KCKaushalendra Chaturvedi

Kaushalendra Chaturvedi

*This is an algorithmically generated author record based on publicly available information.

Kaushalendra Chaturvedi has a total of 34 co-authors. Here are the top co-authors by number of shared publications:

  • Harsh S. Shah

    J-Star Research Inc., Cranbury, USA

    6 shared publications
  • Harsh S. Shah

    Porton Pharma Solutions, Cranbury, USA

    4 shared publications
  • Kenneth Morris

    Lachman Institute for Pharmaceutical Analysis, Long Island University, Brooklyn, New York, 11201, USA.

    4 shared publications
  • Kenneth R. Morris

    Department of Pharmaceutical Sciences, Arnold and Marie Schwartz College of Pharmacy, Long Island University, 75 Dekalb Avenue, Brooklyn, New York 11201, United States

    3 shared publications
  • Simon Bates

    Department of Pharmaceutical Sciences, Arnold and Marie Schwartz College of Pharmacy, Long Island University, 75 Dekalb Ave, Brooklyn, New York 11201, United States

    3 shared publications
  • Rahul V. Haware

    Division of Pharmaceutical Sciences, Arnold & Marie Schwartz College of Pharmacy and Health Sciences, The Long Island University, Brooklyn, NY-11201, USA

    2 shared publications

Latest Publications

  • Open Access

    Enhancement of material attributes of poorly compressible metformin hydrochloride through coprocessing with hydroxypropyl cellulose (HPC-L) using coprecipitation (CPT)

    by Kaushalendra Chaturvedi, Pasaorn Pongkulapa, Xiaoyi Ding, Harsh S. Shah, San Kiang, Veeran Kadajji

    Coprocessing involves integration of multiple substances to improve the physical, chemical, mechanical, and biopharmaceutical properties of a material. Coprocessing is a promising technique in the pharmaceutical industry which support both drug substance and drug product processes. When active pharmaceutical ingredients (APIs) are coprocessed with excipients, it can enable direct compression and continuous manufacturing. Hydroxypropyl cellulose (HPC-L), a commonly used excipient in pharmaceutical formulations, can enhance drug stability, solubility, and bioavailability. In this study, we have employed coprecipitation (CPT) to coprocess metformin hydrochloride (MET) with HPC-L, resulting in the formation of agglomerates with improved physical attributes without any risk of polymorphic changes. Acetone/acetonitrile and heptane were used as solvent and antisolvent, respectively. Screening study revealed that the use of a rotor stator helps to control the size of metformin hydrochloride and HPC-L agglomerates (M-CPT) without negatively impacting bulk density and powder flow properties. The CPT agglomerates showed residual solvent levels within the specified ICH limits. Powder rheology results demonstrated a sixfold increase in FFC of M-CPT compared to neat MET. The compressibility, tabletability, compactability, and “In-Die” Heckel analysis data further suggested that the M-CPT agglomerates are directly compressible with no observable changes in the dissolution profile of MET. Overall, this study demonstrates application of CPT approach to tune the physical and mechanical properties, and HPC-L can be used as an excipient of choice for CPT technique to improve the compressibility and flowability of APIs. Graphical Abstract


  • Bayesian statistical approaches to drug product variability assessment and release

    by Qing Cai, Linas Mockus, David LeBlond, Xu Sun, Hui Wei, Harsh S. Shah, Kaushalendra Chaturvedi, Rusha Sardhara, Kajalajit Nahar, Rania Khalil, et al.


  • Modeling of Adhesion in Tablet Compression at the Molecular Level Using Thermal Analysis and Molecular Simulations

    by Kaushalendra Chaturvedi, Harsh S. Shah, Kenneth R. Morris, Rutesh H. Dave

    The molecular basis of adhesion leading to sticking was investigated by exploring the correlation between thermal analysis and molecular simulations. It is hypothesized that intermolecular interactions between a drug molecule and a punch face are the first step in the adhesion process and the rank order of adhesion during tablet compression should correspond to the rank order of the energies of these interactions. In the present study, the sticking propensity was investigated using ibuprofen, flurbiprofen, and ketoprofen as model substances. At the intermolecular level, a thermal analysis model was proposed as an experimental technique to estimate the work of adhesion between ibuprofen, flurbiprofen, and ketoprofen in a DSC aluminum pan. The linear relationship was established between the enthalpy of vaporization and sample mass to demonstrate the accuracy of the instruments used. The threshold mass for ibuprofen, flurbiprofen, and ketoprofen was determined to be 107, 112, and 222 mu g, respectively, after three replicate measurements consistent with the experimental results. Ketoprofen showed a 2-fold higher threshold mass compared to ibuprofen and flurbiprofen, which predicts that ketoprofen should have the highest sticking propensity. Computationally, the rank order of the work of adhesion between ibuprofen, flurbiprofen, and ketoprofen with the metal surface was simulated to be -75.91, 44.75, and -96.91 kcal/mol, respectively, using Materials Studio. The rank order of the interaction between the drug molecule and the iron superlattice decreases in the order ketoprofen > ibuprofen > flurbiprofen. The results indicate that the thermal model can be successfully implemented to assess the sticking propensity of a drug at the molecular level. Also, a new molecular simulation script was successfully applied to determine the interaction energy of the drug molecule upon contact with iron.


  • Predictive Performance Comparison of Computed Linear and Quadratic Multivariate Models for In-Situ UV Fiber Optics Tablet Dissolution Testing

    by Rusha Sardhara, Kaushalendra Chaturvedi, Harsh S. Shah, Bhavani Prasad Vinjamuri, Antoine Al-Achi, Kenneth R. Morris, Rahul V. Haware


  • Molecular Insights into Warfarin Sodium 2-Propanol Solvate Solid Form Changes and Disproportionation Using a Low Volume Two-Stage Dissolution Approach

    by Harsh S. Shah, Kaushalendra Chaturvedi, Rutesh H. Dave, Kenneth R. Morris

    The current research work focuses on understanding the reported discrepancies and our observations in the dissolution profiles of warfarin sodium tablets and potential patient-based failure modes during oral warfarin therapy. It was hypothesized that freely soluble crystalline warfarin sodium (WARC) at first transforms into noncrystalline warfarin sodium (WARNC) under stress conditions. The WARC → WARNC conversion facilitates the rapid formation of the poorly soluble unionized form, which could lead to dissolution failures and potential poor in vivo performance. Depressed warfarin concentrations locally in the gastrointestinal tract (GIT) may in turn lead to inadequate absorption and thereby affect bioavailability. A low volume two-stage dissolution method was developed to mimic in vivo GIT conditions. Warfarin sodium tablets exposed to room temperature and 75% relative humidity for 1 week showed approximately 23% decrease in drug release. The decline in drug release supports the hypothesis that WARNC is converted to the unionized form faster than WARC does under the same conditions. Solid state characterization (powder X-ray diffractometry and differential scanning calorimetry) data demonstrated the disproportionation of warfarin sodium to unionized warfarin after solubility and dissolution studies. The findings support the hypothesis and a possible failure mode of warfarin sodium tablets. This work is a second case study from our laboratory on narrow therapeutic index drug products in which the instability of the solid state of the drug substance is potentially responsible for observed clinical failures.


  • New Insights on Warfarin Sodium 2-Propanol Solvate Solid-State Changes Using a Multivariate Approach

    by Harsh S. Shah, Kaushalendra Chaturvedi, Rutesh H. Dave, Simon Bates, Rahul V. Haware, Kenneth R. Morris


  • Open Access

    Contribution of Crystal Lattice Energy on the Dissolution Behavior of Eutectic Solid Dispersions

    by Kaushalendra Chaturvedi, Harsh S. Shah, Kajal Nahar, Rutesh Dave, Kenneth R. Morris

    In the literature, it is reported that eutectics lead to the enhanced dissolution of a poorly soluble compound. However, the solubility theory suggests that since crystal structures of two components are unchanged that all else being equal, the dissolution rates of a fused mixture (FM) should be the same as a physical mixture (PM). The influence of crystal lattice energy on dissolution profiles was investigated using the PM and FM. Experimental phase diagrams constructed using differential scanning calorimetry data were compared with those theoretically derived. Deviation of the experimental phase diagram curves from the theoretical model indicates the nonideal behavior of both systems (ibuprofen/poly(ethylene glycol)-6000 and acetaminophen/caffeine). Both the binary systems showed an increase in the dissolution rate of the PM and FM. However, the dissolution from the PM was comparable with the FM’s dissolution profile. The theoretical solubility calculations using the modified solubility equation showed that the use of the eutectic temperature instead of the drug’s melting point should give a 3–4-fold increase in drug solubility. However, the correlation between dissolution and solubility calculation showed that the FM did not improve the dissolution when compared with the respective PM’s dissolution profile. The proposed explanation is that the unchanged crystal lattice energy in eutectics still limits the solubility and therefore the dissolution rate.


  • A threefold superstructure of the anti-epileptic drug phenytoin sodium as a mixed methanol solvate hydrate

    by Harsh S. Shah, Kaushalendra Chaturvedi, Matthias Zeller, Simon Bates, Kenneth Morris

    Phenytoin sodium, a salt of 5,5-diphenylimidazolidine-2,4-dione, or phenytoin, is commercially available in various dosage forms for its anti-epileptic properties to treat and prevent seizures. The title compound, poly[aquatris(μ3-4,4-diphenyl-2,5-dioxoimidazolidin-1-ido)trimethanoltrisodium(I)], [Na3(C15H11N2O2)3(CH4O)3(H2O)1.08] n , a methanol solvate and hydrate of phenytoin sodium, forms a modulated crystal structure that consists of a supercell made up of three close-to-identical repeat units. Each of the basic fragments consists of one phenytoin anion, a sodium cation, and either a methanol, or a methanol and a water molecule coordinated to the sodium ion, yielding a formula unit of Na(C15H11N2O2)(CH3OH) x (H2O) y for each of the three segments (x, y = 0 or 1; x + y = 1 or 2). Modulation along the b axis is introduced due to the presence or absence of water or methanol molecules at sodium and by the alternating torsion angles of one of the two phenytoin phenyl rings. Individual segments within the asymmetric unit are linked by covalent Na—O and Na—N bonds, with each sodium ion coordinated to one anionic amide N atom and three keto O atoms. The Na—N and one of the Na—O bonds connect (C15H11N2O2)·Na units along the modulation direction, creating an infinite [(C15H11N2O2)·Na]_{\infty} chain that is further stabilized by intramolecular N—H...O hydrogen bonding parallel to [010]. The second Na—O bond connects this chain with a symmetry-equivalent copy of itself created by a screw-axis operation, yielding double strands of [(C15H11N2O2)·Na]_{\infty} chains. Two of these double strands, propagating in opposite directions, constitute the content of the unit cell. Neighboring double strands are connected with each other to form layers perpendicular to the a axis, tethered together via O—H...O hydrogen bonds involving the water and methanol molecules. In addition to modulation, each of the repeat units also exhibits disorder of the modulated segments. Phenyl rings of each repeat unit are rotationally disordered, and sodium-coordinated methanol and water molecules are also positionally disordered and/or partially occupied. The solvated structure reported here, while not matching the patterns reported for any of the known forms of phenytoin sodium, does provide a first insight into the complications and complexities involved in resolving the structure of anhydrous phenytoin sodium.


  • New Insights on Solid-State Changes in the Levothyroxine Sodium Pentahydrate during Dehydration and its Relationship to Chemical Instability

    by Harsh S. Shah, Kaushalendra Chaturvedi, Mazen Hamad, Simon Bates, Ajaz Hussain, Kenneth Morris

    Levothyroxine sodium pentahydrate (LEVO) tablets have been on the US market since the mid-twentieth century and remain the most highly prescribed product. Unfortunately, levothyroxine sodium tablets...


  • Influence of processing methods on physico-mechanical properties of Ibuprofen/HPC-SSL formulation

    by Kaushalendra Chaturvedi, Bhavin Y. Gajera, Ting Xu, Harsh Shah, Rutesh H. Dave

    The objective of the present study was to investigate the influence of processing methods on the physical and mechanical properties of formulations containing Ibuprofen and HPC-SSL. The powder blends, containing Ibuprofen and HPC-SSL in ratio of 9:0.5, were processed using melt granulation (MG) by hot melt extrusion (HME) and wet granulation (WG) by high shear mixer. Formulated granules and powder blends were compressed into round flat faced tablets using Riva Piccola tablet press. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD) studies proved that granulation process did not significantly alter the crystallinity of Ibuprofen, however, particle density and flow properties were significantly improved. Scanning electron microscopy (SEM) and particle size analysis corroborate with the findings that the flow characteristics of granules from MG were relatively superior to other formulations. Formulations were investigated for out-of-die compaction behaviour using Heckel, Kawakita, and CTC profile analysis. Detailed examination revealed that all three formulations differed in particle size due to the granulation, thus conferring to different compaction behaviour. In WG and MG, granulation offered an increase in particle size resulting in high compressibility along with deformation at low compression pressure. This results into low yield pressure, low yield strength, and higher densification, as compared with dry blend. The current work provides an insight into factors affecting physical and mechanical properties tablets, which can facilitate the rational selection of suitable change in processing method instead of changing excipients.