Javier Seron
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Javier Seron has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Alfonso García-Cerezo
Universidad de Málaga
11 shared publications - Anthony Mandow
Universidad de Málaga
7 shared publications - Jesús Morales
Universidad de Málaga
7 shared publications - Jorge Luis Martínez Rodríguez
Universidad de Málaga
6 shared publications - Juan Jesus Fernandez Lozano
University of Malaga
6 shared publications - Jose Antonio Gomez-Ruiz
University of Malaga
5 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- p. 1-12
Real-Time Victim Positioning With One Search Agent Using Wi-Fi Fine Time Measurement
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- p. 1-12
Open AccessReal-Time Victim Positioning With One Search Agent Using Wi-Fi Fine Time Measurement
- Open Access
- 14 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 86949-86967
Real-Time FTM-Based Victim Positioning System Using Heterogeneous Robots in Remote and Outdoor Scenarios
Accurate victim localization in Remote, Outdoor, Unstructured, and Disaster (ROUD) scenarios remains a significant challenge due to limited infrastructure, complex terrains, and time constraints inherent in Search and Rescue (SAR) operations. This article introduces an innovative real-time positioning system that leverages Fine Time Measurement (FTM), a feature of the IEEE 802.11mc amendment, to detect WiFi-enabled devices typically carried by potential victims. The system integrates a Hybrid Wireless Sensor Network (H-WSN) composed of static and mobile anchors mounted on Uncrewed Ground and Aerial Vehicles (UGVs and UAVs), within a Robot Operating System (ROS)-based architecture. A centralized Feedback Information System (FIS) processes real-time RTT data from the field, executes a multilateration algorithm, and provides live geolocation updates to SAR coordinators. The system was validated during a large-scale SAR drill, successfully locating two types of victims—a semi-hidden surface victim and a buried victim—within a 2000m2 area in under 7 minutes, without any filtering or post-processing. The maximum positioning error was 22.87m for the buried victim and 17.14m for the surface one. The complete system, including source code, dataset, and a containerized environment, is openly available to support reproducibility and further research, highlighting the potential of robotic and wireless technologies to enhance disaster response through accurate, real-time localization in complex environments.
- 14 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 86949-86967
Open AccessReal-Time FTM-Based Victim Positioning System Using Heterogeneous Robots in Remote and Outdoor Scenarios
Accurate victim localization in Remote, Outdoor, Unstructured, and Disaster (ROUD) scenarios remains a significant challenge due to limited infrastructure, complex terrains, and time constraints inherent in Search and Rescue (SAR) operations. This article introduces an innovative real-time positioning system that leverages Fine Time Measurement (FTM), a feature of the IEEE 802.11mc amendment, to detect WiFi-enabled devices typically carried by potential victims. The system integrates a Hybrid Wireless Sensor Network (H-WSN) composed of static and mobile anchors mounted on Uncrewed Ground and Aerial Vehicles (UGVs and UAVs), within a Robot Operating System (ROS)-based architecture. A centralized Feedback Information System (FIS) processes real-time RTT data from the field, executes a multilateration algorithm, and provides live geolocation updates to SAR coordinators. The system was validated during a large-scale SAR drill, successfully locating two types of victims—a semi-hidden surface victim and a buried victim—within a 2000m2 area in under 7 minutes, without any filtering or post-processing. The maximum positioning error was 22.87m for the buried victim and 17.14m for the surface one. The complete system, including source code, dataset, and a containerized environment, is openly available to support reproducibility and further research, highlighting the potential of robotic and wireless technologies to enhance disaster response through accurate, real-time localization in complex environments.
- Open Access
- 5 December 2022
- Published by Springer Nature in Intelligent Service Robotics
- Vol. 16 (1) , 1-14
Optimal path planning using a continuous anisotropic model for navigation on irregular terrains
Mobile robots usually need to minimize energy when they are traversing uneven terrains. To reach a location of interest, one strategy consists of making the robot follow the path that demands the least possible amount of energy. Yet, its calculation is not trivial with irregular surfaces. Gravity makes the energy consumption of a robot change according to its heading. Such a variation is subject to the terramechanic characteristics of the surface. This paper introduces a cost function that addresses this variation when traversing slopes. This function presents direction-dependency (anisotropic) and returns the cost for all directions (continuous).. Moreover, it is compatible with the Ordered Upwind Method, which allows finding globally optimal paths in a deterministic way. Besides, the segments of these paths are not restricted to the shape of a grid. Finally, this paper also introduces the description and discussion of a simulation experiment. It served to analyse what kinds of terrain motivate the use of anisotropy. The Ordered Upwind Method was executed on a virtual crater with different terrain parameter configurations, using both isotropic (direction-non-dependent) and anisotropic cost functions. The results evince how in certain situations the use of an anisotropic cost function instead of an isotropic one produces a path that reduces the accumulated cost by up to 20%.
- 5 December 2022
- Published by Springer Nature in Intelligent Service Robotics
- Vol. 16 (1) , 1-14
Open AccessOptimal path planning using a continuous anisotropic model for navigation on irregular terrains
Mobile robots usually need to minimize energy when they are traversing uneven terrains. To reach a location of interest, one strategy consists of making the robot follow the path that demands the least possible amount of energy. Yet, its calculation is not trivial with irregular surfaces. Gravity makes the energy consumption of a robot change according to its heading. Such a variation is subject to the terramechanic characteristics of the surface. This paper introduces a cost function that addresses this variation when traversing slopes. This function presents direction-dependency (anisotropic) and returns the cost for all directions (continuous).. Moreover, it is compatible with the Ordered Upwind Method, which allows finding globally optimal paths in a deterministic way. Besides, the segments of these paths are not restricted to the shape of a grid. Finally, this paper also introduces the description and discussion of a simulation experiment. It served to analyse what kinds of terrain motivate the use of anisotropy. The Ordered Upwind Method was executed on a virtual crater with different terrain parameter configurations, using both isotropic (direction-non-dependent) and anisotropic cost functions. The results evince how in certain situations the use of an anisotropic cost function instead of an isotropic one produces a path that reduces the accumulated cost by up to 20%.
- Open Access
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 64618-64637
Realistic Deployment of Hybrid Wireless Sensor Networks Based on ZigBee and LoRa for Search and Rescue Applications
Search and Rescue operations in emergency response to natural or human catastrophes have the main objective of locating and rescuing potential victims as fast as possible, thus quick response and accurate actions are mandatory. While standard communications may be affected, a Wireless Sensor Network can be deployed to support the rescue team. This kind of network allows data acquisition close to events and enables persistence over time, among other advantages. However, enhancements must be made to improve the adaptation to this kind of scenario. This work presents two Hybrid Wireless Sensor Networks, based on ZigBee and LoRa, developed to address some of the challenges that Search and Rescue operations pose to the use of Wireless Sensor Networks, and tested in realistic scenarios in cooperation with first responders. Likewise, several software developments that increase the performance of the networks are described. Finally, the conclusions presented, and the lessons learnt are supported by a high amount of data, gathered in realistic exercises in cooperation with civilian and military first responders.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 64618-64637
Open AccessRealistic Deployment of Hybrid Wireless Sensor Networks Based on ZigBee and LoRa for Search and Rescue Applications
Search and Rescue operations in emergency response to natural or human catastrophes have the main objective of locating and rescuing potential victims as fast as possible, thus quick response and accurate actions are mandatory. While standard communications may be affected, a Wireless Sensor Network can be deployed to support the rescue team. This kind of network allows data acquisition close to events and enables persistence over time, among other advantages. However, enhancements must be made to improve the adaptation to this kind of scenario. This work presents two Hybrid Wireless Sensor Networks, based on ZigBee and LoRa, developed to address some of the challenges that Search and Rescue operations pose to the use of Wireless Sensor Networks, and tested in realistic scenarios in cooperation with first responders. Likewise, several software developments that increase the performance of the networks are described. Finally, the conclusions presented, and the lessons learnt are supported by a high amount of data, gathered in realistic exercises in cooperation with civilian and military first responders.
- Open Access
Development and Implementation of a Hybrid Wireless Sensor Network of Low Power and Long Range for Urban Environments
The urban population, worldwide, is growing exponentially and with it the demand for information on pollution levels, vehicle traffic, or available parking, giving rise to citizens connected to their environment. This article presents an experimental long range (LoRa) and low power consumption network, with a combination of static and mobile wireless sensors (hybrid architecture) to tune and validate concentrator placement, to obtain a large coverage in an urban environment. A mobile node has been used, carrying a gateway and various sensors. The Activation By Personalization (ABP) mode has been used, justified for urban applications requiring multicasting. This allows to compare the coverage of each static gateway, being able to make practical decisions about its location. With this methodology, it has been possible to provide service to the city of Malaga, through a single concentrator node. The information acquired is synchronized in an external database, to monitor the data in real time, being able to geolocate the dataframes through web mapping services. This work presents the development and implementation of a hybrid wireless sensor network of long range and low power, configured and tuned to achieve efficient performance in a mid-size city, and tested in experiments in a real urban environment.
Open AccessDevelopment and Implementation of a Hybrid Wireless Sensor Network of Low Power and Long Range for Urban Environments
The urban population, worldwide, is growing exponentially and with it the demand for information on pollution levels, vehicle traffic, or available parking, giving rise to citizens connected to their environment. This article presents an experimental long range (LoRa) and low power consumption network, with a combination of static and mobile wireless sensors (hybrid architecture) to tune and validate concentrator placement, to obtain a large coverage in an urban environment. A mobile node has been used, carrying a gateway and various sensors. The Activation By Personalization (ABP) mode has been used, justified for urban applications requiring multicasting. This allows to compare the coverage of each static gateway, being able to make practical decisions about its location. With this methodology, it has been possible to provide service to the city of Malaga, through a single concentrator node. The information acquired is synchronized in an external database, to monitor the data in real time, being able to geolocate the dataframes through web mapping services. This work presents the development and implementation of a hybrid wireless sensor network of long range and low power, configured and tuned to achieve efficient performance in a mid-size city, and tested in experiments in a real urban environment.
- Open Access
Analysis of 3D Scan Measurement Distribution with Application to a Multi-Beam Lidar on a Rotating Platform
Multi-beam lidar (MBL) rangefinders are becoming increasingly compact, light, and accessible 3D sensors, but they offer limited vertical resolution and field of view. The addition of a degree-of-freedom to build a rotating multi-beam lidar (RMBL) has the potential to become a common solution for affordable rapid full-3D high resolution scans. However, the overlapping of multiple-beams caused by rotation yields scanning patterns that are more complex than in rotating single beam lidar (RSBL). In this paper, we propose a simulation-based methodology to analyze 3D scanning patterns which is applied to investigate the scan measurement distribution produced by the RMBL configuration. With this purpose, novel contributions include: (i) the adaption of a recent spherical reformulation of Ripley’s K function to assess 3D sensor data distribution on a hollow sphere simulation; (ii) a comparison, both qualitative and quantitative, between scan patterns produced by an ideal RMBL based on a Velodyne VLP-16 (Puck) and those of other 3D scan alternatives (i.e., rotating 2D lidar and MBL); and (iii) a new RMBL implementation consisting of a portable tilting platform for VLP-16 scanners, which is presented as a case study for measurement distribution analysis as well as for the discussion of actual scans from representative environments. Results indicate that despite the particular sampling patterns given by a RMBL, its homogeneity even improves that of an equivalent RSBL.
Open AccessAnalysis of 3D Scan Measurement Distribution with Application to a Multi-Beam Lidar on a Rotating Platform
Multi-beam lidar (MBL) rangefinders are becoming increasingly compact, light, and accessible 3D sensors, but they offer limited vertical resolution and field of view. The addition of a degree-of-freedom to build a rotating multi-beam lidar (RMBL) has the potential to become a common solution for affordable rapid full-3D high resolution scans. However, the overlapping of multiple-beams caused by rotation yields scanning patterns that are more complex than in rotating single beam lidar (RSBL). In this paper, we propose a simulation-based methodology to analyze 3D scanning patterns which is applied to investigate the scan measurement distribution produced by the RMBL configuration. With this purpose, novel contributions include: (i) the adaption of a recent spherical reformulation of Ripley’s K function to assess 3D sensor data distribution on a hollow sphere simulation; (ii) a comparison, both qualitative and quantitative, between scan patterns produced by an ideal RMBL based on a Velodyne VLP-16 (Puck) and those of other 3D scan alternatives (i.e., rotating 2D lidar and MBL); and (iii) a new RMBL implementation consisting of a portable tilting platform for VLP-16 scanners, which is presented as a case study for measurement distribution analysis as well as for the discussion of actual scans from representative environments. Results indicate that despite the particular sampling patterns given by a RMBL, its homogeneity even improves that of an equivalent RSBL.
- Open Access
- 1 January 2015
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 41, 506-520
LED bulbs technical specification and testing procedure for solar home systems
- 1 January 2015
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 41, 506-520
Open AccessLED bulbs technical specification and testing procedure for solar home systems
- 1 November 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1553572X,p. 4168-4173
Improving 3D scan matching time of the coarse binary cubes method with fast spatial subsampling
Exploiting the huge amount of real time range data provided by new multi-beam three-dimensional (3D) laser scanners is challenging for vehicle and mobile robot applications. The Coarse Binary Cube (CBC) method was proposed to achieve fast and accurate scene registration by maximizing the number of coincident cubes between a pair of scans. The aim of this paper is speeding up CBC with a fast spatial subsampling strategy for raw point clouds that employs the same type of efficient data structures as CBC. Experimental results have been obtained with the Velodyne HDL-32E sensor mounted on the Quadriga mobile robot on irregular terrain. The influence of the subsampling rate has been analyzed. Preliminary results show a relevant gain in computation time without losing matching accuracy.
- 1 November 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1553572X,p. 4168-4173
Improving 3D scan matching time of the coarse binary cubes method with fast spatial subsampling
Exploiting the huge amount of real time range data provided by new multi-beam three-dimensional (3D) laser scanners is challenging for vehicle and mobile robot applications. The Coarse Binary Cube (CBC) method was proposed to achieve fast and accurate scene registration by maximizing the number of coincident cubes between a pair of scans. The aim of this paper is speeding up CBC with a fast spatial subsampling strategy for raw point clouds that employs the same type of efficient data structures as CBC. Experimental results have been obtained with the Velodyne HDL-32E sensor mounted on the Quadriga mobile robot on irregular terrain. The influence of the subsampling rate has been analyzed. Preliminary results show a relevant gain in computation time without losing matching accuracy.
- 9 July 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 61 (7) , 3638-3647
Automation of the Arm-Aided Climbing Maneuver for Tracked Mobile Manipulators
Surmounting terrain elevations, such as terraces, is useful to increase the reach of mobile robots operating in disaster areas, construction sites, and natural environments. This paper proposes an autonomous climbing maneuver for tracked mobile manipulators with the help of the onboard arm. The solution includes a fast 3-D scan processing method to estimate a simple set of geometric features for the ascent: three lines that correspond to the low and high edges, and the maximum inclination axis. Furthermore, terraces are classified depending on whether they are reachable through a slope or an abrupt step. In the proposed maneuver, the arm is employed both for shifting the center of gravity of the robot and as an extra limb that can be pushed against the ground. Feedback during climbing can be obtained through an inertial measurement unit, joint absolute encoders, and pressure sensors. Experimental results are presented for terraces of both kinds on rough terrain with the hydraulic mobile manipulator Alacrane.
- 9 July 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 61 (7) , 3638-3647
Automation of the Arm-Aided Climbing Maneuver for Tracked Mobile Manipulators
Surmounting terrain elevations, such as terraces, is useful to increase the reach of mobile robots operating in disaster areas, construction sites, and natural environments. This paper proposes an autonomous climbing maneuver for tracked mobile manipulators with the help of the onboard arm. The solution includes a fast 3-D scan processing method to estimate a simple set of geometric features for the ascent: three lines that correspond to the low and high edges, and the maximum inclination axis. Furthermore, terraces are classified depending on whether they are reachable through a slope or an abrupt step. In the proposed maneuver, the arm is employed both for shifting the center of gravity of the robot and as an extra limb that can be pushed against the ground. Feedback during climbing can be obtained through an inertial measurement unit, joint absolute encoders, and pressure sensors. Experimental results are presented for terraces of both kinds on rough terrain with the hydraulic mobile manipulator Alacrane.
- 1 March 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19436572,p. 1-6
Terrace climbing of the Alacrane mobile robot with cooperation of its onboard arm
Alacrane is a hydraulic mobile manipulator for search and rescue in disaster areas and natural environments, where surmounting elevations such as rubble mounds and terraces is usually required. The paper describes the autonomous terrace climbing maneuver of this mobile robot with the help of its powerful arm. During this operation, the arm is used both for levering, by pushing it against the ground, and for modifying the center of gravity of the entire robot. A 3D laser scanner, an IMU, and joint absolute encoders provide all the sensorial information required for this maneuver. Furthermore, fast 3D scan processing is proposed to estimate the pose, slope, and and height of the terrace. Experimental results in an outdoor environment demonstrate the utility of the proposed approach.
- 1 March 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19436572,p. 1-6
Terrace climbing of the Alacrane mobile robot with cooperation of its onboard arm
Alacrane is a hydraulic mobile manipulator for search and rescue in disaster areas and natural environments, where surmounting elevations such as rubble mounds and terraces is usually required. The paper describes the autonomous terrace climbing maneuver of this mobile robot with the help of its powerful arm. During this operation, the arm is used both for levering, by pushing it against the ground, and for modifying the center of gravity of the entire robot. A 3D laser scanner, an IMU, and joint absolute encoders provide all the sensorial information required for this maneuver. Furthermore, fast 3D scan processing is proposed to estimate the pose, slope, and and height of the terrace. Experimental results in an outdoor environment demonstrate the utility of the proposed approach.