LRLaura Elvira Serrano de la Rosa

Laura Elvira Serrano de la Rosa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Laura Elvira Serrano de la Rosa has a total of 96 co-authors. Here are the top co-authors by number of shared publications:

  • Ana G. Rodríguez-Hernández

    CONAHCyT-Centro de Nanociencias and Nanotecnología, Universidad Nacional Autónoma de México, Km 107 Carretera Tijuana-Ensenada, Ensenada, Baja California C.P. 22800, México

    3 shared publications
  • Diego Ramírez-Contreras

    Centro de Química del Instituto de Ciencias, Benemérita Universidad Autónoma de Puebla, 18 sur y Av. San Claudio, Col. San Manuel, Puebla 72570, Mexico

    3 shared publications
  • Enrique González-Vergara

    Centro de Química del Instituto de Ciencias, Benemérita Universidad Autónoma de Puebla, 18 sur y Av. San Claudio, Col. San Manuel, Puebla 72570, Mexico

    3 shared publications
  • Fernando Chiñas-Castillo

    Instituto Tecnologico de Oaxaca, Tecnologico Nacional de Mexico, Calz. Tecnologico No. 125, Oaxaca C.P. 68030, Mexico

    3 shared publications
  • Francisco Javier Meléndez

    Lab. de Química Teórica, Centro de Investigación, Depto. de Fisicoquímica, Facultad de Ciencias Químicas, Benemérita Universidad Autónoma de Puebla, Puebla, Mexico

    3 shared publications
  • H. Juárez Santiesteban

    Centro de Investigación en Dispositivos Semiconductores, del Instituto de Ciencias de la Universidad Autónoma de Puebla, Av. 14 Sur Col Jardines de San Manuel, Ciudad Universitaria, Puebla, Pue., Mexico

    3 shared publications

Latest Publications

  • Open Access

    Unexpected Neocuproine Compounds in the Search for Casiopeina®-like Complexes

    by Diego Ramírez-Contreras, Laura E. Serrano-De la Rosa, Maura Cárdenas García, Francisco J. Melendez, María Eugenia Castro, Enrique González-Vergara

    The family of diimine-type copper(II) ternary complexes consists of many molecules, with more than 9000 crystallographic reports in the CCDC. Their proven anticancer properties largely explain this interest. Although most of the same type of ternary complexes share a general structure, there are cases in which this rule is fulfilled in unusual ways. As part of our study on the relationship between the structure of secondary ligands and the biological activity of Casiopeina-like complexes, we introduce four neocuproine–copper(II) ternary complexes, using the amino acids glycine, glutamine, glutamic acid and arginine, that show unique structural features compared to other mixed complexes. The compounds were synthesized, crystallized, and described using UV-Vis, infrared, and Raman spectroscopy, together with single-crystal X-ray diffraction. Computational studies were also carried out. The optimized structures were obtained using the mPW1PW91 method with the 6-311G(d) basis set for carbon, oxygen, nitrogen, and chlorine; the 6-31G basis set for hydrogen atoms; and the Watchers + f (VDZP) basis set for the copper atom in solution with the CPCM implicit model in water solvents. Hirshfeld surfaces, QTAIM, and NCI-RDG analyses were used to examine non-covalent interactions. The distorted pentacoordinate structure of the compounds alters their redox activity, making their cytotoxicity worth pursuing.

  • Open Access

    Review of Silicon-Based Nanomaterials Fabricated via Laser Microstructuring, Electrochemical Etching, and Hybrid Microstructures: Exploring Functional Integration and Future Applications

    by Luis Humberto Robledo-Taboada, Fernando Chiñas-Castillo, Magdaleno Caballero-Caballero, Rafael Alavez-Ramírez, Jesica Ariadna Jiménez-Mendoza, José Raúl Pérez-Higareda, Irving Néstor Sierra-Sánchez, Reynier Suárez Martínez, Laura Elvira Serrano de la Rosa

    This review examines silicon surfaces produced by femtosecond laser microstructuring and electrochemical etching, as well as their sequential integration. Laser processing creates multiscale topographies, including laser-induced periodic surface structures (LIPSS), conical features, and craters, whereas electrochemical etching generates porous silicon with tunable pore dimensions and high surface area. The central focus is the process coupling between these techniques: how laser-generated topography, defects, and modified surface chemistry may influence subsequent electrochemical dissolution, and how etching, in turn, may alter the stability and wetting of the laser-defined architecture. Available studies demonstrate substantial changes in morphology, roughness, and contact angle after sequential processing, but do not yet establish universal synergistic enhancement or self-cleaning performance. Accordingly, this review distinguishes experimentally demonstrated process-integration effects from mechanistic hypotheses and future design targets. It also evaluates evidence limitations related to durability, mechanical stability, scalability, reference accuracy, and application-specific validation, with particular attention to conceptual sensing platforms based on hierarchical silicon surfaces.

  • Open Access

    Role of Surface Charge in the Speciation and Photocatalytic Degradation of 4-Nitrophenol Using ZnO–CeO2–WO3 Photocatalysts

    by Alma Rosa Alejandro-López, Laura Elvira Serrano de la Rosa, Sandra Leticia Castillejos-Mosqueda, Gerardo E. Córdova-Pérez, Jorge R. Cerna-Cortez, Claudia M. Gómez, Adib Abiu Silahua-Pavón, Rafael Omar Saavedra-Díaz, Srinivas Godavarthi, Adrián Cervantes-Uribe

    Understanding how the surface charge environment governs pollutant–catalyst interactions is essential for designing efficient photocatalysts. In this study, ZnO–CeO2–WO3 composite materials were synthesized through a simplex-centroid mixture design to evaluate their photocatalytic activity toward the degradation of 4-nitrophenol (4-NPOH) under UV irradiation. The materials were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), UV–Vis diffuse reflectance spectroscopy (DRS), photoluminescence (PL), nitrogen adsorption–desorption (BET/DFT) and scanning electron microscopy (SEM). Photocatalytic experiments were conducted without pH adjustment to analyze the intrinsic behavior of each oxide and their mixtures. The acid–base equilibrium of 4-NPOH (pKa = 7.2) allowed evaluating its deprotonation to 4-nitrophenolate (4-NP−) and its interaction with the catalyst surface, which depends on the point of zero charge (pHPzc) of ZnO, CeO2, and WO3. The Zn–W binary system (ZnWO4 phase) exhibited the highest activity, achieving 81% degradation efficiency and the largest apparent rate constant (k = 5.1 × 10−3 min−1). However, a 51% decrease in activity was observed after three reuse cycles, attributed to WO3 leaching induced by the interaction between 4-NPO− and zinc tungstate hydroxide (Zn[W(OH)8]). This work establishes a direct correlation between surface charge, pollutant speciation, and photocatalytic performance, providing a mechanistic framework for understanding pH-dependent degradation processes over multicomponent oxide composites.


  • Open Access

    Mechanically Flexible, Large-Area Fabrication of Three-Dimensional Dendritic Au Films for Reproducible Surface-Enhanced Raman Scattering Detection of Nanoplastics

    by Rafael Villamil Carreón, Ana G. Rodríguez-Hernández, Laura Elvira Serrano de la Rosa, José Juan Gervacio-Arciniega, Siva Kumar Krishnan

    The escalating crisis of nanoplastic pollution in water and food products demands the development of novel methodologies for detection and recycling. Despite various techniques available, surface-enhanced Raman scattering (SERS) is emerging as a highly efficient technique for the trace detection of micro/nanoplastics. However, the development of highly reproducible and stable, flexible SERS substrates that can be used for sensitive detection in environmental medium remains a challenge. Here, we report a fabrication of large-area, three-dimensional (3D), and highly flexible SERS substrate based on porous dendritic Au films onto a flexible indium tin oxide (ITO) substrate via facile, thermal evaporation of Au over the vacuum-compatible deep eutectic solvent (DES)-coated glass substrate and subsequent direct transfer process. The as-fabricated 3D dendritic Au/ITO flexible substrates can be used for ultrasensitive SERS detection of crystal violet (CV) as probe analyte molecules with the limit of detection (LOD) as low as 6.4 × 10-15 M, with good signal reproducibility (RSD of 11.3%). In addition, the substrate showed excellent sensitivity in detecting nanoplastics such as poly(ethylene terephthalate) (200 nm) and polystyrene (100 nm) with LODs reaching up to 0.051 and 8.2 μg/mL, respectively. This work provides a facile approach for the preparation of highly flexible plasmonic substrates, showing great potential for the SERS detection of a variety of environmental pollutants.


  • Open Access

    Thermal Performance of Novel Eco-Friendly Prefabricated Walls for Thermal Comfort in Temperate Climates

    by Rafael Alavez-Ramirez, Fernando Chiñas-Castillo, Jacobo Martínez-Reyes, Jose Luis Caballero-Montes, Magdaleno Caballero-Caballero, Valentin Juventino Morales-Dominguez, Margarito Ortiz-Guzman, Luis Humberto Robledo-Taboada, Erick Adrian Juarez-Arellano, Laura Elvira Serrano-De la Rosa

    The global threat of climate change has become increasingly severe, with the efficiency of buildings and the environment being significantly impacted. It is necessary to develop bioclimatic architectural systems that can effectively reduce energy consumption while bringing thermal comfort, reducing the impact of external temperatures. This study presents the results of a real-scale experimental house prototype, MHTITCA, using a unique design composed of novel eco-friendly prefabricated channel walls filled with a blend of soil, sawdust, and cement for walls and roofs. The experimental analysis performed in this study was based on dynamic climatology. A solar orientation chart of the place was constructed to identify the solar radiation intensity acting on the house. Measurements of roof surface temperatures were conducted to determine temperature damping and temperature wave lag. Monthly average temperature and direct solar radiation data of the site were considered. Compared to other alternative house prototypes, the system maximizes thermal comfort in high-oscillation temperate climates. Temperature measurements were taken inside and outside to evaluate the thermal performance. A thermal insulating layer was added outside the wall and the envelope to improve the prototype’s thermal comfort and reduce the decrement factor even more. This MHTITCA house prototype had 85% thermal comfort, 0% overheating, and 15% low heating. This eco-friendly prototype design had the best thermal performance, achieving a thermal lag of twelve hours, a reduced decrement factor of 0.109, and preventing overheating in areas with high thermal fluctuations. Comparatively, the other prototypes examined provided inferior thermal comfort. The suggested MHTITCA system can be an energy-saving and passive cooling option for thermal comfort in low-cost houses in temperate climates with high thermal oscillations in urban or rural settings.


  • Open Access

    A Scalable Synthesis of Ag Nanoporous Film As an Efficient SERS-Substrates for Sensitive Detection of Nanoplastics

    by Rafael Villamil Carreón, Ana G. Rodríguez-Hernández, Laura E. Serrano de la Rosa, Ma. Estela Calixto, J.J. Gervacio-Arciniega, Siva Kumar Krishnan

    Nanoplastics pollution has led to a severe environmental crisis because of a large accumulation of these smaller nanoplastic particles in the aquatic environment and atmospheric conditions. Detection of these nanoplastics is crucial for food safety monitoring and human health. In this work, we report a simple and eco-friendly method to prepare a SERS-substrate-based nanoporous Ag nanoparticle (NP) film through vacuum thermal evaporation onto a vacuum-compatible deep eutectic solvent (DES) coated growth substrate for quantitative detection of nanoplastics in environmental samples. The nanoporous Ag NP films with controlled pores were achieved by the soft-templating role of DESs over the growth substrate, which enabled the self-assembly of deposited Ag NPs over the surface of DES. The optimized nanoporous Ag substrate provides high sensitivity in the detection of analyte molecules, crystal violet (CV), and rhodamine 6G (R6G) with a limit of detection (LOD) up to 1.5 × 10-13 M, excellent signal reproducibility, and storage stability. Moreover, we analyzed quantitative SERS detection of polyethene terephthalate (PET, size of 200 nm) and polystyrene (PS, size of 100 nm) nanoplastics with an LOD of 0.38 and 0.98 μg/mL, respectively. In addition, the SERS substrate efficiently detects PET and PS nanoplastics in real environmental samples, such as tap water, lake water, and diluted milk. The enhanced SERS sensing ability of the proposed nanoporous Ag NP film substrate holds immense potential for the sensitive detection of various nanoplastic contaminants present in environmental water.


  • Open Access

    Ionic Liquid-Assisted Thermal Evaporation of Bimetallic Ag–Au Nanoparticle Films as a Highly Reproducible SERS Substrate for Sensitive Nanoplastic Detection in Complex Environments

    by Rafael V. Carreón, Orlando Cortázar-Martínez, Ana G. Rodríguez-Hernández, Laura E. Serrano de la Rosa, José Juan Gervacio-Arciniega, Siva Kumar Krishnan

    Nanoplastic particles are emerging as an important class of environmental pollutants in the atmosphere that have adverse effects on our ecosystems and human health. While many methods have been developed to quantitatively detect nanoplastics; however, sensitive detection at low concentrations in a complex environment remains elusive. Herein, we demonstrate a greener method to fabricate a surface-enhanced Raman spectroscopy (SERS) substrate consisting of self-assembled plasmonic Ag-Au bimetallic nanoparticle (NP) films for quantitative SERS detection of nanoplastics in complex media. The self-assembly of Ag-Au bimetallic NPs was achieved through thermal evaporation onto a vapor-phase compatible ionic liquid based on deep eutectic solvent over the growth substrate. The finite-difference time-domain simulation revealed that the localized field enhancement is strong in the gaps, which generate uniform SERS "hotspots" in the obtained substrate. Benefiting from highly accessible SERS "hotspots" at the gaps, the SERS substrate exhibits excellent sensitivity for detecting crystal violet with a limit of detection (LOD) as low as 10-14 M and excellent reproducibility (RSD of 5.8%). The SERS substrate is capable of detecting PET nanoplastics with LOD as low as 1 μg/mL and about 100 μg/mL in real samples such as tap water, lake water, diluted milk, and wine. Moreover, we also validated the feasibility of the designed SERS substrate for the practical detection of PET nanoplastics collected from commercial drinking water bottles, and it showed great potential applications for sensitive detection in actual environments.


  • Open Access

    Relationship between the polymerization distance of monowave and polywave light-curing units and the irradiance and physical properties of dental resin-based composites

    by Madelin Ruiz-Peñarrieta, María de Los Angeles Moyaho-Bernal, José A. Salazar-Vergara, Juana P. Ramírez Ortega, Laura E. Serrano de la Rosa, Jacqueline A. Rodríguez-Chávez, Abigailt Flores-Ledesma

    Purpose: To evaluate the influence of the polymerization distance of monowave and polywave light curing units (LCUs) on the measured irradiance relative to the value reported by the manufacturer in relation to the physical properties of resin-based composites (RBCs).Methods: Four LCUs were used: one monowave and three polywave. The irradiance was measured with a digital radiometer. Depth of cure (DC) and flexural strength (FS) tests were performed according to ISO 4049:2019 at polymerization distances of 0 mm and 5 mm.Results: The irradiance of all LCUs was higher than that reported by the manufacturer (>25-64%). The irradiance of the four LCUs was reduced when polymerization was performed at between 0 to 5 mm (paired t-test, P < 0.001). The DC at 0 mm was similar in all groups but was significantly decreased at 5 mm distance (ANOVA P < 0.001). FS showed differences among the LCUs at 0 mm (ANOVA P < 0.001) and was affected by the polymerization distance. The elastic modulus was unaffected by the LCU used or the distance (ANOVA P > 0.001).Conclusions: The LCU must be positioned as near as possible to RBCs during the polymerization process, as increased distance negatively affects the depth of cure and flexural strength.


  • Study of physical properties of cold welding epoxy matrix with polypyrrole inclusions

    by Juan José Reyes Salgado, Pablo Marco Trejo García, Laura Elvira Serrano de la Rosa, Emmanuel Eduardo Huelitl Ocelotl