Renjia Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Renjia Guo has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
Yuechun Shi
10 shared publicationsXiangfei Chen
9 shared publicationsLianyan Li
Nanjing University, Microwave-Photonics Technology Laboratory, Nanjing National Laboratory of Microstructures and School of Engineering and Applied Sciences, Nanjing 210093, China
8 shared publicationsLinlin Lu
Jiangsu Posts & Telecommunications Planning and Designing Institute Co. Ltd., Nanxijiang East Street, Jiangsu Province, Nanjing 210019, ChinabNanjing University, Microwave-Photonics Technology Laboratory, Nanjing National Laboratory of Microstructures and
6 shared publicationsSimin Li
6 shared publications- Xiangfei Chen
Nanjing University
5 shared publications
Latest Publications
- 4 November 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (32) , 9555-9561
Upraising wavelength exactitude in laser array with spatial hole burning suppression based on the reconstruction-equivalent-chirp technique
An equivalent corrugation pitch modulated distributed-feedback semiconductor multiwavelength laser array (MLA) with two equivalently assisted phase shifts (EAPSs) based on the reconstruction-equivalent-chirp technique is theoretically studied and experimentally demonstrated. The simulated results show that the longitudinal photon density distribution of the studied MLA is much more uniform than that of the MLA without EAPSs. Accordingly, the longitudinal spatial hole burning of the proposed MLA is therefore suppressed more effectively. The experimental results show that the studied MLA has good single-longitudinal-mode performance. The highest side mode suppression ratio (SMSR) is even up to 52.63 dB. Meanwhile, the tunable wavelength range of the investigated MLA is 25.94 nm under the thermal tuning scheme from 15.12°C to 46.93°C. All channels are within a wavelength deviation of ± 0.001 n m . The SMSRs are all above 38 dB.
- 4 November 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (32) , 9555-9561
Upraising wavelength exactitude in laser array with spatial hole burning suppression based on the reconstruction-equivalent-chirp technique
An equivalent corrugation pitch modulated distributed-feedback semiconductor multiwavelength laser array (MLA) with two equivalently assisted phase shifts (EAPSs) based on the reconstruction-equivalent-chirp technique is theoretically studied and experimentally demonstrated. The simulated results show that the longitudinal photon density distribution of the studied MLA is much more uniform than that of the MLA without EAPSs. Accordingly, the longitudinal spatial hole burning of the proposed MLA is therefore suppressed more effectively. The experimental results show that the studied MLA has good single-longitudinal-mode performance. The highest side mode suppression ratio (SMSR) is even up to 52.63 dB. Meanwhile, the tunable wavelength range of the investigated MLA is 25.94 nm under the thermal tuning scheme from 15.12°C to 46.93°C. All channels are within a wavelength deviation of ± 0.001 n m . The SMSRs are all above 38 dB.
- 8 January 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (2) , 470-475
High-precision channel spacing and balanced output multiwavelength laser array with fine tunability
The multiwavelength laser array (MLA) with fine wavelength tunability is demonstrated experimentally. The studied MLA has good single-longitudinal-mode performance, and the side-mode suppression ratio (SMSR) even reaches 62.1 dB. Meanwhile, the wavelength range of the MLA can be tuned to 25.003 nm with 63 channels of 50 GHz spacing. All lasers are within a wavelength deviation of ± 0.02 n m . The output power is almost constant with standard deviation 0.63 dBm. The SMSRs are all above 50 dB.
- 8 January 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (2) , 470-475
High-precision channel spacing and balanced output multiwavelength laser array with fine tunability
The multiwavelength laser array (MLA) with fine wavelength tunability is demonstrated experimentally. The studied MLA has good single-longitudinal-mode performance, and the side-mode suppression ratio (SMSR) even reaches 62.1 dB. Meanwhile, the wavelength range of the MLA can be tuned to 25.003 nm with 63 channels of 50 GHz spacing. All lasers are within a wavelength deviation of ± 0.02 n m . The output power is almost constant with standard deviation 0.63 dBm. The SMSRs are all above 50 dB.
- Open Access
- 15 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (1) , 1-7
The Investigation of the Balanced Output Power of Multi-Section Tunable Laser Based On Reconstruction-Equivalent Chirp Technique
A method to get balanced output power of a current-controlled in-line semiconductor laser based on REC technique is investigated. By mapping the contour lines of the P-I contour diagram of this in-line tunable laser into the wavelength-current contour map, the maximum output power and the tuning curve is obtained. Numerical studies are carried on under linear and quadratic relations, as well as an experiment measurement. Results shows it's a feasible method to find the maximum output power and obtain working currents for the current-controlled in-line semiconductor lasers.
- 15 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (1) , 1-7
Open AccessThe Investigation of the Balanced Output Power of Multi-Section Tunable Laser Based On Reconstruction-Equivalent Chirp Technique
A method to get balanced output power of a current-controlled in-line semiconductor laser based on REC technique is investigated. By mapping the contour lines of the P-I contour diagram of this in-line tunable laser into the wavelength-current contour map, the maximum output power and the tuning curve is obtained. Numerical studies are carried on under linear and quadratic relations, as well as an experiment measurement. Results shows it's a feasible method to find the maximum output power and obtain working currents for the current-controlled in-line semiconductor lasers.
- 15 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 29 (1) , 126-129
Experimental Demonstration of SBG Semiconductor Laser With Controlled Phase Shift
We designed and experimentally demonstrated a sampled Bragg grating (SBG) semiconductor laser with a controllable phase shift. The experimental results indicate that the introduced phase shift can be controlled by tuning injection current. The studied laser has good single longitudinal mode (SLM) performance of which side mode suppression ratio (SMSR) is even up to 61.1 dB. Under the constant total current 150 mA, the lasing wavelength can be continuously tuned about 1.1 nm and the SMSR keeps above 40 dB, while the output fluctuates slightly. This laser can be used to design and fabricate multiwavelength laser array (MLA) for photonic integrated circuits (PICs).
- 15 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 29 (1) , 126-129
Experimental Demonstration of SBG Semiconductor Laser With Controlled Phase Shift
We designed and experimentally demonstrated a sampled Bragg grating (SBG) semiconductor laser with a controllable phase shift. The experimental results indicate that the introduced phase shift can be controlled by tuning injection current. The studied laser has good single longitudinal mode (SLM) performance of which side mode suppression ratio (SMSR) is even up to 61.1 dB. Under the constant total current 150 mA, the lasing wavelength can be continuously tuned about 1.1 nm and the SMSR keeps above 40 dB, while the output fluctuates slightly. This laser can be used to design and fabricate multiwavelength laser array (MLA) for photonic integrated circuits (PICs).
- 4 November 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10026, 100260W
The study of in-line DFB tunable laser based on REC technique
We studied the in-line DFB tunable laser based on REC technique. We mapped the contour lines of the P-I contour diagram of this in-line tunable laser into the wavelength-current contour map. And the maximum output power is obtained. Also the tuning currents are obtained. Firstly, we simulated the P-I contour as well as wavelength-current contour. Secondly, we experimentally demonstrated the mapped contour.
- 4 November 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10026, 100260W
The study of in-line DFB tunable laser based on REC technique
We studied the in-line DFB tunable laser based on REC technique. We mapped the contour lines of the P-I contour diagram of this in-line tunable laser into the wavelength-current contour map. And the maximum output power is obtained. Also the tuning currents are obtained. Firstly, we simulated the P-I contour as well as wavelength-current contour. Secondly, we experimentally demonstrated the mapped contour.
- Open Access
- 1 August 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 8 (4) , 1-7
Multisection DFB Tunable Laser Based on REC Technique and Tuning by Injection Current
Based on the reconstruction-equivalent-chirp technique and tuning only by the injection current, a multisection DFB tunable laser is demonstrated experimentally. At the temperature of 20°C, each laser can be tuned at about 3.4-3.6 nm with a side-mode suppressing ratio (SMSR) of over 35 dB from 30 to 170 mA, and the tuning speed is about 10-30 ms, which is much faster than that by the thermoelectric cooler. The results may help to realize very low cost tunable lasers in the future.
- 1 August 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 8 (4) , 1-7
Open AccessMultisection DFB Tunable Laser Based on REC Technique and Tuning by Injection Current
Based on the reconstruction-equivalent-chirp technique and tuning only by the injection current, a multisection DFB tunable laser is demonstrated experimentally. At the temperature of 20°C, each laser can be tuned at about 3.4-3.6 nm with a side-mode suppressing ratio (SMSR) of over 35 dB from 30 to 170 mA, and the tuning speed is about 10-30 ms, which is much faster than that by the thermoelectric cooler. The results may help to realize very low cost tunable lasers in the future.
- Open Access
- 23 February 2016
- Published by Optica Publishing Group in Photonics Research
- Vol. 4 (2) , 35-40
Periodic structural defects in Bragg gratings and their application in multiwavelength devices
In this paper, we present the finding that periodic structural defects (PSDs) along a Bragg grating can shift the Bragg wavelength. This effect is theoretically analyzed and confirmed by numerical calculation. We find that the Bragg wavelength shift is determined by the defect size and the period of the defects. The Bragg wavelength can be well tuned by properly designing the PSDs, and this may provide an alternative method to fabricate grating-based multiwavelength devices, including optical filter arrays and laser arrays. In regards to wavelength precision, the proposed method has an advantage over the traditional methods, where the Bragg wavelengths are changed directly by changing the grating period. In addition, the proposed method can maintain grating strength when tuning the wavelength since only the period of defects is changed. This will be a benefit for devices such as arrays.
- 23 February 2016
- Published by Optica Publishing Group in Photonics Research
- Vol. 4 (2) , 35-40
Open AccessPeriodic structural defects in Bragg gratings and their application in multiwavelength devices
In this paper, we present the finding that periodic structural defects (PSDs) along a Bragg grating can shift the Bragg wavelength. This effect is theoretically analyzed and confirmed by numerical calculation. We find that the Bragg wavelength shift is determined by the defect size and the period of the defects. The Bragg wavelength can be well tuned by properly designing the PSDs, and this may provide an alternative method to fabricate grating-based multiwavelength devices, including optical filter arrays and laser arrays. In regards to wavelength precision, the proposed method has an advantage over the traditional methods, where the Bragg wavelengths are changed directly by changing the grating period. In addition, the proposed method can maintain grating strength when tuning the wavelength since only the period of defects is changed. This will be a benefit for devices such as arrays.
- 1 July 2015
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 54 (7) , 076108
Wideband 20-wavelength 1.3- μ m distributed feedback semiconductor laser array using common holographic exposure
The first experimental realization of a 20-wavelength distributed feedback semiconductor laser array with a equivalent phase shift using common holographic exposure in the wavelength domain is reported. It shows very good linearity in lasing wavelengths with a deviation from to 0.45 nm. The threshold currents are between 13 and 17 mA. The side mode suppression ratios are all larger than 40 dB under the bias currents of 70 mA. The slope efficiencies at room temperature are all about . However, it only changes the micrometer-level sampling structures while the seed grating is uniform. Therefore, its fabrication cost is low.- 1 July 2015
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 54 (7) , 076108
Wideband 20-wavelength 1.3- μ m distributed feedback semiconductor laser array using common holographic exposure
The first experimental realization of a 20-wavelength distributed feedback semiconductor laser array with a equivalent phase shift using common holographic exposure in the wavelength domain is reported. It shows very good linearity in lasing wavelengths with a deviation from to 0.45 nm. The threshold currents are between 13 and 17 mA. The side mode suppression ratios are all larger than 40 dB under the bias currents of 70 mA. The slope efficiencies at room temperature are all about . However, it only changes the micrometer-level sampling structures while the seed grating is uniform. Therefore, its fabrication cost is low.- 1 June 2015
- Published by Elsevier in Science Bulletin
- Vol. 60 (11) , 1026-1032
Suppressing longitudinal spatial hole burning with dual assisted phase shifts in pitch-modulated DFB lasers
- 1 June 2015
- Published by Elsevier in Science Bulletin
- Vol. 60 (11) , 1026-1032
Suppressing longitudinal spatial hole burning with dual assisted phase shifts in pitch-modulated DFB lasers