HZHasan. U. Zaman

Hasan. U. Zaman

*This is an algorithmically generated author record based on publicly available information.

Hasan. U. Zaman has a total of 122 co-authors. Here are the top co-authors by number of shared publications:

  • Moonmoon Ahmed

    Department of Electrical and Computer Engineering, North South University, Plot-15, Block-B, Bashundhara, Dhaka, Bangladesh

    2 shared publications
  • Rafiya Hossain

    Department of Electrical and Computer Engineering, North South University, Plot-15, Block-B, Bashundhara, Dhaka, Bangladesh

    2 shared publications
  • Syed Ahsanul Karim

    2 shared publications
  • Tania Alauddin

    Department of Electrical and Computer Engineering, North South University, Dhaka, Bangladesh

    2 shared publications
  • A S M Faruk Abdullah

    Department of Electrical and Computer Engineering, North South University, Dhaka, Bangladesh

    1 shared publication
  • A. S. M. Ittehad

    Department of Electrical and Computer Engineering, Northsouth University, Dhaka, Bangladesh

    1 shared publication

Latest Publications

  • Design of a Scalable Low-Power 1-Bit Hybrid Full Adder for Fast Computation

    by Mehedi Hasan, Jobayer Hossein, Mainul Hossain, Hasan U. Zaman, Sharnali Islam

    A novel design of a hybrid Full Adder (FA) using Pass Transistors (PTs), Transmission Gates (TGs) and Conventional Complementary Metal Oxide Semiconductor (CCMOS) logic is presented. Performance analysis of the circuit has been conducted using Cadence toolset. For comparative analysis, the performance parameters have been compared with twenty existing FA circuits. The proposed FA has also been extended up to a word length of 64 bits in order to test its scalability. Only the proposed FA and five of the existing designs have the ability to operate without utilizing buffer in intermediate stages while extended to 64 bits. According to simulation results, the proposed design demonstrates notable performance in power consumption and delay which accounted for low power delay product. Based on the simulation results, it can be stated that the proposed hybrid FA circuit is an attractive alternative in the data path design of modern high-speed Central Processing Units.


  • The Design of a Novel Multi-Purpose Fire Fighting Robot with Video Streaming Capability

    by Aowrongajab Uaday, Nazmul Islam Shuzan, Saffan Shanewaze, Rakibol Islam Rakib, Hasan U. Zaman

    In this work we introduce a novel design of a multi-purpose fire-fighting robot which, with the help of a streaming video camera attached to it, transmits live video from its surroundings to a remote location from where the robot can be controlled. The robot can be mobilized and directed to the spot of the fire and throw water at the fire. It uses RF signal for communication and it is capable of performing three different functions related to firefighting operation. First, it can remove smoke from the location of fire using a suction vacuum fan and a cylinder attached to it, so people do not suffocate from smoke inhalation. Second, it takes continuous snaps of its surroundings to detect human faces using Viola-Jones face detection algorithm, so the rescue squad can know from a safe distance if there are trapped people who need to be rescued. Third, it can throw water at the fire at any angle using a rotating nozzle controlled by a remotely controlled servo motor. This multi-purpose fire-fighting robot is inexpensive but reliable. It can effectively reduce the human risk of fire-fighting operation. The design of the robot is cost effective, which makes it especially attractive for deployment in developing countries.


  • A Multifarious Design of a Microcontroller Based Home Security and Automation System

    by Ahmed Rohani Islam, Kajol Bhowmick, Debalina Sikder, Hasan U. Zaman

    This research aims to provide low cost, efficient automation and security system for home by using Arduino. Home automation means controlling the activities of home appliances and features automatically in a predetermined technique. It initially involves the control and automation of systems that ensure human comforts such as lighting, fire extinguisher, air conditioning, and security. This smart technology helps to get desired security and brings comfort in daily life. Commercial home automation systems are still not affordable for middle -class families in developing countries. Thankfully, with the availability of cheap microcontrollers, like Arduino, it has enabled an easy implementation of low-cost home automation systems including all the features those are added to those high end and commercial devices for home automation and security management. In this paper, we present a simple, low cost and multi-functional home automation system based on Arduino microcontroller. The whole system can be operated with the help various effective sensors which detect problems and on the other hand, takes a step to fix them. This project also includes a Bluetooth module and Arduino Bluetooth controller application with which the functions are executed.


  • A Low-Cost and Portable Electrocardiogram (ECG) Machine for Preventing Diagnosis

    by Rafaeal Hossain Rakin, Asad Siam, Rafayet Hossain, Hasan U. Zaman

    Electrocardiogram (ECG) machines observe the electrical activity of the heart using electrodes on the skin surface and extract vital information about its functionality. Observations made through an ECG machine are usually recorded and is used to diagnose heart-related disorders. Typically, medically usable ECG machines are expensive thus the service is not easily affordable and accessible for the mass in developing countries like Bangladesh. This research designs a low-cost and portable ECG machine which could be a prototype, if successful in overcoming healthcare regulations, to enable easy observations variations of an Electrocardiogram among the mass. The entire system is comprised of an analog circuit and a processing unit. Primarily, the signal from the body is sensed using bio-electro-potential sensors or more widely known AgCl electrodes. Then an analog circuit retrieves and amplifies the signals received from the body to enable further processing. Moreover, a major component of the processing unit is to enable users to see the signal and allow the scope for a more precise output signal through further filtration both on the machine and over the web. The design used is effective, cheap, and easily doable so that it can be easily replicable.


  • Implementation of a Free Space Laser Communicator

    by M. Rashid Alam, Saif Khan, Shahida Siddique, Hasan U. Zaman

    Any free space laser communicator has to face the issue of attenuation over an air channel as the distance gets larger. By using FSK (frequency shift keying) we can improve that situation. FSK modulation scheme is inherently more resistant to noise than OOK (On Off Keying) which is currently used in optical communication. By implementing FSK in an optical communication system we can get more range than the solutions currently available in the market. In this paper we show how we built an BFSK modulated free space laser-based data transmitter and receiver using cheap readily available components.

  • A Novel Design of a Multi-DOF Mobile Robotic Helping Hand for Paralyzed Patients

    by Nixon Dutta, Joyeta Saha, Faysal Sarker, Hasan U. Zaman

    A mobile robotic helping hand can help paralyzed and handicapped people to live a normal life than what they are often subjected to. The goal of this research is to design a robotic helping hand that can help paralyzed patients who cannot move lower part of the body. It is a Multi-DOF (Multiple Degrees of Freedom) robotic hand mounted on a robotic cart where both are controlled wirelessly by hand gestures. The activity and outfit of robotic hand look like a human hand. The Bluetooth transmitter circuits are mounted on a pair of hand gloves. The left glove is used for the cart and the right one is for the robotic arm. The sensors (gyroscopes, flex sensors and potentiometers) sense the patient's hand, wrist, palm and finger movement. The transmitter circuit sends the collected data wirelessly to the receiver circuits mounted on the robotic cart and hand. The robotic arm copies the patient's movement and gestures in real time. The designed system can be used to grab and move things and also for cooking and babysitting. This device can make the lives of paralyzed and handicapped people more comfortable and independent. It is a novel integrated solution that offers many different functionalities in a low-cost implementation.


  • A Novel Design and Implementation of Automated Feeding Mechanism in Fish Aquariums

    by Mohammad Abdul Hye, Manjurul Akter, Atiq Mohammad Jahangir, Hasan U. Zaman

    Smart fish feeding is used in the fishery business for its efficiency and standard maintenance. A proper device consisting of both manual operation and remote access in the context of household aquariums is not available in the market. We have designed a device which enables both manual and automated operation using a microcontroller. The user can easily set the time with the keypad to dispense food in the aquarium. It is also possible to remotely control the food dispenser via a website. The device has two chambers, the top one holds the fish food and the bottom one contains the motor operated rotating fish food dispenser. A servomotor controls the amount of food that can enter the bottom chamber from the top chamber. The rotating mechanism in the bottom chamber has a worm nail with spiral grooves, which dispenses the right amount of food to the aquarium water when the nail is rotated clockwise using a 12 volt gear motor. Overall, the design is low-cost, compact, easy to move and can be latched to any aquarium easily. This device should be very useful to people who leave their houses for a prolonged period for vacations or official business.


  • Auto-Moto Shoes: An Automated Walking Assistance for Arthritis Patients

    by Kazi Kowshin Raihana, Sabbir Hossain, Tahsan Dewan, Hasan U. Zaman

    Severe Arthritis is an inflammatory disease that restricts the walking ability of the patients on uneven surfaces. This paper describes the design of an easy accessible automated solution named Auto (Automated) - Moto (Motorized) Shoes for Arthritis patients so that they can walk on uneven surface without hurting their joints or legs. The Auto-Moto Shoes aim to provide an Arthritis patient comfort at walking by adjusting its sole height according to the ground topography. This device uses IR sensors to measure the ground level unevenness under the sole and control three servos underneath it for pushing down or pulling up the parts of its bottom sole accordingly. It uses an Arduino microcontroller which controls the servo motors. As a result the patient enjoys a relatively plain surface to walk on even though the surface may be uneven.


  • A User-Friendly Low-Cost Mobile App Based Home Appliance Control And Circuit Breaker

    by Hasan U. Zaman, Rafiunnisa, Arafat Muhammad Shams

    Along with the constant improvement of different electronic devices, the safety of technicians has also become a matter of great concern, as the lives of technicians are at risk while they work by switching off the circuit breakers, because even after the circuit breaker has been turned off, someone can unknowingly turn it on while the technician is still working. There must be a system for ensuring security for the technicians. Also, people do not like having to walk to switches all the time to turn on/off appliances such as fan/light/air conditioner. It results in wasted energy because of unnecessarily keeping appliance on. To solve these problems, we came up with a system with password controlled circuit breakers and wireless control of home appliances using an Android app. It replaces the traditional circuit breaker on/off system with a password controlled system, where nobody can turn on the circuit breaker without the password. Remote control of the home appliances helps the user save electricity. It also enhances the quality and comfort of life. The system also includes a home security mechanism against illegal intrusion using a password controlled door lock system and a mechanism for detecting dangerous gas leakages. The system is built using an Arduino mega microcontroller, a Bluetooth module, a matrix 4x4 keyboard, a methane gas sensor and an Android mobile application. The whole system can be made compact in an integrated system.


  • Bengali Handwriting Recognition and Conversion to Editable Text

    by Sadia Chowdhury, Farhan Rahman Wasee, Mohammad Shafiqul Islam, Hasan U. Zaman

    Handwriting recognition has been a very active field of research in the past few years in different sectors. Analyzing and deducing information from various handwritings can help to tackle many ongoing issues. Though extensive work has been done for English handwritings, any progress can hardly be seen in other languages like Bengali. Hence in this paper, a system has been proposed that takes a scanned image of Bengali handwritten text as its input and after processing it gives an editable version of that text. The system consists of many phases which mainly conducts image processing, machine learning by training the neural network and lastly identification of the Bengali characters. Several data and algorithms have been used to produce a thorough and accurate result.