Anna G. Chunovkina
Research Subjects
Anna G. Chunovkina has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Alexander V. Stepanov
D. I. Mendeleev Institute for Metrology
8 shared publications - Maxim Sergeevich Vonsky
D. I. Mendeleyev Institute for Metrology
4 shared publications - Nadezhda A. Koviazina
The Nikiforov Russian Center of Emergency and Radiation Medicine
4 shared publications - Natalya A. Alkhutova
The Nikiforov Russian Center of Emergency and Radiation Medicine
4 shared publications - Vladimir Leonidovich Emanuel
First Pavlov State Medical University of St. Petersburg
4 shared publications - Anastasiya A. Tumilovich
D. I. Mendeleyev Institute for Metrology
3 shared publications
Latest Publications
- Open Access
- 8 October 2026
- Published by Ural Research Institute of Metrology (UNIIM) in Measurement Standards. Reference Materials
- Vol. 22 (3) , 20-31
A Method for Verification and Adjustment of Calibration Intervals of Measuring Instruments Based on the Metrological Indicator
A Method for Verification and Adjustment of Calibration Intervals of Measuring Instruments Based on the Metrological Indicator | Tumilovich | Measurement Standards. Reference Materials Метод верификации и корректировки межкалибровочных интервалов средств измерений на основе показателя метрологической исправности | Тумилович | Эталоны. Стандартные образцы
- 8 October 2026
- Published by Ural Research Institute of Metrology (UNIIM) in Measurement Standards. Reference Materials
- Vol. 22 (3) , 20-31
Open AccessA Method for Verification and Adjustment of Calibration Intervals of Measuring Instruments Based on the Metrological Indicator
A Method for Verification and Adjustment of Calibration Intervals of Measuring Instruments Based on the Metrological Indicator | Tumilovich | Measurement Standards. Reference Materials Метод верификации и корректировки межкалибровочных интервалов средств измерений на основе показателя метрологической исправности | Тумилович | Эталоны. Стандартные образцы
- 14 March 2026
- Published by Federal Budgetary Institution "Research Center for Applied Metrology - Rostest" in Izmeritel`naya Tekhnika
- Vol. 75 (1) , 101-110
Ways to solve the problems of creating predictive measurement systems
The main problems of creating predictive measurement systems are considered. The role of predictive analytics, digital models and digital twins of measuring systems in predicting the drift of metrological characteristics, estimating the remaining resource and reducing the risk of metrological failure is shown. The key aspects of the development of intelligent measuring systems are considered: requirements for metrological support and features of measuring instruments based on artifi cial intelligence, the infl uence of their multicomponence and opacity of algorithms on the procedures of verifi cation, calibration and metrological self-control. Based on current standards and scientifi c publications, the terminology used in this fi eld is evaluated, and a defi nition of a predictive measuring system is proposed, including functions for predicting both process parameters and the metrological dependability of measuring instruments. Recommendations are formulated to improve methods for assessing the risk of metrological failure and the need to detail the requirements for intelligent measuring systems through the development (revision) of standards is noted.
- 14 March 2026
- Published by Federal Budgetary Institution "Research Center for Applied Metrology - Rostest" in Izmeritel`naya Tekhnika
- Vol. 75 (1) , 101-110
Ways to solve the problems of creating predictive measurement systems
The main problems of creating predictive measurement systems are considered. The role of predictive analytics, digital models and digital twins of measuring systems in predicting the drift of metrological characteristics, estimating the remaining resource and reducing the risk of metrological failure is shown. The key aspects of the development of intelligent measuring systems are considered: requirements for metrological support and features of measuring instruments based on artifi cial intelligence, the infl uence of their multicomponence and opacity of algorithms on the procedures of verifi cation, calibration and metrological self-control. Based on current standards and scientifi c publications, the terminology used in this fi eld is evaluated, and a defi nition of a predictive measuring system is proposed, including functions for predicting both process parameters and the metrological dependability of measuring instruments. Recommendations are formulated to improve methods for assessing the risk of metrological failure and the need to detail the requirements for intelligent measuring systems through the development (revision) of standards is noted.
- 14 March 2026
- Published by Federal Budgetary Institution "Research Center for Applied Metrology - Rostest" in Izmeritel`naya Tekhnika
- Vol. 75 (1) , 35-44
Using a two-sided power distribution family in processing measurement results
When processing measurement results and evaluating their accuracy, a normal distribution is traditionally used; however, in some cases this approach may be incorrect (for example, if the distribution is significantly asymmetric or it is bounded). Therefore, the selection of a family of distributions is relevant, which would allow the approximation of both traditionally applied normal and uniform laws, as well as encompass distributions of other types that more adequately reflect the specifics of particular measurement tasks. To model measurement data and evaluate accuracy indicators, it is proposed to use the family of two-sided power distributions. The choice of this family is due to the fact that it is described by an extremely simple mathematical model while providing sufficient variety of probability density function shapes, including uniform, bimodal, and unimodal distributions (both symmetric and asymmetric). Methods for fitting (assigning) the distribution law are provided based on both a priori information (using specified accuracy indicators: measured value, standard or expanded uncertainties, coverage interval boundaries for a given probability level) and sample data (including maximum likelihood, the method of moments, and two-sided power distribution fitting via inverse transformation). Metrologically justified criteria for the approximation of continuous distributions by distributions of the family under consideration are proposed, and its application in evaluating the uncertainty of multiple equally precise measurements is described. Software has been developed for transforming distributions, which allows the measurement model to be specified in an analytical form. The results obtained are useful for specialists applying statistical modeling methods when evaluating measurement results, certifying measurement procedures, and processing data from interlaboratory comparisons.
- 14 March 2026
- Published by Federal Budgetary Institution "Research Center for Applied Metrology - Rostest" in Izmeritel`naya Tekhnika
- Vol. 75 (1) , 35-44
Using a two-sided power distribution family in processing measurement results
When processing measurement results and evaluating their accuracy, a normal distribution is traditionally used; however, in some cases this approach may be incorrect (for example, if the distribution is significantly asymmetric or it is bounded). Therefore, the selection of a family of distributions is relevant, which would allow the approximation of both traditionally applied normal and uniform laws, as well as encompass distributions of other types that more adequately reflect the specifics of particular measurement tasks. To model measurement data and evaluate accuracy indicators, it is proposed to use the family of two-sided power distributions. The choice of this family is due to the fact that it is described by an extremely simple mathematical model while providing sufficient variety of probability density function shapes, including uniform, bimodal, and unimodal distributions (both symmetric and asymmetric). Methods for fitting (assigning) the distribution law are provided based on both a priori information (using specified accuracy indicators: measured value, standard or expanded uncertainties, coverage interval boundaries for a given probability level) and sample data (including maximum likelihood, the method of moments, and two-sided power distribution fitting via inverse transformation). Metrologically justified criteria for the approximation of continuous distributions by distributions of the family under consideration are proposed, and its application in evaluating the uncertainty of multiple equally precise measurements is described. Software has been developed for transforming distributions, which allows the measurement model to be specified in an analytical form. The results obtained are useful for specialists applying statistical modeling methods when evaluating measurement results, certifying measurement procedures, and processing data from interlaboratory comparisons.
- Open Access
- 18 January 2026
- Published by Ural Research Institute of Metrology (UNIIM) in Measurement Standards. Reference Materials
- Vol. 21 (4) , 124-138
Development Trends in Metrological Support for Measuring Systems Amidst their Growing Functional Complexity
As the architecture and functionality of measuring systems grow increasingly complex, there is a corresponding and steady rise in the need to enhance their metrological support. This necessitates the development of new methods for verification, calibration, and measurement uncertainty assessment under conditions of dynamic and intelligent interaction between elements.Analysis of the literature has identified the key stages and current trends in the development of measurement systems, which are driven by informatization, automation, and the growth of their multifunctional capabilities. The article demonstrates how modern digital technologies, predictive analytics, and artificial intelligence are transforming the role of measurement systems in process control. It ensures not only precise parameter monitoring but also active participation in their regulation and optimization.The study highlights how these transformations enhance product quality by enabling more in-depth and real-time analytics.The study also examines the emerging terminological inconsistencies caused by the convergence of IT and measurement technologies, highlighting the need for a unified conceptual framework across metrology and related areas.The study underscores the necessity of an interdisciplinary approach to ensure measurement reliability, reproducibility, and comparability within modern digital production settings.The work aims to establish the foundation for the further development of the metrological infrastructure in the context of the digital transformation of industry.
- 18 January 2026
- Published by Ural Research Institute of Metrology (UNIIM) in Measurement Standards. Reference Materials
- Vol. 21 (4) , 124-138
Open AccessDevelopment Trends in Metrological Support for Measuring Systems Amidst their Growing Functional Complexity
As the architecture and functionality of measuring systems grow increasingly complex, there is a corresponding and steady rise in the need to enhance their metrological support. This necessitates the development of new methods for verification, calibration, and measurement uncertainty assessment under conditions of dynamic and intelligent interaction between elements.Analysis of the literature has identified the key stages and current trends in the development of measurement systems, which are driven by informatization, automation, and the growth of their multifunctional capabilities. The article demonstrates how modern digital technologies, predictive analytics, and artificial intelligence are transforming the role of measurement systems in process control. It ensures not only precise parameter monitoring but also active participation in their regulation and optimization.The study highlights how these transformations enhance product quality by enabling more in-depth and real-time analytics.The study also examines the emerging terminological inconsistencies caused by the convergence of IT and measurement technologies, highlighting the need for a unified conceptual framework across metrology and related areas.The study underscores the necessity of an interdisciplinary approach to ensure measurement reliability, reproducibility, and comparability within modern digital production settings.The work aims to establish the foundation for the further development of the metrological infrastructure in the context of the digital transformation of industry.
- 14 November 2025
- Published by Federal Budgetary Institution "Research Center for Applied Metrology - Rostest" in Izmeritel`naya Tekhnika
- Vol. 74 (5) , 88-97
Measurements in laboratory medicine and external quality assessment
External quality assessment, conducted in the form of interlaboratory comparisons, is traditionally a tool for verifying laboratory qualifications and confirming the level of measurement accuracy required or claimed by laboratories. The authors identified industry-specific measurement features in laboratory medicine and analyzed long-term participation in the external quality assessment system. Based on these data, the authors concluded that in the absence of appropriate standards, certified reference materials and reference methods for many analytes, the external quality assessment system for medical laboratories acquires a different meaning and becomes an indispensable tool for obtaining objective data on the reproducibility/ consistency of the results obtained in different laboratories, identifying biases in the measurement results of participating laboratories. In such circumstances, an external quality assessment confirms the qualification of a medical laboratory in using a specific analytical technique in combination with reference clinical information corresponding to this particular technique. The results obtained may be of interest to specialists working at the interface of metrology and clinical laboratory diagnostics, as well as manufacturers of medical devices for in vitro diagnostics and external quality assessment providers.
- 14 November 2025
- Published by Federal Budgetary Institution "Research Center for Applied Metrology - Rostest" in Izmeritel`naya Tekhnika
- Vol. 74 (5) , 88-97
Measurements in laboratory medicine and external quality assessment
External quality assessment, conducted in the form of interlaboratory comparisons, is traditionally a tool for verifying laboratory qualifications and confirming the level of measurement accuracy required or claimed by laboratories. The authors identified industry-specific measurement features in laboratory medicine and analyzed long-term participation in the external quality assessment system. Based on these data, the authors concluded that in the absence of appropriate standards, certified reference materials and reference methods for many analytes, the external quality assessment system for medical laboratories acquires a different meaning and becomes an indispensable tool for obtaining objective data on the reproducibility/ consistency of the results obtained in different laboratories, identifying biases in the measurement results of participating laboratories. In such circumstances, an external quality assessment confirms the qualification of a medical laboratory in using a specific analytical technique in combination with reference clinical information corresponding to this particular technique. The results obtained may be of interest to specialists working at the interface of metrology and clinical laboratory diagnostics, as well as manufacturers of medical devices for in vitro diagnostics and external quality assessment providers.
- 1 November 2025
- Published by Springer Nature in Measurement Techniques
- Vol. 68 (9-10) , 612-622
Measurement practices in laboratory medicine and ways to improve external quality assessment
- 1 November 2025
- Published by Springer Nature in Measurement Techniques
- Vol. 68 (9-10) , 612-622
Measurement practices in laboratory medicine and ways to improve external quality assessment
- Open Access
- 25 December 2024
- Published by Ural Research Institute of Metrology (UNIIM) in Measurement Standards. Reference Materials
- Vol. 20 (4) , 89-102
On the Application of the Bayesian Approach to Estimating the Coverage Interval of a Bounded Measurand
The problem of estimating the measurement uncertainty near the natural measurand limits is of significant interest to practicing metrologists and is far from being resolved. The article considers the Bayesian approach to constructing an asymmetric coverage interval and estimating measurement uncertainty in the case where the set of permissible values of the measured quantity is bounded. Of particular interest is the case when the measured value is located near the boundary of the set of its permissible values, since the constructed «traditional» symmetric interval corresponding to a coverage factor value of two (for a confidence level of 95 %) goes beyond the boundaries of this set and, as a consequence, do not provide the specified level of confidence probability.When implementing the Bayesian approach, an important starting point is the choice of a priori density distribution. Four options for choosing a prior probability density are considered, including an asymmetric distribution from the family of two-sided power distributions (TSP). Recommendations are given for their selection and application depending on the proximity of the a priori estimate of the lower limit of the measured value, as well as the measured value, to the upper limit of the range of permissible values, relative to the measurement uncertainty value.A specialized software has been developed to estimate the posterior density characteristics (expectation, mode and standard deviation) of measurand distributions and construct the shortest coverage interval, as well as to calculate the confidence level corresponding to the «traditional» coverage interval obtained using expanded uncertainty. The use of this software allows to obtain complete information about the measurement accuracy and to make an informed choice when presenting the measurement result.The results obtained may be of interest to practicing metrologists in the development and certification of measurement techniques, processing of experimental data and presentation of measurement results when characterizing standard samples, as well as specialists involved in the application of methods of probability theory and mathematical statistics in solving practical problems.
- 25 December 2024
- Published by Ural Research Institute of Metrology (UNIIM) in Measurement Standards. Reference Materials
- Vol. 20 (4) , 89-102
Open AccessOn the Application of the Bayesian Approach to Estimating the Coverage Interval of a Bounded Measurand
The problem of estimating the measurement uncertainty near the natural measurand limits is of significant interest to practicing metrologists and is far from being resolved. The article considers the Bayesian approach to constructing an asymmetric coverage interval and estimating measurement uncertainty in the case where the set of permissible values of the measured quantity is bounded. Of particular interest is the case when the measured value is located near the boundary of the set of its permissible values, since the constructed «traditional» symmetric interval corresponding to a coverage factor value of two (for a confidence level of 95 %) goes beyond the boundaries of this set and, as a consequence, do not provide the specified level of confidence probability.When implementing the Bayesian approach, an important starting point is the choice of a priori density distribution. Four options for choosing a prior probability density are considered, including an asymmetric distribution from the family of two-sided power distributions (TSP). Recommendations are given for their selection and application depending on the proximity of the a priori estimate of the lower limit of the measured value, as well as the measured value, to the upper limit of the range of permissible values, relative to the measurement uncertainty value.A specialized software has been developed to estimate the posterior density characteristics (expectation, mode and standard deviation) of measurand distributions and construct the shortest coverage interval, as well as to calculate the confidence level corresponding to the «traditional» coverage interval obtained using expanded uncertainty. The use of this software allows to obtain complete information about the measurement accuracy and to make an informed choice when presenting the measurement result.The results obtained may be of interest to practicing metrologists in the development and certification of measurement techniques, processing of experimental data and presentation of measurement results when characterizing standard samples, as well as specialists involved in the application of methods of probability theory and mathematical statistics in solving practical problems.
- 8 February 2023
- Published by Springer Nature in Measurement Techniques
- Vol. 65 (7) , 1-7
Estimation of Measurement Uncertainties in Laboratory Medicine
- 8 February 2023
- Published by Springer Nature in Measurement Techniques
- Vol. 65 (7) , 1-7
Estimation of Measurement Uncertainties in Laboratory Medicine
- 8 February 2023
- Published by Springer Nature in Measurement Techniques
- Vol. 65 (7) , 1-7
Metrological Certification of the Algorithm for Estimating Inconsistent Data of Key Comparisons of National Standards
- 8 February 2023
- Published by Springer Nature in Measurement Techniques
- Vol. 65 (7) , 1-7
Metrological Certification of the Algorithm for Estimating Inconsistent Data of Key Comparisons of National Standards
- 13 December 2022
- Published by Springer Nature in Accreditation and Quality Assurance
- Vol. 28 (3) , 129-137
On testing of the homogeneity of variances for two-side power distribution family
- 13 December 2022
- Published by Springer Nature in Accreditation and Quality Assurance
- Vol. 28 (3) , 129-137
On testing of the homogeneity of variances for two-side power distribution family