Charles Cornet
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Charles Cornet has a total of 445 co-authors. Here are the top co-authors by number of shared publications:
- Jacky Even
Univ Rennes, INSA Rennes, CNRS, Institut FOTON - UMR 6082, Rennes, France
57 shared publications - Laurent Pedesseau
Univ Rennes, INSA Rennes, CNRS, Institut FOTON-UMR 6082, F-35000 Rennes, France
38 shared publications - Nicolas Bertru
Univ Rennes, INSA Rennes, CNRS, Institut FOTON – UMR 6082, F-35000 Rennes, France
37 shared publications O. Durand
Univ Rennes, INSA Rennes, CNRS, Institut FOTON, UMR 6082, Rennes, 35000, France
32 shared publicationsA. Le Corre
Univ Rennes, INSA Rennes, CNRS, Institut FOTON – UMR 6082, F-35000 Rennes, France
28 shared publicationsS. Loualiche
25 shared publications
Latest Publications
- Open Access
- 26 September 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (19) , e71110
The Role of Morphology and Phase Engineering in Molybdenum Sulfide for Robust Photoelectrochemical Hydrogen Evolution on III–V Photoelectrodes
Solar‐driven hydrogen production via photoelectrochemical (PEC) water splitting offers a direct route to decarbonized fuels without grid dependence. Although III–V semiconductors exhibit exceptional optoelectronic properties, their reliance on platinum group cocatalysts limits scalability. Here, we report a platinum group metal‐free (PGM‐free) hybrid photocathode integrating an epitaxially grown GaAs/Si:p junction with mixed‐phase MoS 2 nanostructures for efficient hydrogen evolution in acidic media. Through systematic control of morphology, crystallinity, and phase composition, we demonstrate that 1T′‐rich MoS 2 nanoflowers outperform exfoliated nanosheets, bulk 2H‐MoS 2 , and amorphous powder MoS x . The nanoflower architecture delivers higher saturation photocurrent densities and a positive shift in onset potential, attributed to enhanced charge transport, catalytic kinetics, and light penetration, while simultaneously improving stability. Notably, the hierarchical nanoflower morphology and 1T′ phase synergistically enhance photocurrent performance. The optimized GaAs/Si:p photocathodes modified with MoS 2 nanoflowers exhibit stable operation with a Faradaic efficiency of ~97% for hydrogen evolution. These findings establish morphology‐phase synergy as a critical design principle for developing PGM‐free PEC systems, paving the way for cost‐effective solar fuel production.
- 26 September 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (19) , e71110
Open AccessThe Role of Morphology and Phase Engineering in Molybdenum Sulfide for Robust Photoelectrochemical Hydrogen Evolution on III–V Photoelectrodes
Solar‐driven hydrogen production via photoelectrochemical (PEC) water splitting offers a direct route to decarbonized fuels without grid dependence. Although III–V semiconductors exhibit exceptional optoelectronic properties, their reliance on platinum group cocatalysts limits scalability. Here, we report a platinum group metal‐free (PGM‐free) hybrid photocathode integrating an epitaxially grown GaAs/Si:p junction with mixed‐phase MoS 2 nanostructures for efficient hydrogen evolution in acidic media. Through systematic control of morphology, crystallinity, and phase composition, we demonstrate that 1T′‐rich MoS 2 nanoflowers outperform exfoliated nanosheets, bulk 2H‐MoS 2 , and amorphous powder MoS x . The nanoflower architecture delivers higher saturation photocurrent densities and a positive shift in onset potential, attributed to enhanced charge transport, catalytic kinetics, and light penetration, while simultaneously improving stability. Notably, the hierarchical nanoflower morphology and 1T′ phase synergistically enhance photocurrent performance. The optimized GaAs/Si:p photocathodes modified with MoS 2 nanoflowers exhibit stable operation with a Faradaic efficiency of ~97% for hydrogen evolution. These findings establish morphology‐phase synergy as a critical design principle for developing PGM‐free PEC systems, paving the way for cost‐effective solar fuel production.
- 20 July 2026
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 10 (7) , 073804
Direct orientation contrast imaging of antiphase domains on III-V materials using scanning electron microscopy
Direct orientation contrast imaging of zinc-blende III-V materials is studied using scanning electron microscopy. A quantitative approach is taken using a 3 \textmu{}m thick orientation-patterned GaP grown on a GaAs sample, studying the antiphase domain contrast with respect to the electron beam energy and the tilt angle. A qualitative approach is taken for III-V grown on nonpolar materials with and without chemical mechanical polishing. Finally, a processing of the acquired image for GaP on Si reveals in-plane preferential antiphase boundaries.
- 20 July 2026
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 10 (7) , 073804
Direct orientation contrast imaging of antiphase domains on III-V materials using scanning electron microscopy
Direct orientation contrast imaging of zinc-blende III-V materials is studied using scanning electron microscopy. A quantitative approach is taken using a 3 \textmu{}m thick orientation-patterned GaP grown on a GaAs sample, studying the antiphase domain contrast with respect to the electron beam energy and the tilt angle. A qualitative approach is taken for III-V grown on nonpolar materials with and without chemical mechanical polishing. Finally, a processing of the acquired image for GaP on Si reveals in-plane preferential antiphase boundaries.
- 1 July 2026
- Published by Societe Chimique de France
- Vol. 516-517, 40-47
Semiconducteurs pour les cellules photovoltaïques et photoélectrochimiques
(Text in French) Semiconductors for photovoltaic and photoelectrochemical cells. The development of stable and efficient photoelectrochemical and photovoltaic cells benefits from the creation of new photoactive layers based on semiconductor materials and a detailed understanding of their physicochemical properties. This article aims to highlight the research conducted at ISCR in this field and related collaborative efforts. Topics covered will include photovoltaic solar cells based on halogenated perovskites as well as antimony triselenide, the design of photoelectrodes (photoanodes and photocathodes) through the assembly of inorganic molecular nanoclusters, and photoelectrodes based on silicon or III-V semiconductors epitaxially grown on silicon for water photoelectrolysis.
- 1 July 2026
- Published by Societe Chimique de France
- Vol. 516-517, 40-47
Semiconducteurs pour les cellules photovoltaïques et photoélectrochimiques
(Text in French) Semiconductors for photovoltaic and photoelectrochemical cells. The development of stable and efficient photoelectrochemical and photovoltaic cells benefits from the creation of new photoactive layers based on semiconductor materials and a detailed understanding of their physicochemical properties. This article aims to highlight the research conducted at ISCR in this field and related collaborative efforts. Topics covered will include photovoltaic solar cells based on halogenated perovskites as well as antimony triselenide, the design of photoelectrodes (photoanodes and photocathodes) through the assembly of inorganic molecular nanoclusters, and photoelectrodes based on silicon or III-V semiconductors epitaxially grown on silicon for water photoelectrolysis.
- 30 June 2026
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 10 (6)
The impact of interfacial chemistry on the band offset of GaAs/ G a 2 O 3 heterostructures
- 30 June 2026
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 10 (6)
The impact of interfacial chemistry on the band offset of GaAs/ G a 2 O 3 heterostructures
- Open Access
- 17 June 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (55) , e76551
Bandgap‐Engineered AlGaAs/GaAs Heterostructures for Wavelength‐Selective Dual‐Polarity Photoelectrochemistry
Bandgap engineering provides a powerful route to design light–matter interactions and enable wavelength‐dependent functionalities in semiconductor photoelectrodes. Here, we report a bandgap‐engineered p‐Al 0.4 Ga 0.6 As/n‐GaAs heterostructure that exhibits pronounced wavelength‐selective dual‐polarity photoelectrochemical response. High‐quality epitaxy establishes a well‐defined junction with a built‐in electric field that governs carrier separation across the heterointerface. Under short‐wavelength illumination (λ<614 nm), photon absorption in the AlGaAs layer combined with downward band bending at the p‐AlGaAs/electrolyte interface drives electrons toward the surface, yielding a photocathodic response. In contrast, longer‐wavelength photons (614‐873 nm) penetrate the AlGaAs layer and are absorbed in the GaAs substrate, where photogenerated holes are transported across the heterointerface toward the surface by the built‐in electric field, giving rise to a photoanodic response. Incident photon‐to‐current efficiency spectra and monochromatic illumination experiments provide direct evidence for this band‐ and field‐selective polarity switching. Electrolyte‐dependent studies further reveal that surface chemistry critically governs anodic charge transfer and stability. By elucidating the coupled roles of optical absorption, band alignment, built‐in electric fields, and interfacial surface chemistry, this work establishes a physics‐encoded and designable platform for wavelength‐controlled functional switching, where anodic and cathodic processes are spatially and energetically decoupled, offering new opportunities for optical logic, adaptive photoelectrochemical systems, and spectrally encoded energy conversion.
- 17 June 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (55) , e76551
Open AccessBandgap‐Engineered AlGaAs/GaAs Heterostructures for Wavelength‐Selective Dual‐Polarity Photoelectrochemistry
Bandgap engineering provides a powerful route to design light–matter interactions and enable wavelength‐dependent functionalities in semiconductor photoelectrodes. Here, we report a bandgap‐engineered p‐Al 0.4 Ga 0.6 As/n‐GaAs heterostructure that exhibits pronounced wavelength‐selective dual‐polarity photoelectrochemical response. High‐quality epitaxy establishes a well‐defined junction with a built‐in electric field that governs carrier separation across the heterointerface. Under short‐wavelength illumination (λ<614 nm), photon absorption in the AlGaAs layer combined with downward band bending at the p‐AlGaAs/electrolyte interface drives electrons toward the surface, yielding a photocathodic response. In contrast, longer‐wavelength photons (614‐873 nm) penetrate the AlGaAs layer and are absorbed in the GaAs substrate, where photogenerated holes are transported across the heterointerface toward the surface by the built‐in electric field, giving rise to a photoanodic response. Incident photon‐to‐current efficiency spectra and monochromatic illumination experiments provide direct evidence for this band‐ and field‐selective polarity switching. Electrolyte‐dependent studies further reveal that surface chemistry critically governs anodic charge transfer and stability. By elucidating the coupled roles of optical absorption, band alignment, built‐in electric fields, and interfacial surface chemistry, this work establishes a physics‐encoded and designable platform for wavelength‐controlled functional switching, where anodic and cathodic processes are spatially and energetically decoupled, offering new opportunities for optical logic, adaptive photoelectrochemical systems, and spectrally encoded energy conversion.
- Open Access
- 30 April 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (10) , 3966-3974
Kinetic Monte Carlo Simulations of Antiphase Domains Burial during MBE Growth of GaAs on (001) Si
- 30 April 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (10) , 3966-3974
Open AccessKinetic Monte Carlo Simulations of Antiphase Domains Burial during MBE Growth of GaAs on (001) Si
- 9 March 2026
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 10 (3) , L030401
Ab initio modeling of morphology with experimental comparison in a nanoscale heterostructure
Here, we propose a comprehensive first-principles atomistic approach to predict the Wulff-Kaischew equilibrium shape of crystals heterogeneously integrated on a dissimilar material. This method uses both reconstructed surface and interface absolute energies, as determined by density functional theory, to infer the morphology and wetting properties of Volmer-Weber islands over the whole range of accessible chemical potentials. The predicted equilibrium shapes of GaP crystals heterogeneously grown on Si are found to be in good agreement with experimental observations performed by transmission electron microscopy. This method provides a tool for optimization of heterostructured, multifunctional, and smart materials and devices.
- 9 March 2026
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 10 (3) , L030401
Ab initio modeling of morphology with experimental comparison in a nanoscale heterostructure
Here, we propose a comprehensive first-principles atomistic approach to predict the Wulff-Kaischew equilibrium shape of crystals heterogeneously integrated on a dissimilar material. This method uses both reconstructed surface and interface absolute energies, as determined by density functional theory, to infer the morphology and wetting properties of Volmer-Weber islands over the whole range of accessible chemical potentials. The predicted equilibrium shapes of GaP crystals heterogeneously grown on Si are found to be in good agreement with experimental observations performed by transmission electron microscopy. This method provides a tool for optimization of heterostructured, multifunctional, and smart materials and devices.
- Open Access
- 10 October 2025
- Published by Wiley in ChemElectroChem
- Vol. 12 (21)
Solar Hydrogen Production with Metal/III–V Semiconductor Junction Monolithically Integrated on Si
GaAs is an excellent candidate for high‐performance photoelectrochemical water splitting due to its appropriate band‐edge and bandgap energies, as well as its excellent transport properties. The most significant limitations of GaAs for photoelectrochemical applications are its instability against corrosion, the high substrate cost, and the huge overpotentials required for triggering water electrolysis. The monolithic epitaxial integration of GaAs thin films directly on the Earth‐abundant Si fundamentally limits the costs associated with the substrate fabrication. Herein, photocathodes made of 1 µm thick GaAs layers epitaxially grown on p‐doped Si substrates are developed and their performances are compared to those of bare p‐doped GaAs electrodes. Sulfur passivation and standard interfacing with Pt catalyst are applied and analyzed for both series of photocathodes. A massive onset potential shift of 0.63 V is demonstrated for GaAs/Si photocathodes after electroless Pt deposition and sulfur passivation, reaching an onset potential of 0.4 V versus the reversible hydrogen electrode. The stability of the Pt/GaAs/Si photocathode is finally assessed over more than 112 h. These findings are essential for further development toward the fabrication of cost‐efficient and stable unassisted photoelectrochemical cells for green hydrogen production.
- 10 October 2025
- Published by Wiley in ChemElectroChem
- Vol. 12 (21)
Open AccessSolar Hydrogen Production with Metal/III–V Semiconductor Junction Monolithically Integrated on Si
GaAs is an excellent candidate for high‐performance photoelectrochemical water splitting due to its appropriate band‐edge and bandgap energies, as well as its excellent transport properties. The most significant limitations of GaAs for photoelectrochemical applications are its instability against corrosion, the high substrate cost, and the huge overpotentials required for triggering water electrolysis. The monolithic epitaxial integration of GaAs thin films directly on the Earth‐abundant Si fundamentally limits the costs associated with the substrate fabrication. Herein, photocathodes made of 1 µm thick GaAs layers epitaxially grown on p‐doped Si substrates are developed and their performances are compared to those of bare p‐doped GaAs electrodes. Sulfur passivation and standard interfacing with Pt catalyst are applied and analyzed for both series of photocathodes. A massive onset potential shift of 0.63 V is demonstrated for GaAs/Si photocathodes after electroless Pt deposition and sulfur passivation, reaching an onset potential of 0.4 V versus the reversible hydrogen electrode. The stability of the Pt/GaAs/Si photocathode is finally assessed over more than 112 h. These findings are essential for further development toward the fabrication of cost‐efficient and stable unassisted photoelectrochemical cells for green hydrogen production.
- 28 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (36) , 16308-16318
Computational Assessment of Nonpolar and Polar GaP Terminations for Photoelectrochemical Water Splitting
- 28 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (36) , 16308-16318
Computational Assessment of Nonpolar and Polar GaP Terminations for Photoelectrochemical Water Splitting
- Open Access
- 1 July 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (14) , 29239-29246
High efficiency second harmonic generation in transverse orientation patterned gallium phosphide waveguides
Achieving high conversion efficiencies in second-order nonlinear optical processes is a key challenge in integrated photonics for both classical and quantum applications. This paper presents what we believe is the first demonstration of transverse orientation-patterned gallium phosphide (TOP-GaP) waveguides showing high-efficiency second harmonic generation. In such devices, first-order modal phase matching is unlocked and optimized through the inversion of the nonlinear susceptibility along the vertical direction. We discuss here the theory behind modal phase matching in TOP structures, describe the fabrication process, and present linear and nonlinear characterizations of the TOP-GaP waveguides.
- 1 July 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (14) , 29239-29246
Open AccessHigh efficiency second harmonic generation in transverse orientation patterned gallium phosphide waveguides
Achieving high conversion efficiencies in second-order nonlinear optical processes is a key challenge in integrated photonics for both classical and quantum applications. This paper presents what we believe is the first demonstration of transverse orientation-patterned gallium phosphide (TOP-GaP) waveguides showing high-efficiency second harmonic generation. In such devices, first-order modal phase matching is unlocked and optimized through the inversion of the nonlinear susceptibility along the vertical direction. We discuss here the theory behind modal phase matching in TOP structures, describe the fabrication process, and present linear and nonlinear characterizations of the TOP-GaP waveguides.