Jacek Kromulski
Jacek Kromulski has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Jan Szczepaniak
Industrial Institute of Agricultural Engineering in Poznan
5 shared publications - Wojciech Tanaś
Department of Agricultural, Forest and Transport Machinery , University of Life Sciences in Lublin , Lublin , Poland
4 shared publications - Mariusz Szymanek
Department of Agricultural, Forest and Transport Machinery, University of Life Sciences in Lublin, Lublin, Poland
2 shared publications Tadeusz Pawłowski
Industrial Institute of Agricultural Engineering, Poznan, Poland
2 shared publicationsAndrzej Wojtyła
Department of Health Sciences, University of Medical Sciences, Poznań, Poland
1 shared publicationE. Hojan
1 shared publication
Latest Publications
- Open Access
- 25 September 2018
- Published by Institute of Rural Health in Annals of Agricultural and Environmental Medicine
- Vol. 25 (3) , 433-436
Modal analysis and acoustic noise characterization of a grain crusher
Introduction: Noise is one of the most important physical factors occurring in private farmers’ working environment. Hazardous noise exposures and hearing loss have been documented among farmers and farm workers for many years. In most cases, reducing the amplitude of vibratory motion of...
- 25 September 2018
- Published by Institute of Rural Health in Annals of Agricultural and Environmental Medicine
- Vol. 25 (3) , 433-436
Open AccessModal analysis and acoustic noise characterization of a grain crusher
Introduction: Noise is one of the most important physical factors occurring in private farmers’ working environment. Hazardous noise exposures and hearing loss have been documented among farmers and farm workers for many years. In most cases, reducing the amplitude of vibratory motion of...
- 2 June 2016
- Published by Institute of Rural Health in Annals of Agricultural and Environmental Medicine
- Vol. 23 (2) , 373-376
Absorbed power distribution in the whole-body system of a tractor operator
Many people are exposed to vibration (WBV) in their occupational lives. The biodynamic responses of the human body in sitting conditions have been widely measured under whole-body vibration (WBV). The measures are most often expressed in terms of force-motion relations at the driving-point, namely, mechanical impedance, apparent mass and absorbed power, and flow of vibration through the body, such as seat-to-head and body segments vibration transmissibility. The absorbed power is a measure of the energy absorbed by the subject due to the external forces applied to the system. The body behaves like a vibrating physical system with distributed energy-storage elements (masses, springs) and energy-dissipation elements (dampers). The total quantity of power can be divided into 2 components - one real and one imaginary. The real component reflects the energy-absorbing part of the system, due to the transformation of friction into heat within the tissues. The imaginary component reflects the energy-storing part of the system which does not consume any vibration energy. The seated human is modeled as a series 4-DOF dynamic models. After introduction of the excitation, the response in particular segments of the model can be analyzed. As an example, the vibration power dissipated in an operator's body segments has been determined as a function of the agricultural combination operating speed 1.4 - 2.75 ms(-1). The concept of absorbed power as a measurement for evaluation of WBV exposure opens a new area for research. The important character of absorbed power is that it has physical significance and therefore can be measured as well as computed analytically. The absorbed power relates to dissipation of energy attributed to relative motions of the visco-elastic tissues, muscles and skeletal system, which under prolonged exposures could lead to physical damage in the musculoskeletal system. A structural model of the human operator allows determination of the dynamic characteristics of the model, and study of the energy flow between the elements of the model.
- 2 June 2016
- Published by Institute of Rural Health in Annals of Agricultural and Environmental Medicine
- Vol. 23 (2) , 373-376
Absorbed power distribution in the whole-body system of a tractor operator
Many people are exposed to vibration (WBV) in their occupational lives. The biodynamic responses of the human body in sitting conditions have been widely measured under whole-body vibration (WBV). The measures are most often expressed in terms of force-motion relations at the driving-point, namely, mechanical impedance, apparent mass and absorbed power, and flow of vibration through the body, such as seat-to-head and body segments vibration transmissibility. The absorbed power is a measure of the energy absorbed by the subject due to the external forces applied to the system. The body behaves like a vibrating physical system with distributed energy-storage elements (masses, springs) and energy-dissipation elements (dampers). The total quantity of power can be divided into 2 components - one real and one imaginary. The real component reflects the energy-absorbing part of the system, due to the transformation of friction into heat within the tissues. The imaginary component reflects the energy-storing part of the system which does not consume any vibration energy. The seated human is modeled as a series 4-DOF dynamic models. After introduction of the excitation, the response in particular segments of the model can be analyzed. As an example, the vibration power dissipated in an operator's body segments has been determined as a function of the agricultural combination operating speed 1.4 - 2.75 ms(-1). The concept of absorbed power as a measurement for evaluation of WBV exposure opens a new area for research. The important character of absorbed power is that it has physical significance and therefore can be measured as well as computed analytically. The absorbed power relates to dissipation of energy attributed to relative motions of the visco-elastic tissues, muscles and skeletal system, which under prolonged exposures could lead to physical damage in the musculoskeletal system. A structural model of the human operator allows determination of the dynamic characteristics of the model, and study of the energy flow between the elements of the model.
- 10 June 2014
- Published by Institute of Rural Health in Annals of Agricultural and Environmental Medicine
- Vol. 21 (2) , 399-402
Vibration energy absorption in the whole-body system of a tractor operator
Many people are exposed to whole-body vibration (WBV) in their occupational lives, especially drivers of vehicles such as tractor and trucks. The main categories of effects from WBV are perception degraded comfort interference with activities-impaired health and occurrence of motion sickness. Absorbed power is defined as the power dissipated in a mechanical system as a result of an applied force. The vibration-induced injuries or disorders in a substructure of the human system are primarily associated with the vibration power absorption distributed in that substructure. The vibration power absorbed by the exposed body is a measure that combines both the vibration hazard and the biodynamic response of the body. The article presents measurement method for determining vibration power dissipated in the human whole body system called Vibration Energy Absorption (VEA). The vibration power is calculated from the real part of the force-velocity cross-spectrum. The absorbed power in the frequency domain can be obtained from the cross-spectrum of the force and velocity. In the context of the vibration energy transferred to a seated human body, the real component reflects the energy dissipated in the biological structure per unit of time, whereas the imaginary component reflects the energy stored/released by the system. The seated human is modeled as a series/parallel 4-DOF dynamic models. After introduction of the excitation, the response in particular segments of the model can be analyzed. As an example, the vibration power dissipated in an operator has been determined as a function of the agricultural combination operating speed 1.39 - 4.16 ms(-1).
- 10 June 2014
- Published by Institute of Rural Health in Annals of Agricultural and Environmental Medicine
- Vol. 21 (2) , 399-402
Vibration energy absorption in the whole-body system of a tractor operator
Many people are exposed to whole-body vibration (WBV) in their occupational lives, especially drivers of vehicles such as tractor and trucks. The main categories of effects from WBV are perception degraded comfort interference with activities-impaired health and occurrence of motion sickness. Absorbed power is defined as the power dissipated in a mechanical system as a result of an applied force. The vibration-induced injuries or disorders in a substructure of the human system are primarily associated with the vibration power absorption distributed in that substructure. The vibration power absorbed by the exposed body is a measure that combines both the vibration hazard and the biodynamic response of the body. The article presents measurement method for determining vibration power dissipated in the human whole body system called Vibration Energy Absorption (VEA). The vibration power is calculated from the real part of the force-velocity cross-spectrum. The absorbed power in the frequency domain can be obtained from the cross-spectrum of the force and velocity. In the context of the vibration energy transferred to a seated human body, the real component reflects the energy dissipated in the biological structure per unit of time, whereas the imaginary component reflects the energy stored/released by the system. The seated human is modeled as a series/parallel 4-DOF dynamic models. After introduction of the excitation, the response in particular segments of the model can be analyzed. As an example, the vibration power dissipated in an operator has been determined as a function of the agricultural combination operating speed 1.39 - 4.16 ms(-1).
- 10 June 2014
- Published by Institute of Rural Health in Annals of Agricultural and Environmental Medicine
- Vol. 21 (2) , 403-406
Modelling of agricultural combination driver behaviour from the aspect of safety of movement
Statistics show that the travel of agricultural machinery to a work area and their movement during labour is the source of many serious accidents. The most dangerous in consequences prove to be those that occur during transport and associated with maneuvering tractors and machinery (about 30% of all fatal accidents). It can be assumed that at least some of these accidents were caused indirectly by the specific design features of agricultural machines which adversely affect the driveability. The single- and multi-loop structures of the driver-vehicle system models are formulated to study the contributions of various preview and prediction strategies to the path tracking and dynamic performance of the articulated vehicle. In the presented study the compensatory model of driver utilizes the lateral acceleration of the tractor, roll angle of trailer sprung mass and the articulation rate as the internal motion feedback variables. The control model of steering of an agricultural set has been implemented in the Matlab/Simulink environment. The model has been constructed with the use of stochastic methods and operational transmittances describing the various components of the system. The model operational transmittances has been estimated using Box-Jenkins and continuous-time process models from input-output data. The model has been tested using experimental data from road investigation of the agricultural set.
- 10 June 2014
- Published by Institute of Rural Health in Annals of Agricultural and Environmental Medicine
- Vol. 21 (2) , 403-406
Modelling of agricultural combination driver behaviour from the aspect of safety of movement
Statistics show that the travel of agricultural machinery to a work area and their movement during labour is the source of many serious accidents. The most dangerous in consequences prove to be those that occur during transport and associated with maneuvering tractors and machinery (about 30% of all fatal accidents). It can be assumed that at least some of these accidents were caused indirectly by the specific design features of agricultural machines which adversely affect the driveability. The single- and multi-loop structures of the driver-vehicle system models are formulated to study the contributions of various preview and prediction strategies to the path tracking and dynamic performance of the articulated vehicle. In the presented study the compensatory model of driver utilizes the lateral acceleration of the tractor, roll angle of trailer sprung mass and the articulation rate as the internal motion feedback variables. The control model of steering of an agricultural set has been implemented in the Matlab/Simulink environment. The model has been constructed with the use of stochastic methods and operational transmittances describing the various components of the system. The model operational transmittances has been estimated using Box-Jenkins and continuous-time process models from input-output data. The model has been tested using experimental data from road investigation of the agricultural set.
- 1 December 2008
- Published by International Society for Horticultural Science (ISHS) in Acta Horticulturae
- No. 802,p. 227-232
CONTROL THEORY MODELS OF THE AGRICULTURAL SET (TRACTOR-POTATO PLANTER) DRIVER
- 1 December 2008
- Published by International Society for Horticultural Science (ISHS) in Acta Horticulturae
- No. 802,p. 227-232
CONTROL THEORY MODELS OF THE AGRICULTURAL SET (TRACTOR-POTATO PLANTER) DRIVER
- 1 October 1996
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 196 (4) , 429-438
AN APPLICATION OF TWO EXPERIMENTAL MODAL ANALYSIS METHODS FOR THE DETERMINATION OF OPERATIONAL DEFLECTION SHAPES
- 1 October 1996
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 196 (4) , 429-438
AN APPLICATION OF TWO EXPERIMENTAL MODAL ANALYSIS METHODS FOR THE DETERMINATION OF OPERATIONAL DEFLECTION SHAPES