transition reflecting the continuous reduction in the width of the Nb triangular pads that progressively experience superconductive transition, and ii) a more abrupt transition reflecting the transition of the Nb nanostripe. This work could pave the way concerning the realisation of Nb nanostructures with tunable critical temperature, transition width, and slope.
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Geometry Dependent Superconductive Transition of Nb Nanostructures
Recently, superconducting nanostructures gained particular attention due to the visualisation of some intriguing phenomena, such as phase fluctuations, quantum phase slip, shape resonance in critical temperature, allowing the definition of a tailored superconducting nanodevice with the desired superconducting features, quantum phenomena. A deep investigation into the relationship between superconductivity, low dimensionality, quantum phenomena should be performed, in order to explain the emergence mechanism of these effects in nanostructures, how superconductivity is affected. In the following, we report on the investigation of the superconductive transition in triangular-shaped Nb pads connecting a Nb nanostripe. As revealed by R vs T curves, and the superconductive transition is observed to be characterised by two regions: i) a first smooth and wide transition reflecting the continuous reduction in the width of the Nb triangular pads that progressively experience superconductive transition, and ii) a more abrupt transition reflecting the transition of the Nb nanostripe. This work could pave the way concerning the realisation of Nb nanostructures with tunable critical temperature, transition width, and slope.
- Open Access
- 26 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1872-1878
Quantum Conductance and Temperature Effects in Titanium Oxide-Based Memristive Devices
A thorough investigation of quantum conductance properties and the effects of temperature on $\text{Cr/Au/TiO}_{\text{2}}/\text{TiO}_{\textit{x}}\text{/Cr/Au}$ memristive devices is presented. Besides fabrication and resistive switching characteristics, two different programming strategies have been explored to observe quantum conductance effects. The first strategy was based on device stimulation with slow current sweeps to observe quantum levels in the SET region, while the second aimed to achieve quantum steps during RESET using slow sweep stimulation. The effects of the two different programming strategies are compared. It is also shown that these devices can be programed to achieve stable quantum levels, as revealed by retention measurements performed after programming the device to 1 $\textit{G}_\text{0}$ . Furthermore, the temperature-dependent electronic conduction mechanism of the device after being programed to different internal resistance states has been analyzed, revealing a semiconductor behavior with an increase in resistance by lowering the temperature in either a pristine state, low-resistance state, or resistance states close to the quantum conduction regime.
- 26 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1872-1878
Open AccessQuantum Conductance and Temperature Effects in Titanium Oxide-Based Memristive Devices
A thorough investigation of quantum conductance properties and the effects of temperature on $\text{Cr/Au/TiO}_{\text{2}}/\text{TiO}_{\textit{x}}\text{/Cr/Au}$ memristive devices is presented. Besides fabrication and resistive switching characteristics, two different programming strategies have been explored to observe quantum conductance effects. The first strategy was based on device stimulation with slow current sweeps to observe quantum levels in the SET region, while the second aimed to achieve quantum steps during RESET using slow sweep stimulation. The effects of the two different programming strategies are compared. It is also shown that these devices can be programed to achieve stable quantum levels, as revealed by retention measurements performed after programming the device to 1 $\textit{G}_\text{0}$ . Furthermore, the temperature-dependent electronic conduction mechanism of the device after being programed to different internal resistance states has been analyzed, revealing a semiconductor behavior with an increase in resistance by lowering the temperature in either a pristine state, low-resistance state, or resistance states close to the quantum conduction regime.
- Open Access
- 22 November 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (23) , 4109
Complex Phase-Fluctuation Effects Correlated with Granularity in Superconducting NbN Nanofilms
Superconducting nanofilms are tunable systems that can host a 3D–2D dimensional crossover leading to the Berezinskii–Kosterlitz–Thouless (BKT) superconducting transition approaching the 2D regime. Reducing the dimensionality further, from 2D to quasi-1D superconducting nanostructures with disorder, can generate quantum and thermal phase slips (PS) of the order parameter. Both BKT and PS are complex phase-fluctuation phenomena of difficult experiments. We characterized superconducting NbN nanofilms thinner than 15 nm, on different substrates, by temperature-dependent resistivity and current–voltage (I-V) characteristics. Our measurements evidence clear features related to the emergence of BKT transition and PS events. The contemporary observation in the same system of BKT transition and PS events, and their tunable evolution in temperature and thickness was explained as due to the nano-conducting paths forming in a granular NbN system. In one of the investigated samples, we were able to trace and characterize the continuous evolution in temperature from quantum to thermal PS. Our analysis established that the detected complex phase phenomena are strongly related to the interplay between the typical size of the nano-conductive paths and the superconducting coherence length.
- 22 November 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (23) , 4109
Open AccessComplex Phase-Fluctuation Effects Correlated with Granularity in Superconducting NbN Nanofilms
Superconducting nanofilms are tunable systems that can host a 3D–2D dimensional crossover leading to the Berezinskii–Kosterlitz–Thouless (BKT) superconducting transition approaching the 2D regime. Reducing the dimensionality further, from 2D to quasi-1D superconducting nanostructures with disorder, can generate quantum and thermal phase slips (PS) of the order parameter. Both BKT and PS are complex phase-fluctuation phenomena of difficult experiments. We characterized superconducting NbN nanofilms thinner than 15 nm, on different substrates, by temperature-dependent resistivity and current–voltage (I-V) characteristics. Our measurements evidence clear features related to the emergence of BKT transition and PS events. The contemporary observation in the same system of BKT transition and PS events, and their tunable evolution in temperature and thickness was explained as due to the nano-conducting paths forming in a granular NbN system. In one of the investigated samples, we were able to trace and characterize the continuous evolution in temperature from quantum to thermal PS. Our analysis established that the detected complex phase phenomena are strongly related to the interplay between the typical size of the nano-conductive paths and the superconducting coherence length.
- Open Access
Complex phase-fluctuation effects correlated with granularity in superconducting NbN nanofilms
Superconducting nanofilms are tunable systems that can host a 3D-2D dimensional crossover, leading to the Berezinskii-Kosterlitz-Thouless (BKT) superconducting transition approaching the 2D regime. Reducing further the dimensionality, from 2D to quasi-1D, superconducting nanostructures with disorder can generate quantum and thermal phase slips (PS) of the order parameter. Both BKT and PS are complex phase fluctuation phenomena of difficult experimental detection. Here, we have characterized superconducting NbN nanofilms thinner than 15 nm, on different substrates, by temperature dependent resistivity and current-voltage (I-V) characteristics. Our measurements have evidenced clear features related to the emergence of BKT transition and PS events. The contemporary observation in the same system of BKT transition and PS events and their tunable evolution in temperature and thickness, has been explained as due to the nano-conducting paths forming in a granular NbN system. In one of the investigated samples we have been able to trace and characterize the continuous evolution in temperature from quantum to thermal PS. Our analysis has established that the detected complex phase phenomena are strongly related to the interplay between the typical size of the nano-conductive paths and the superconducting coherence length.
Open AccessComplex phase-fluctuation effects correlated with granularity in superconducting NbN nanofilms
Superconducting nanofilms are tunable systems that can host a 3D-2D dimensional crossover, leading to the Berezinskii-Kosterlitz-Thouless (BKT) superconducting transition approaching the 2D regime. Reducing further the dimensionality, from 2D to quasi-1D, superconducting nanostructures with disorder can generate quantum and thermal phase slips (PS) of the order parameter. Both BKT and PS are complex phase fluctuation phenomena of difficult experimental detection. Here, we have characterized superconducting NbN nanofilms thinner than 15 nm, on different substrates, by temperature dependent resistivity and current-voltage (I-V) characteristics. Our measurements have evidenced clear features related to the emergence of BKT transition and PS events. The contemporary observation in the same system of BKT transition and PS events and their tunable evolution in temperature and thickness, has been explained as due to the nano-conducting paths forming in a granular NbN system. In one of the investigated samples we have been able to trace and characterize the continuous evolution in temperature from quantum to thermal PS. Our analysis has established that the detected complex phase phenomena are strongly related to the interplay between the typical size of the nano-conductive paths and the superconducting coherence length.
- 14 August 2020
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 53 (5) , 1195-1202
X-ray phase-contrast topography to measure the surface stress and bulk strain in a silicon crystal
The measurement of the Si lattice parameter by X-ray interferometry assumes the use of strain-free crystals, which might not be true because of intrinsic stresses due to surface relaxation, reconstruction and oxidation. X-ray phase-contrast topography was used to investigate the strain sensitivity to the finishing, annealing and coating of interferometer crystals. The topography capabilities were assessed by measuring the lattice strain due to films of copper deposited on the interferometer mirror crystal. A by-product has been the measurement of the surface stresses after complete relaxation of the coatings.
- 14 August 2020
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 53 (5) , 1195-1202
X-ray phase-contrast topography to measure the surface stress and bulk strain in a silicon crystal
The measurement of the Si lattice parameter by X-ray interferometry assumes the use of strain-free crystals, which might not be true because of intrinsic stresses due to surface relaxation, reconstruction and oxidation. X-ray phase-contrast topography was used to investigate the strain sensitivity to the finishing, annealing and coating of interferometer crystals. The topography capabilities were assessed by measuring the lattice strain due to films of copper deposited on the interferometer mirror crystal. A by-product has been the measurement of the surface stresses after complete relaxation of the coatings.
- Open Access
- 1 May 2020
- Published by MDPI AG in Condensed Matter
- Vol. 5 (2) , 33
Proximity Array Device: A Novel Photon Detector Working in Long Wavelengths
We present here an innovative photon detector based on the proximity junction array device (PAD) working at long wavelengths. We show that the vortex dynamics in PAD undergoes a transition from a Mott insulator to a vortex metal state by application of an external magnetic field. The PAD also evidences a Josephson I-V characteristic with the external field dependent tunneling current. At high applied currents, we observe a dissipative regime in which the vortex dynamics is dominated by the quasi-particle contribution from the normal metal. The PAD has a relatively high photo-response even at frequencies below the expected characteristic frequency while, its superconducting properties such as the order parameter and the Josephson characteristic frequency can be modulated via external fields to widen the detection band. This device represents a promising and reliable candidate for new high-sensitivity long-wavelength detectors.
- 1 May 2020
- Published by MDPI AG in Condensed Matter
- Vol. 5 (2) , 33
Open AccessProximity Array Device: A Novel Photon Detector Working in Long Wavelengths
We present here an innovative photon detector based on the proximity junction array device (PAD) working at long wavelengths. We show that the vortex dynamics in PAD undergoes a transition from a Mott insulator to a vortex metal state by application of an external magnetic field. The PAD also evidences a Josephson I-V characteristic with the external field dependent tunneling current. At high applied currents, we observe a dissipative regime in which the vortex dynamics is dominated by the quasi-particle contribution from the normal metal. The PAD has a relatively high photo-response even at frequencies below the expected characteristic frequency while, its superconducting properties such as the order parameter and the Josephson characteristic frequency can be modulated via external fields to widen the detection band. This device represents a promising and reliable candidate for new high-sensitivity long-wavelength detectors.
- Open Access
- 7 February 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (2) , 280
Directed Self-Assembly of Polystyrene Nanospheres by Direct Laser-Writing Lithography
In this work, we performed a systematic study on the effect of the geometry of pre-patterned templates and spin-coating conditions on the self-assembling process of colloidal nanospheres. To achieve this goal, large-scale templates, with different size and shape, were generated by direct laser-writer lithography over square millimetre areas. When deposited over patterned templates, the ordering dynamics of the self-assembled nanospheres exhibits an inverse trend with respect to that observed for the maximisation of the correlation length on a flat surface. Furthermore, the self-assembly process was found to be strongly dependent on the height (H) of the template sidewalls. In particular, we observed that, when H is 0.6 times the nanospheres diameter and spinning speed 2500 rpm, the formation of a confined and well ordered monolayer is promoted. To unveil the defects generation inside the templates, a systematic assessment of the directed self-assembly quality was performed by a novel method based on Delaunay triangulation. As a result of this study, we found that, in the best deposition conditions, the self-assembly process leads to well-ordered monolayer that extended for tens of micrometres within the linear templates, where 96.2% of them is aligned with the template sidewalls.- 7 February 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (2) , 280
Open AccessDirected Self-Assembly of Polystyrene Nanospheres by Direct Laser-Writing Lithography
In this work, we performed a systematic study on the effect of the geometry of pre-patterned templates and spin-coating conditions on the self-assembling process of colloidal nanospheres. To achieve this goal, large-scale templates, with different size and shape, were generated by direct laser-writer lithography over square millimetre areas. When deposited over patterned templates, the ordering dynamics of the self-assembled nanospheres exhibits an inverse trend with respect to that observed for the maximisation of the correlation length on a flat surface. Furthermore, the self-assembly process was found to be strongly dependent on the height (H) of the template sidewalls. In particular, we observed that, when H is 0.6 times the nanospheres diameter and spinning speed 2500 rpm, the formation of a confined and well ordered monolayer is promoted. To unveil the defects generation inside the templates, a systematic assessment of the directed self-assembly quality was performed by a novel method based on Delaunay triangulation. As a result of this study, we found that, in the best deposition conditions, the self-assembly process leads to well-ordered monolayer that extended for tens of micrometres within the linear templates, where 96.2% of them is aligned with the template sidewalls. - Open Access
- 20 November 2018
- Published by MDPI AG in Preprints.org
Substrate induced proximity effect in superconducting niobium nanofilms
Tructural and superconducting properties of high quality Niobium nanofilms with different thicknesses are investigated on silicon oxide and sapphire substrates. The role played by the different substrates and the superconducting properties of the Nb films are discussed based on the defectivity of the films and on the presence of an interfacial oxide layer between the Nb film and the substrate. The X-ray absorption spectroscopy is employed to uncover the structure of the interfacial layer. We show that this interfacial layer leads to a strong proximity effect, specially in films deposited on a SiO2 substrate, altering the superconducting properties of the Nb films. Our results establish that the critical temperature is determined by an interplay between quantum-size effects, due to the reduction of the Nb film thicknesses, and proximity effects.
- 20 November 2018
- Published by MDPI AG in Preprints.org
Open AccessSubstrate induced proximity effect in superconducting niobium nanofilms
Tructural and superconducting properties of high quality Niobium nanofilms with different thicknesses are investigated on silicon oxide and sapphire substrates. The role played by the different substrates and the superconducting properties of the Nb films are discussed based on the defectivity of the films and on the presence of an interfacial oxide layer between the Nb film and the substrate. The X-ray absorption spectroscopy is employed to uncover the structure of the interfacial layer. We show that this interfacial layer leads to a strong proximity effect, specially in films deposited on a SiO2 substrate, altering the superconducting properties of the Nb films. Our results establish that the critical temperature is determined by an interplay between quantum-size effects, due to the reduction of the Nb film thicknesses, and proximity effects.