DKDarren F. Kavanagh

Darren F. Kavanagh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Darren F. Kavanagh has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Cold Plasma Deposition of Tobramycin as an Approach to Localized Antibiotic Delivery to Combat Biofilm Formation

    by Beatrice Olayiwola, Fiona O’neill, Chloe Frewen, Darren F. Kavanagh, Rosemary O’hara, Liam O’neill

    Hospital-acquired infections (HAIs) remain a significant factor in hospitals, with implant surfaces often becoming contaminated by highly resistant strains of bacteria. Recent studies have shown that electrical plasma discharges can reduce bacterial load on surfaces, and this approach may help augment traditional antibiotic treatments. To investigate this, a cold atmospheric plasma was used to deposit tobramycin sulphate onto various surfaces, and the bacterial growth rate of K. pneumoniae in its planktonic and biofilm form was observed to probe the interactions between the plasma discharge and the antibiotic and to determine if there were any synergistic effects on the growth rate. The plasma-deposited tobramycin was still active after passing through the plasma field and being deposited onto titanium or polystyrene. This led to the significant inhibition of K. pneumoniae, with predictable antibiotic dose dependence. Separate studies have shown that the plasma treatment of the biofilm had a weak antimicrobial effect and reduced the amount of biofilm by around 50%. Combining a plasma pre-treatment on exposed biofilm followed by deposited tobramycin application proved to be somewhat effective in further reducing biofilm growth. The plasma discharge pre-treatment produced a further reduction in the biofilm load beyond that expected from just the antibiotic alone. However, the effect was not additive, and the results suggest that a complex interaction between plasma and antibiotic may be at play, with increasing plasma power producing a non-linear effect. This study may contribute to the treatment of infected surgical sites, with the coating of biomaterial surfaces with antibiotics reducing overall antibiotic use through the targeted delivery of therapeutics.


  • Open Access

    Low Complexity Non-Linear Spectral Features and Wear State Models for Remaining Useful Life Estimation of Bearings

    by Eoghan T. Chelmiah, Violeta I. McLoone, Darren F. Kavanagh

    Improving the reliability and performance of electric and rotating machines is crucial to many industrial applications. This will lead to improved robustness, efficiency, and eco-sustainability, as well as mitigate significant health and safety concerns regarding sudden catastrophic failure modes. Bearing degradation is the most significant cause of machine failure and has been reported to cause up to 75% of low-voltage machine failures. This paper introduces a low complexity machine learning (ML) approach to estimate the remaining useful life (RUL) of rolling element bearings using real vibration signals. This work explores different ML recipes using novel feature engineering coupled with various k-Nearest Neighbour (k-NN), and Support Vector Machines (SVM) kernel and weighting functions in order to optimise this RUL approach. Original non-linear wear state models and feature sets are investigated, the latter are derived from Short-time Fourier Transform (STFT) and Hilbert Marginal Spectrum (HMS). These feature sets incorporate one-third octave band filtering for low complexity multivariate feature subspace compression. Our proposed ML algorithm stage has employed two robust supervised ML approaches: weighted k-NN and SVM. Real vibration data were drawn from the Pronostia platform to test and validate this prognostic monitoring approach. The results clearly demonstrate the effectiveness of this approach, with classification accuracy results of up to 82.8% achieved. This work contributes to the field by introducing a robust and computationally inexpensive method for accurate monitoring of machine health using low-cost vibration-based sensing.


  • Open Access

    A Coaxial Pulsed Plasma Thruster Model with Efficient Flyback Converter Approaches for Small Satellites

    by Dillon O’reilly, Georg Herdrich, Felix Schäfer, Christoph Montag, Simon P. Worden, Peter Meaney, Darren F. Kavanagh

    Pulsed plasma thrusters (PPT) have demonstrated enormous potential since the 1960s. One major shortcoming is their low thrust efficiency, typically <30%. Most of these losses are due to joule heating, while some can be attributed to poor efficiency of the power processing units (PPUs). We model PPTs to improve their efficiency, by exploring the use of power electronic topologies to enhance the power conversion efficiency from the DC source to the thruster head. Different control approaches are considered, starting off with the basic approach of a fixed frequency flyback converter. Then, the more advanced critical conduction mode (CrCM) flyback, as well as other optimized solutions using commercial off-the-shelf (COTS) components, are presented. Variations of these flyback converters are studied under different control regimes, such as zero voltage switching (ZVS), valley voltage switching (VVS), and hard switched, to enhance the performance and efficiency of the PPU. We compare the max voltage, charge time, and the overall power conversion efficiency for different operating regimes. Our analytical results show that a more dynamic control regime can result in fewer losses and enhanced performance, offering an improved power conversion efficiency for PPUs used with PPTs. An efficiency of 86% was achieved using the variable frequency approach. This work has narrowed the possible PPU options through analytical analysis and has therefore identified a strategic approach for future investigations. In addition, a new low-power coaxial micro-thruster model using equivalent circuit model elements is developed.This is referred to as the Carlow–Stuttgart model and has been validated against experimental data from vacuum chamber tests in Stuttgart’s Pulsed Plasma Laboratory. This work serves as a valuable precursor towards the implementation of highly optimized PPU designs for efficient PPT thrusters for the next PETRUS (pulsed electrothermal thruster for the University of Stuttgart) missions.


  • Open Access

    Remaining Useful Life Estimation of Rotating Machines through Supervised Learning with Non-Linear Approaches

    by Eoghan T. Chelmiah, Violeta I. McLoone, Darren F. Kavanagh

    Bearings are one of the most common causes of failure for rotating electric machines. Intelligent condition-based monitoring (CbM) can be used to predict rolling element bearing fault modes using non-invasive and inexpensive sensing. Strategically placed accelerometers can acquire bearing vibration signals, which contain salient prognostic information regarding the state of health. Machine learning (ML) algorithms are currently being investigated to accurately predict the health of machines and equipment in real time. This is highly advantageous towards reducing unscheduled maintenance, increasing the operational lifetime, as well as mitigation of the associated health risks caused by catastrophic machine failure. Motivated by this, a robust CbM system is presented for rotating machines that is suitable for various industrial applications. Novel non-linear methods for both feature engineering (one-third octave bands) and wear-state modelling (exponential) are investigated. The paper compares two main types of feature extraction, which are derived from Short-Time Fourier Transform (STFT) and Envelope Analysis (EA). In addition, two types of supervised learning, Support Vector Machines (SVM) and k-Nearest Neighbour (k-NN) are explored. The work is tested and validated on the PRONOSTIA platform dataset, with remaining useful life (RUL) classification results of up to 74.3% and a mean absolute error of 0.08 achieved.


  • Top Cited Papers
    Open Access

    Electric Propulsion Methods for Small Satellites: A Review

    by Dillon O’reilly, Georg Herdrich, Darren F. Kavanagh

    Over 2500 active satellites are in orbit as of October 2020, with an increase of ~1000 smallsats in the past two years. Since 2012, over 1700 smallsats have been launched into orbit. It is projected that by 2025, there will be 1000 smallsats launched per year. Currently, these satellites do not have sufficient delta v capabilities for missions beyond Earth orbit. They are confined to their pre-selected orbit and in most cases, they cannot avoid collisions. Propulsion systems on smallsats provide orbital manoeuvring, station keeping, collision avoidance and safer de-orbit strategies. In return, this enables longer duration, higher functionality missions beyond Earth orbit. This article has reviewed electrostatic, electrothermal and electromagnetic propulsion methods based on state of the art research and the current knowledge base. Performance metrics by which these space propulsion systems can be evaluated are presented. The article outlines some of the existing limitations and shortcomings of current electric propulsion thruster systems and technologies. Moreover, the discussion contributes to the discourse by identifying potential research avenues to improve and advance electric propulsion systems for smallsats. The article has placed emphasis on space propulsion systems that are electric and enable interplanetary missions, while alternative approaches to propulsion have also received attention in the text, including light sails and nuclear electric propulsion amongst others.


  • Open Access

    Thermal Degradation Phenomena of Polymer Film on Magnet Wire for Electromagnetic Coils

    by Darren F. Kavanagh, Konstantinos N. Gyftakis, Malcolm D. McCulloch

    Polymer film insulation degradation is a major problem for electric machines which leads to short circuits, overheating, and eventually the occurrence of catastrophic failure. Electrical insulation materials provide the vital function of turn-to-turn, phase-to-phase, and phase-to-ground electrical isolation for the electromagnetic coils and windings. This article investigates the characterization of early-onset degradation of thin-film magnet wire insulation at elevated temperatures from 200 to 275 °C. Sample specimens were analyzed after ageing for 100 h in terms of their physical properties (surface roughness, mass), chemical properties [Fourier transform infrared (FTIR) spectroscopy], dielectric properties (capacitance and dissipation factor), and electrical properties (voltage breakdown strength and resistance). The results show that the specimen roughness and mass increase and decrease uniformly, respectively, with increased ageing temperature. Similar degradation results trends with respect to ageing temperature for the dielectric properties and electrical insulation strength is documented. The article also reports an extended ageing study which investigates early breakdown voltage on sample specimens over a much longer time duration, that of up to 1600 h.


  • Early-onset Degradation of Thin-film Magnet Wire Insulation for Electromechanical Energy Converters

    by Darren F. Kavanagh, Konstantinos N. Gyftakis, Malcolm D. McCulloch

    One of the predominant fault modes of electric machines is insulation failure which may lead to short circuits and catastrophic failure. Electrical insulation materials provide the vital function of turn-to-turn, phase to phase, and phase-to-ground electrical isolation for the electromagnetic coils and circuits. This paper investigates the characterisation of early-onset degradation of thin-film magnet wire insulation at elevated temperatures from 200 to 275 °C. Sample specimens were analysed after ageing for 100 hours in terms of their physical properties (surface roughness, mass), chemical properties (Fourier Transform Infra-Red (FTIR) spectroscopy), dielectric properties (capacitance, dissipation factor and impedance) and electrical properties (voltage breakdown strength and resistance). The roughness and mass increase and decrease fairly uniformly, respectively, as might be expected, with increased ageing temperature. The dielectric and electrical properties, however, do not change uniformly with ageing temperature and the results here appear not to conform to the commonly accepted Arrhenius law for insulation lifetime versus temperature. Instead we find that for slightly elevated temperatures (200 and 215 ◦ C) the breakdown voltage performance is significantly worse than the unaged insulation, but this improves at 230–260 ◦ C, and then finally drops to the lowest value at 275 °C. It is unclear exactly why this is the case, but we hypothesize that it could be related to build up of thermo-mechanical stress in the polymer layers which is not relaxed at the lower ageing temperatures.


  • The Impact of Thermal Degradation on Properties of Electrical Machine Winding Insulation Material

    by Malgorzata Sumislawska, Konstantinos N. Gyftakis, Darren F. Kavanagh, Malcolm D. McCulloch, Keith J. Burnham, David A. Howey

    Interturn stator short circuits can develop quickly leading to serious damage of an electric machine. However, degradation mechanisms of winding insulation material are not yet fully understood. Therefore, the main contribution of this paper is the analysis of the impact of thermal ageing on the electrical properties of the thin-film winding insulation. The insulation samples have been aged thermally at 200 °C-275 °C and for 100-1600 h. After ageing, impedance spectroscopy measurements were undertaken on the samples and equivalent-circuit model (ECM) parameters fitted for each measurement. This allows the impact of thermal ageing on ECM parameters to be analyzed, giving insight into the changes in the electrical properties of the insulation. Finally, high voltage was applied to the samples aiming to identify the breakdown-voltage (BV) characteristics of the insulation material.


  • Dielectric Characteristics of Electric Vehicle Traction Motor Winding Insulation under Thermal Ageing

    by Konstantinos N. Gyftakis, Malgorzata Sumislawska, Darren F. Kavanagh, David A. Howey, Malcolm D. McCulloch

    The electric motor is the heart of the electric vehicle. It is crucial that any occurring faults are detected promptly so that a catastrophic failure is avoided. At the same time, deep knowledge of the degradation mechanisms is required to allow maximum performance at minimum cost. This paper focuses on this balance. Statistical results from measurements of unaged and accelerated aged winding insulation samples provide information about the degradation processes, enabling steps toward a reliable prognosis model of the motor's remaining life.