Todd A. Kingston
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Todd A. Kingston has a total of 123 co-authors. Here are the top co-authors by number of shared publications:
Qusai Alahmad
15 shared publicationsCary L. Pint
13 shared publications- Vitaliy Yurkiv
University of Arizona
12 shared publications - Jayanth Ramamurthy
Iowa State University
11 shared publications Mahdi Ul Ishtiaque
Iowa State University
10 shared publications- Justin A. Weibel
School of Mechanical Engineering, Purdue University , West Lafayette, IN 47907
8 shared publications
Latest Publications
- Open Access
- 27 August 2026
- Published by Elsevier in SSRN Electronic Journal
Temperature and Voltage Effects on the Impedance Response of 4680 Lithium-Ion Batteries: Experimental Analysis and Parametric Sensitivity
This study investigates the effects of temperature and cell voltage on the electrochemical and thermal behavior of commercial 24 Ah 4680-format graphite/LiNi0.8Mn0.1Co0.1O2 (NMC811) lithium-ion batteries (LIBs). We present electrochemical impedance spectroscopy (EIS) measured at four temperatures (-14 °C, 2 °C, 23 °C, 42 °C) and multiple cell voltages, and analyze the results using the Distribution of relaxation times (DRT). Nyquist and Bode plots reveal strong temperature- and voltage-dependent behavior in ohmic, charge-transfer, and diffusion resistances, but overlapping processes obscure definitive attribution. DRT provides time-resolved separation, identifying contributions from anode/cathode charge transfer (CT), anode solid electrolyte interphase (SEI), lithium plating, cathode electrolyte interface, and solid-state diffusion. With increasing temperature, the mid-frequency arc contracts by ~5–10, and time constants shift by 102–103 toward higher frequencies. The nominal-voltage condition exhibits the minimum resistance, while the full-charge and low-voltage conditions show larger CT and diffusion contributions. At -14 °C, a plating-related peak appears at high voltages, while at 42 °C, the spectrum simplifies to CT and diffusion. A sensitivity analysis of the regularization parameter shows an approximately 5% DRT change for a 10% decrease in λ at -14 °C and less than 1% at the warmer conditions. The results establish an experimental impedance and DRT benchmark for commercial 4680 cells and identify the operating conditions under which cold-temperature interfacial and transport limitations become dominant.
- 27 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTemperature and Voltage Effects on the Impedance Response of 4680 Lithium-Ion Batteries: Experimental Analysis and Parametric Sensitivity
This study investigates the effects of temperature and cell voltage on the electrochemical and thermal behavior of commercial 24 Ah 4680-format graphite/LiNi0.8Mn0.1Co0.1O2 (NMC811) lithium-ion batteries (LIBs). We present electrochemical impedance spectroscopy (EIS) measured at four temperatures (-14 °C, 2 °C, 23 °C, 42 °C) and multiple cell voltages, and analyze the results using the Distribution of relaxation times (DRT). Nyquist and Bode plots reveal strong temperature- and voltage-dependent behavior in ohmic, charge-transfer, and diffusion resistances, but overlapping processes obscure definitive attribution. DRT provides time-resolved separation, identifying contributions from anode/cathode charge transfer (CT), anode solid electrolyte interphase (SEI), lithium plating, cathode electrolyte interface, and solid-state diffusion. With increasing temperature, the mid-frequency arc contracts by ~5–10, and time constants shift by 102–103 toward higher frequencies. The nominal-voltage condition exhibits the minimum resistance, while the full-charge and low-voltage conditions show larger CT and diffusion contributions. At -14 °C, a plating-related peak appears at high voltages, while at 42 °C, the spectrum simplifies to CT and diffusion. A sensitivity analysis of the regularization parameter shows an approximately 5% DRT change for a 10% decrease in λ at -14 °C and less than 1% at the warmer conditions. The results establish an experimental impedance and DRT benchmark for commercial 4680 cells and identify the operating conditions under which cold-temperature interfacial and transport limitations become dominant.
- Open Access
- 25 August 2026
- Published by Wiley in Advanced Materials Technologies
High Throughput Aerosol Jet Printing to Operationalize High Aspect Ratio Patterning
Aerosol jet printing presents opportunities for conformal, flexible, and hybrid electronics given its materials compatibility and noncontact nature. However, adoption into production environments remains challenged by complex tradeoffs between throughput, precision, and motion constraints. This is particularly relevant for high‐aspect‐ratio or 3D patterning; however, most literature investigating process optimization regards throughput considerations as secondary to resolution. This work adopts a systematic approach, pushing throughput for aerosol jet printing to identify and address technical challenges associated with ink stability and throughput‐resolution tradeoffs. A heated bubbler is implemented to mitigate ink composition drift within the atomizer, while in‐line heating reduces the effect of throughput on resolution by ∼53%. Operating at high deposition rates pushes the printing process into a liquid wetting regime driven by capillarity, leading to an atypical throughput‐resolution correlation. This knowledge, and associated process advances, enable practical operation of aerosol jet printing for high‐aspect‐ratio structures, demonstrated by printing thermal fins directly onto silicon to realize a ∼69% reduction in thermal resistance under convective cooling. By addressing mechanistic limitations to high‐deposition‐rate aerosol jet printing, this work facilitates a more practical printing process, opening pathways to address complex manufacturing challenges requiring adaptability and precision for high‐value printed electronics.
- 25 August 2026
- Published by Wiley in Advanced Materials Technologies
Open AccessHigh Throughput Aerosol Jet Printing to Operationalize High Aspect Ratio Patterning
Aerosol jet printing presents opportunities for conformal, flexible, and hybrid electronics given its materials compatibility and noncontact nature. However, adoption into production environments remains challenged by complex tradeoffs between throughput, precision, and motion constraints. This is particularly relevant for high‐aspect‐ratio or 3D patterning; however, most literature investigating process optimization regards throughput considerations as secondary to resolution. This work adopts a systematic approach, pushing throughput for aerosol jet printing to identify and address technical challenges associated with ink stability and throughput‐resolution tradeoffs. A heated bubbler is implemented to mitigate ink composition drift within the atomizer, while in‐line heating reduces the effect of throughput on resolution by ∼53%. Operating at high deposition rates pushes the printing process into a liquid wetting regime driven by capillarity, leading to an atypical throughput‐resolution correlation. This knowledge, and associated process advances, enable practical operation of aerosol jet printing for high‐aspect‐ratio structures, demonstrated by printing thermal fins directly onto silicon to realize a ∼69% reduction in thermal resistance under convective cooling. By addressing mechanistic limitations to high‐deposition‐rate aerosol jet printing, this work facilitates a more practical printing process, opening pathways to address complex manufacturing challenges requiring adaptability and precision for high‐value printed electronics.
- Open Access
- 4 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (71) , e77527
Mechanisms of Degradation in Li‐Ion Batteries Under Low Temperature Exposures
This study demonstrates that subjecting Nickel Manganese Cobalt Oxide (NMC) graphite single‐layer pouch cells to temperatures down to −60°C during rest periods leads to performance reduction over 4× greater than control cells tested without low‐temperature exposure. A combination of the observed irreversible electrolyte phase separation effects along with mechanochemical stress build‐up during cathode delithiation results in a combined series of short‐ and long‐term degradation effects associated with low‐temperature exposures. In particular, these findings show that low‐temperature exposures lead to more brittle behavior of primary NMC particles that restrict c ‐axis expansion during delithiation and accelerate localized primary and secondary particle cracking as a long‐term sustained low‐temperature degradation mode. These findings provide mechanistic atomic‐ and molecular‐scale insight into an ongoing and controversial topic of low‐temperature effects in batteries that are central for emerging applications in military, commercial, and space systems.
- 4 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (71) , e77527
Open AccessMechanisms of Degradation in Li‐Ion Batteries Under Low Temperature Exposures
This study demonstrates that subjecting Nickel Manganese Cobalt Oxide (NMC) graphite single‐layer pouch cells to temperatures down to −60°C during rest periods leads to performance reduction over 4× greater than control cells tested without low‐temperature exposure. A combination of the observed irreversible electrolyte phase separation effects along with mechanochemical stress build‐up during cathode delithiation results in a combined series of short‐ and long‐term degradation effects associated with low‐temperature exposures. In particular, these findings show that low‐temperature exposures lead to more brittle behavior of primary NMC particles that restrict c ‐axis expansion during delithiation and accelerate localized primary and secondary particle cracking as a long‐term sustained low‐temperature degradation mode. These findings provide mechanistic atomic‐ and molecular‐scale insight into an ongoing and controversial topic of low‐temperature effects in batteries that are central for emerging applications in military, commercial, and space systems.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (2) , 163
Evaluating 4680 Cylindrical Cells for Sustainable EV Duty: Multi-Cycle Testing and Electro-Thermal Modeling
Large-format 4680 cylindrical Li-ion cells are central to current and next-generation electric vehicle (EV) packs, yet their performance and degradation under realistic drive-cycle (DC) loading remain only partially understood. To better quantify these effects, in this work, we present an experimental and modeling study that links standard regulatory cycles and EV-specific duty cycles to the electro-thermal response of Tesla-type 4680 (24 Ah) cells across ambient and sub-zero conditions.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (2) , 163
Evaluating 4680 Cylindrical Cells for Sustainable EV Duty: Multi-Cycle Testing and Electro-Thermal Modeling
Large-format 4680 cylindrical Li-ion cells are central to current and next-generation electric vehicle (EV) packs, yet their performance and degradation under realistic drive-cycle (DC) loading remain only partially understood. To better quantify these effects, in this work, we present an experimental and modeling study that links standard regulatory cycles and EV-specific duty cycles to the electro-thermal response of Tesla-type 4680 (24 Ah) cells across ambient and sub-zero conditions.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 354
Transformer-Enabled HAADF-STEM Quantification of SEI Grain Boundaries for Safety-Relevant Multiphysics Modeling of Li-Ion Batteries
Thermal runaway (TR) in lithium-ion batteries is initiated by coupled exothermic reactions, and the thermal stability and composition of the solid electrolyte interphases (SEI) strongly influence the onset conditions and escalation pathways. Despite the central role of interphases, quantitatively linking atomic-scale SEI microstructure, especially grain boundaries (GBs) and crystallographic orientation, to battery performance and safety remains challenging because extracting grain/GB networks and Coincident Site Lattice (CSL) Σ values from High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy (HAADF STEM) images is typically manual, subjective, and challenging to scale. Here, we develop a transformer-based image analysis pipeline that automatically performs (i) grain and GB segmentation, (ii) atomic column height estimation, and (iii) CSL Σ classification directly from experimental HAADF STEM images of representative inorganic SEI components. The model1 is trained on a hybrid dataset combining experimental images and physics-informed synthetic images generated from DFT-derived structures and multislice STEM simulations spanning key SEI phases (LiF, Li2CO3, Li2O, LiOH), grain orientations, GB types, and imaging conditions. The framework achieves high-fidelity GB mapping at sub-nanometer resolution while providing CSL distributions and column-height fields that enable battery-relevant descriptors, such as GB density, GB character fractions, and local atomic composition associated with transport pathways and interphase stability.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 354
Transformer-Enabled HAADF-STEM Quantification of SEI Grain Boundaries for Safety-Relevant Multiphysics Modeling of Li-Ion Batteries
Thermal runaway (TR) in lithium-ion batteries is initiated by coupled exothermic reactions, and the thermal stability and composition of the solid electrolyte interphases (SEI) strongly influence the onset conditions and escalation pathways. Despite the central role of interphases, quantitatively linking atomic-scale SEI microstructure, especially grain boundaries (GBs) and crystallographic orientation, to battery performance and safety remains challenging because extracting grain/GB networks and Coincident Site Lattice (CSL) Σ values from High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy (HAADF STEM) images is typically manual, subjective, and challenging to scale. Here, we develop a transformer-based image analysis pipeline that automatically performs (i) grain and GB segmentation, (ii) atomic column height estimation, and (iii) CSL Σ classification directly from experimental HAADF STEM images of representative inorganic SEI components. The model1 is trained on a hybrid dataset combining experimental images and physics-informed synthetic images generated from DFT-derived structures and multislice STEM simulations spanning key SEI phases (LiF, Li2CO3, Li2O, LiOH), grain orientations, GB types, and imaging conditions. The framework achieves high-fidelity GB mapping at sub-nanometer resolution while providing CSL distributions and column-height fields that enable battery-relevant descriptors, such as GB density, GB character fractions, and local atomic composition associated with transport pathways and interphase stability.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 353
Diagnosing Degradation Pathways of Li-Ion 18650s through a Coupled Thermal-Structural-Electrochemical Approach
In contrast to the extreme cycling conditions required for accelerated aging studies, most commercial 18650s experience mild cycling over their lifetime. To understand how cells’ operational thermal stability changes after mild C-rate cycling, thermal, crystallographic, and electrochemical characterization approaches were combined and applied to LiNixCoyAlzO2/Graphite+Si 18650s that were cycled at C/3 until 70% remaining useful life (>1000 cycles). Contrary to the idea that lower capacity cells generate less heat, the aged cells showed an increase in both instantaneous heat generation (as confirmed by isothermal calorimetry) and temperature (as confirmed by adiabatic calorimetry) during galvanostatic operation. Heat generation was accurately modeled using a two-component reconstruction of reversible heating and joule heating components, measured from entropic potential testing, akin to a temperature-modulated galvanostatic intermittent titration technique experiment. At the same time, entropic potential testing enabled the deconvolution of thermodynamic and kinetic components of heat. Changes in the thermodynamic component (reversible heat generation) directly correlated with crystallographic heterogeneity, as tracked via synchrotron-based in-situ x-ray diffraction (XRD) mapping, suggesting diminished redox activity and a loss of lithium inventory. Changes in the kinetic component (Joule heating) correlated to increased overpotential and internal resistance and jelly roll collapse. This study places the two-component reconstruction and entropic potential testing in conversation with structural (XRD) and electrochemical (dQ/dV) approaches as a key degradation detection technique for the separation of thermodynamic and kinetic factors.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 353
Diagnosing Degradation Pathways of Li-Ion 18650s through a Coupled Thermal-Structural-Electrochemical Approach
In contrast to the extreme cycling conditions required for accelerated aging studies, most commercial 18650s experience mild cycling over their lifetime. To understand how cells’ operational thermal stability changes after mild C-rate cycling, thermal, crystallographic, and electrochemical characterization approaches were combined and applied to LiNixCoyAlzO2/Graphite+Si 18650s that were cycled at C/3 until 70% remaining useful life (>1000 cycles). Contrary to the idea that lower capacity cells generate less heat, the aged cells showed an increase in both instantaneous heat generation (as confirmed by isothermal calorimetry) and temperature (as confirmed by adiabatic calorimetry) during galvanostatic operation. Heat generation was accurately modeled using a two-component reconstruction of reversible heating and joule heating components, measured from entropic potential testing, akin to a temperature-modulated galvanostatic intermittent titration technique experiment. At the same time, entropic potential testing enabled the deconvolution of thermodynamic and kinetic components of heat. Changes in the thermodynamic component (reversible heat generation) directly correlated with crystallographic heterogeneity, as tracked via synchrotron-based in-situ x-ray diffraction (XRD) mapping, suggesting diminished redox activity and a loss of lithium inventory. Changes in the kinetic component (Joule heating) correlated to increased overpotential and internal resistance and jelly roll collapse. This study places the two-component reconstruction and entropic potential testing in conversation with structural (XRD) and electrochemical (dQ/dV) approaches as a key degradation detection technique for the separation of thermodynamic and kinetic factors.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (1) , 126
Electrode-Resolved Impedance and Thermal Runaway Risk Prediction via Experimental and Physics-Informed Transformer Model
Thermal runaway (TR) in lithium-ion batteries remains a critical safety concern, yet it is difficult to diagnose it early solely from pack-level voltage and temperature. Electrochemical impedance spectroscopy (EIS) encodes rich information on charge-transfer kinetics, transport, and interfacial degradation, but these effects are convolved at the full-cell level and not directly linked to TR risk. In this work, we develop a physics-informed transformer-based neural network that deconvolves full-cell EIS into electrode-resolved impedance and uses it to analyze degradation pathways associated with TR.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (1) , 126
Electrode-Resolved Impedance and Thermal Runaway Risk Prediction via Experimental and Physics-Informed Transformer Model
Thermal runaway (TR) in lithium-ion batteries remains a critical safety concern, yet it is difficult to diagnose it early solely from pack-level voltage and temperature. Electrochemical impedance spectroscopy (EIS) encodes rich information on charge-transfer kinetics, transport, and interfacial degradation, but these effects are convolved at the full-cell level and not directly linked to TR risk. In this work, we develop a physics-informed transformer-based neural network that deconvolves full-cell EIS into electrode-resolved impedance and uses it to analyze degradation pathways associated with TR.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (1) , 95
Lithium-Plating Behavior in Commercial 4680 Cylindrical Cells during Low-Temperature Charging
Lithium plating is a critical degradation mechanism in lithium-ion batteries (LIBs) during low-temperature charging, where reduced ionic mobility and slower intercalation kinetics promote metallic lithium deposition on the graphite anode. However, plating behavior in large-format cells such as the commercial 4680 (46 mm diameter, 80 mm height) remains under-characterized. In this work, we investigate lithium plating in 4680 24 Ah cylindrical cells at sub-zero temperatures of −20 °C, −10 °C, and 0 °C, using 22 °C as a baseline. During testing, surface temperatures were monitored using FLIR infrared camera and a thermocouple attached to the battery surface. Cells were charged from 2.7 V to 4.2 V under a constant-current, constant-voltage (CCCV) protocol at C-rates of 0.05C, 0.5C, and 1C, with electrochemical impedance spectroscopy (EIS) performed at designated voltages (state of charge, SOC).
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (1) , 95
Lithium-Plating Behavior in Commercial 4680 Cylindrical Cells during Low-Temperature Charging
Lithium plating is a critical degradation mechanism in lithium-ion batteries (LIBs) during low-temperature charging, where reduced ionic mobility and slower intercalation kinetics promote metallic lithium deposition on the graphite anode. However, plating behavior in large-format cells such as the commercial 4680 (46 mm diameter, 80 mm height) remains under-characterized. In this work, we investigate lithium plating in 4680 24 Ah cylindrical cells at sub-zero temperatures of −20 °C, −10 °C, and 0 °C, using 22 °C as a baseline. During testing, surface temperatures were monitored using FLIR infrared camera and a thermocouple attached to the battery surface. Cells were charged from 2.7 V to 4.2 V under a constant-current, constant-voltage (CCCV) protocol at C-rates of 0.05C, 0.5C, and 1C, with electrochemical impedance spectroscopy (EIS) performed at designated voltages (state of charge, SOC).
- Open Access
- 3 July 2026
- Published by Elsevier in SSRN Electronic Journal
Oxygen Depletion During NMC Lithium-Ion Battery Fires Amplifies Metal-Laden Ultrafine Aerosols and PPE Contamination
Lithium-ion battery fires present complex aerosol hazards that vary substantially with oxygen availability; however, the effects of oxygen depletion on particulate emissions, soot transformation, and contamination pathways remain poorly characterized. Here, LiNi₀.₈Mn₀.₁Co₀.₁O₂ (NMC811) 18650 cells (2.5 Ah) were tested across a 12-condition state-of-charge–oxygen matrix (0–70% SOC; 20.95%, 7%, and 0% O₂) under 50 kW/m² radiant heating. Reducing O₂ decreased peak heat release rate by 47–71% but increased total particulate matter by 22–158% and particle number concentration by 84–134%. Ultrafine particles (≤100 nm) dominated particle emissions, accounting for 80–94% of total counts. Airborne metal emissions exhibited a non-monotonic oxygen response, reaching 11.90 ± 0.68 µg/m³ at 7% O₂ and 70% SOC, representing a 65% increase relative to normoxic (20.95% O₂) conditions. Multi-technique soot characterization (HRTEM, Raman spectroscopy, and XPS) revealed increased carbon ordering under oxygen depletion, evidenced by reduced D1/G ratios (0.386→0.261), decreased fringe tortuosity (1.37→1.13), and substantially lower oxygenated surface carbon. Soot–metal aggregate particle diameters increased from 47 ± 9 to 61 ± 11 nm. SEM–EDS identified Ni- and Co-rich particle deposition throughout firefighter PPE layers under reduced or absent flaming conditions. These results demonstrate that oxygen depletion shifts NMC battery-fire emissions toward enhanced ultrafine particle loading, persistent metal-containing aerosols, and more ordered soot structures, providing source-characterization data for battery-fire hazard assessment and for future validation of mitigation, exposure-control, and PPE-contamination protocols.
- 3 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOxygen Depletion During NMC Lithium-Ion Battery Fires Amplifies Metal-Laden Ultrafine Aerosols and PPE Contamination
Lithium-ion battery fires present complex aerosol hazards that vary substantially with oxygen availability; however, the effects of oxygen depletion on particulate emissions, soot transformation, and contamination pathways remain poorly characterized. Here, LiNi₀.₈Mn₀.₁Co₀.₁O₂ (NMC811) 18650 cells (2.5 Ah) were tested across a 12-condition state-of-charge–oxygen matrix (0–70% SOC; 20.95%, 7%, and 0% O₂) under 50 kW/m² radiant heating. Reducing O₂ decreased peak heat release rate by 47–71% but increased total particulate matter by 22–158% and particle number concentration by 84–134%. Ultrafine particles (≤100 nm) dominated particle emissions, accounting for 80–94% of total counts. Airborne metal emissions exhibited a non-monotonic oxygen response, reaching 11.90 ± 0.68 µg/m³ at 7% O₂ and 70% SOC, representing a 65% increase relative to normoxic (20.95% O₂) conditions. Multi-technique soot characterization (HRTEM, Raman spectroscopy, and XPS) revealed increased carbon ordering under oxygen depletion, evidenced by reduced D1/G ratios (0.386→0.261), decreased fringe tortuosity (1.37→1.13), and substantially lower oxygenated surface carbon. Soot–metal aggregate particle diameters increased from 47 ± 9 to 61 ± 11 nm. SEM–EDS identified Ni- and Co-rich particle deposition throughout firefighter PPE layers under reduced or absent flaming conditions. These results demonstrate that oxygen depletion shifts NMC battery-fire emissions toward enhanced ultrafine particle loading, persistent metal-containing aerosols, and more ordered soot structures, providing source-characterization data for battery-fire hazard assessment and for future validation of mitigation, exposure-control, and PPE-contamination protocols.