Christoph Gross
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Christoph Gross has a total of 194 co-authors. Here are the top co-authors by number of shared publications:
- Janice L. Bishop
SETI Institute, Mountain View, USA
9 shared publications - Patrick Charles McGuire
Department of Meteorology and National Centre for Atmospheric Science, University of Reading, Reading, UK
7 shared publications - Giuseppe Augusto Marzo
Ames Research Center
5 shared publications L. Wendt
Planetary Sciences and Remote Sensing Group, Institute of Geological Sciences, Freie Universität Berlin, Berlin, Germany
5 shared publicationsMuna Al-Samir
5 shared publications- Sebastian H. G. Walter
Department of Earth Sciences Freie Universität Berlin Institute of Geological Sciences Berlin Germany
5 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Advances in the Mineralogy and Potential Formation Processes of Sulfates and Cl-Salts in the North Polar Dunes at Olympia Undae on Mars
The Olympia Undae Sand Sea of the North Polar region contains unique gypsum-rich dunes that provide insights into modern polar processes. Detailed characterization of gypsum and associated minerals is now feasible at the tens of meters scale due to advances in CRISM image processing and is revealing compositional variations across the dunes and interdune regions. Dunes with the strongest gypsum signatures are present in the eastern part of Olympia Undae and contain spectral features at 1.75, 1.94, 2.22, 2.27 and 2.48 μm as well as a triplet at 1.45, 1.49, and 1.54 μm. The bright interdune patches in the east are filled with ripples (as seen in HiRISE images) and have spectra consistent with gypsum but are brighter, indicating the presence of an additional spectrally bright material as well (likely a sulfate or chloride salt).Traveling west, the dunes have slightly weaker gypsum-like spectral bands that are shifted slightly and could be resulting from dehydration of the gypsum or the presence of additional alteration minerals. Specifically, the band at 1.75 µm in the eastern dunes is shifted to 1.78 µm, which is observed in spectra of bassanite and some hydrated Ca chlorides. Continuing from central to western Olympia Undae the ~1.94 µm band becomes substantially weaker, indicating a much lower abundance of gypsum. Polygonal cracks can be seen in HiRISE images of the interdune regions that are reminiscent of evaporitic-type formations accompanied by secondary salt precipitation. The interdune regions also have weak spectral signatures consistent with a mixture of hydrated Ca and Mg sulfates and possibly hydrated Ca chlorides. These interdune regions in central to western Olympia Undae may be providing glimpses of the Planum Boreum basal unit below the dunes.We are also investigating CRISM and HiRISE images bordering the Cavi region in order to gain insights into formation of the evaporitic-type salts under the Olympia Undae dunes. Surface materials at the Cavi region are hydrated but exhibit spectral properties different from those of gypsum and bassanite. Instead, spectra of dunes and regolith at the Cavi region have features similar to the spectra of hydrated ferric sulfates and perchlorates. Some hydrated chlorides may also be present. Ice and ice-regolith mixtures are also observed there.MOLA maps reveal a lower elevation in eastern Olympia Undae where the gypsum is strongest. Thus, if more water pooled here at the time of alteration of the basal unit, then more gypsum may have formed in this depression. This area also contains the highest abundance of bright gypsum-bearing ripples, suggesting wind reworking of bright polygonal surfaces as a mechanism for extracting gypsum from the basal unit. Additionally, wind patterns from east to west could be spreading gypsum westward and at the same time dehydrating the gypsum. Additionally, frost is frequently observed on the dunes and interdune regions in winter and spring and could be altering the mineralogy and morphology.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessAdvances in the Mineralogy and Potential Formation Processes of Sulfates and Cl-Salts in the North Polar Dunes at Olympia Undae on Mars
The Olympia Undae Sand Sea of the North Polar region contains unique gypsum-rich dunes that provide insights into modern polar processes. Detailed characterization of gypsum and associated minerals is now feasible at the tens of meters scale due to advances in CRISM image processing and is revealing compositional variations across the dunes and interdune regions. Dunes with the strongest gypsum signatures are present in the eastern part of Olympia Undae and contain spectral features at 1.75, 1.94, 2.22, 2.27 and 2.48 μm as well as a triplet at 1.45, 1.49, and 1.54 μm. The bright interdune patches in the east are filled with ripples (as seen in HiRISE images) and have spectra consistent with gypsum but are brighter, indicating the presence of an additional spectrally bright material as well (likely a sulfate or chloride salt).Traveling west, the dunes have slightly weaker gypsum-like spectral bands that are shifted slightly and could be resulting from dehydration of the gypsum or the presence of additional alteration minerals. Specifically, the band at 1.75 µm in the eastern dunes is shifted to 1.78 µm, which is observed in spectra of bassanite and some hydrated Ca chlorides. Continuing from central to western Olympia Undae the ~1.94 µm band becomes substantially weaker, indicating a much lower abundance of gypsum. Polygonal cracks can be seen in HiRISE images of the interdune regions that are reminiscent of evaporitic-type formations accompanied by secondary salt precipitation. The interdune regions also have weak spectral signatures consistent with a mixture of hydrated Ca and Mg sulfates and possibly hydrated Ca chlorides. These interdune regions in central to western Olympia Undae may be providing glimpses of the Planum Boreum basal unit below the dunes.We are also investigating CRISM and HiRISE images bordering the Cavi region in order to gain insights into formation of the evaporitic-type salts under the Olympia Undae dunes. Surface materials at the Cavi region are hydrated but exhibit spectral properties different from those of gypsum and bassanite. Instead, spectra of dunes and regolith at the Cavi region have features similar to the spectra of hydrated ferric sulfates and perchlorates. Some hydrated chlorides may also be present. Ice and ice-regolith mixtures are also observed there.MOLA maps reveal a lower elevation in eastern Olympia Undae where the gypsum is strongest. Thus, if more water pooled here at the time of alteration of the basal unit, then more gypsum may have formed in this depression. This area also contains the highest abundance of bright gypsum-bearing ripples, suggesting wind reworking of bright polygonal surfaces as a mechanism for extracting gypsum from the basal unit. Additionally, wind patterns from east to west could be spreading gypsum westward and at the same time dehydrating the gypsum. Additionally, frost is frequently observed on the dunes and interdune regions in winter and spring and could be altering the mineralogy and morphology.
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Constraining the Ancient Geochemical Environments that formed the Complex Phyllosilicate and Sulfate Assemblages at Mawrth Vallis Through Comparison with Field Sites
The Mawrth Vallis region of Mars features abundant phyllosilicate outcrops as well as smaller areas where sulfates are present. This study evaluates field sites where phyllosilicates and sulfates co-occur to assist in constraining the ancient geochemical environments on Mars. Mineral transitions at Mawrth Vallis indicate changing geochemical conditions over time - from the lower Fe-rich smectite horizon about 200 meters thick to thinner units of sulfates, Al-phyllosilicates including halloysite in some regions, then Si-rich phases at the top of the profile [1] (Fig. 1a-c). Smectites form through wet/dry cycling in generally arid environments, while halloysite requires more humid conditions. Ca-sulfates and Al-clays represent a decrease in pH from the environment supporting formation of Fe/Mg-smectite, and the jarosite outcrops indicate an even lower pH. Sulfuric gases released from Syrtis may have produced sulfates in the groundwater [2] that flowed downhill from Meridiani towards Mawrth Vallis (Fig. 1d). This could have produced acidic brines that altered the expansive Fe/Mg-smectites at Mawrth Vallis and formed pockets of sulfates. Specific phyllosilicate and sulfate minerals are mapped using vibrational bands in CRISM images (Fig. 1a). Spectral features in the region ~1.4-2.6 µm are most useful for identifying and characterizing these minerals, including the H2O combination band near 1.91-1.92 µm. The Fe-rich smectite outcrops also exhibit Fe-OH bands near 1.42 and 2.29-2.30 µm. The Al-smectite units include Al-OH bands at 1.41-1.42 and 2.20-2.21 µm, while small locations containing halloysite/kaolinite and alunite have additional bands near 1.39-1.47, 1.75, 2.17, and 2.32 µm (Fig. 2). Areas containing jarosite have spectral bands near 1.47, 1.85, 2.22, and 2.26 µm (Fig. 3). Sites including hydrated sulfates include a drop in reflectance near 2.4-2.5 µm and Ca sulfates have a band near 1.75-1.78 µm. Phyllosilicate - sulfate assemblages were investigated at field sites to assist in constraining the environments where these minerals form. The Painted Desert in Arizona features expansive outcrops of clay-bearing horizons (Fig. 4a), similar to Mawrth Vallis. Coordinated analyses of spectra from the field, lab, and aerial instruments of the light-toned and reddish horizons show the presence of clays and carbonates [3] (Fig. 4b-d). Sulfates are present in regions with polygonally-cracked surfaces where combinations of gypsum, jarosite, and montmorillonite are observed [4] (Fig 4ef). The south sulfur bank inside the Kilauea caldera (Fig. 5) contains a mixture of nontronite, saponite, montmorillonite, opal-A, gypsum, jarosite, and ferrihydrite due to hydrothermal alteration of ash and basalt from volcanic gases [5]. Lighter-toned outcrops are dominated by opal with some gypsum, saponite and jarosite (Fig. 5d), while the darker orange-tan layers include nontronite, ferrihydrite, and jarosite in addition to opal and gypsum (Fig. 5e). Analogs from the rainy Waimea Canyon region of Kauai include goethite, halloysite, ferrihydrite, and allophane in altered rinds on the rocks (Fig. 6). Additional sites altered under lower pH conditions contain hematite and jarosite [6]. Pedogenic alteration at the Painted Desert produced wide horizons of clay-bearing units interspersed with units of iron oxides/hydroxides and carbonates. Sulfates are observed together with phyllosilicates in regions with polygonally-cracked terrain. Jarosite and gypsum are present in a hydrothermal setting at Kilauea, while halloysite and goethite or jarosite and hematite are observed in the rainy and highly leached environment of Kauai. Observations of alteration minerals at these field sites suggest the Mawrth Vallis region of Mars experienced a largely arid environment with wet/dry cycling to produce the thick smectite profiles, with short-term periods of acidic fluids to form sulfates and strong leaching to form halloysite. Allophane likely formed on Mars when water was less abundant or colder [7]. Acknowledgements: The authors are grateful for support from NASA MDAP # 80NSSC19K1230 and NASA SSW #80NSSC23K0032. References: [1] Bishop et al. (2020) Multiple mineral horizons in layered outcrops at Mawrth Vallis, Mars, signify changing geochemical environments on early Mars, Icarus, 341, 113634. [2] Moore & Szynkiewicz (2023) Aqueous sulfate contributions in terrestrial basaltic catchments: Implications for understanding sulfate sources and transport in Meridiani Planum, Mars, Icarus, 391, 115342. [3] McKeown et al. (2009) Coordinated lab, field, and aerial study of the Painted Desert, AZ, as a potential analog site for phyllosilicates at Mawrth Vallis, Mars, 40th LPSC, #2509. [4] Perrin et al. (2018) Mars evaporite analog site containing jarosite and gypsum at Sulfate Hill, Painted Desert, AZ, 49th LPSC, #1801. [5] Bishop et al. (2024) Solfataric alteration at the South Sulfur Bank, Kilauea, Hawaii, as a mechanism for formation of sulfates, phyllosilicates, and silica on Mars American Miner., 109, 1871–1887. [6] Gruendler et al. (2023) Characterizing Altered Volcanic Rocks from Waimea Canyon, Kauai, 54th LPSC, #1892. [7] Bishop et al. (2018) Surface clay formation during short-term warmer and wetter conditions on a largely cold ancient Mars, Nature Astronomy, 2, 206-213. Figures: Fig. 1 a-c) Alteration at Mawrth Vallis, Mars [1]. a) CRISM spectra of 5 distinct units. b) Diagram of altered stratigraphy. c) View of CRISM over HRSC. d) Potential formation mechanism for sulfate formation in groundwater at Mawrth Vallis, after [2]. Fig. 2 a) HRSC view of light-toned phyllosilicate-rich units. b) CRISM image FRT0000B141. c) Mineral parameter maps for Fe-smectite, halloysite, Al-smectite. d) CRISM spectra of selected outcrops compared to spectra of minerals. Fig. 3 a) HRSC view of light-toned phyllosilicate-rich units. b) CRISM image FRT0000A425 with region containing jarosite marked by...
- 9 July 2025
- Published by Copernicus GmbH
Open AccessConstraining the Ancient Geochemical Environments that formed the Complex Phyllosilicate and Sulfate Assemblages at Mawrth Vallis Through Comparison with Field Sites
The Mawrth Vallis region of Mars features abundant phyllosilicate outcrops as well as smaller areas where sulfates are present. This study evaluates field sites where phyllosilicates and sulfates co-occur to assist in constraining the ancient geochemical environments on Mars. Mineral transitions at Mawrth Vallis indicate changing geochemical conditions over time - from the lower Fe-rich smectite horizon about 200 meters thick to thinner units of sulfates, Al-phyllosilicates including halloysite in some regions, then Si-rich phases at the top of the profile [1] (Fig. 1a-c). Smectites form through wet/dry cycling in generally arid environments, while halloysite requires more humid conditions. Ca-sulfates and Al-clays represent a decrease in pH from the environment supporting formation of Fe/Mg-smectite, and the jarosite outcrops indicate an even lower pH. Sulfuric gases released from Syrtis may have produced sulfates in the groundwater [2] that flowed downhill from Meridiani towards Mawrth Vallis (Fig. 1d). This could have produced acidic brines that altered the expansive Fe/Mg-smectites at Mawrth Vallis and formed pockets of sulfates. Specific phyllosilicate and sulfate minerals are mapped using vibrational bands in CRISM images (Fig. 1a). Spectral features in the region ~1.4-2.6 µm are most useful for identifying and characterizing these minerals, including the H2O combination band near 1.91-1.92 µm. The Fe-rich smectite outcrops also exhibit Fe-OH bands near 1.42 and 2.29-2.30 µm. The Al-smectite units include Al-OH bands at 1.41-1.42 and 2.20-2.21 µm, while small locations containing halloysite/kaolinite and alunite have additional bands near 1.39-1.47, 1.75, 2.17, and 2.32 µm (Fig. 2). Areas containing jarosite have spectral bands near 1.47, 1.85, 2.22, and 2.26 µm (Fig. 3). Sites including hydrated sulfates include a drop in reflectance near 2.4-2.5 µm and Ca sulfates have a band near 1.75-1.78 µm. Phyllosilicate - sulfate assemblages were investigated at field sites to assist in constraining the environments where these minerals form. The Painted Desert in Arizona features expansive outcrops of clay-bearing horizons (Fig. 4a), similar to Mawrth Vallis. Coordinated analyses of spectra from the field, lab, and aerial instruments of the light-toned and reddish horizons show the presence of clays and carbonates [3] (Fig. 4b-d). Sulfates are present in regions with polygonally-cracked surfaces where combinations of gypsum, jarosite, and montmorillonite are observed [4] (Fig 4ef). The south sulfur bank inside the Kilauea caldera (Fig. 5) contains a mixture of nontronite, saponite, montmorillonite, opal-A, gypsum, jarosite, and ferrihydrite due to hydrothermal alteration of ash and basalt from volcanic gases [5]. Lighter-toned outcrops are dominated by opal with some gypsum, saponite and jarosite (Fig. 5d), while the darker orange-tan layers include nontronite, ferrihydrite, and jarosite in addition to opal and gypsum (Fig. 5e). Analogs from the rainy Waimea Canyon region of Kauai include goethite, halloysite, ferrihydrite, and allophane in altered rinds on the rocks (Fig. 6). Additional sites altered under lower pH conditions contain hematite and jarosite [6]. Pedogenic alteration at the Painted Desert produced wide horizons of clay-bearing units interspersed with units of iron oxides/hydroxides and carbonates. Sulfates are observed together with phyllosilicates in regions with polygonally-cracked terrain. Jarosite and gypsum are present in a hydrothermal setting at Kilauea, while halloysite and goethite or jarosite and hematite are observed in the rainy and highly leached environment of Kauai. Observations of alteration minerals at these field sites suggest the Mawrth Vallis region of Mars experienced a largely arid environment with wet/dry cycling to produce the thick smectite profiles, with short-term periods of acidic fluids to form sulfates and strong leaching to form halloysite. Allophane likely formed on Mars when water was less abundant or colder [7]. Acknowledgements: The authors are grateful for support from NASA MDAP # 80NSSC19K1230 and NASA SSW #80NSSC23K0032. References: [1] Bishop et al. (2020) Multiple mineral horizons in layered outcrops at Mawrth Vallis, Mars, signify changing geochemical environments on early Mars, Icarus, 341, 113634. [2] Moore & Szynkiewicz (2023) Aqueous sulfate contributions in terrestrial basaltic catchments: Implications for understanding sulfate sources and transport in Meridiani Planum, Mars, Icarus, 391, 115342. [3] McKeown et al. (2009) Coordinated lab, field, and aerial study of the Painted Desert, AZ, as a potential analog site for phyllosilicates at Mawrth Vallis, Mars, 40th LPSC, #2509. [4] Perrin et al. (2018) Mars evaporite analog site containing jarosite and gypsum at Sulfate Hill, Painted Desert, AZ, 49th LPSC, #1801. [5] Bishop et al. (2024) Solfataric alteration at the South Sulfur Bank, Kilauea, Hawaii, as a mechanism for formation of sulfates, phyllosilicates, and silica on Mars American Miner., 109, 1871–1887. [6] Gruendler et al. (2023) Characterizing Altered Volcanic Rocks from Waimea Canyon, Kauai, 54th LPSC, #1892. [7] Bishop et al. (2018) Surface clay formation during short-term warmer and wetter conditions on a largely cold ancient Mars, Nature Astronomy, 2, 206-213. Figures: Fig. 1 a-c) Alteration at Mawrth Vallis, Mars [1]. a) CRISM spectra of 5 distinct units. b) Diagram of altered stratigraphy. c) View of CRISM over HRSC. d) Potential formation mechanism for sulfate formation in groundwater at Mawrth Vallis, after [2]. Fig. 2 a) HRSC view of light-toned phyllosilicate-rich units. b) CRISM image FRT0000B141. c) Mineral parameter maps for Fe-smectite, halloysite, Al-smectite. d) CRISM spectra of selected outcrops compared to spectra of minerals. Fig. 3 a) HRSC view of light-toned phyllosilicate-rich units. b) CRISM image FRT0000A425 with region containing jarosite marked by...
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Exploring the connection of the Northern and the Western Deltas in Jezero Crater on Mars
Introduction:Understanding the relationship between the western and northern deltas in the Jezero crater on Mars is crucial for the reconstruction of the water history in this region. The northern delta appears to be more eroded and older than the western delta; however, contemporaneous northern and western fan building was also recently proposed ([1], [2]). In our study, we explore the origin of the LCP (low-calcium pyroxene)/smectite and olivine/carbonate spectral units, which were found in both deltas and which may record the interaction between them in the past [2] (Fig. 1). We use topographic and compositional data to model potential deposition of the sediments from the western inlet on the northern delta. Our results shed light on the interconnection between the western and northern deltas, establish their relative age and suggest that Neretva Vallis (western inlet) could be the source of the LCP/smectite unit on both deltas in Jezero.Fig. 1. CRISM Mafic map, adapted from [1]; Green – LCP/smectite; red – olivine/carbonate; blue – High-calcium pyroxene. CC’ profile is shown in Fig.2.Fig. 2. Example of the topographic-compositional profile (profile line is on Fig. 1). Data:CRISM spectral data [2] and the Mars 2020 Science Investigation CTX DEM Mosaic (20 m/pixel) and its corresponding ortho-mosaic (5 m/pixel, [3], [4]) were used.Methodology: Based on topographic and compositional data we plotted topographic-compositional profiles that show changes in topography and composition simultaneously (Fig. 2).To model the hypothesized deposition of the sediments coming from the western inlet through the northernmost channel located within the western delta (Fig.3a), we combined two equations: 1) sediment settling velocity [5] – for the vertical movement of sediment particles and 2) conservation of volumetric flow rate before and after the river enters the lake – for the horizontal movement of the sediment particles. Using the sediment transport equations of [6], we determined that particles up to 5 mm in size are transported in suspension through the above-mentioned channel. Therefore, we used a grain size range from 5 mm (small pebble) to 0.0039 mm (clay) for our model calculating the distance at which sediments transported by the northernmost channel of the western delta can be deposited on the northern delta.Results: Topographic-compositional profiles show that the LCP/smectite unit is stratigraphically higher than the olivine/carbonate unit, but does not reveal prominent correlations between separate delta outcrops that would represent the parallel layering typical of Gilbert-type deltas. Therefore, the LCP/smectite unit had to overlie the olivine/carbonate unit when the northern delta was already eroded to its present topography. According to the CRISM data, the closest possible source of the LCP/smectite unit is the western delta and the watershed of the western inlet. At the same time, the CTX DTM shows that a scenario where the northernmost channel of the western delta is subaerial (above the shoreline), while the northern delta is subaqueous could be possible (Fig.3a). Therefore, we hypothesize that the LCP/smectite unit consists of material transported by the northernmost channel of the western delta which is connected to the western inlet. Our model shows that fine silt can be deposited at a distance of 5,000 – 10,000 m from the end of the channel – at this distance the LCP/smectite unit is indeed found on the northern delta (Fig. 3b).Fig. 3. a) Overview map with studied features; b) Results of modeling, showing that fine silt will be deposited on the southern part of the northern delta, which coincides with the appearance of the LCP/Smectite units.Discussion:We validated the model using information about the minimum grain size of the western delta provided by the Perseverance rover results (in bottomsets – “
- 9 July 2025
- Published by Copernicus GmbH
Open AccessExploring the connection of the Northern and the Western Deltas in Jezero Crater on Mars
Introduction:Understanding the relationship between the western and northern deltas in the Jezero crater on Mars is crucial for the reconstruction of the water history in this region. The northern delta appears to be more eroded and older than the western delta; however, contemporaneous northern and western fan building was also recently proposed ([1], [2]). In our study, we explore the origin of the LCP (low-calcium pyroxene)/smectite and olivine/carbonate spectral units, which were found in both deltas and which may record the interaction between them in the past [2] (Fig. 1). We use topographic and compositional data to model potential deposition of the sediments from the western inlet on the northern delta. Our results shed light on the interconnection between the western and northern deltas, establish their relative age and suggest that Neretva Vallis (western inlet) could be the source of the LCP/smectite unit on both deltas in Jezero.Fig. 1. CRISM Mafic map, adapted from [1]; Green – LCP/smectite; red – olivine/carbonate; blue – High-calcium pyroxene. CC’ profile is shown in Fig.2.Fig. 2. Example of the topographic-compositional profile (profile line is on Fig. 1). Data:CRISM spectral data [2] and the Mars 2020 Science Investigation CTX DEM Mosaic (20 m/pixel) and its corresponding ortho-mosaic (5 m/pixel, [3], [4]) were used.Methodology: Based on topographic and compositional data we plotted topographic-compositional profiles that show changes in topography and composition simultaneously (Fig. 2).To model the hypothesized deposition of the sediments coming from the western inlet through the northernmost channel located within the western delta (Fig.3a), we combined two equations: 1) sediment settling velocity [5] – for the vertical movement of sediment particles and 2) conservation of volumetric flow rate before and after the river enters the lake – for the horizontal movement of the sediment particles. Using the sediment transport equations of [6], we determined that particles up to 5 mm in size are transported in suspension through the above-mentioned channel. Therefore, we used a grain size range from 5 mm (small pebble) to 0.0039 mm (clay) for our model calculating the distance at which sediments transported by the northernmost channel of the western delta can be deposited on the northern delta.Results: Topographic-compositional profiles show that the LCP/smectite unit is stratigraphically higher than the olivine/carbonate unit, but does not reveal prominent correlations between separate delta outcrops that would represent the parallel layering typical of Gilbert-type deltas. Therefore, the LCP/smectite unit had to overlie the olivine/carbonate unit when the northern delta was already eroded to its present topography. According to the CRISM data, the closest possible source of the LCP/smectite unit is the western delta and the watershed of the western inlet. At the same time, the CTX DTM shows that a scenario where the northernmost channel of the western delta is subaerial (above the shoreline), while the northern delta is subaqueous could be possible (Fig.3a). Therefore, we hypothesize that the LCP/smectite unit consists of material transported by the northernmost channel of the western delta which is connected to the western inlet. Our model shows that fine silt can be deposited at a distance of 5,000 – 10,000 m from the end of the channel – at this distance the LCP/smectite unit is indeed found on the northern delta (Fig. 3b).Fig. 3. a) Overview map with studied features; b) Results of modeling, showing that fine silt will be deposited on the southern part of the northern delta, which coincides with the appearance of the LCP/Smectite units.Discussion:We validated the model using information about the minimum grain size of the western delta provided by the Perseverance rover results (in bottomsets – “
- Open Access
- 3 July 2024
- Published by Elsevier in Acta Astronautica
- Vol. 223, 15-24
Prospecting in-situ resources for future crewed missions to Mars
- 3 July 2024
- Published by Elsevier in Acta Astronautica
- Vol. 223, 15-24
Open AccessProspecting in-situ resources for future crewed missions to Mars
- Open Access
- 3 July 2024
- Published by Copernicus GmbH
Resource Reconnaissance for Future Crewed Missions to Mars
Mars offers abundant raw materials that are of potential value for future human endeavors. Numerous vital elements can be found directly at the surface. The exploration of these natural resource deposits, the concentration of the raw materials contained in them, and the feasibility of mining and refinement are open questions that require further consideration. The natural geological variations in ore deposits can significantly impact viability of exploration sites and of the engineering architecture. Therefore, comprehension of these features is crucial for selecting and optimizing a particular technical design. This underlines the need for accurate resource exploration missions. Refinement and restructuring must be investigated to provide reliable fabrication systems since In Situ Resource Utilization (ISRU) is able to drastically cut down logistical dependence from Earth.Water is an essential requirement for an extended stay on Mars. It will serve as a consumable for astronauts and is needed for the production of propellant and oxygen, and for construction use. Water could even serve as radiation shielding if procurable in sufficient amounts. In contrast to subterranean ice, hydrated minerals offer a promising and reliable potential for water extraction directly at the surface of Mars and at lower latitudes. A large diversity of hydrated minerals such as phyllosilicates, hydrated silica, zeolites, and sulfates have been detected from orbit using visible near infrared (VIS-NIR) reflectance spectroscopy [1-3]. We address the concept of harvesting resources in situ by reviewing the potential of several large deposits of hydrated minerals found on the surface of Mars thanks to previous orbital detections (Fig. 1). We also present estimates of water volumes potentially retrievable from specific deposits and describe additional uses of the hydrated minerals for example as feedstock for a Bio-regenerative Life-Support System (BLSS).A BLSS architecture tends to be superior in terms of mass efficiency compared to non-bio-regenerative, i.e., chemical or physical life support systems, especially for protracted mission durations [4]. BLSS have the unique advantage of managing biological waste through biological processes exclusively. In addition, if higher plants are cultivated, they offer psychological comforts and nutritional benefits derived from the presence of plant life and as fresh food [5]. Thus, BLSS systems realized in the form of one or multiple greenhouses, are an indispensable component for sustaining a human presence on Martian terrain [6, 7]. Over the last 40 years, several studies have shown that crops can be efficiently grown on hydroponic or soilless media [8, 9]. In fact, crop cultivation in controlled environments can even meet or surpass record yields [10]. From 2018 to 2022, the EDEN ISS project from the German Aerospace Center operated a space-analog test facility greenhouse near the Neumayer III station in Antarctica, potentially resulting in the closest Mars analog we can find on Earth (Fig. 2). In the first year of operation, 268 kg of edible biomass was produced on the 12.5 m2 cultivation area of the greenhouse [11] with soilless media. Additional advantages include removing CO2 from the atmosphere, keeping water in a recycling loop, and producing oxygen. These findings demonstrate the importance of BLSS and can provide a scalable estimate of the potential contribution to logistics and required transport of materials for long duration crewed missions. [1] S.L. Murchie et al. (2009). A synthesis of Martian aqueous mineralogy after 1 Mars year of observations from the Mars Reconnaissance Orbiter, J Geophys Res Planets 114. https://doi.org/10.1029/2009JE003342. [2] J.F. Mustard et al. (2008). Hydrated silicate minerals on Mars observed by the Mars Reconnaissance Orbiter CRISM instrument, Nature 454, 305–309. https://doi.org/10.1038/nature07097. [3] B.L. Ehlmann, C.S. Edwards (2014). Mineralogy of the Martian Surface, Annu Rev Earth Planet Sci 42, 291–315. https://doi.org/10.1146/annurev-earth-060313-055024. [4] C. Lasseur (2010). Melissa: The European project of a closed life support system, Gravitational and Space Biology 23 (2). [5] C. Mitchell (1994). Bioregenerative life-support systems, Am J Clin Nutr, 60 820S-824S. https://doi.org/10.1093/ajcn/60.5.820S. [6] M. Bamsey et al. (2009). Canadian advanced life support capacities and future directions, Advances in Space Research 44, 151–161. https://doi.org/10.1016/j.asr.2009.03.024. [7] H. Liu et al. (2021). Review of research into bioregenerative life support system(s) which can support humans living in space, Life Sci Space Res (Amst) 31, 113–120. https://doi.org/10.1016/j.lssr.2021.09.003. [8] J.F. Thomas, C.D. Raper (1983) Photoperiod Effects on Soybean Growth during the Onset of Reproductive Development under Various Temperature Regimes, Botanical Gazette 144, 471–476. http://www.jstor.org/stable/2474450. [9] Y. Tako (2001). Integration of Sequential Cultivation of Main Crops and Gas and Water Processing Subsystems Using Closed Ecology Experiment Facilities, https://doi.org/10.4271/2001-01-2133. [10] R.M. Wheeler, T.W. Tibbitts (1987). Utilization of potatoes for life support systems in space: III. Productivity at successive harvest dates under 12-H and 24-H photoperiods, Am Potato J 64, 311–320. https://doi.org/10.1007/BF02853523. [11] P. Zabel et al. (2020). Biomass Production of the EDEN ISS Space Greenhouse in Antarctica During the 2018 Experiment Phase, Front Plant Sci 11. https://doi.org/10.3389/fpls.2020.00656. Figure 1: Color-coded Mars Orbiter Laser Altimeter (MOLA) map showing the example regions in dashed white box. Figure 2: The EDEN ISS greenhouse in Antarctica with the Neumayer III station in the background (top). Cultivation area inside the test container (bottom).
- 3 July 2024
- Published by Copernicus GmbH
Open AccessResource Reconnaissance for Future Crewed Missions to Mars
Mars offers abundant raw materials that are of potential value for future human endeavors. Numerous vital elements can be found directly at the surface. The exploration of these natural resource deposits, the concentration of the raw materials contained in them, and the feasibility of mining and refinement are open questions that require further consideration. The natural geological variations in ore deposits can significantly impact viability of exploration sites and of the engineering architecture. Therefore, comprehension of these features is crucial for selecting and optimizing a particular technical design. This underlines the need for accurate resource exploration missions. Refinement and restructuring must be investigated to provide reliable fabrication systems since In Situ Resource Utilization (ISRU) is able to drastically cut down logistical dependence from Earth.Water is an essential requirement for an extended stay on Mars. It will serve as a consumable for astronauts and is needed for the production of propellant and oxygen, and for construction use. Water could even serve as radiation shielding if procurable in sufficient amounts. In contrast to subterranean ice, hydrated minerals offer a promising and reliable potential for water extraction directly at the surface of Mars and at lower latitudes. A large diversity of hydrated minerals such as phyllosilicates, hydrated silica, zeolites, and sulfates have been detected from orbit using visible near infrared (VIS-NIR) reflectance spectroscopy [1-3]. We address the concept of harvesting resources in situ by reviewing the potential of several large deposits of hydrated minerals found on the surface of Mars thanks to previous orbital detections (Fig. 1). We also present estimates of water volumes potentially retrievable from specific deposits and describe additional uses of the hydrated minerals for example as feedstock for a Bio-regenerative Life-Support System (BLSS).A BLSS architecture tends to be superior in terms of mass efficiency compared to non-bio-regenerative, i.e., chemical or physical life support systems, especially for protracted mission durations [4]. BLSS have the unique advantage of managing biological waste through biological processes exclusively. In addition, if higher plants are cultivated, they offer psychological comforts and nutritional benefits derived from the presence of plant life and as fresh food [5]. Thus, BLSS systems realized in the form of one or multiple greenhouses, are an indispensable component for sustaining a human presence on Martian terrain [6, 7]. Over the last 40 years, several studies have shown that crops can be efficiently grown on hydroponic or soilless media [8, 9]. In fact, crop cultivation in controlled environments can even meet or surpass record yields [10]. From 2018 to 2022, the EDEN ISS project from the German Aerospace Center operated a space-analog test facility greenhouse near the Neumayer III station in Antarctica, potentially resulting in the closest Mars analog we can find on Earth (Fig. 2). In the first year of operation, 268 kg of edible biomass was produced on the 12.5 m2 cultivation area of the greenhouse [11] with soilless media. Additional advantages include removing CO2 from the atmosphere, keeping water in a recycling loop, and producing oxygen. These findings demonstrate the importance of BLSS and can provide a scalable estimate of the potential contribution to logistics and required transport of materials for long duration crewed missions. [1] S.L. Murchie et al. (2009). A synthesis of Martian aqueous mineralogy after 1 Mars year of observations from the Mars Reconnaissance Orbiter, J Geophys Res Planets 114. https://doi.org/10.1029/2009JE003342. [2] J.F. Mustard et al. (2008). Hydrated silicate minerals on Mars observed by the Mars Reconnaissance Orbiter CRISM instrument, Nature 454, 305–309. https://doi.org/10.1038/nature07097. [3] B.L. Ehlmann, C.S. Edwards (2014). Mineralogy of the Martian Surface, Annu Rev Earth Planet Sci 42, 291–315. https://doi.org/10.1146/annurev-earth-060313-055024. [4] C. Lasseur (2010). Melissa: The European project of a closed life support system, Gravitational and Space Biology 23 (2). [5] C. Mitchell (1994). Bioregenerative life-support systems, Am J Clin Nutr, 60 820S-824S. https://doi.org/10.1093/ajcn/60.5.820S. [6] M. Bamsey et al. (2009). Canadian advanced life support capacities and future directions, Advances in Space Research 44, 151–161. https://doi.org/10.1016/j.asr.2009.03.024. [7] H. Liu et al. (2021). Review of research into bioregenerative life support system(s) which can support humans living in space, Life Sci Space Res (Amst) 31, 113–120. https://doi.org/10.1016/j.lssr.2021.09.003. [8] J.F. Thomas, C.D. Raper (1983) Photoperiod Effects on Soybean Growth during the Onset of Reproductive Development under Various Temperature Regimes, Botanical Gazette 144, 471–476. http://www.jstor.org/stable/2474450. [9] Y. Tako (2001). Integration of Sequential Cultivation of Main Crops and Gas and Water Processing Subsystems Using Closed Ecology Experiment Facilities, https://doi.org/10.4271/2001-01-2133. [10] R.M. Wheeler, T.W. Tibbitts (1987). Utilization of potatoes for life support systems in space: III. Productivity at successive harvest dates under 12-H and 24-H photoperiods, Am Potato J 64, 311–320. https://doi.org/10.1007/BF02853523. [11] P. Zabel et al. (2020). Biomass Production of the EDEN ISS Space Greenhouse in Antarctica During the 2018 Experiment Phase, Front Plant Sci 11. https://doi.org/10.3389/fpls.2020.00656. Figure 1: Color-coded Mars Orbiter Laser Altimeter (MOLA) map showing the example regions in dashed white box. Figure 2: The EDEN ISS greenhouse in Antarctica with the Neumayer III station in the background (top). Cultivation area inside the test container (bottom).
- Open Access
- 3 July 2024
- Published by Copernicus GmbH
Water and Sediment Transport Processes in Jezero Crater
Introduction: The current NASA's Mars 2020 mission is exploring the Jezero crater that was once filled with water. Since it is widely acknowledged that access to liquid water is essential for life, studying the fluvial activity in Jezero can aid in the crater’s habitability assessment. We examined ten water-related processes using water and sediment transport models by [3]: 1) the western inlet valley carving, 2) the northern inlet valley carving, 3) crater flooding by only northern inlet, 4) by both northern and western inlets, 5) erosion of the western rim by the western inlet, 6) erosion of the eastern rim due to the outlet, 7) water outflow from the crater, 8) outlet valley carving, 9) western delta deposition, 10) northern delta deposition. The goal of our study was to calculate the minimum timescales for each event and estimate the minimum volume of water provided/released during each event. Relative comparison of timescales and of water amount which we calculated based on new geomorphological observations introduces a deeper understanding of the water history in Jezero.Data: Measurements of channel sizes, valleys, deltas, eroded rims, and outflowed water volumes were based on Mars 2020 Science Investigation CTX DEM Mosaic [5] and HRSC Mars Chart (HMC) DTM and corresponding orthomosaics [2].Geomorphological observations: The northern inlet was most likely involved in the crater flooding because it has terraces at the same height as the breaching terraces in the eastern rim (breaching happened in 3 phases, as shown in [7]). The western inlet, in contrast, has no terraces at the breaching heights. This implies that either it was not involved in crater flooding, or its terraces were eroded.Mapping: Both deltas were mapped using three potential extents: minimum, medium, and maximum. Valleys were mapped based on two morphological features: 1) initial valley, borders of which are not visible on HMC ortho-mosaics and could only be recognized on slope and profile curvature rasters, calculated from HMC DTM; 2) last incision valley, which was mapped on HMC ortho-rectified image mosaic.Measurements: Dimensions of the channels were derived from longitudinal and cross-sectional profiles on CTX DTM. Water volume to fill the crater before breaching and the amount of sediments, transported from valleys and deposited in deltas were estimated using ArcGIS Tools „Surface Volume“ and „CutFill“.Methodology: Flow discharge and sediment transport models [3] are used to calculate water and sediment transport timescales under constant bank-full discharge when most of erosion occurs. The models do not include the climate and non-bank-full conditions to constrain minimum timescales. Main input parameters include: Median Grain Size, Channel depth, width and slope, Sediment porosity, Shields criterion for incipient motion, Sediment density, Martian gravity, and Water density. Data from the Perseverance rover [1] were taken for the Median Grain Size estimation. Sediment porosity, Sediment density, and Shields criterion for incipient motion were taken based on previous research [3], [4], [6]. Several scenarios were modeled with varying values of input parameters in the most expectable ranges. Eastern and western rim breechings were modelled both in a catastrophic scenario and in a long-term erosion under constant flow scenario.Results: A comparison of the timescales of the last incised valleys carving and delta depositions showed that deltas were deposited during the last incision of the corresponding valleys. For the northern delta, the medium extent is the most probable; for the western delta, the maximum extent is the most probable.Most modelled cases, in both long-term and catastrophic scenarios of the rim breaching, showed that the outlet valley carving lasted longer than the eastern rim erosion. Therefore, Jezero was an open-basin lake after breaching.The eastern rim erosion and water outflow during breaching showed different results depending on the scenario. In the long-term scenario, the eastern rim erosion lasted longer than the outflow of water which was stored in the crater before breaching. That means, that this amount of water (236 km3) was not enough to carve the breach. In the catastrophic scenario there are overlapping timescales, therefore, the eastern rim breaching, and water outflow could happen simultaneously.Multiplying the timescales by corresponding discharges allows us to calculate the minimum water volume provided/released during each event. Dividing the minimum water volume by the volume of the crater before breaching (446 km3) shows that the northern inlet as well as the western inlet could alone flood the crater (last column in Table 1).A comparison of the minimum amount of water discharged after the breach (236 km3) with the amount of water needed to carve the whole outlet valley (1000 – 14800 km3, Table 1) confirms that Jezero must have been an open-basin lake after the breaching.Table 1. Minimum water volume provided/released during the carving of the valleys. Timescales presented for the total valley carving (initial valley and last incised valley together). Timescale, Earth years Discharge, km3/day Minimum volume of provided/released water, km3 How many times Jezero could be filled before breaching (basin volume = 446 km3) Northern Valley Total 70 – 632 ~0.2 4600 – 42000 10 – 94 Western Valley Total 505 – 3792 ~0.2 33500 – 253000 75 – 567 Outlet Valley Total 1.4 – 21.2 ~1.9 1000 – 14800 – References: [1] Farley K., and Stack K. (February 15, 2023). Mars 2020 reports, Volume 2. https://mars.nasa.gov/internal_resources/1656/[2] Gwinner, K. et al. (2016). The High Resolution Stereo Camera (HRSC) of Mars Express and its approach to science analysis and mapping for Mars and its satellites. Planetary and Space Science, 126, 93–138. https://doi.org/10.1016/j.pss.2016.02.014[3]...
- 3 July 2024
- Published by Copernicus GmbH
Open AccessWater and Sediment Transport Processes in Jezero Crater
Introduction: The current NASA's Mars 2020 mission is exploring the Jezero crater that was once filled with water. Since it is widely acknowledged that access to liquid water is essential for life, studying the fluvial activity in Jezero can aid in the crater’s habitability assessment. We examined ten water-related processes using water and sediment transport models by [3]: 1) the western inlet valley carving, 2) the northern inlet valley carving, 3) crater flooding by only northern inlet, 4) by both northern and western inlets, 5) erosion of the western rim by the western inlet, 6) erosion of the eastern rim due to the outlet, 7) water outflow from the crater, 8) outlet valley carving, 9) western delta deposition, 10) northern delta deposition. The goal of our study was to calculate the minimum timescales for each event and estimate the minimum volume of water provided/released during each event. Relative comparison of timescales and of water amount which we calculated based on new geomorphological observations introduces a deeper understanding of the water history in Jezero.Data: Measurements of channel sizes, valleys, deltas, eroded rims, and outflowed water volumes were based on Mars 2020 Science Investigation CTX DEM Mosaic [5] and HRSC Mars Chart (HMC) DTM and corresponding orthomosaics [2].Geomorphological observations: The northern inlet was most likely involved in the crater flooding because it has terraces at the same height as the breaching terraces in the eastern rim (breaching happened in 3 phases, as shown in [7]). The western inlet, in contrast, has no terraces at the breaching heights. This implies that either it was not involved in crater flooding, or its terraces were eroded.Mapping: Both deltas were mapped using three potential extents: minimum, medium, and maximum. Valleys were mapped based on two morphological features: 1) initial valley, borders of which are not visible on HMC ortho-mosaics and could only be recognized on slope and profile curvature rasters, calculated from HMC DTM; 2) last incision valley, which was mapped on HMC ortho-rectified image mosaic.Measurements: Dimensions of the channels were derived from longitudinal and cross-sectional profiles on CTX DTM. Water volume to fill the crater before breaching and the amount of sediments, transported from valleys and deposited in deltas were estimated using ArcGIS Tools „Surface Volume“ and „CutFill“.Methodology: Flow discharge and sediment transport models [3] are used to calculate water and sediment transport timescales under constant bank-full discharge when most of erosion occurs. The models do not include the climate and non-bank-full conditions to constrain minimum timescales. Main input parameters include: Median Grain Size, Channel depth, width and slope, Sediment porosity, Shields criterion for incipient motion, Sediment density, Martian gravity, and Water density. Data from the Perseverance rover [1] were taken for the Median Grain Size estimation. Sediment porosity, Sediment density, and Shields criterion for incipient motion were taken based on previous research [3], [4], [6]. Several scenarios were modeled with varying values of input parameters in the most expectable ranges. Eastern and western rim breechings were modelled both in a catastrophic scenario and in a long-term erosion under constant flow scenario.Results: A comparison of the timescales of the last incised valleys carving and delta depositions showed that deltas were deposited during the last incision of the corresponding valleys. For the northern delta, the medium extent is the most probable; for the western delta, the maximum extent is the most probable.Most modelled cases, in both long-term and catastrophic scenarios of the rim breaching, showed that the outlet valley carving lasted longer than the eastern rim erosion. Therefore, Jezero was an open-basin lake after breaching.The eastern rim erosion and water outflow during breaching showed different results depending on the scenario. In the long-term scenario, the eastern rim erosion lasted longer than the outflow of water which was stored in the crater before breaching. That means, that this amount of water (236 km3) was not enough to carve the breach. In the catastrophic scenario there are overlapping timescales, therefore, the eastern rim breaching, and water outflow could happen simultaneously.Multiplying the timescales by corresponding discharges allows us to calculate the minimum water volume provided/released during each event. Dividing the minimum water volume by the volume of the crater before breaching (446 km3) shows that the northern inlet as well as the western inlet could alone flood the crater (last column in Table 1).A comparison of the minimum amount of water discharged after the breach (236 km3) with the amount of water needed to carve the whole outlet valley (1000 – 14800 km3, Table 1) confirms that Jezero must have been an open-basin lake after the breaching.Table 1. Minimum water volume provided/released during the carving of the valleys. Timescales presented for the total valley carving (initial valley and last incised valley together). Timescale, Earth years Discharge, km3/day Minimum volume of provided/released water, km3 How many times Jezero could be filled before breaching (basin volume = 446 km3) Northern Valley Total 70 – 632 ~0.2 4600 – 42000 10 – 94 Western Valley Total 505 – 3792 ~0.2 33500 – 253000 75 – 567 Outlet Valley Total 1.4 – 21.2 ~1.9 1000 – 14800 – References: [1] Farley K., and Stack K. (February 15, 2023). Mars 2020 reports, Volume 2. https://mars.nasa.gov/internal_resources/1656/[2] Gwinner, K. et al. (2016). The High Resolution Stereo Camera (HRSC) of Mars Express and its approach to science analysis and mapping for Mars and its satellites. Planetary and Space Science, 126, 93–138. https://doi.org/10.1016/j.pss.2016.02.014[3]...
- Open Access
- 3 July 2024
- Published by Copernicus GmbH
Characterizing the New Mineral FeSO4OH on Mars and Describing its Geochemical History and Association with Other Sulfates
Sulfate minerals are an integral component of the martian surface and understanding the formation and alteration of these minerals provides clues about their geochemical environment. One sulfate phase in particular has been intriguing Mars scientists for over 15 years. An unusual spectral band at 2.236 µm was discovered in CRISM spectra of Mars at the plateau bordering Juventae Chasma [1] and in Aram Chaos [2]. This spectral band does not line up with any known minerals, but is observed for FeSO4OH, a new mineral formed by heating hydrated iron sulfates [3]. Crystal structure diagrams indicate that FeSO4OH has a structure similar to that of szomolnokite (FeSO4•H2O), but with OH replacing H2O [4]. Experiments heating szomolnokite, rozenite, and melanterite in the lab resulted in production of some FeSO4OH at 150 °C from rozenite and melanterite after 30 minutes and complete transformation at 200 °C after 30 minutes, while reaction of szomolnokite required longer heating at 200 °C and/or elevated temperatures for transformation to FeSO4OH. Additional lab experiments also demonstrate that oxygen is required for reaction of these hydrated ferrous sulfates to form FeSO4OH [4].Application of FeSO4OH spectra to Mars has benefitted from improved processing techniques [5] and mapping algorithms [6] for CRISM images that has enabled characterization of smaller spot sizes with cleaner spectra. Exposures of this unusual ferric sulfate phase with spectral features near 2.23 µm at Aram Chaos closely resemble pure FeSO4OH formed in the lab, while the thinner units on the Juventae plateau are either mixed with other components or represent incompletely formed FeSO4OH phases. This Fe hydroxysulfate is currently associated with monohydrated sulfate (MHS) outcrops at Aram Chaos, although polyhydrated sulfate (PHS) outcrops are also present nearby. In contrast, only PHS outcrops are currently observed on the Juventae plateau.CRISM spectra with a spectral band at 2.225-2.238 µm were observed at several locations at Aram Chaos. The spectra of these units also contain accompanying features at 1.48, 1.82, 2.19, and 2.37 µm (Fig. 1). Small variations in the ~2.23 µm band are attributed to changes in the Fe-Mg chemistry. Pure FeSO4OH has a band at 2.236 µm, while heated FeMg-MHS has a band at 2.226 µm. The FeSO4OH units at Aram Chaos are typically found adjacent to MHS outcrops (Fig. 2), including both Fe-rich MHS (similar to szomolnokite) with bands near 2.11-2.12 and 2.40 µm and kieserite (MgSO4•H20) with spectral bands near 2.14 and 2.41 µm. Spectra of szomolnokite and kieserite measured at colder, Mars-like temperatures have bands at ~2.11 and 2.14 µm [7], similar to these observations. The MHS spectral units more consistent with kieserite are darker than the szomolnokite-like MHS units and are covered by debris and ripples (Fig. 2C). Some of the MHS units at Aram Chaos may have formerly been mixtures of szomolnokite and kieserite, where the szomolnokite transformed to FeSO4OH and the kieserite remained. Alternatively, polyhydrated Fe and Mg sulfates may have been present that altered to form FeSO4OH, szomolnokite, and kieserite, depending on variations in the geochemistry. The reaction to form FeSO4OH proceeds as Fe2+ in szomolnokite is oxidized to Fe3+ while the H2O loses a proton to form OH. Some of the MHS outcrops include weak bands near 2.23 µm, indicating partial alteration to form a mixed phase containing some MHS and some FeSO4OH (Fig. 3). The PHS spectra contain bands near 1.44 and 1.93-1.95 µm and a drop in reflectance near 2.42 µm (Fig. 3), similar to spectra of rozenite (FeSO4•4H20) and starkeyite (MgSO4•4H20).Spectra at the Juventae plateau were collected from thin light-toned layered deposits, including spectral signatures due to PHS and FeSO4OH, and pyroxene-bearing units (Figs. 3-4). The stratigraphy of the outcrops shows a pyroxene-bearing substrate below the light-toned layered materials and a different pyroxene-bearing caprock unit covering the Fe sulfates (Fig. 4). Thin units containing spectral features consistent with PHS (blue) and FeSO4OH (red) are observed, and some of these thin units include spectral features due to both materials. Morphologies of these primary four units are displayed in Fig. 5. The pyroxene bearing substrate (dark cyan) is flatter with extensive polygonal fracturing, whereas the pyroxene-bearing caprock (green) is partially covered by ripples and appears hilly and uneven in topography due to differential erosion. The textures of the PHS- and FeSO4OH-bearing units are distinct from those of the pyroxene-bearing units, but appear related to each other with fine-scale layering that varies in brightness, color, and fracturing.The presence of highly pure FeSO4OH outcrops neighboring MHS at Aram Chaos and less pure outcrops of FeSO4OH neighboring PHS on the plateau NW of Juventae Chasma indicate an active geochemical history in Mars’ past. The hydrated sulfates likely formed in evaporative environments, while the FeSO4OH likely formed through heating. The FeSO4OH-bearing units at the Juventaue plateau could be mixed with spectrally neutral components that dilute the FeSO4OH spectral features. Coordinated characterization of the near-infrared (NIR) and mid-IR spectral features of Fe sulfates (Fig. 6) is enabling a better understanding of the spectral features due to FeSO4OH in these intriguing outcrops on Mars.Acknowledgements: The authors are grateful for support from NASA MDAP #80NSSC21K1103, NASA SSW #80NSSC23K0032, Austrian Science Fund FWF #P34227-N, and Europlanet Transnational Access funds.References: [1] Bishop J.L. et al. (2009) Mineralogy of Juventae Chasma…, JGR, 114, doi:10.1029/2009JE003352. [2] Lichtenberg K. A. et al. (2010) Stratigraphy of hydrated sulfates in the sedimentary deposits of Aram Chaos, Mars, JGR, 115,...
- 3 July 2024
- Published by Copernicus GmbH
Open AccessCharacterizing the New Mineral FeSO4OH on Mars and Describing its Geochemical History and Association with Other Sulfates
Sulfate minerals are an integral component of the martian surface and understanding the formation and alteration of these minerals provides clues about their geochemical environment. One sulfate phase in particular has been intriguing Mars scientists for over 15 years. An unusual spectral band at 2.236 µm was discovered in CRISM spectra of Mars at the plateau bordering Juventae Chasma [1] and in Aram Chaos [2]. This spectral band does not line up with any known minerals, but is observed for FeSO4OH, a new mineral formed by heating hydrated iron sulfates [3]. Crystal structure diagrams indicate that FeSO4OH has a structure similar to that of szomolnokite (FeSO4•H2O), but with OH replacing H2O [4]. Experiments heating szomolnokite, rozenite, and melanterite in the lab resulted in production of some FeSO4OH at 150 °C from rozenite and melanterite after 30 minutes and complete transformation at 200 °C after 30 minutes, while reaction of szomolnokite required longer heating at 200 °C and/or elevated temperatures for transformation to FeSO4OH. Additional lab experiments also demonstrate that oxygen is required for reaction of these hydrated ferrous sulfates to form FeSO4OH [4].Application of FeSO4OH spectra to Mars has benefitted from improved processing techniques [5] and mapping algorithms [6] for CRISM images that has enabled characterization of smaller spot sizes with cleaner spectra. Exposures of this unusual ferric sulfate phase with spectral features near 2.23 µm at Aram Chaos closely resemble pure FeSO4OH formed in the lab, while the thinner units on the Juventae plateau are either mixed with other components or represent incompletely formed FeSO4OH phases. This Fe hydroxysulfate is currently associated with monohydrated sulfate (MHS) outcrops at Aram Chaos, although polyhydrated sulfate (PHS) outcrops are also present nearby. In contrast, only PHS outcrops are currently observed on the Juventae plateau.CRISM spectra with a spectral band at 2.225-2.238 µm were observed at several locations at Aram Chaos. The spectra of these units also contain accompanying features at 1.48, 1.82, 2.19, and 2.37 µm (Fig. 1). Small variations in the ~2.23 µm band are attributed to changes in the Fe-Mg chemistry. Pure FeSO4OH has a band at 2.236 µm, while heated FeMg-MHS has a band at 2.226 µm. The FeSO4OH units at Aram Chaos are typically found adjacent to MHS outcrops (Fig. 2), including both Fe-rich MHS (similar to szomolnokite) with bands near 2.11-2.12 and 2.40 µm and kieserite (MgSO4•H20) with spectral bands near 2.14 and 2.41 µm. Spectra of szomolnokite and kieserite measured at colder, Mars-like temperatures have bands at ~2.11 and 2.14 µm [7], similar to these observations. The MHS spectral units more consistent with kieserite are darker than the szomolnokite-like MHS units and are covered by debris and ripples (Fig. 2C). Some of the MHS units at Aram Chaos may have formerly been mixtures of szomolnokite and kieserite, where the szomolnokite transformed to FeSO4OH and the kieserite remained. Alternatively, polyhydrated Fe and Mg sulfates may have been present that altered to form FeSO4OH, szomolnokite, and kieserite, depending on variations in the geochemistry. The reaction to form FeSO4OH proceeds as Fe2+ in szomolnokite is oxidized to Fe3+ while the H2O loses a proton to form OH. Some of the MHS outcrops include weak bands near 2.23 µm, indicating partial alteration to form a mixed phase containing some MHS and some FeSO4OH (Fig. 3). The PHS spectra contain bands near 1.44 and 1.93-1.95 µm and a drop in reflectance near 2.42 µm (Fig. 3), similar to spectra of rozenite (FeSO4•4H20) and starkeyite (MgSO4•4H20).Spectra at the Juventae plateau were collected from thin light-toned layered deposits, including spectral signatures due to PHS and FeSO4OH, and pyroxene-bearing units (Figs. 3-4). The stratigraphy of the outcrops shows a pyroxene-bearing substrate below the light-toned layered materials and a different pyroxene-bearing caprock unit covering the Fe sulfates (Fig. 4). Thin units containing spectral features consistent with PHS (blue) and FeSO4OH (red) are observed, and some of these thin units include spectral features due to both materials. Morphologies of these primary four units are displayed in Fig. 5. The pyroxene bearing substrate (dark cyan) is flatter with extensive polygonal fracturing, whereas the pyroxene-bearing caprock (green) is partially covered by ripples and appears hilly and uneven in topography due to differential erosion. The textures of the PHS- and FeSO4OH-bearing units are distinct from those of the pyroxene-bearing units, but appear related to each other with fine-scale layering that varies in brightness, color, and fracturing.The presence of highly pure FeSO4OH outcrops neighboring MHS at Aram Chaos and less pure outcrops of FeSO4OH neighboring PHS on the plateau NW of Juventae Chasma indicate an active geochemical history in Mars’ past. The hydrated sulfates likely formed in evaporative environments, while the FeSO4OH likely formed through heating. The FeSO4OH-bearing units at the Juventaue plateau could be mixed with spectrally neutral components that dilute the FeSO4OH spectral features. Coordinated characterization of the near-infrared (NIR) and mid-IR spectral features of Fe sulfates (Fig. 6) is enabling a better understanding of the spectral features due to FeSO4OH in these intriguing outcrops on Mars.Acknowledgements: The authors are grateful for support from NASA MDAP #80NSSC21K1103, NASA SSW #80NSSC23K0032, Austrian Science Fund FWF #P34227-N, and Europlanet Transnational Access funds.References: [1] Bishop J.L. et al. (2009) Mineralogy of Juventae Chasma…, JGR, 114, doi:10.1029/2009JE003352. [2] Lichtenberg K. A. et al. (2010) Stratigraphy of hydrated sulfates in the sedimentary deposits of Aram Chaos, Mars, JGR, 115,...
- 1 January 2024
- Published by Springer Nature
- p. 5-50
Mars in Short: Past and Present Geology and Climate
- 1 January 2024
- Published by Springer Nature
- p. 5-50
Mars in Short: Past and Present Geology and Climate
- 1 January 2024
- Published by Springer Nature
- p. 253-339
Towards Permanent Settlements on Mars (from 1000 to 100,000 People)
- 1 January 2024
- Published by Springer Nature
- p. 253-339
Towards Permanent Settlements on Mars (from 1000 to 100,000 People)
- Top Cited Papers
- 5 February 2018
- Published by Springer Nature in Nature Astronomy
- Vol. 2 (3) , 206-213
Surface clay formation during short-term warmer and wetter conditions on a largely cold ancient Mars
The ancient rock record for Mars has long been at odds with climate modelling. The presence of valley networks, dendritic channels and deltas on ancient terrains points towards running water and fluvial erosion on early Mars1, but climate modelling indicates that long-term warm conditions were not sustainable2. Widespread phyllosilicates and other aqueous minerals on the Martian surface3,4,5,6 provide additional evidence that an early wet Martian climate resulted in surface weathering. Some of these phyllosilicates formed in subsurface crustal environments5, with no association with the Martian climate, while other phyllosilicate-rich outcrops exhibit layered morphologies and broad stratigraphies7 consistent with surface formation. Here, we develop a new geochemical model for early Mars to explain the formation of these clay-bearing rocks in warm and wet surface locations. We propose that sporadic, short-term warm and wet environments during a generally cold early Mars enabled phyllosilicate formation without requiring long-term warm and wet conditions. We conclude that Mg-rich clay-bearing rocks with lateral variations in mixed Fe/Mg smectite, chlorite, talc, serpentine and zeolite occurrences formed in subsurface hydrothermal environments, whereas dioctahedral (Al/Fe3+-rich) smectite and widespread vertical horizonation of Fe/Mg smectites, clay assemblages and sulphates formed in variable aqueous environments on the surface of Mars. Our model for aluminosilicate formation on Mars is consistent with the observed geological features, diversity of aqueous mineralogies in ancient surface rocks and state-of-the-art palaeoclimate scenarios.
- 5 February 2018
- Published by Springer Nature in Nature Astronomy
- Vol. 2 (3) , 206-213
Top Cited PapersSurface clay formation during short-term warmer and wetter conditions on a largely cold ancient Mars
The ancient rock record for Mars has long been at odds with climate modelling. The presence of valley networks, dendritic channels and deltas on ancient terrains points towards running water and fluvial erosion on early Mars1, but climate modelling indicates that long-term warm conditions were not sustainable2. Widespread phyllosilicates and other aqueous minerals on the Martian surface3,4,5,6 provide additional evidence that an early wet Martian climate resulted in surface weathering. Some of these phyllosilicates formed in subsurface crustal environments5, with no association with the Martian climate, while other phyllosilicate-rich outcrops exhibit layered morphologies and broad stratigraphies7 consistent with surface formation. Here, we develop a new geochemical model for early Mars to explain the formation of these clay-bearing rocks in warm and wet surface locations. We propose that sporadic, short-term warm and wet environments during a generally cold early Mars enabled phyllosilicate formation without requiring long-term warm and wet conditions. We conclude that Mg-rich clay-bearing rocks with lateral variations in mixed Fe/Mg smectite, chlorite, talc, serpentine and zeolite occurrences formed in subsurface hydrothermal environments, whereas dioctahedral (Al/Fe3+-rich) smectite and widespread vertical horizonation of Fe/Mg smectites, clay assemblages and sulphates formed in variable aqueous environments on the surface of Mars. Our model for aluminosilicate formation on Mars is consistent with the observed geological features, diversity of aqueous mineralogies in ancient surface rocks and state-of-the-art palaeoclimate scenarios.