Hasti Daraei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Hasti Daraei has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Alok Mittal
Department of Chemistry, Maulana Azad National Institute of Technology, Bhopal 462003, India
4 shared publications - Mohammad Noori Sepehr
Department of Environmental Health Engineering, Faculty of Health, Alborz University of Medical Sciences, Karaj, Iran
4 shared publications - Ahmadreza Yazdanbakhsh
Department of Environmental Health Engineering, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran
3 shared publications Ahmad Reza Yazdanbakhsh
2 shared publicationsF. Daraei
M.Sc of Food Science and Technology, Ministry of Agriculture, Central Organization for Rural Co-operative of Iran
2 shared publications- Javad Javanbakht
Department of Pathology, Faculty of Veterinary Medicine, Tehran University, Tehran, Iran.
2 shared publications
Latest Publications
- Open Access
- 20 May 2026
- Published by Springer Nature in Applied Water Science
- Vol. 16 (6)
Removal of forever chemicals (PFAS) using novel electrocoagulation approaches integrated with renewable energy sources as a green and cutting-edge technology: mechanisms, key parameters, challenges, and opportunities
Per- and polyfluoroalkyl substances (PFASs) are recognized as “forever chemicals” highly stable compounds that exhibit remarkable resistance to conventional biological and physicochemical degradation processes, thereby posing a persistent threat to aquatic ecosystems and public health. In recent years, electrocoagulation (EC) has emerged as a promising technology for PFAS removal, leveraging multifaceted mechanisms that include the in-situ formation of metal hydroxide flocs, electroflotation, and electro-oxidation. This narrative review article provides a descriptive synthesis of EC-based approaches for PFAS management, grounded in a narrative review methodology and informed by a critical analysis of 28 peer-reviewed studies published between 2010 and 2025. The review systematically evaluates the critical influence of key operational parameters, including electrode material (iron, aluminum, zinc, and hybrid configurations), current density, pH, electrolyte type, and aeration, on PFAS removal efficiency. It further clarifies that complete degradation and mineralization of PFAS compounds generally require the integration of EC with hybrid advanced oxidation processes (AOPs). The performance of the EC process is also assessed through key metrics such as electrical energy per order (EEO), alongside operational cost drivers, including electrode consumption, sludge generation, and the complexities associated with sludge management. Moreover, the integration of EC with renewable energy sources, solar, wind, and microbial is examined not only in terms of its potential to enhance sustainability but also with explicit consideration of associated practical challenges, such as energy intermittency, the necessity of energy storage systems, and the critical need for precise control of direct current (DC) voltage and current parameters. Finally, this review identifies critical knowledge gaps in PFAS-laden sludge management, electrode passivation, process scalability, and techno-economic feasibility, and proposes a forward-looking research agenda aimed at transforming EC from a laboratory-scale concept into a practical, sustainable, and field-deployable technology, particularly for the treatment of PFAS-contaminated water resources.
- 20 May 2026
- Published by Springer Nature in Applied Water Science
- Vol. 16 (6)
Open AccessRemoval of forever chemicals (PFAS) using novel electrocoagulation approaches integrated with renewable energy sources as a green and cutting-edge technology: mechanisms, key parameters, challenges, and opportunities
Per- and polyfluoroalkyl substances (PFASs) are recognized as “forever chemicals” highly stable compounds that exhibit remarkable resistance to conventional biological and physicochemical degradation processes, thereby posing a persistent threat to aquatic ecosystems and public health. In recent years, electrocoagulation (EC) has emerged as a promising technology for PFAS removal, leveraging multifaceted mechanisms that include the in-situ formation of metal hydroxide flocs, electroflotation, and electro-oxidation. This narrative review article provides a descriptive synthesis of EC-based approaches for PFAS management, grounded in a narrative review methodology and informed by a critical analysis of 28 peer-reviewed studies published between 2010 and 2025. The review systematically evaluates the critical influence of key operational parameters, including electrode material (iron, aluminum, zinc, and hybrid configurations), current density, pH, electrolyte type, and aeration, on PFAS removal efficiency. It further clarifies that complete degradation and mineralization of PFAS compounds generally require the integration of EC with hybrid advanced oxidation processes (AOPs). The performance of the EC process is also assessed through key metrics such as electrical energy per order (EEO), alongside operational cost drivers, including electrode consumption, sludge generation, and the complexities associated with sludge management. Moreover, the integration of EC with renewable energy sources, solar, wind, and microbial is examined not only in terms of its potential to enhance sustainability but also with explicit consideration of associated practical challenges, such as energy intermittency, the necessity of energy storage systems, and the critical need for precise control of direct current (DC) voltage and current parameters. Finally, this review identifies critical knowledge gaps in PFAS-laden sludge management, electrode passivation, process scalability, and techno-economic feasibility, and proposes a forward-looking research agenda aimed at transforming EC from a laboratory-scale concept into a practical, sustainable, and field-deployable technology, particularly for the treatment of PFAS-contaminated water resources.
- Open Access
- 5 April 2026
- Published by Maad Rayan Publishing Company in Environmental Health Engineering and Management
- Vol. 13, 1-30
A Comprehensive Review of Photochemical Degradation: An Advanced Oxidation Process for the Decomposition and Mineralization of BTEX Compounds in Gas Phase
Background: BTEX compounds are the most significant VOCs due to their carcinogenic potential and severe adverse effects on human health and the environment. Their removal from polluted air is therefore essential. The present study aimed to review and compare photocatalytic methods for removing BTEX compounds from air. Methods: A comprehensive review was conducted by searching databases on Scopus, ScienceDirect, EBSCO, RSC, and PubMed from 2013 to 2024. A total of 245 articles were found, and 52 were finally reviewed, covering variables such as BTEX analysis methods, photocatalytic processes for their removal, their advantages and disadvantages, and the parameters affecting these processes. Results: According to the findings, non-destructive methods are not suitable for air pollution control because they cannot eliminate pollutants and rely solely on transport to remove them. Destructive methods such as thermal oxidation offer higher degradation efficiency (up to 95%), but are associated with high energy consumption and formation of by-products. Photocatalytic degradation has emerged as a promising, environmentally friendly, and energy-efficient approach for VOC removal. The use of semiconductor nanoparticles such as TiO₂, ZnO, and V₂O₅, along with modifications to the visible light absorption range, reduction in energy demand and regeneration, enhancement of photocatalyst stability, and increased degradation efficiency (up to 99%). Conclusion: Finally, the energy consumption and environmental compatibility evaluation confirmed that the doped photocatalysts not only offer superior performance but also comply well with the principles of green chemistry and sustainable environmental practices management.
- 5 April 2026
- Published by Maad Rayan Publishing Company in Environmental Health Engineering and Management
- Vol. 13, 1-30
Open AccessA Comprehensive Review of Photochemical Degradation: An Advanced Oxidation Process for the Decomposition and Mineralization of BTEX Compounds in Gas Phase
Background: BTEX compounds are the most significant VOCs due to their carcinogenic potential and severe adverse effects on human health and the environment. Their removal from polluted air is therefore essential. The present study aimed to review and compare photocatalytic methods for removing BTEX compounds from air. Methods: A comprehensive review was conducted by searching databases on Scopus, ScienceDirect, EBSCO, RSC, and PubMed from 2013 to 2024. A total of 245 articles were found, and 52 were finally reviewed, covering variables such as BTEX analysis methods, photocatalytic processes for their removal, their advantages and disadvantages, and the parameters affecting these processes. Results: According to the findings, non-destructive methods are not suitable for air pollution control because they cannot eliminate pollutants and rely solely on transport to remove them. Destructive methods such as thermal oxidation offer higher degradation efficiency (up to 95%), but are associated with high energy consumption and formation of by-products. Photocatalytic degradation has emerged as a promising, environmentally friendly, and energy-efficient approach for VOC removal. The use of semiconductor nanoparticles such as TiO₂, ZnO, and V₂O₅, along with modifications to the visible light absorption range, reduction in energy demand and regeneration, enhancement of photocatalyst stability, and increased degradation efficiency (up to 99%). Conclusion: Finally, the energy consumption and environmental compatibility evaluation confirmed that the doped photocatalysts not only offer superior performance but also comply well with the principles of green chemistry and sustainable environmental practices management.
- Open Access
- 1 March 2026
- Published by InkVista Publishing House
- Vol. 13 (4) , 494-510
Isolation and identification of microplastic-degrading bacteria from polluted areas around the petrochemical complex (case study: Lorestan Petrochemical)
Background: The mass production, widespread use, and improper disposal of plastic products have led to significant environmental pollution. Over time, larger plastic polymers break down into smaller particles known as microplastics. This study aimed to isolate and identify indigenous beneficial bacteria capable of degrading microplastics in the vicinity of the ...
- 1 March 2026
- Published by InkVista Publishing House
- Vol. 13 (4) , 494-510
Open AccessIsolation and identification of microplastic-degrading bacteria from polluted areas around the petrochemical complex (case study: Lorestan Petrochemical)
Background: The mass production, widespread use, and improper disposal of plastic products have led to significant environmental pollution. Over time, larger plastic polymers break down into smaller particles known as microplastics. This study aimed to isolate and identify indigenous beneficial bacteria capable of degrading microplastics in the vicinity of the ...
- Open Access
- 1 August 2024
- Published by Apex Publishing in Journal of Jiroft University of Medical Sciences
- Vol. 11 (2) , 1565-1574
The Effect of Climatic Factors on the Incidence of Urban and Rural Cutaneous Leishmaniosis in Kerman and Arzooieh
Introduction: The prevalence and spread of the prevailing diseases, including the cutaneous leishmaniosis, is affected by ecological factors in addition to economic, social and cultural issues. Therefore, the present study was conducted to investigate the effect of climatic factors on the incidence of urban and rural cutaneous leishmaniosis in Kerman ...
- 1 August 2024
- Published by Apex Publishing in Journal of Jiroft University of Medical Sciences
- Vol. 11 (2) , 1565-1574
Open AccessThe Effect of Climatic Factors on the Incidence of Urban and Rural Cutaneous Leishmaniosis in Kerman and Arzooieh
Introduction: The prevalence and spread of the prevailing diseases, including the cutaneous leishmaniosis, is affected by ecological factors in addition to economic, social and cultural issues. Therefore, the present study was conducted to investigate the effect of climatic factors on the incidence of urban and rural cutaneous leishmaniosis in Kerman ...
- Open Access
- 2 November 2023
- Published by Springer Nature in Applied Water Science
- Vol. 13 (11) , 1-18
Green synthesis of AgCoFe2O4@Ch/AC as a recyclable, magnetic nanohybrid heterogeneous catalyst in photodegradation of ceftriaxone from aqueous solutions with effluent bioassay
Ceftriaxone (CFTR) is among the most commonly used antibiotics in the treatment of different types of bacterial infections and widespread pneumonias. It was also known as one of the most frequently prescribed antibiotics during the Corona pandemic. This drug has a longer half-life than other antibiotics. In this research, the heterogeneous magnetic nanophotocatalyst AgCoFe2O4@Chitosan(Ch)/activated carbon (AC) was synthesized by co-precipitation method under microwave waves. The catalyst structure was characterized by XRD, FTIR, FESEM, EDS, mapping, line scan, BET, VSM and DRS analyzers. Then, the effect of pH, CFTR concentration, nanophotocatalyst dose and irradiation time on the photocatalytic process efficiency was investigated. The analyses showed that the catalyst was synthesized on a nanometer scale, high surface area (60.044 m2/g), high magnetic strength (Ms = 10.39 emu/g) and appropriate optical activity with band gap (3.1 eV). The highest removal efficiency at pH = 3, CFTR concentration of 5 mg/L, dose of 0.24 g/L, and irradiation time of 60 min was obtained at 98.8% and 79.01% for synthetic and real wastewater samples, respectively. The reaction kinetics followed the pseudo-first-order and Langmuir–Hinshelwood kinetic models with KC = 0.23 mg/L min and KL−H = 0.168 L/mg. The recovered catalyst was able to remove CFTR with an efficiency of 80.16% after 4 reuse cycles. The results of scavenger radical tests showed that the main active radical species was $$^{ \cdot } {\text{OH}}$$ . The obtained results from the effluent toxicity on the germination index of lettuce, watercress, radish and tomato seeds showed a significant reduction in the environmental hazards of the effluent. Due to the high efficiency, this nanophotocatalyst can be used for the treatment of pharmaceutical and hospital wastewaters, and the effluent has the least toxicity for the environment.- 2 November 2023
- Published by Springer Nature in Applied Water Science
- Vol. 13 (11) , 1-18
Open AccessGreen synthesis of AgCoFe2O4@Ch/AC as a recyclable, magnetic nanohybrid heterogeneous catalyst in photodegradation of ceftriaxone from aqueous solutions with effluent bioassay
Ceftriaxone (CFTR) is among the most commonly used antibiotics in the treatment of different types of bacterial infections and widespread pneumonias. It was also known as one of the most frequently prescribed antibiotics during the Corona pandemic. This drug has a longer half-life than other antibiotics. In this research, the heterogeneous magnetic nanophotocatalyst AgCoFe2O4@Chitosan(Ch)/activated carbon (AC) was synthesized by co-precipitation method under microwave waves. The catalyst structure was characterized by XRD, FTIR, FESEM, EDS, mapping, line scan, BET, VSM and DRS analyzers. Then, the effect of pH, CFTR concentration, nanophotocatalyst dose and irradiation time on the photocatalytic process efficiency was investigated. The analyses showed that the catalyst was synthesized on a nanometer scale, high surface area (60.044 m2/g), high magnetic strength (Ms = 10.39 emu/g) and appropriate optical activity with band gap (3.1 eV). The highest removal efficiency at pH = 3, CFTR concentration of 5 mg/L, dose of 0.24 g/L, and irradiation time of 60 min was obtained at 98.8% and 79.01% for synthetic and real wastewater samples, respectively. The reaction kinetics followed the pseudo-first-order and Langmuir–Hinshelwood kinetic models with KC = 0.23 mg/L min and KL−H = 0.168 L/mg. The recovered catalyst was able to remove CFTR with an efficiency of 80.16% after 4 reuse cycles. The results of scavenger radical tests showed that the main active radical species was $$^{ \cdot } {\text{OH}}$$ . The obtained results from the effluent toxicity on the germination index of lettuce, watercress, radish and tomato seeds showed a significant reduction in the environmental hazards of the effluent. Due to the high efficiency, this nanophotocatalyst can be used for the treatment of pharmaceutical and hospital wastewaters, and the effluent has the least toxicity for the environment. - 1 March 2019
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 366, 114-123
Responses of flocculated activated sludge to bimetallic Ag-Fe nanoparticles toxicity: Performance, activity enzymatic, and bacterial community shift
- 1 March 2019
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 366, 114-123
Responses of flocculated activated sludge to bimetallic Ag-Fe nanoparticles toxicity: Performance, activity enzymatic, and bacterial community shift
- Open Access
- 1 September 2017
- Published by Elsevier in Desalination and Water Treatment
- Vol. 90, 294-298
Investigation of adsorption performance of activated carbon prepared from waste tire for the removal of methylene blue dye from wastewater
- 1 September 2017
- Published by Elsevier in Desalination and Water Treatment
- Vol. 90, 294-298
Open AccessInvestigation of adsorption performance of activated carbon prepared from waste tire for the removal of methylene blue dye from wastewater
- RetractionOpen Access
- 4 November 2016
- Published by Springer Nature in Cancer Cell International
- Vol. 16 (1) , 83
Retraction Note to: Diagnosis, classification and grading of canine mammary tumours as a model to study human breast cancer: an Clinico-Cytohistopathological study with environmental factors influencing public health and medicine
[This retracts the article DOI: 10.1186/1475-2867-13-79.].
- 4 November 2016
- Published by Springer Nature in Cancer Cell International
- Vol. 16 (1) , 83
RetractionOpen AccessRetraction Note to: Diagnosis, classification and grading of canine mammary tumours as a model to study human breast cancer: an Clinico-Cytohistopathological study with environmental factors influencing public health and medicine
[This retracts the article DOI: 10.1186/1475-2867-13-79.].
- 5 April 2016
- Published by IWA Publishing in Water Science & Technology
- Vol. 73 (12) , 2998-3007
Performance of iron nano particles and bimetallic Ni/Fe nanoparticles in removal of amoxicillin trihydrate from synthetic wastewater
In the present study, the degradation of Amoxicillin Trihydrate (AMT) using synthesized nZVI and Cs-Fe/Ni in water was investigated. A central composite design combined with response surface methodology (RSM) and optimization was utilized for maximizing the AMT reduction by the nanoparticles-water system. The importance of the various variables and their interactions were analyzed using variance (ANOVA) and t-test. The effects of independent parameters were tested and the results showed that the initial concentration of AMT, pH, and nanoparticles dosage were all significant factors. Field-emission scanning electron microscopy image indicating that chitosan acts as a stabilizer preventing the agglomeration of nanoparticles. Also, chitosan and Ni were increased the specific surface area of Cs-Fe/Ni. X-ray diffraction confirmed the existence of Fe0 in fresh sample and the presence of Fe(II) and Fe(III) after the reaction with AMT. This study demonstrates that the NZVI technology could be a promising approach for antibiotic wastewater treatment.
- 5 April 2016
- Published by IWA Publishing in Water Science & Technology
- Vol. 73 (12) , 2998-3007
Performance of iron nano particles and bimetallic Ni/Fe nanoparticles in removal of amoxicillin trihydrate from synthetic wastewater
In the present study, the degradation of Amoxicillin Trihydrate (AMT) using synthesized nZVI and Cs-Fe/Ni in water was investigated. A central composite design combined with response surface methodology (RSM) and optimization was utilized for maximizing the AMT reduction by the nanoparticles-water system. The importance of the various variables and their interactions were analyzed using variance (ANOVA) and t-test. The effects of independent parameters were tested and the results showed that the initial concentration of AMT, pH, and nanoparticles dosage were all significant factors. Field-emission scanning electron microscopy image indicating that chitosan acts as a stabilizer preventing the agglomeration of nanoparticles. Also, chitosan and Ni were increased the specific surface area of Cs-Fe/Ni. X-ray diffraction confirmed the existence of Fe0 in fresh sample and the presence of Fe(II) and Fe(III) after the reaction with AMT. This study demonstrates that the NZVI technology could be a promising approach for antibiotic wastewater treatment.