SASimin Asadabadi

Simin Asadabadi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Simin Asadabadi has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Salinity and alkalinity impacts on the interfacial activity of crude oil–water systems using individual and mixtures of a surface-active ionic liquid and conventional surfactant

    by Simin Asadabadi, Mona Kharazi, Javad Saien

    Surface-active ionic liquids (SAILs) in combination with conventional surfactants offer promising effects on the interfacial properties of crude oil–water systems. Relevantly, aqueous phase salinity and alkalinity exert inevitable impacts. This study explores the impacts of salt and salt–alkali media on the interfacial behavior of a long-chain cationic imidazolium-based SAIL, [C12mim][Cl], and the anionic conventional surfactant SDS, individually and in mixtures. Results indicate that SDS alone exhibits higher efficiency, and exposure to salty and/or alkaline media gives rise its activity through a significant reduction in interfacial tension and critical micelle concentration (CMC). Using a surfactant mixture, adaptive charge interactions between surfactants yield synergistic effects in IFT and CMC reductions with optimal performance at a SAIL mole fraction of 0.3. Salt and alkali amplify interfacial activity, resulting in IFT reductions from 26.5 to 1.6 mN m−1 with 3.0 wt% NaCl and further down to 0.2 mNˑm−1 with 3.0 wt% NaCl and 1.5 wt% NaOH. Besides, corresponding CMCs dropped substantially, from 9.8 × 10−3 and 9.4 × 10−3 mol dm−3 to 2.3 × 10−3 in a saline medium and 1.5 × 10−3 mol dm−3 in a saline–alkaline medium, respectively. Theoretical analyses, based on the Gibbs adsorption equation and the Rosen model, were employed to evaluate the adsorption characteristics of the individual surfactants and their mixtures, revealing reasonable key parameters that provide deeper insights into basic concepts.


  • Open Access

    Enhanced interfacial activity by maximizing synergy between long-chain ionic liquid and conventional surfactant for enhanced oil recovery

    by Simin Asadabadi, Javad Saien, Mona Kharazi

    Conventional surfactants encounter limitations for application in oil reservoirs; however, combining surface-active ionic liquids (SAILs) with conventional surfactants presents an opportunity to enhance the interfacial properties of crude oil–water systems, giving also economic benefits. Accordingly, blends of a long-chain cationic imidazolium-based SAIL, namely, 1-dodecyl-3-methylimidazolium chloride, [C12mim][Cl], and the anionic conventional surfactant, sodium dodecyl sulfate were investigated here. Initial experiments with individual surfactants revealed efficient adsorption and consistent adsorption parameters. Subsequently, the use of mixtures showed synergistic effects for interfacial tension reduction of up to 86.0%, and critical micelle concentration reduction of 72.1% compared to the linear contribution of individual components. These improvements were observed at the optimal SAIL mole fraction of 0.3 and the mixture concentration of 0.003 mol dm−3, resulting in interfacial tension reduction from 29.1 to 1.6 mN m−1 as well as achieving a low critical micelle concentration of 2.7 × 10−3 mol dm−3 coinciding with 83.6% synergy. These findings underscore the favorable interactions between oppositely charged components in the mixtures, amplifying their activity beyond the linear contributions of the individual surfactants. Additionally, theoretical assessments using the Gibbs adsorption equation and the Rosen model provided insight into the adsorption behavior of both the individual surfactants and their mixtures, together with reasonable variations in the corresponding parameters.


  • Retracted

    RETRACTED: Gas separation improvement of PES / PSF / PVP blend mixed matrix membranes inclusive of amorphous MOFs by O 2 plasma treatment

    by Simin Asadabadi, Elahe Ahmadi Feijani, Leila Ahmadian‐Alam

    In this study, crystalline UiO‐66 and NH 2 ‐UiO‐66 metal organic frameworks (MOFs) were prepared by typical solvothermal method and then were transformed into amorphous phase by using ball milling process. The prepared MOFs were incorporated into tertiary polymer blend matrix including polyethersulfone/polysulfone/polyvinylpyrrollidone (PES/PSF/PVP:40/40/20 wt%) to examine gas separation performance of constructed mixed matrix membranes (MMMs). The synthesized MMMs were analyzed by FT‐IR, SEM, TGA, XRD, AFM, and DSC methods and also by pure gas permeation test for CO 2 and CH 4 gases. Afterwards, the surface of amorphous MOF‐contained MMMs was influenced by O 2 plasma to thrive polar groups of membranes surface. The best gas separation result owned to amorphous NH 2 ‐UiO‐66 comprised MMM treated by O 2 plasma for 3 min at 600 W with CO 2 permeability and CO 2 /CH 4 selectivity of 10.96 Barrer and 97.91, respectively. The mentioned MMM showed CO 2 permeability and CO 2 /CH 4 selectivity of 8.69 Barrer and 75.56 before plasma treatment which were 170 and 50% higher than those of pristine PES/PSF/PVP blend membrane.


  • Open Access

    Anchoring carboxylated pineapple peel cellulose and EDTA onto magnetic (3-aminopropyl)triethoxysilane to effective diminish copper(II) and zinc(II) from polluted water

    by Hanan Sayahi, Simin Asadabadi

    In recent decades, remediation of polluted water has shifted towards the enhancement of environmentally friendly adsorbents with robust stability. In this regard, a biosorbent was designed and synthesized by anchoring carboxylated pineapple peel cellulose and ethylenediaminetetraacetic acid onto amino-silane modified Fe3O4 nanoparticles. A vast number of carboxyl and amino active groups in the structure of biosorbent led to the efficient adsorption of Cu2+ and Zn2+ from polluted water. The biosorbent was characterized by FE-SEM, TEM, EDX, XRD, FT-IR, BET, VSM and TGA techniques. The influence of pH, temperature and biosorbent dosage on the cation removal was investigated by Central Composite Design. The maximum uptake% was 93.18 and 96.30% for Cu2+ and Zn2+, respectively. Coordination and electrostatic attraction were proposed as the main reasons for the removal of heavy metal cations. Astonishingly, the adsorption of Zn2+ was ultrafast and completed within 40 s and it took 420 s for removal of Cu2+. External surface biosorption, the intra-particle diffusion and the diffusion through the smaller pores and slits, in sequence, were the dominant steps in the adsorption of each cation. Modified pseudo-n-order and modified Langmuir-Freundlich were the best models to describe kinetics and equilibrium results. The maximum adsorption capacity of biosorbent for Zn2+ was higher than one for Cu2+ (153.9 versus 149.4 mg·g-1). Besides, the regenerating of biosorbent was successfully accomplished for five cycles using a solution of EDTA in the presence of ultrasonic waves.

  • Open Access

    Design and Synthesis of Magnetic Immobilized Pineapple Cellulose/EDTA for Removal of Copper(II) and Zinc(II) by Coordination

    by Hanan Sayahi, Simin Asadabadi

    In recent decades, treatment of polluted water has shifted towards the enhancement of environmentally friendly adsorbents. In this regard, a biosorbent originated from pineapple peel cellulose was synthesized and used for the adsorption of Cu2+ and Zn2+. The magnetic (3-aminopropyl)triethoxysilane was designated to immobilize modified cellulose and ethylenediaminetetraacetic acid. The biosorbent was characterized by FE-SEM, TEM, EDX, XRD, FT-IR, BET, VSM and TGA techniques. The influence of pH, temperature and biosorbent dosage on the cation removal was investigated by Central Composite Design. The maximum uptake% was 93.18 and 96.30% for Cu2+ and Zn2+, respectively. Coordination and electrostatic attraction were proposed as the main reasons for the removal of heavy metal cations. The adsorption of Zn2+ was ultrafast and completed within 40 s and it took 420 s for totally removal of Cu2+. External surface biosorption, the intra-particle diffusion and the diffusion through the smaller pores and slits, in sequence, were the dominant steps in the adsorption of each cation. Modified pseudo-n-order and modified Langmuir-Freundlich were the best models to describe kinetics and equilibrium results. The maximum adsorption capacity of biosorbent for Zn2+ was higher than one for Cu2+ (153.9 versus 149.4 mg·g-1). The regenerating of biosorbent was successfully accomplished for five cycles using a solution of EDTA in the presence of ultrasonic waves.

  • Review on Amphiphilic Ionic Liquids as New Surfactants: From Fundamentals to Applications

    by Mona Kharazi, Javad Saien, Simin Asadabadi

    The demand for lowering interfacial tension (IFT) in different processes has persuaded researchers to use stable and resistant surfactants with low environmental impact. For this purpose, surface-active ionic liquids (SAILs) have attracted much attention owing to their good amphiphilic nature and prominent properties like recyclability and high performance under harsh conditions. This review initially explains how the IFT and critical micelle concentration of different systems vary in the presence of different SAILs with a variety of alkyl chain lengths, head groups, and counter anions. Towards this aim, some physicochemical properties of SAILs as well as the corresponding theoretical aspects of adsorption are considered. Then, recent advances in utilizing SAILs for reducing IFT of different chemical systems are surveyed. Relevantly, the role of important operating parameters of temperature, pH, presence of electrolytes, and the chemical nature of involved phases are adequately discussed. Further, an overview of different SAILs applications in stabilization, separation, and in petroleum industries is scrutinized. To allow better judgment, precise comparisons between different types of SAILs and conventional surfactants are provided. Finally, challenges and possible directions of future research on SAILs are highlighted.


  • Open Access

    Magnetic Nanocomposites Containing Low and Medium-Molecular Weight Chitosan for Dye Adsorption: Hydrophilic Property Versus Functional Groups

    by Masouma Mirzai, Simin Asadabadi

    The azo dye removal from polluted water is vital from a sustainable viewpoint. In this study, we investigated the influence of chitosan molecular weight on the adsorptive removal of basic blue 41. For preparing nanocomposite containing medium-molecular weight chitosan (NC(M)), cross-linking of chitosan was done using diethylenetriaminepentaacetic acid, silica-modified magnetite nanoparticles and graphene oxide. Techniques including FT-IR, XRD, FESEM, TGA/DTG, VSM and N2 adsorption/desorption isotherm were applied for characterization of NC(M). The adsorption behavior of synthesized NC(M) was compared with as-prepared adsorbent containing low-molecular weight chitosan (NC(L)) (Asadabadi 2021). The experimental design was carried out using the Central Composite Design. The effect of initial pH, temperature and adsorbent concentration on the percentage of dye removal were examined and the optimum values of variables were determined. Despite NC(M) which had maximum 31% dye removal, NC(L) led to approximately 95% adsorptive removal at optimum conditions. An increase in the monomer number of chitosan caused to reduce hydrophilic property of NC(M), which in turn resulted in a repulsion force between adsorbent and dye. However, H-bonding, coulumbic attraction and pi-stacking interactions contributed in the adsorption mechanism of NC(L). The kinetics study showed that about 30 min necessitated reaching the equilibrium and the rate-limiting steps changed from film diffusion to intra-particle diffusion as time passed. The kinetics data were satisfactorily fitted by the modified pseudo-n-order model. The maximum adsorption capacity of NC(L) was obtained 55.87 mg·g− 1. The modified Langmuir-Freundlich isotherm was the best model to reproduce data. NC(L) was recovered seven times without dramatic changes in its adsorption efficiency.