Liwei Zhuang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Liwei Zhuang has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Zhen-Liang Xu
State Key Laboratory of Chemical Engineering, Membrane Science and Engineering R&D Lab, Chemical Engineering Research Center, School of Chemical Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China
8 shared publications Gance Dai
School of Chemical Engineering East China University of Science and Technology Shanghai China
6 shared publications- Michael Tsapatsis
Institute for NanoBioTechnology & Department of Chemical and Biomolecular Engineering Johns Hopkins University Baltimore Maryland USA
6 shared publications - Dennis T. Lee
Department of Chemical and Biomolecular Engineering & Institute for NanoBioTechnology Johns Hopkins University 3400 N. Charles Street Baltimore MD 21218 USA
4 shared publications Huihui Ping
School of Chemical Engineering East China University of Science and Technology Shanghai China
4 shared publicationsPeter Corkery
Department of Chemical and Biomolecular Engineering and Institute for NanoBio Technology Johns Hopkins University Baltimore Maryland USA
3 shared publications
Latest Publications
- Open Access
- 21 September 2026
- Published by Springer Nature in Bioresources and Bioprocessing
- Vol. 13 (1) , 139
Enhanced production of phomapyrrolidone a through culture-condition optimization and morphological regulation in Didymella sp. FATR0054
Phomapyrrolidone A (Ppd A) is a hirsutellone-type macrocyclic alkaloid derived from marine fungi, exhibiting significant activity against triple-negative b
- 21 September 2026
- Published by Springer Nature in Bioresources and Bioprocessing
- Vol. 13 (1) , 139
Open AccessEnhanced production of phomapyrrolidone a through culture-condition optimization and morphological regulation in Didymella sp. FATR0054
Phomapyrrolidone A (Ppd A) is a hirsutellone-type macrocyclic alkaloid derived from marine fungi, exhibiting significant activity against triple-negative b
- Open Access
kinetic Monte Carlo Multiscale Simulation of Atomic Layer Deposition in High-Aspect-Ratio Nanochannels
Atomic layer deposition (ALD) has become a versatile technique for atomic-level material synthesis and surface modification, with broad relevance in applications such as energy storage devices, integrated circuits, and membranes. The deposition is governed by a multitude of factors spanning multiple length/time scales, ranging from macroscopic transport phenomena to atomistic surface reactions. Owing to the intricate process coupling across these scales, a comprehensive evaluation of atomistic behavior under flow conditions remains highly challenging. To address this issue, a multiscale integrated simulation framework is developed in which precursor transport within high-aspect-ratio nanochannels is explicitly simulated using a finite volume method (FVM) and subsequently coupled with kinetic Monte Carlo (kMC) simulations to evaluate film growth characteristics. Based on the FVM results, the spatiotemporal distribution of precursor partial pressures along nanochannels is extracted and employed as input for a lattice-based kMC model, enabling atomistic resolution of the ALD process over the full deposition cycle. By coupling these two scales, key deposition metrics including step coverage and its temporal evolution under varying partial pressure conditions are quantitatively obtained, together with atomic-level smoothness and vacancy ratio. The kMC simulations further enable detailed visualization of film growth behavior on substrates under different precursor partial pressure environments. The results indicate that, within the microstructure, even when the overall precursor exposure is comparable, films formed near the entrance exhibit superior surface structure, as evidenced by higher atomic-level smoothness and reduced vacancy ratio, compared to those at the bottom. This study provides an engineering-feasible framework for evaluating atomistic film properties in ALD processes by consistently integrating fluid transport and surface reaction kinetics.
Open Accesskinetic Monte Carlo Multiscale Simulation of Atomic Layer Deposition in High-Aspect-Ratio Nanochannels
Atomic layer deposition (ALD) has become a versatile technique for atomic-level material synthesis and surface modification, with broad relevance in applications such as energy storage devices, integrated circuits, and membranes. The deposition is governed by a multitude of factors spanning multiple length/time scales, ranging from macroscopic transport phenomena to atomistic surface reactions. Owing to the intricate process coupling across these scales, a comprehensive evaluation of atomistic behavior under flow conditions remains highly challenging. To address this issue, a multiscale integrated simulation framework is developed in which precursor transport within high-aspect-ratio nanochannels is explicitly simulated using a finite volume method (FVM) and subsequently coupled with kinetic Monte Carlo (kMC) simulations to evaluate film growth characteristics. Based on the FVM results, the spatiotemporal distribution of precursor partial pressures along nanochannels is extracted and employed as input for a lattice-based kMC model, enabling atomistic resolution of the ALD process over the full deposition cycle. By coupling these two scales, key deposition metrics including step coverage and its temporal evolution under varying partial pressure conditions are quantitatively obtained, together with atomic-level smoothness and vacancy ratio. The kMC simulations further enable detailed visualization of film growth behavior on substrates under different precursor partial pressure environments. The results indicate that, within the microstructure, even when the overall precursor exposure is comparable, films formed near the entrance exhibit superior surface structure, as evidenced by higher atomic-level smoothness and reduced vacancy ratio, compared to those at the bottom. This study provides an engineering-feasible framework for evaluating atomistic film properties in ALD processes by consistently integrating fluid transport and surface reaction kinetics.
- 22 June 2026
- Published by Wiley in AIChE Journal
- Vol. 72 (10)
Numerical simulation of molecular layer deposition for the formation of amorphous zeolitic imidazolate framework films
Amorphous zinc‐imidazolate (aZnmIm) deposition on silicon substrates via atomic/molecular layer deposition (ALD/MLD) is an essential step for the recently introduced all‐dry resist technology. This study presents a computational fluid dynamics (CFD) model for the 2‐methylimidazolate (HmIm) half‐MLD cycle and visualization of the transport phenomena inside the ALD/MLD reactor. The surface kinetics was extracted using the reactor‐substrate simulation combined with experimental measurements. The model presented is thoroughly validated using experimental data. Steric hindrance from the bulky HmIm molecule significantly suppresses deposition, especially at low temperatures. The effects of substrate size and placement in the reactor on film uniformity are numerically examined and experimentally validated, and the decoupling of reactor‐scale transport and substrate‐scale deposition is verified. A distributor‐based reactor optimization strategy is proposed, which, according to simulations, could reduce the non‐uniformity from 14.7% to 8.0%. This study contributes to MLD process development and reactor design.
- 22 June 2026
- Published by Wiley in AIChE Journal
- Vol. 72 (10)
Numerical simulation of molecular layer deposition for the formation of amorphous zeolitic imidazolate framework films
Amorphous zinc‐imidazolate (aZnmIm) deposition on silicon substrates via atomic/molecular layer deposition (ALD/MLD) is an essential step for the recently introduced all‐dry resist technology. This study presents a computational fluid dynamics (CFD) model for the 2‐methylimidazolate (HmIm) half‐MLD cycle and visualization of the transport phenomena inside the ALD/MLD reactor. The surface kinetics was extracted using the reactor‐substrate simulation combined with experimental measurements. The model presented is thoroughly validated using experimental data. Steric hindrance from the bulky HmIm molecule significantly suppresses deposition, especially at low temperatures. The effects of substrate size and placement in the reactor on film uniformity are numerically examined and experimentally validated, and the decoupling of reactor‐scale transport and substrate‐scale deposition is verified. A distributor‐based reactor optimization strategy is proposed, which, according to simulations, could reduce the non‐uniformity from 14.7% to 8.0%. This study contributes to MLD process development and reactor design.
- 31 December 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (1) , 442-452
Alkali Resistance of Thin-Film Composite Membranes with Different Nonwoven Fabric Supports: Experimental Evaluation and Numerical Simulation
- 31 December 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (1) , 442-452
Alkali Resistance of Thin-Film Composite Membranes with Different Nonwoven Fabric Supports: Experimental Evaluation and Numerical Simulation
- Open Access
- 16 October 2025
- Published by Springer Nature in Nature Chemical Engineering
- Vol. 3 (2) , 139
Publisher Correction: Spin-on deposition of amorphous zeolitic imidazolate framework films for lithography applications
- 16 October 2025
- Published by Springer Nature in Nature Chemical Engineering
- Vol. 3 (2) , 139
Open AccessPublisher Correction: Spin-on deposition of amorphous zeolitic imidazolate framework films for lithography applications
- 11 September 2025
- Published by Springer Nature in Nature Chemical Engineering
- Vol. 2 (9) , 594-607
Spin-on deposition of amorphous zeolitic imidazolate framework films for lithography applications
- 11 September 2025
- Published by Springer Nature in Nature Chemical Engineering
- Vol. 2 (9) , 594-607
Spin-on deposition of amorphous zeolitic imidazolate framework films for lithography applications
- Open Access
- 3 January 2025
- Published by Cold Spring Harbor Laboratory in bioRxiv
Computational Fluid Dynamics (CFD) Modeling of Ilamycin E Production in Streptomyces atratus SCSIO ZH16 Submerged Fermentation
A computational fluid dynamics (CFD) model was developed and validated against experiments for a laboratory-scale 5-L bioreactor. Numerical simulation was performed to describe the bioreaction ofStreptomyces atratusSCSIO ZH16 fermentation for ilamycin E production with the dynamic changes in viscosity of the fermentation broth due to biomass growth and decay. This model can account for the two-way coupling between the fermentation environment and medium, which allowed for the elucidation of the impact of the flow field in the bioreactor on bacterial growth and production, as well as the influence of viscosity changes on the flow field. This work represents the first integration of Streptomyces fermentation with CFD, enabling the simulation of flow field and mass transfer under varying stirring speed, aeration rate, and viscosity duringStreptomycesfermentation. An optimum range of fermentation broth viscosity (10-30 mPa s) was identified for ilamycin E production byS.atratusSCSIO ZH16 fermentation. Furthermore, the addition of sorbitol to optimize the viscosity of the fermentation broth in the later stages of fermentation. The enhanced mass transfer efficiency strengthens the respiration, energy supply, and carbon source consumption inStreptomyces, thereby increasing the ilamycin E production. This research offers a practical strategy for the process intensification and industrial scale-up for such bioreactors.Graphical
- 3 January 2025
- Published by Cold Spring Harbor Laboratory in bioRxiv
Open AccessComputational Fluid Dynamics (CFD) Modeling of Ilamycin E Production in Streptomyces atratus SCSIO ZH16 Submerged Fermentation
A computational fluid dynamics (CFD) model was developed and validated against experiments for a laboratory-scale 5-L bioreactor. Numerical simulation was performed to describe the bioreaction ofStreptomyces atratusSCSIO ZH16 fermentation for ilamycin E production with the dynamic changes in viscosity of the fermentation broth due to biomass growth and decay. This model can account for the two-way coupling between the fermentation environment and medium, which allowed for the elucidation of the impact of the flow field in the bioreactor on bacterial growth and production, as well as the influence of viscosity changes on the flow field. This work represents the first integration of Streptomyces fermentation with CFD, enabling the simulation of flow field and mass transfer under varying stirring speed, aeration rate, and viscosity duringStreptomycesfermentation. An optimum range of fermentation broth viscosity (10-30 mPa s) was identified for ilamycin E production byS.atratusSCSIO ZH16 fermentation. Furthermore, the addition of sorbitol to optimize the viscosity of the fermentation broth in the later stages of fermentation. The enhanced mass transfer efficiency strengthens the respiration, energy supply, and carbon source consumption inStreptomyces, thereby increasing the ilamycin E production. This research offers a practical strategy for the process intensification and industrial scale-up for such bioreactors.Graphical
- 9 November 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 500
Numerical simulation of the temperature excursions of porous substrates during atomic layer deposition
- 9 November 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 500
Numerical simulation of the temperature excursions of porous substrates during atomic layer deposition
- 1 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Effect of Metal Oxide Deposition on the Sensitivity and Resolution of E-Beam Photoresist
Organic-inorganic hybrid resists offer a solution to the issue of low sensitivity in organic photoresists like poly(methyl methacrylate) (PMMA). In this study, an organic-inorganic hybrid resist (PMMA-Al2O3) with high sensitivity and resolution was prepared by depositing metal oxides into PMMA using sequential infiltration synthesis (SIS). PMMA-Al2O3 was prepared by precisely controlling the number of SIS cycles (2O3 was prepared using 20 SIS cycles, which corresponds to the numerically predicted occurrence of the pore blockage at the upper region of the PMMA layer, exhibiting optimal electron beam (e-beam) resolution while enabling line exposure with a width of 50 nm. While the corresponding sensitivity was lower than those of the samples prepared using 5 and 10 SIS cycles, the degradation of the PMMA structure was affected under exposure. The pattern transfer results showed that the line width was well retained for 20 cycles of deposition because of the high etching resistance of Al2O3. This research is expected to provide an effective approach to developing next-generation high-performance photoresists.
- 1 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Effect of Metal Oxide Deposition on the Sensitivity and Resolution of E-Beam Photoresist
Organic-inorganic hybrid resists offer a solution to the issue of low sensitivity in organic photoresists like poly(methyl methacrylate) (PMMA). In this study, an organic-inorganic hybrid resist (PMMA-Al2O3) with high sensitivity and resolution was prepared by depositing metal oxides into PMMA using sequential infiltration synthesis (SIS). PMMA-Al2O3 was prepared by precisely controlling the number of SIS cycles (2O3 was prepared using 20 SIS cycles, which corresponds to the numerically predicted occurrence of the pore blockage at the upper region of the PMMA layer, exhibiting optimal electron beam (e-beam) resolution while enabling line exposure with a width of 50 nm. While the corresponding sensitivity was lower than those of the samples prepared using 5 and 10 SIS cycles, the degradation of the PMMA structure was affected under exposure. The pattern transfer results showed that the line width was well retained for 20 cycles of deposition because of the high etching resistance of Al2O3. This research is expected to provide an effective approach to developing next-generation high-performance photoresists.
- 3 June 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (23) , 10256-10264
Revealing the Effect of Heat Curing on the Uniformity of the Nanofiltration Membrane: Experiment and Simulation Studies
- 3 June 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (23) , 10256-10264
Revealing the Effect of Heat Curing on the Uniformity of the Nanofiltration Membrane: Experiment and Simulation Studies