Ramesh K. Metre
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ramesh K. Metre has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Prem Lama
CSIR-Indian Institute of Petroleum, Nanocatalysis Area, LSP Division, Mohkampur, Dehradun-248005, India
8 shared publications - Sunita Birara
Department of Chemistry Indian Institute of Technology Jodhpur Jodhpur Rajasthan India
7 shared publications Atanu Betal
6 shared publicationsPrem Lama
CSIR‐Indian Institute of Petroleum Dehradun India
6 shared publications- Satyajit Sahu
Department of Physics, Indian Institute of Technology Jodhpur, Jodhpur 342030, India
6 shared publications - Abhishek Mishra
Department of Chemistry, Indian Institute of Technology Jodhpur, Karwad, India
5 shared publications
Latest Publications
- 7 September 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (17) , e70978
Organic–Inorganic Hybrid Containing Hexachlorostannate Based on Pyridine‐Substituted Formazan as an Anode Material for Lithium‐Ion Batteries
The pursuit of alternative anode materials capable of providing higher energy density in lithium‐ion batteries (LIBs) represents a crucial challenge for both industrial and academic sectors. Tin‐based anodes have drawn considerable interest because of their commercial abundance and high theoretical capacities. However, their widespread acceptance is hindered by prominent volume expansion and consequent structural degradation during cycling in liquid‐electrolyte LIBs. Organic–inorganic hybrids are an important class of functional materials, as they combine the characteristics of inorganic and organic parts and lead to new properties through their cooperative interactions. In this context, this study presents the incorporation of hexachlorostannate based on formazan, [LH] 2 [SnCl 6 ] ( 1 ), where L is 1,5‐diphenyl‐3‐(4‐pyridyl)formazan, as a potential anode material for LIBs, which have been developed by the room temperature reaction of SnCl 4 with formazan ligand in the presence of HCl. The molecular structure of complex 1 was obtained using single‐crystal XRD and further characterized using various techniques. The electrochemical results of the synthesized organic–inorganic hybrid showed a reversible redox behavior for Li + ion battery, revealing a specific capacity of 145.5 mAh g −1 after 100 cycles at 50 mA g −1 . This work provides a new foundation for exploring the electrochemical potential of formazan‐based organic–inorganic hybrid ionic systems.
- 7 September 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (17) , e70978
Organic–Inorganic Hybrid Containing Hexachlorostannate Based on Pyridine‐Substituted Formazan as an Anode Material for Lithium‐Ion Batteries
The pursuit of alternative anode materials capable of providing higher energy density in lithium‐ion batteries (LIBs) represents a crucial challenge for both industrial and academic sectors. Tin‐based anodes have drawn considerable interest because of their commercial abundance and high theoretical capacities. However, their widespread acceptance is hindered by prominent volume expansion and consequent structural degradation during cycling in liquid‐electrolyte LIBs. Organic–inorganic hybrids are an important class of functional materials, as they combine the characteristics of inorganic and organic parts and lead to new properties through their cooperative interactions. In this context, this study presents the incorporation of hexachlorostannate based on formazan, [LH] 2 [SnCl 6 ] ( 1 ), where L is 1,5‐diphenyl‐3‐(4‐pyridyl)formazan, as a potential anode material for LIBs, which have been developed by the room temperature reaction of SnCl 4 with formazan ligand in the presence of HCl. The molecular structure of complex 1 was obtained using single‐crystal XRD and further characterized using various techniques. The electrochemical results of the synthesized organic–inorganic hybrid showed a reversible redox behavior for Li + ion battery, revealing a specific capacity of 145.5 mAh g −1 after 100 cycles at 50 mA g −1 . This work provides a new foundation for exploring the electrochemical potential of formazan‐based organic–inorganic hybrid ionic systems.
- 1 July 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (13) , e70878
Bis(Formazanate) Nickel(II) Complex as a Promising Active Material for Resistive Random Access Memory Device: Impact of the Metal Center on Memory Device Performance.
A mononuclear bis(formazanate) Ni(II) complex 1, [NiIIL2], with a redox-active formazan ligand, 1-(benzothiazol-2-yl)-5-(2-benzoyl-4-chlorophenyl)-3-phenyl, LH, was designed, synthesized, and structurally characterized in detail by numerous characterization techniques, including the single-crystal x-ray diffraction (SCXRD) technique. As evidenced by SC-XRD, complex 1 exists in an octahedral geometry, with the nickel (II) center being surrounded by two tridentate formazanate ligands. The cyclic voltammogram of the Ni(II) complex displays reversible redox events involving both the ligand and the metal center, highlighting the ability of the complex to undergo both oxidation and reduction processes. The [NiIIL2] complex was additionally utilized as the active material to construct a resistive switching memory device, Ag/NiIIL2/FTO, which exhibited excellent resistance switching behaviour with a high ION/IOFF ratio (104), low switching voltage, and admirable endurance stability (450 cycles) for nonvolatile memory based on emerging materials.
- 1 July 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (13) , e70878
Bis(Formazanate) Nickel(II) Complex as a Promising Active Material for Resistive Random Access Memory Device: Impact of the Metal Center on Memory Device Performance.
A mononuclear bis(formazanate) Ni(II) complex 1, [NiIIL2], with a redox-active formazan ligand, 1-(benzothiazol-2-yl)-5-(2-benzoyl-4-chlorophenyl)-3-phenyl, LH, was designed, synthesized, and structurally characterized in detail by numerous characterization techniques, including the single-crystal x-ray diffraction (SCXRD) technique. As evidenced by SC-XRD, complex 1 exists in an octahedral geometry, with the nickel (II) center being surrounded by two tridentate formazanate ligands. The cyclic voltammogram of the Ni(II) complex displays reversible redox events involving both the ligand and the metal center, highlighting the ability of the complex to undergo both oxidation and reduction processes. The [NiIIL2] complex was additionally utilized as the active material to construct a resistive switching memory device, Ag/NiIIL2/FTO, which exhibited excellent resistance switching behaviour with a high ION/IOFF ratio (104), low switching voltage, and admirable endurance stability (450 cycles) for nonvolatile memory based on emerging materials.
- Open Access
- 23 June 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (7) , e70383
High‐Efficiency Lithium‐Ion Anodes Based on Melt‐Impregnated Bismuth in Porous Nickel Frameworks
The demand for sustainable and efficient energy storage systems is continually rising. Researchers are actively exploring electrode materials with advanced properties. In lithium‐ion batteries, bismuth is emerging as a promising candidate (as a negative electrode) with impressive electrochemical properties (385 mAh g −1 , 3400 mAh cm −3 ), surpassing graphite (372 mAh g −1 , 780 mAh cm −3 ). However, the commercialization of bismuth has faced significant hurdles due to severe volume expansion (200%) and degradation during the lithiation process. This study introduces an innovative approach that uses melt‐impregnation of bismuth into porous nickel (Ni) current collectors to enhance the sustainability and performance of negative electrodes, with the Ni scaffold providing physical buffering. The resulting composite structure includes pure bismuth and a Ni–Bi intermetallic, which provides a combination of active and inactive chemical buffering. Due to this unique arrangement, the electrode maintains its structural integrity, delivering an average of 395 mAh g −1 over 100 cycles and demonstrating a specific capacity of 290 mAh g −1 after 100 cycles. This advancement marks a significant step forward in improving the electrochemical performance of lithium‐ion batteries.
- 23 June 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (7) , e70383
Open AccessHigh‐Efficiency Lithium‐Ion Anodes Based on Melt‐Impregnated Bismuth in Porous Nickel Frameworks
The demand for sustainable and efficient energy storage systems is continually rising. Researchers are actively exploring electrode materials with advanced properties. In lithium‐ion batteries, bismuth is emerging as a promising candidate (as a negative electrode) with impressive electrochemical properties (385 mAh g −1 , 3400 mAh cm −3 ), surpassing graphite (372 mAh g −1 , 780 mAh cm −3 ). However, the commercialization of bismuth has faced significant hurdles due to severe volume expansion (200%) and degradation during the lithiation process. This study introduces an innovative approach that uses melt‐impregnation of bismuth into porous nickel (Ni) current collectors to enhance the sustainability and performance of negative electrodes, with the Ni scaffold providing physical buffering. The resulting composite structure includes pure bismuth and a Ni–Bi intermetallic, which provides a combination of active and inactive chemical buffering. Due to this unique arrangement, the electrode maintains its structural integrity, delivering an average of 395 mAh g −1 over 100 cycles and demonstrating a specific capacity of 290 mAh g −1 after 100 cycles. This advancement marks a significant step forward in improving the electrochemical performance of lithium‐ion batteries.
- 23 June 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (12) , e70853
Electrocatalytic Water Oxidation by a Heterogenized Co (III)–Aminophenol Complex: Structure–Activity Relationship and DFT Mechanistic Insights
The advancement of efficient and cost‐effective molecular electrocatalysts is essential in the quest for sustainable energy solutions. The design and synthesis of a new mononuclear cobalt (III) complex with a redox‐active aminophenol ligand have been presented in this work. The formation of an anionic Co (III) complex 1 with triethylammonium acting as the counterion was confirmed using the crystallographic technique. Cyclic voltammetry studies were performed to assess the redox behavior of complex 1 in both the solid and solution states, demonstrating that quasi‐reversible oxidation events during the anodic sweep are crucially enabled by ligand‐centered sites. The synthesized cobalt complex displays strong catalytic aptitude for OER in 1 M KOH, requiring an overpotential of 410 mV to reach a current density of 10 mA cm −2 and exhibiting a low Tafel slope of 54.3 mV dec −1 , indicative of faster reaction kinetics. The retention of structural and morphological features following extended OER operation was assessed through post‐operation characterization using a variety of spectroscopic techniques. The plausible mechanism is proposed based on the combination of DFT analysis and experimental observations. The preferred pathway for water oxidation was identified by performing DFT calculations to determine oxidation potentials and the free energies of plausible intermediates.
- 23 June 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (12) , e70853
Electrocatalytic Water Oxidation by a Heterogenized Co (III)–Aminophenol Complex: Structure–Activity Relationship and DFT Mechanistic Insights
The advancement of efficient and cost‐effective molecular electrocatalysts is essential in the quest for sustainable energy solutions. The design and synthesis of a new mononuclear cobalt (III) complex with a redox‐active aminophenol ligand have been presented in this work. The formation of an anionic Co (III) complex 1 with triethylammonium acting as the counterion was confirmed using the crystallographic technique. Cyclic voltammetry studies were performed to assess the redox behavior of complex 1 in both the solid and solution states, demonstrating that quasi‐reversible oxidation events during the anodic sweep are crucially enabled by ligand‐centered sites. The synthesized cobalt complex displays strong catalytic aptitude for OER in 1 M KOH, requiring an overpotential of 410 mV to reach a current density of 10 mA cm −2 and exhibiting a low Tafel slope of 54.3 mV dec −1 , indicative of faster reaction kinetics. The retention of structural and morphological features following extended OER operation was assessed through post‐operation characterization using a variety of spectroscopic techniques. The plausible mechanism is proposed based on the combination of DFT analysis and experimental observations. The preferred pathway for water oxidation was identified by performing DFT calculations to determine oxidation potentials and the free energies of plausible intermediates.
- 2 March 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (13) , 5345-5358
Solution-processable homoleptic aluminum( iii ) catecholaldimine complex as an active material for RRAM switching device
Herein, We report the synthesis and characterization of a new mononuclear aluminum complex 1, containing a redox-active ligand (LH 3 ). The Complex 1 is further utilized as an active material for RRAM switching device.
- 2 March 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (13) , 5345-5358
Solution-processable homoleptic aluminum( iii ) catecholaldimine complex as an active material for RRAM switching device
Herein, We report the synthesis and characterization of a new mononuclear aluminum complex 1, containing a redox-active ligand (LH 3 ). The Complex 1 is further utilized as an active material for RRAM switching device.
- 15 January 2026
- Published by Wiley in Chempluschem
- Vol. 91 (1) , e202500571
Redox‐Active Bis‐Catecholaldimine Cu(II)‐Salen Complex with Hydroxyl Functionality as Cathode Material in Li‐Ion Battery
In this paper, we report the synthesis, structure, and application of bis‐catecholaldimine‐based Cu II ‐Salen complex as a cathode material in lithium‐ion battery. [Cu(LH 2 )] ( 1 ) complex was prepared using the ligand 6,6′‐{[Ethane‐1,2‐diylbis(azanylidene)]bis(methanylidene)}‐bis(3,5‐di‐ tert ‐butyl‐1,2‐dihydroxybenzene) (LH 4 ). The complex 1 was characterized structurally by single‐crystal X‐ray diffraction technique. It was also further characterized by various techniques such as high‐resolution mass spectrometry, Fourier Transform Infrared, thermogravimetric analysis, and elemental carbon, hydrogen, nitrogen (CHN) analysis. Complex 1 is a mononuclear complex that crystallizes in the triclinic P‐1 Space group with a Cu +2 ion present in a slightly distorted square planar geometry. Complex 1 [Cu(LH 2 )] was further employed as a cathode material for a secondary lithium‐ion battery, which shows superior cyclic and rate capability performance. The [Cu(LH 2 )] ( 1 ) electrode shows an average capacity of 73.5 mAh/g at 50 mA/g after rate capability test, as compared to the 21.8 mAh/g specific capacity for the LH 4 electrode. To understand the redox chemistry of the Cu‐complex, a series of Density functional theory (DFT) computations were carried out for the complex 1 and its corresponding one‐ and two‐electron reduced species.
- 15 January 2026
- Published by Wiley in Chempluschem
- Vol. 91 (1) , e202500571
Redox‐Active Bis‐Catecholaldimine Cu(II)‐Salen Complex with Hydroxyl Functionality as Cathode Material in Li‐Ion Battery
In this paper, we report the synthesis, structure, and application of bis‐catecholaldimine‐based Cu II ‐Salen complex as a cathode material in lithium‐ion battery. [Cu(LH 2 )] ( 1 ) complex was prepared using the ligand 6,6′‐{[Ethane‐1,2‐diylbis(azanylidene)]bis(methanylidene)}‐bis(3,5‐di‐ tert ‐butyl‐1,2‐dihydroxybenzene) (LH 4 ). The complex 1 was characterized structurally by single‐crystal X‐ray diffraction technique. It was also further characterized by various techniques such as high‐resolution mass spectrometry, Fourier Transform Infrared, thermogravimetric analysis, and elemental carbon, hydrogen, nitrogen (CHN) analysis. Complex 1 is a mononuclear complex that crystallizes in the triclinic P‐1 Space group with a Cu +2 ion present in a slightly distorted square planar geometry. Complex 1 [Cu(LH 2 )] was further employed as a cathode material for a secondary lithium‐ion battery, which shows superior cyclic and rate capability performance. The [Cu(LH 2 )] ( 1 ) electrode shows an average capacity of 73.5 mAh/g at 50 mA/g after rate capability test, as compared to the 21.8 mAh/g specific capacity for the LH 4 electrode. To understand the redox chemistry of the Cu‐complex, a series of Density functional theory (DFT) computations were carried out for the complex 1 and its corresponding one‐ and two‐electron reduced species.
- 14 November 2025
- Published by Springer Nature in Journal of Chemical Crystallography
- Vol. 56 (1) , 8
Synthesis of a Diorganotin Sulfide Employing O→Sn Intramolecular Coordination: An Insight to the Crystal Structure and Hirshfeld Surface Analysis
- 14 November 2025
- Published by Springer Nature in Journal of Chemical Crystallography
- Vol. 56 (1) , 8
Synthesis of a Diorganotin Sulfide Employing O→Sn Intramolecular Coordination: An Insight to the Crystal Structure and Hirshfeld Surface Analysis
- 19 August 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54 (33) , 12567-12578
Dinuclear aluminum complex as an active material for RRAM switching devices
We report the synthesis and structural characterization of dinuclear aluminum complex 1, containing redox-active bis-catecholaldimine ligand (LH4). The fabricated RRAM devices using Complex 1 displayed excellent resistive switching characteristics.
- 19 August 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54 (33) , 12567-12578
Dinuclear aluminum complex as an active material for RRAM switching devices
We report the synthesis and structural characterization of dinuclear aluminum complex 1, containing redox-active bis-catecholaldimine ligand (LH4). The fabricated RRAM devices using Complex 1 displayed excellent resistive switching characteristics.
- 28 January 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54 (10) , 4120-4134
Bis(formazanate) iron( ii ) complexes as cathode materials for one-compartment H 2 O 2 fuel cells
In this paper, we describe the synthesis of two bis(formazanate) Fe( ii ) complexes based on redox-active benzothiazole-substituted formazanate ligands, which were further employed as cathodes in one-compartment membrane-less H 2 O 2 fuel cell.
- 28 January 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54 (10) , 4120-4134
Bis(formazanate) iron( ii ) complexes as cathode materials for one-compartment H 2 O 2 fuel cells
In this paper, we describe the synthesis of two bis(formazanate) Fe( ii ) complexes based on redox-active benzothiazole-substituted formazanate ligands, which were further employed as cathodes in one-compartment membrane-less H 2 O 2 fuel cell.
- 3 January 2025
- Published by Wiley in Chempluschem
- Vol. 90 (3) , e202400696
Antimicrobial Potential of a Formazanate‐Based Mercury(II) Complex: In Vitro ‐ and In Silico ‐Based Insights
Herein, we present a distorted square pyramidal mercury complex, [Hg II (L)Cl] ( 1 ), based on a quinoline‐substituted formazan ligand LH[3‐Cyano‐1,5‐(quinolin‐8‐yl)formazan], which was evaluated for its anti‐bacterial activity in vitro . Complex 1 was prepared by refluxing 3‐Cyano‐1,5‐(quinolin‐8‐yl)formazan ligand and mercury chloride(II) in equimolar quantity and was characterized utilizing a range of analytical methods, including single crystal X‐ray diffraction (SCXRD) technique. The crystal packing in complex 1 has been elucidated using supramolecular investigations, which have shown the presence of fascinating Hg−Cl⋅⋅⋅Hg intermolecular spodium bonds of the order 3.348 Å. The antimicrobial activity of the formazanate‐based mercury(II) complex ( 1 ) was assessed against Gram‐positive ( Staphylococcus aureus and Bacillus subtilis ) and Gram‐negative ( Escherichia coli and Pseudomonas aeruginosa) bacterial pathogens. In addition, the plausible therapeutic target of the formazanate‐based mercury(II) complex was determined through in silico pharmacophore‐guided rational drug designing approach. Based on the in silico results, a conceivable molecular mechanism of the observed bactericidal action of the newly synthesized [Hg II (L)Cl] complex ( 1 ) has also been suggested.
- 3 January 2025
- Published by Wiley in Chempluschem
- Vol. 90 (3) , e202400696
Antimicrobial Potential of a Formazanate‐Based Mercury(II) Complex: In Vitro ‐ and In Silico ‐Based Insights
Herein, we present a distorted square pyramidal mercury complex, [Hg II (L)Cl] ( 1 ), based on a quinoline‐substituted formazan ligand LH[3‐Cyano‐1,5‐(quinolin‐8‐yl)formazan], which was evaluated for its anti‐bacterial activity in vitro . Complex 1 was prepared by refluxing 3‐Cyano‐1,5‐(quinolin‐8‐yl)formazan ligand and mercury chloride(II) in equimolar quantity and was characterized utilizing a range of analytical methods, including single crystal X‐ray diffraction (SCXRD) technique. The crystal packing in complex 1 has been elucidated using supramolecular investigations, which have shown the presence of fascinating Hg−Cl⋅⋅⋅Hg intermolecular spodium bonds of the order 3.348 Å. The antimicrobial activity of the formazanate‐based mercury(II) complex ( 1 ) was assessed against Gram‐positive ( Staphylococcus aureus and Bacillus subtilis ) and Gram‐negative ( Escherichia coli and Pseudomonas aeruginosa) bacterial pathogens. In addition, the plausible therapeutic target of the formazanate‐based mercury(II) complex was determined through in silico pharmacophore‐guided rational drug designing approach. Based on the in silico results, a conceivable molecular mechanism of the observed bactericidal action of the newly synthesized [Hg II (L)Cl] complex ( 1 ) has also been suggested.