Christos Stamatiou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christos Stamatiou has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Vassiliki Kazana
Democritus University of Thrace
6 shared publications - Dimitrios Ioannis Raptis
Renewable Natural Resource Management and Bioeconomy Laboratory, Department of Forest and Natural Environment Sciences, Democritus University of Thrace, 66100 Drama, Greece
4 shared publications Angelos Kazaklis
OLYMPOS-Centre for Integrated Environmental Management, 55132 Kalamaria-Thessaloniki, Greece
3 shared publications- Angelos Kazaklis
OLYMPOS- Centre for Integrated Environmental Management, Thessaloniki, Greece
3 shared publications Anastasia Boutsimea
Eastern Macedonia and Thrace Institute of Technology
2 shared publicationsChristodoulos Daoutis
2 shared publications
Latest Publications
- Open Access
Nonlinear Quantile Mixed-Effects Models for Prediction of the Maximum Crown Width of Fagus sylvatica L., Pinus nigra Arn. and Pinus brutia Ten.
In the current study, a novel approach combining quantile regression with nonlinear mixed-effects (QR-NLME) modeling was applied to predict the maximum crown width (cwmax) of three economically important forest species—the European beech (Fagus sylvatica L.), the black pine (Pinus nigra Arn.), and the Calabrian pine (Pinus brutia Ten.) at tree level. A power QR-NLME model was fitted first to a dataset including 1414 European beech trees obtained from 29 randomly distributed sample plots, 770 black pine trees from 25 sample plots, and 1880 Calabrian pine trees from 41 sample plots in Greece, to predict the cwmax at tree level. Additionally, a nonlinear mixed-effects model (NLME) was fitted to the same dataset to predict the average crown width at tree level for all species. In the second stage, the crown competition factor (CCF) was estimated based on the population average response of the cwmax predictions. The proposed approach presented sound results when compared with the outcomes of relevant models from other regions fitted to open-grown tree data, and therefore, it can be well implemented on clustered data structures, in cases of absence of open-grown tree data.
Open AccessNonlinear Quantile Mixed-Effects Models for Prediction of the Maximum Crown Width of Fagus sylvatica L., Pinus nigra Arn. and Pinus brutia Ten.
In the current study, a novel approach combining quantile regression with nonlinear mixed-effects (QR-NLME) modeling was applied to predict the maximum crown width (cwmax) of three economically important forest species—the European beech (Fagus sylvatica L.), the black pine (Pinus nigra Arn.), and the Calabrian pine (Pinus brutia Ten.) at tree level. A power QR-NLME model was fitted first to a dataset including 1414 European beech trees obtained from 29 randomly distributed sample plots, 770 black pine trees from 25 sample plots, and 1880 Calabrian pine trees from 41 sample plots in Greece, to predict the cwmax at tree level. Additionally, a nonlinear mixed-effects model (NLME) was fitted to the same dataset to predict the average crown width at tree level for all species. In the second stage, the crown competition factor (CCF) was estimated based on the population average response of the cwmax predictions. The proposed approach presented sound results when compared with the outcomes of relevant models from other regions fitted to open-grown tree data, and therefore, it can be well implemented on clustered data structures, in cases of absence of open-grown tree data.
- 7 July 2021
- Published by Inderscience Publishers in International Journal of Sustainable Agricultural Management and Informatics
- Vol. 7 (2) , 111
Creating a spatial knowledge database for protective functions in sustainable forest management: the case of Greece
One of the basic indicators required to assess and monitor sustainable forest management at the national level within the mandatory for the EU countries FOREST EUROPE policy initiative concerns the area occupied by the protective forests. However, within this policy, no operational harmonised definition of the 'protective forest' term has been adopted to date, thus making it difficult to identify and map accurately the forest land area with protective functions. This paper presents a methodological approach for creating a spatial knowledge database for the protective functions related to soil, water, and infrastructure compatible with the FOREST EUROPE policy frame. The approach was implemented in Greece and it was found that about 40% of the country's productive forest land has an increased protection effect on soil and water, and about 15% of it on infrastructure.
- 7 July 2021
- Published by Inderscience Publishers in International Journal of Sustainable Agricultural Management and Informatics
- Vol. 7 (2) , 111
Creating a spatial knowledge database for protective functions in sustainable forest management: the case of Greece
One of the basic indicators required to assess and monitor sustainable forest management at the national level within the mandatory for the EU countries FOREST EUROPE policy initiative concerns the area occupied by the protective forests. However, within this policy, no operational harmonised definition of the 'protective forest' term has been adopted to date, thus making it difficult to identify and map accurately the forest land area with protective functions. This paper presents a methodological approach for creating a spatial knowledge database for the protective functions related to soil, water, and infrastructure compatible with the FOREST EUROPE policy frame. The approach was implemented in Greece and it was found that about 40% of the country's productive forest land has an increased protection effect on soil and water, and about 15% of it on infrastructure.
- Open Access
- 26 May 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (11) , 5998
Height Allometry of Pinus nigra Arn. in Troodos National Forest Park, Cyprus
Total height is one of the basic morphometric tree variables included in all forest management inventories, because it is connected with several forest processes and functions related to the estimation of the woody tree volume and sustainable forest yield. The current research, based on a total sample of 1059 measured Black pine (Pinus nigra Arn.) trees from Cyprus, is an attempt to explore the biological processes related to the tree height allometry of this species and develop a generalized mixed-effects model for tree height prediction. The proposed model, with three additional basic covariates and two random parameters, explained almost 96% of the height variance. The model results showed that although competition and site-connected variables affected the total height, it was the crown base height that explained, to a large degree, the height expression. Through the mixed-effects modeling approach it was possible to explore the complex biological processes related to the tree allometry of Black pine and depict those within a mathematical formulation. The proposed generalized model decreased the error significantly, and therefore it can be used for operational forest management purposes. However, for marginal predictions, use of only the fixed part of the basic model could suffice, since this also provided unbiased parameter estimates.
- 26 May 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (11) , 5998
Open AccessHeight Allometry of Pinus nigra Arn. in Troodos National Forest Park, Cyprus
Total height is one of the basic morphometric tree variables included in all forest management inventories, because it is connected with several forest processes and functions related to the estimation of the woody tree volume and sustainable forest yield. The current research, based on a total sample of 1059 measured Black pine (Pinus nigra Arn.) trees from Cyprus, is an attempt to explore the biological processes related to the tree height allometry of this species and develop a generalized mixed-effects model for tree height prediction. The proposed model, with three additional basic covariates and two random parameters, explained almost 96% of the height variance. The model results showed that although competition and site-connected variables affected the total height, it was the crown base height that explained, to a large degree, the height expression. Through the mixed-effects modeling approach it was possible to explore the complex biological processes related to the tree allometry of Black pine and depict those within a mathematical formulation. The proposed generalized model decreased the error significantly, and therefore it can be used for operational forest management purposes. However, for marginal predictions, use of only the fixed part of the basic model could suffice, since this also provided unbiased parameter estimates.
- Open Access
A Crown Width-Diameter Model for Natural Even-Aged Black Pine Forest Management
Crown size estimations are of vital importance in forest management practice. This paper presents nonlinear models that were developed for crown width prediction of Black pine (Pinus nigra Arn.) natural, pure, even-aged stands in Olympus Mountain, central Greece. Using a number of measured characteristics at tree and plot level from 66 sample plots as independent variables, an attempt was made to predict crown width accurately, initially based on Least Square Analysis. At the second stage, nonlinear mixed effect modeling was performed in order to increase the fitting ability of the proposed models and to deal with the lack of between observations independence error assumption. Based on the same form, a generalized crown width model was developed by including six main regressors, such as the diameter at breast height, the total height, the canopy base height, the basal area, the relative spacing index and the diameter to quadratic mean diameter ratio, while at the final stage, the same model was expanded to mixed-effect. The proposed models were evaluated against independent crown width sample observations that were also obtained from the study area. The results showed that the two types of mixed-effect models performed equally well and, therefore, we propose those for use in forestry practice. Furthermore, the exact contribution of each inherent variable in crown width allometry was evaluated, thus providing a framework to facilitate field measurements for forest management predictions.
Open AccessA Crown Width-Diameter Model for Natural Even-Aged Black Pine Forest Management
Crown size estimations are of vital importance in forest management practice. This paper presents nonlinear models that were developed for crown width prediction of Black pine (Pinus nigra Arn.) natural, pure, even-aged stands in Olympus Mountain, central Greece. Using a number of measured characteristics at tree and plot level from 66 sample plots as independent variables, an attempt was made to predict crown width accurately, initially based on Least Square Analysis. At the second stage, nonlinear mixed effect modeling was performed in order to increase the fitting ability of the proposed models and to deal with the lack of between observations independence error assumption. Based on the same form, a generalized crown width model was developed by including six main regressors, such as the diameter at breast height, the total height, the canopy base height, the basal area, the relative spacing index and the diameter to quadratic mean diameter ratio, while at the final stage, the same model was expanded to mixed-effect. The proposed models were evaluated against independent crown width sample observations that were also obtained from the study area. The results showed that the two types of mixed-effect models performed equally well and, therefore, we propose those for use in forestry practice. Furthermore, the exact contribution of each inherent variable in crown width allometry was evaluated, thus providing a framework to facilitate field measurements for forest management predictions.
- 6 August 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 21, 107731H
Comparison of three DEM sources: a case study from Greek forests
In this study, we compare ALOS World 3D 30m mesh (AW3D30) which is provided free by Japan Aerospace Exploration Agency (JAXA), European Digital Elevation Model (EUDEM) which is provided free by European Environment Agency (EEA) and the DEM created from digitized contours from the 1/50.000 topographic maps of Hellenic Military Geographic Service (HMGS). The vegetation height of a forest environment affects the elevation data of AW3D30 and EU-DEM, with that in mind, we choose to compare the elevation data in forest fire break lines. The two DSMs, AW3D30 and EU-DEM v1.1 published in 2016 and the spatial resolution is 30m for AW3D30 and 25m for EU-DEM. For the DEM we created from the topographic maps we used 20m-pixel size. The statistical parameters of the three DEMs have examined in 149 forest fire break lines of total length 187,955.8 km. The study area is located in Chalkidiki a part of the Region of Central Macedonia in Northern Greece.
- 6 August 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 21, 107731H
Comparison of three DEM sources: a case study from Greek forests
In this study, we compare ALOS World 3D 30m mesh (AW3D30) which is provided free by Japan Aerospace Exploration Agency (JAXA), European Digital Elevation Model (EUDEM) which is provided free by European Environment Agency (EEA) and the DEM created from digitized contours from the 1/50.000 topographic maps of Hellenic Military Geographic Service (HMGS). The vegetation height of a forest environment affects the elevation data of AW3D30 and EU-DEM, with that in mind, we choose to compare the elevation data in forest fire break lines. The two DSMs, AW3D30 and EU-DEM v1.1 published in 2016 and the spatial resolution is 30m for AW3D30 and 25m for EU-DEM. For the DEM we created from the topographic maps we used 20m-pixel size. The statistical parameters of the three DEMs have examined in 149 forest fire break lines of total length 187,955.8 km. The study area is located in Chalkidiki a part of the Region of Central Macedonia in Northern Greece.
- 6 August 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10773, 107731M
Vertical accuracy comparison of ALOS AW3D30 DSM and trigonometric survey points
Topographical information is fundamental to many geospatial related information and applications on Earth. Remote sensing satellites have the advantage in such fields because they are capable of global observation and repeatedly. One of the newest free of charge global digital surface model (DSM) is ALOS World 3D 30m mesh (AW3D30) and it is provided by Japan Aerospace Exploration Agency (JAXA). The AW3D30 version 1 released on May 2016 and on March 2017 the newer version 1.1 released with changes in specific areas. In Greece, the National Trigonometric Network established by the Hellenic Military Geographic Service (HMGS), the network includes 26,739 trigonometric control points but are not systematically maintained and many do not exist anymore. The trigonometric control points located in areas without vegetation, so the vegetation height does not influence the comparison. This paper calculates the vertical difference of the AW3D30 DSM and the trigonometric survey points of 1st, 2nd, 3rd, and 4th order. Also, a map identifying the areas with low and high height difference is presented.
- 6 August 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10773, 107731M
Vertical accuracy comparison of ALOS AW3D30 DSM and trigonometric survey points
Topographical information is fundamental to many geospatial related information and applications on Earth. Remote sensing satellites have the advantage in such fields because they are capable of global observation and repeatedly. One of the newest free of charge global digital surface model (DSM) is ALOS World 3D 30m mesh (AW3D30) and it is provided by Japan Aerospace Exploration Agency (JAXA). The AW3D30 version 1 released on May 2016 and on March 2017 the newer version 1.1 released with changes in specific areas. In Greece, the National Trigonometric Network established by the Hellenic Military Geographic Service (HMGS), the network includes 26,739 trigonometric control points but are not systematically maintained and many do not exist anymore. The trigonometric control points located in areas without vegetation, so the vegetation height does not influence the comparison. This paper calculates the vertical difference of the AW3D30 DSM and the trigonometric survey points of 1st, 2nd, 3rd, and 4th order. Also, a map identifying the areas with low and high height difference is presented.
- Open Access
- 28 February 2018
- Published by David Publishing Company in Journal of Environmental Science and Engineering - A
- Vol. 7 (2)
Rehabilitation of Semi-mountainous Forest Area Using Bioclimatic Forest Constructions in Greece
- 28 February 2018
- Published by David Publishing Company in Journal of Environmental Science and Engineering - A
- Vol. 7 (2)
Open AccessRehabilitation of Semi-mountainous Forest Area Using Bioclimatic Forest Constructions in Greece
- Open Access
- 28 February 2018
- Published by David Publishing Company in Journal of Environmental Science and Engineering B
- Vol. 7 (2)
Design and Construction of a Forest Village in Greece
- 28 February 2018
- Published by David Publishing Company in Journal of Environmental Science and Engineering B
- Vol. 7 (2)
Open AccessDesign and Construction of a Forest Village in Greece
- Open Access
- 26 April 2016
- Published by Italian Society of Sivilculture and Forest Ecology (SISEF) in iForest - Biogeosciences and Forestry
- Vol. 9 (2) , 344-353
Public attitudes towards the use of transgenic forest trees: a cross-country pilot survey
Information on public attitudes towards the use of transgenic trees in forest plantations is important in the decision-making process and policy implementation for safe tree development, particularly at the EU level. In Europe, the use of transgenic forest trees is very limited and therefore such information is completely lacking. To address this issue within the FP0905 European COST Action on the Biosafety of Transgenic Forest Trees a pioneer cross-country pilot survey on public attitudes towards the use of transgenic forest trees was conducted using young population as a focus group. This was decided mainly because this focus group represents the future consumers, policy makers or developers. Specifically, the survey aimed to: i) assess the level of young people’s knowledge about transgenic forest trees, ii) identify issues of concern to them regarding the cultivation of transgenic forest trees and iii) explore whether they approve or disapprove of the use of transgenic forest trees in plantations. Purposive sampling was performed and university students of different disciplines were included in the research as sampling subjects. In total, 1868 completed questionnaires from 15 European and non-European countries were analyzed. The young educated people that took part in the survey appeared to approve of the use of transgenic forest trees in plantations and would be willing to buy forest transgenic products. The potential loss of biodiversity due to a risk of gene flow between transgenic and wild trees was seen as the safety issue of most concern when considering the commercial release of transgenic forest trees. However, a serious perceived lack of knowledge about potential benefits and risks of the cultivation of transgenic forest trees was recorded in most of the countries. K-means clustering was implemented on respondents’ positive responses to identify potential country patterns. No differences in patterns of public attitude towards the acceptance of the commercial growing of transgenic forest trees were observed between European and non-European countries. Extended research on public attitude issues towards the use of transgenic forest trees is strongly recommended as a basis for policy implementation on safe tree development.
- 26 April 2016
- Published by Italian Society of Sivilculture and Forest Ecology (SISEF) in iForest - Biogeosciences and Forestry
- Vol. 9 (2) , 344-353
Open AccessPublic attitudes towards the use of transgenic forest trees: a cross-country pilot survey
Information on public attitudes towards the use of transgenic trees in forest plantations is important in the decision-making process and policy implementation for safe tree development, particularly at the EU level. In Europe, the use of transgenic forest trees is very limited and therefore such information is completely lacking. To address this issue within the FP0905 European COST Action on the Biosafety of Transgenic Forest Trees a pioneer cross-country pilot survey on public attitudes towards the use of transgenic forest trees was conducted using young population as a focus group. This was decided mainly because this focus group represents the future consumers, policy makers or developers. Specifically, the survey aimed to: i) assess the level of young people’s knowledge about transgenic forest trees, ii) identify issues of concern to them regarding the cultivation of transgenic forest trees and iii) explore whether they approve or disapprove of the use of transgenic forest trees in plantations. Purposive sampling was performed and university students of different disciplines were included in the research as sampling subjects. In total, 1868 completed questionnaires from 15 European and non-European countries were analyzed. The young educated people that took part in the survey appeared to approve of the use of transgenic forest trees in plantations and would be willing to buy forest transgenic products. The potential loss of biodiversity due to a risk of gene flow between transgenic and wild trees was seen as the safety issue of most concern when considering the commercial release of transgenic forest trees. However, a serious perceived lack of knowledge about potential benefits and risks of the cultivation of transgenic forest trees was recorded in most of the countries. K-means clustering was implemented on respondents’ positive responses to identify potential country patterns. No differences in patterns of public attitude towards the acceptance of the commercial growing of transgenic forest trees were observed between European and non-European countries. Extended research on public attitude issues towards the use of transgenic forest trees is strongly recommended as a basis for policy implementation on safe tree development.