LDLorenzo Donà

Lorenzo Donà

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lorenzo Donà has a total of 160 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    r2SCAN-Based Composite Methods for Solid-State Calculations

    by Mattia Raimondo, Lorenzo Donà, Bartolomeo Civalleri

    In this work, we have extended the existing “sol-3c” composite methods to meta-GGA XC functionals using the r2SCAN one. The corresponding r2SCAN-based composite methods in their pure and hybrid HF/DFT variants have been developed in combination with double-ζ (sol-def2-mSVP) and triple-ζ (pob-TZVP-rev2) quality basis sets specifically adapted to solids. The r2SCAN “sol-3c/pob-3c” methods are validated and tested on benchmark sets containing both intermolecular adducts (S66 × 7), molecular crystals (X23, DMC8) and simple inorganic solids (SS20). They are then applied to selected applications of relevance for solid-state calculations such as the study of the energetic and structural properties of layered materials, the mechanical, electronic and vibrational properties of α-quartz, relative stability of all-silica zeolite polymorphs, α-quartz vs stishovite phase transition and the adsorption of small molecules on the surface of inorganic solids and in the pore of metal–organic frameworks. The new methods show broad applicability with accurate results and an adjustable and affordable computational cost.

  • Open Access

    Adiabatic Connection Correlation Functionals in Metallic Solids from Hartree–Fock Gaussian Basis Set Ground State

    by Fabio Della Sala, Fulvio Sarcinella, Lucian A. Constantin, Lorenzo Donà, Eduardo Fabiano, Lorenzo Maschio, Bartolomeo Civalleri

    Adiabatic Connection Integrand Interpolation (ACII) methods, which mix the Görling-Levy second-order perturbation theory (GL2) correlation with density functionals from the strong interaction regime, have been successfully applied to molecular systems, strongly correlated systems, as well as the uniform electron gas (UEG). Here, we consider real metallic solids, including transition metals, where the GL2 term diverges. We tested different ACII approaches, with increased accuracy in reproducing the UEG correlation, and with different strong interaction functionals within the Point-charge-plus-Continuum (PC) model. Calculations are based on the Hartree–Fock (HF) ground state, which has been obtained with a Gaussian Type Orbital basis set, properly reoptimized toward the HF global minimum, with a derivative-free approach introduced here. We compare different metallic properties such as lattice constants, cohesive energies, and bulk total correlation energies with accurate reference results and state-of-the-art Density Functional Theory (DFT) approaches. We found that only the ACII approach with high accuracy for the UEG, namely, the Density Parameter Interpolation (DPI), and with the strong interaction functional reproducing the exact PC model for the Wigner crystal yields a correct second-order gradient-expansion correlation coefficient. This allows reproducing lattice constants and bulk correlation energies with an accuracy comparable to the best state-of-the-art approaches. When DPI is combined with GL2 correlation of atoms, accurate cohesive energies are obtained without error cancellation, which is common in DFT methods.

  • Open Access

    Adiabatic Connection Methods Applied to Molecular Crystals

    by Eduardo Fabiano, Fulvio Sarcinella, Fabio Della Sala, Chiara Ribaldone, Lorenzo Donà, Bartolomeo Civalleri, Lorenzo Maschio

    We extend adiabatic connection models (ACMs) derived from the Møller-Plesset adiabatic connection (MPAC) formalism, previously applied only to finite systems, to periodic molecular crystals. Lattice energies for 19 representative systems are computed and compared with periodic MP2, high-level reference, and experimental data. The tested ACMs achieve accuracies comparable to state-of-the-art dispersion-corrected hybrid density functionals and come close to those of correlated wave function methods. Among them, the HFAC24 model, which is a post-Hartree-Fock parameter-free correlation expression that correctly recovers both the uniform electron gas and strong-interaction limits, is the only one with accurate binding energies and accurate total energies. The results in this work demonstrate that MPAC-based ACMs provide an accurate and transferable framework for modeling molecular-crystal energetics and represent a robust, systematically improvable route for developing correlation models for extended systems.

  • Open Access

    On the Structure and Redox Behavior of Ni and Cu Single Atoms Supported on Carbon Nitride

    by Giovanni Colonnello, Ksenija Maver, Arianna Actis, Gaia Grando, Giacomo Filippini, Tiziano Montini, Michele Melchionna, Paolo Fornasiero, Lucia Nasi, Iztok Arčon, et al.

    Single‐atom catalysts (SACs) offer molecular‐level control in heterogeneous catalysis, but their activity depends on whether the support can sustain metal‐centered redox cycling. Here, Ni and Cu single atoms on carbon nitride (CN x ) are compared to determine how coordination geometry governs redox reversibility and photocatalytic performance. EPR/ENDOR spectroscopy, x‐ray absorption, and DFT identify a unique edge MN 4 site, composed of three sp 2 nitrogens and one bridging sp 3 nitrogen, as the binding motif for both metals. While Ni and Cu occupy the same MN 4 site in the oxidized state, their redox behavior diverges. Ni preserves a distorted square–planar geometry and undergoes fully reversible Ni 2 + /Ni + cycling. In contrast, Cu collapses upon reduction to a low‐coordinate Cu + species that cannot be re‐oxidized. This structural mismatch suppresses catalytic turnover. Accordingly, Ni@CN x efficiently promotes photoredox C─N, C─O, and C─S couplings, whereas Cu@CN x remains inactive. Catalytic performance thus depends on redox compatibility within a rigid binding pocket, rather than on metal identity alone.


  • Open Access

    On the Structure and Redox Behavior of Ni and Cu Single Atoms Supported on Carbon Nitride

    by Giovanni Colonnello, Ksenija Maver, Arianna Actis, Gaia Grando, Giacomo Filippini, Tiziano Montini, Michele Melchionna, Paolo Fornasiero, Lucia Nasi, Iztok Arčon, et al.

    Single‐atom catalysts (SACs) offer molecular‐level control in heterogeneous catalysis, but their activity depends on whether the support can sustain metal‐centered redox cycling. Here, Ni and Cu single atoms on carbon nitride (CN x ) are compared to determine how coordination geometry governs redox reversibility and photocatalytic performance. EPR/ENDOR spectroscopy, x‐ray absorption, and DFT identify a unique edge MN 4 site, composed of three sp 2 nitrogens and one bridging sp 3 nitrogen, as the binding motif for both metals. While Ni and Cu occupy the same MN 4 site in the oxidized state, their redox behavior diverges. Ni preserves a distorted square–planar geometry and undergoes fully reversible Ni 2 + /Ni + cycling. In contrast, Cu collapses upon reduction to a low‐coordinate Cu + species that cannot be re‐oxidized. This structural mismatch suppresses catalytic turnover. Accordingly, Ni@CN x efficiently promotes photoredox C─N, C─O, and C─S couplings, whereas Cu@CN x remains inactive. Catalytic performance thus depends on redox compatibility within a rigid binding pocket, rather than on metal identity alone.


  • Open Access

    Tuning of Electron-Donating Metal–Organic Frameworks toward High-Performance Triboelectric Nanogenerators for Self-Powered Shear Sensing

    by Tianhuai Xu, Lorenzo Donà, Jin-Chong Tan

    Triboelectric nanogenerators (TENGs), which convert mechanical energy into electrical signals, have emerged as apromising platform for self-powered motion sensing. However, the development of high-sensitivity TENG sensors remains limited by the availability of tunable and efficient tribo-positive materials, which are electron donors. In this work, we present a material design strategy based on the incorporation of electron-donating functionalized metal-organic framework (MOF) fillers into a polyurethane (PU) polymer matrix. Three functional groups (-CH3, -NH2, and -OH) were systematically studied to investigate their influence on triboelectric performance. The resulting composite membranes demonstrated tunable charge-donating behavior and improved electrical output, with the -OH-modified MOF yielding the highest electrical output of 197.6 ± 1.3 V and 0.47 ± 0.08 μA/cm2, which are 2.3 and 3.2 times higher than that of the pristine PU. The enhanced charge-donating mechanism was elucidated through a combination of advanced micro- and nanoscale chemical and mechanical analysis. Theoretical calculations employing ab initio density functional theory (DFT) were performed to reveal the electron distribution within the periodic MOF structure. Furthermore, the practical application of the optimized TENG device was demonstrated in a single-electrode shear sensor configuration, exhibiting high sensitivity in sliding motion detection. This study highlights a scalable and biocompatible strategy for improving tribo-positive materials and advancing the performance of tunable TENG-based sensors to enable shear force monitoring.


  • Open Access

    Carbon tetrafluoride – sulphur hexafluoride adsorption and separation with zirconium metal–organic frameworks decorated with fluorinated thiazolium salts

    by Giacomo Provinciali, Giulio Bicchierai, Zhi Fang, Tongan Yan, Lorenzo Donà, Bartolomeo Civalleri, Hongliang Huang, Giuliano Giambastiani, Giulia Tuci, Andrea Rossin

    Fluorinated thiazolium salts embedded in a microporous zirconium MOF enhance its adsorption capacity towards SF 6 and CF 4 . The F-MOFs show a preferential adsorption for SF 6 , achieving an efficient SF 6 /CF 4 separation from binary equimolar mixtures.


  • Open Access

    Carbon dioxide–sulphur hexafluoride adsorption and separation with zirconium metal–organic frameworks bearing basic and fluorinated linkers

    by Giacomo Provinciali, Giulio Bicchierai, Ferdinando Costantino, Cristiano Zuccaccia, Letizia Trovarelli, Lorenzo Donà, Bartolomeo Civalleri, Francesca Bonino, Francesca Rosso, Giuliano Giambastiani, et al.

    This study reports the use of two zirconium-based (UiO-6x) MIXMOFs combining basic and fluorinated linkers for CO 2 and SF 6 adsorption and separation. Collected evidence reveals positive synergistic effects between the two functional groups.


  • Open Access

    Carbon Dioxide Reduction Catalyzed by a Photoactive Bimetallic Zirconium/Cerium Metal-Organic Framework Built with a (Thieno)Thiophene Linker

    by Giacomo Provinciali, Maria Vincenza Pagliaro, Beatrice Muzzi, Lorenzo Poggini, Benny Danilo Belviso, Anna Mauri Mauri, Simona Galli, Lorenzo Donà, Bartolomeo Civalleri, Giuliano Giambastiani, et al.

    The development of efficient and stable photocatalysts for CO 2 reduction remains a major challenge in solar fuel production. Herein, we report the synthesis and characterization of the novel bimetallic...


  • Open Access

    BEST-CSP Benchmark Study of Polymorphs I and II of Sulfamerazine and the Perils of Polytype Polymorphs

    by William P. Wood, Mihails Arhangelskis, Erika Bartůňková, Carlos E. S. Bernardes, A. Daniel Boese, Doris E. Braun, Dejan-Krešimir Bučar, Helena Butkiewicz, Ctirad Červinka, Bartolomeo Civalleri, et al.

    We report the outcome of an interdisciplinary investigation, by the BEST-CSP network, of the kinetically favored form I and the low-temperature stable form II polymorphs of the drug sulfamerazine (SMZ). Form II can be reproducibly obtained by slurrying in acetonitrile­(MeCN)/water at room temperature, though seeding with form II significantly speeds up the conversion. New structure determinations have been obtained for both forms over a wide temperature range, with both single crystal and powder X-ray diffraction methods. Room temperature FT-IR and solid-state 13C NMR spectra are provided. The enantiotropic but practically irreversible crystal-to-crystal transition from form II to form I is observed at temperatures ranging from 150 to 170 °C in various differential scanning calorimetry (DSC) experiments, depending on sample and heating rate. The enthalpy of transition at 150 °C is measured as Δtrs H m(II → I) = 3.15 ± 0.12 kJ mol–1. The differences in the heat capacities mean that the DSC measured enthalpies vary with the onset temperature by about 0.55 kJ mol–1 over the range of heating rates commonly used in DSC experiments. Attempts to find the solvent-mediated transition temperature were complicated by observing that slurrying experiments in both methanol and MeCN/H2O above 50 °C produce a new, late-identified polymorph, sulfamerazine form V, which is closely related to form I but with an alternative packing of the double layers, i.e., is a polytype polymorph. Forms I and V are only easily distinguishable by high-quality powder X-ray diffraction. Form V appears to be marginally more stable than form I across the temperature range studied. The experimental data, including heat capacities and thermal expansion rates, are used to test a wide range of assumptions and energy models for calculating free energy differences between these polymorphs, illustrating the challenges in computationally modeling the thermodynamic transition temperature between form I and II. The implications of the discovery of form V on establishing the phase diagram of sulfamerazine are discussed.