Puput Dani Prasetyo Adi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Puput Dani Prasetyo Adi has a total of 177 co-authors. Here are the top co-authors by number of shared publications:
Akio Kitagawa
11 shared publications- Fairuz Iqbal Maulana
Bina Nusantara University
6 shared publications Rizky Rahmatullah
6 shared publications- Dian Lestari
Universitas Airlangga
5 shared publications Yuyu Wahyu
National Research and Innovation Agency (BRIN), Jakarta, Indonesia
5 shared publications- Agung Purnomo
Bina Nusantara University
4 shared publications
Latest Publications
- Open Access
- 1 December 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Informatics and Communication Technology (IJ-ICT)
- Vol. 15 (4) , 1929-1943
Adaptive weighted multi-criteria decision making using modified dijkstra’s algorithm: integrating real-time traffic conditions with hybrid WSM-WPM for dynamic route optimization
Traffic congestion is a problem that needs to be solved. A smart route optimization system is needed to overcome this problem, not only using traditional methods but also using algorithms that have the ability to find the shortest route. This study proposes a framework system for multi-criteria decision making that adapts and improves the Dijkstra and weighted product method (WPM) algorithms. The Dijkstra algorithm is modified to be more integrated in solving the fastest travel route, anticipating traffic congestion, improving road safety, saving fuel, and providing real-time data. The weighted sum method (WSM)-WPM hybrid framework has the advantage of WSM additive normalization with the zero-dimensional properties of WPM to overcome different measurement units. Experimental results show a significant reduction in travel time and fuel consumption, as well as an increase in route safety percentage. This system maintains computational efficiency, and this research provides a practical and scalable solution for intelligent transportation systems (ITS), improving the driver experience and overall traffic network safety. The results of the congestion avoidance configuration with the highest hybrid score show a result of 0.4573, yielding a viable alternative route, namely (V1→V3→V6→V9→V12→V14).
- 1 December 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Informatics and Communication Technology (IJ-ICT)
- Vol. 15 (4) , 1929-1943
Open AccessAdaptive weighted multi-criteria decision making using modified dijkstra’s algorithm: integrating real-time traffic conditions with hybrid WSM-WPM for dynamic route optimization
Traffic congestion is a problem that needs to be solved. A smart route optimization system is needed to overcome this problem, not only using traditional methods but also using algorithms that have the ability to find the shortest route. This study proposes a framework system for multi-criteria decision making that adapts and improves the Dijkstra and weighted product method (WPM) algorithms. The Dijkstra algorithm is modified to be more integrated in solving the fastest travel route, anticipating traffic congestion, improving road safety, saving fuel, and providing real-time data. The weighted sum method (WSM)-WPM hybrid framework has the advantage of WSM additive normalization with the zero-dimensional properties of WPM to overcome different measurement units. Experimental results show a significant reduction in travel time and fuel consumption, as well as an increase in route safety percentage. This system maintains computational efficiency, and this research provides a practical and scalable solution for intelligent transportation systems (ITS), improving the driver experience and overall traffic network safety. The results of the congestion avoidance configuration with the highest hybrid score show a result of 0.4573, yielding a viable alternative route, namely (V1→V3→V6→V9→V12→V14).
- Open Access
- 1 June 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (3) , 2611-2624
Feature extraction and machine learning methods for biometric recognition based on fusion of ECG and fingerprint
This research introduces a multimodal biometric authentication framework by amalgamating electrocardiogram (ECG) and fingerprint modalities through the utilization of diverse feature extraction methodologies and machine learning classifiers. The proposed methodology aspires to augment precision and mitigate spoofing vulnerabilities in contrast to traditional single-modality systems. Among the feature extraction techniques assessed—grayscale, binary, Sobel edge detection, and minutiae—Naïve Bayes (NB) in conjunction with minutiae features exhibited superior performance, attaining an accuracy rate of 96.25%. Supplementary experiments employing random forest (RF) and support vector machine (SVM) also revealed commendable classification efficacy, underscoring the robustness of the fusion methodology. This investigation provides a pragmatic and secure biometric framework by harnessing complementary biometric characteristics to enhance authentication dependability. The proposed system presents promising applications in real-world contexts, particularly concerning mobile security and healthcare access control. Future research endeavors will tackle challenges associated with ECG signal variability, computational efficiency, and extensive deployment.
- 1 June 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (3) , 2611-2624
Open AccessFeature extraction and machine learning methods for biometric recognition based on fusion of ECG and fingerprint
This research introduces a multimodal biometric authentication framework by amalgamating electrocardiogram (ECG) and fingerprint modalities through the utilization of diverse feature extraction methodologies and machine learning classifiers. The proposed methodology aspires to augment precision and mitigate spoofing vulnerabilities in contrast to traditional single-modality systems. Among the feature extraction techniques assessed—grayscale, binary, Sobel edge detection, and minutiae—Naïve Bayes (NB) in conjunction with minutiae features exhibited superior performance, attaining an accuracy rate of 96.25%. Supplementary experiments employing random forest (RF) and support vector machine (SVM) also revealed commendable classification efficacy, underscoring the robustness of the fusion methodology. This investigation provides a pragmatic and secure biometric framework by harnessing complementary biometric characteristics to enhance authentication dependability. The proposed system presents promising applications in real-world contexts, particularly concerning mobile security and healthcare access control. Future research endeavors will tackle challenges associated with ECG signal variability, computational efficiency, and extensive deployment.
- Open Access
- 20 April 2026
- Published by Universitas Muslim Indonesia in ILKOM Jurnal Ilmiah
- Vol. 18 (1)
An Exploration of the Work Performance of Educators in Transformative Schools: Leveraging Machine Learning for Performance Insights
Education has gone through various phases, and entered the transformative school mode which can be said to change the existing order of the previous schooling system or procedures, because many modes can be done in the transformative school, students can learn in school buildings or classes, or in the field or real industry or the real world of work, with the introduction of a wider and more complex world, this is one of them. This research tries to create and analyze transformative schools in 3 algorithms, namely regression algorithms, classification algorithms, and clustering algorithms that provide a detailed analysis of the results of the analysis of transformative schools currently promoted by the government. from the results of the analysis raises performance conclusions, and in this phase a conclusion can be drawn whether the Transformative school is able to provide answers about the performance of teachers, students, teacher education levels, school locations, number of students, learning methods, or any paramaters that can provide detailed and detailed answers to get performance analysis from Machine Learning, and Work Performance of teachers in Transformative schools with precision. Quantitatively, the value of performance is determined by innovation by 43.2%, followed by technological capabilities and collaboration, 27.9% and 17.2% respectively. and based on cluster level, cluster 3 is the best with 118 educators, cluster 0, 127 educators with high innovators, and cluster 2, 126 educators, and cluster 1 with 129 educators. and from the paradox of transformative practices 30.6% are high Adopters
- 20 April 2026
- Published by Universitas Muslim Indonesia in ILKOM Jurnal Ilmiah
- Vol. 18 (1)
Open AccessAn Exploration of the Work Performance of Educators in Transformative Schools: Leveraging Machine Learning for Performance Insights
Education has gone through various phases, and entered the transformative school mode which can be said to change the existing order of the previous schooling system or procedures, because many modes can be done in the transformative school, students can learn in school buildings or classes, or in the field or real industry or the real world of work, with the introduction of a wider and more complex world, this is one of them. This research tries to create and analyze transformative schools in 3 algorithms, namely regression algorithms, classification algorithms, and clustering algorithms that provide a detailed analysis of the results of the analysis of transformative schools currently promoted by the government. from the results of the analysis raises performance conclusions, and in this phase a conclusion can be drawn whether the Transformative school is able to provide answers about the performance of teachers, students, teacher education levels, school locations, number of students, learning methods, or any paramaters that can provide detailed and detailed answers to get performance analysis from Machine Learning, and Work Performance of teachers in Transformative schools with precision. Quantitatively, the value of performance is determined by innovation by 43.2%, followed by technological capabilities and collaboration, 27.9% and 17.2% respectively. and based on cluster level, cluster 3 is the best with 118 educators, cluster 0, 127 educators with high innovators, and cluster 2, 126 educators, and cluster 1 with 129 educators. and from the paradox of transformative practices 30.6% are high Adopters
- Open Access
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 40 (3)
Quality of services LoRaWAN satellite communication
This research discusses research that focuses on the capabilities of satellitebased LoRa, for satellite positions orbiting in low earth orbit (LEO). The expectation of low power wide area network (LPWAN) satellite can find the quality of transmitting data using LoRaWAN which is part of LPWAN and can provide quality of service (QoS) with high-quality real-time sensor data, low latency, long-range, low-power, no attenuation signal, no problem with obstacles in terrestrial areas, and other benefits that can be widely optimized. This article uses a comprehensive analysis of mathematical calculations as well as precise and accurate simulations for the actual development of satellite-based LPWAN. The satellite-based IoT is unlimited in terms of distance, to provide good services to all IoT users in the world. The comparison with terrestrial measurements is analyzed in detail, especially the signal attenuation factor that causes a lot of signal loss and data is not well received. Several methods are used to help reduce collision data, such as adaptive data rate (ADR) which can reduce collisions by 30%.
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 40 (3)
Open AccessQuality of services LoRaWAN satellite communication
This research discusses research that focuses on the capabilities of satellitebased LoRa, for satellite positions orbiting in low earth orbit (LEO). The expectation of low power wide area network (LPWAN) satellite can find the quality of transmitting data using LoRaWAN which is part of LPWAN and can provide quality of service (QoS) with high-quality real-time sensor data, low latency, long-range, low-power, no attenuation signal, no problem with obstacles in terrestrial areas, and other benefits that can be widely optimized. This article uses a comprehensive analysis of mathematical calculations as well as precise and accurate simulations for the actual development of satellite-based LPWAN. The satellite-based IoT is unlimited in terms of distance, to provide good services to all IoT users in the world. The comparison with terrestrial measurements is analyzed in detail, especially the signal attenuation factor that causes a lot of signal loss and data is not well received. Several methods are used to help reduce collision data, such as adaptive data rate (ADR) which can reduce collisions by 30%.
- 11 October 2025
- Published by ASCEE Publications in Internet of Things and Artificial Intelligence Journal
- Vol. 5 (4) , 1106-1116
A Comprehensive Analysis of Real-Time River Water Quality Monitoring in Bandung City Using LoRaWAN
The installation of a device or prototype for detecting river water quality is the objective of this research, so strict and precise management is required. During the rainy season, the device must be extremely accurate, waterproof, and resistant to damage and rust. This is the strategy that this research aims to develop. During the installation of the prototype, it is carried out outdoors with the appropriate mechanism, and the sensors have also undergone the appropriate calibration process. The sensors used include Dissolved Oxygen (DO), Turbidity, Temperature, pH water sensors, and other specific sensors that are suitable for monitoring river water quality. The telecommunications device used is LoRaWAN, which is considered capable because it can transmit data as far as 15 km on a line of sight, while in urban areas, it is a maximum of 5 km. In addition to its range, LoRa is also low power, at around 100 mW on the transmitter power and less than 20 mW when the transmitter is not sending data. Furthermore, LoRaWAN is known for its low cost, making it suitable for non-infrastructure projects that can be easily installed or dismantled without the need for complex infrastructure development.
- 11 October 2025
- Published by ASCEE Publications in Internet of Things and Artificial Intelligence Journal
- Vol. 5 (4) , 1106-1116
A Comprehensive Analysis of Real-Time River Water Quality Monitoring in Bandung City Using LoRaWAN
The installation of a device or prototype for detecting river water quality is the objective of this research, so strict and precise management is required. During the rainy season, the device must be extremely accurate, waterproof, and resistant to damage and rust. This is the strategy that this research aims to develop. During the installation of the prototype, it is carried out outdoors with the appropriate mechanism, and the sensors have also undergone the appropriate calibration process. The sensors used include Dissolved Oxygen (DO), Turbidity, Temperature, pH water sensors, and other specific sensors that are suitable for monitoring river water quality. The telecommunications device used is LoRaWAN, which is considered capable because it can transmit data as far as 15 km on a line of sight, while in urban areas, it is a maximum of 5 km. In addition to its range, LoRa is also low power, at around 100 mW on the transmitter power and less than 20 mW when the transmitter is not sending data. Furthermore, LoRaWAN is known for its low cost, making it suitable for non-infrastructure projects that can be easily installed or dismantled without the need for complex infrastructure development.
- Open Access
- 1 May 2025
- Published by KEAI Publishing in Aquaculture and Fisheries
- Vol. 10 (3) , 372-381
The potential contribution of Indonesian fishing vessels in reducing Green House gas emission
In common practices, fishing vessels' Greenhouse Gas (GHG) emission is a part of the energy sector. Annual series data show Indonesian fishing vessels are growing by more than 18,000 units/year, dominated by fishing vessels with a tonnage of less than 30 GT. A ′bottom-up' approach was applied to develop low-carbon fishing activity practices to contribute to GHG emission reduction. This study focuses on a GHG inventory of fishing vessels managed by local and central Governments, using data from fishing permits and vessel monitoring systems from 2010 to 2018. The result is expected to act as the baseline for estimating emissions of fishing vessels up to 2030. The model predicted it could be reduced in 2030 by up to 6.43 E+07 tons CO2eq (68%) for fishing vessels with a size of less than 30 GT and up to 5.80E+06 tons CO2eq (84.5%) for a larger size of fishing vessels, respectively. To achieve further mitigation targets, mixing diesel oil using 30% biodiesel should be implemented progressively by 10% annually from 2021. Concerning fisher welfare after 2015, it shows a positive trend along with energy efficiency, and it can be concluded that strategies to improve the energy efficiency of active fishing vessels should be considered urgent.
- 1 May 2025
- Published by KEAI Publishing in Aquaculture and Fisheries
- Vol. 10 (3) , 372-381
Open AccessThe potential contribution of Indonesian fishing vessels in reducing Green House gas emission
In common practices, fishing vessels' Greenhouse Gas (GHG) emission is a part of the energy sector. Annual series data show Indonesian fishing vessels are growing by more than 18,000 units/year, dominated by fishing vessels with a tonnage of less than 30 GT. A ′bottom-up' approach was applied to develop low-carbon fishing activity practices to contribute to GHG emission reduction. This study focuses on a GHG inventory of fishing vessels managed by local and central Governments, using data from fishing permits and vessel monitoring systems from 2010 to 2018. The result is expected to act as the baseline for estimating emissions of fishing vessels up to 2030. The model predicted it could be reduced in 2030 by up to 6.43 E+07 tons CO2eq (68%) for fishing vessels with a size of less than 30 GT and up to 5.80E+06 tons CO2eq (84.5%) for a larger size of fishing vessels, respectively. To achieve further mitigation targets, mixing diesel oil using 30% biodiesel should be implemented progressively by 10% annually from 2021. Concerning fisher welfare after 2015, it shows a positive trend along with energy efficiency, and it can be concluded that strategies to improve the energy efficiency of active fishing vessels should be considered urgent.
- Open Access
- 27 February 2025
- Published by Universitas AMIKOM Purwokerto in Telematika
- Vol. 18 (1) , 1-12
Comparative Analysis of Distance Metrics in KNN and SMOTE Algorithms for Software Defect Prediction
As the complexity and scale of projects increase, new challenges arise related to handling software defects. One solution uses machine learning-based software defect prediction techniques, such as the K-Nearest Neighbors (KNN) algorithm. However, KNN’s performance can be hindered by the majority vote mechanism and the distance/similarity metric choice, especially when applied to imbalanced datasets. This research compares the effectiveness of Euclidean, Hamming, Cosine, and Canberra distance metrics on KNN performance, both before and after the application of SMOTE (Synthetic Minority Over-sampling Technique). Results show significant improvements in the AUC and F-1 measure values across various datasets after the SMOTE application. Following the SMOTE application, Euclidean distance produced an AUC of 0.7752 and an F1 of 0.7311 for the EQ dataset. With Canberra distance and SMOTE, the JDT dataset produced an AUC of 0.7707 and an F-1 of 0.6342. The LC dataset improved to 0.6752 and 0.3733 in tandem with the ML dataset, which climbed to 0.6845 and 0.4261 with Canberra distance. Lastly, after using SMOTE, the PDE dataset improved to 0.6580 and 0.3957 with Canberra distance. The findings confirm that SMOTE, combined with suitable distance metrics, significantly boosts KNN’s prediction accuracy, with a P-value of 0.0001.
- 27 February 2025
- Published by Universitas AMIKOM Purwokerto in Telematika
- Vol. 18 (1) , 1-12
Open AccessComparative Analysis of Distance Metrics in KNN and SMOTE Algorithms for Software Defect Prediction
As the complexity and scale of projects increase, new challenges arise related to handling software defects. One solution uses machine learning-based software defect prediction techniques, such as the K-Nearest Neighbors (KNN) algorithm. However, KNN’s performance can be hindered by the majority vote mechanism and the distance/similarity metric choice, especially when applied to imbalanced datasets. This research compares the effectiveness of Euclidean, Hamming, Cosine, and Canberra distance metrics on KNN performance, both before and after the application of SMOTE (Synthetic Minority Over-sampling Technique). Results show significant improvements in the AUC and F-1 measure values across various datasets after the SMOTE application. Following the SMOTE application, Euclidean distance produced an AUC of 0.7752 and an F1 of 0.7311 for the EQ dataset. With Canberra distance and SMOTE, the JDT dataset produced an AUC of 0.7707 and an F-1 of 0.6342. The LC dataset improved to 0.6752 and 0.3733 in tandem with the ML dataset, which climbed to 0.6845 and 0.4261 with Canberra distance. Lastly, after using SMOTE, the PDE dataset improved to 0.6580 and 0.3957 with Canberra distance. The findings confirm that SMOTE, combined with suitable distance metrics, significantly boosts KNN’s prediction accuracy, with a P-value of 0.0001.
- Open Access
- 1 February 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 37 (2) , 903-912
SRCNN-based image transmission for autonomous vehicles in limited network areas
High-quality images are crucial for navigation, obstacle detection, and environmental understanding, but transmitting high-resolution images over constrained networks presents significant challenges. This study introduces an image transmission system using super-resolution convolutional neural networks (SRCNN) to enhance image quality without increasing bandwidth requirements by transmitting low-resolution images and upscaling them with SRCNN. The first phase of the research involved data collection, in which information was acquired directly from an appropriate locus to produce training, validation, and testing datasets. The second, three SRCNN models (915, 935, and 955) were trained using such a training dataset. The last was an evaluation, in which model 915 showed quick learning and stable performance with initial high loss, while model 935 had rapid convergence but potential overfitting. Model 955 achieved high initial performance. Three SRCNN model configurations were tailored to the specific needs of autonomous electric vehicles operating in limited areas, such as the locus. Input image resolution ranged from 128×128 pixels to 256×256 pixels, while output resolution varied from 256×256 pixels to 512×512 pixels. These resolutions can be acceptable for efficient image transmission over IEEE 802.11ac, but on the long range (LoRa) network, it still produces some delay.
- 1 February 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 37 (2) , 903-912
Open AccessSRCNN-based image transmission for autonomous vehicles in limited network areas
High-quality images are crucial for navigation, obstacle detection, and environmental understanding, but transmitting high-resolution images over constrained networks presents significant challenges. This study introduces an image transmission system using super-resolution convolutional neural networks (SRCNN) to enhance image quality without increasing bandwidth requirements by transmitting low-resolution images and upscaling them with SRCNN. The first phase of the research involved data collection, in which information was acquired directly from an appropriate locus to produce training, validation, and testing datasets. The second, three SRCNN models (915, 935, and 955) were trained using such a training dataset. The last was an evaluation, in which model 915 showed quick learning and stable performance with initial high loss, while model 935 had rapid convergence but potential overfitting. Model 955 achieved high initial performance. Three SRCNN model configurations were tailored to the specific needs of autonomous electric vehicles operating in limited areas, such as the locus. Input image resolution ranged from 128×128 pixels to 256×256 pixels, while output resolution varied from 256×256 pixels to 512×512 pixels. These resolutions can be acceptable for efficient image transmission over IEEE 802.11ac, but on the long range (LoRa) network, it still produces some delay.
- Open Access
- 12 December 2024
- Published by Universitas Muslim Indonesia in ILKOM Jurnal Ilmiah
- Vol. 16 (3) , 255-270
Performance Analysis of LoRaWAN Communication Utilizing the RFM96 Module
This research discusses the utilization of LoRa and LoRaWAN or Low Power Wide Area (LPWA) and Low Power Wide Area Network (LPWAN). In this study, the application server is utilized using Telkom IoT. In its utilization, Telkom IoT can provide comprehensive results regarding LoRa quality of service capabilities such as bit rate, latency, and longitude and latitude data. Terrestrial measurements conduct tests in different areas with different conditions that cause different data obstruction, with several LoRa end-node points transmitting data with low bit-rate. For example, heart rate data. Some other parameters are the spreading factor (SF) and power consumption. Some parameters that determine the quality of transmitting data include the Spreading Factor and the Bandwidth used. From the analysis dan Experiment results, the Delay (ms) generated from measurements using RFM96 LoRa for IoT is around 0.02 seconds or 20 ms to around 0.05 seconds or 50 ms, and sometimes it can reach 0.07 ms to 0.09 ms. RSSI and SNR show the quality of the signal obtained which will provide a Quality of Service (QoS) value. From the measurement results using Telkom IoT in several times of data collection and testing, the average RSSI (-dBm) is at -110 dBm to -115 dBm. While SNR is at -10 dB to -16 dB.
- 12 December 2024
- Published by Universitas Muslim Indonesia in ILKOM Jurnal Ilmiah
- Vol. 16 (3) , 255-270
Open AccessPerformance Analysis of LoRaWAN Communication Utilizing the RFM96 Module
This research discusses the utilization of LoRa and LoRaWAN or Low Power Wide Area (LPWA) and Low Power Wide Area Network (LPWAN). In this study, the application server is utilized using Telkom IoT. In its utilization, Telkom IoT can provide comprehensive results regarding LoRa quality of service capabilities such as bit rate, latency, and longitude and latitude data. Terrestrial measurements conduct tests in different areas with different conditions that cause different data obstruction, with several LoRa end-node points transmitting data with low bit-rate. For example, heart rate data. Some other parameters are the spreading factor (SF) and power consumption. Some parameters that determine the quality of transmitting data include the Spreading Factor and the Bandwidth used. From the analysis dan Experiment results, the Delay (ms) generated from measurements using RFM96 LoRa for IoT is around 0.02 seconds or 20 ms to around 0.05 seconds or 50 ms, and sometimes it can reach 0.07 ms to 0.09 ms. RSSI and SNR show the quality of the signal obtained which will provide a Quality of Service (QoS) value. From the measurement results using Telkom IoT in several times of data collection and testing, the average RSSI (-dBm) is at -110 dBm to -115 dBm. While SNR is at -10 dB to -16 dB.