Bruna Nabuco
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bruna Nabuco has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Marius Tarpø
7 shared publications- Rune Brincker
Technical University of Denmark
6 shared publications - Sandro Amador
Technical University of Denmark (DTU)
3 shared publications - Evangelos I. Katsanos
Technical University of Denmark
2 shared publications - Tobias Friis
Technical University of Denmark
2 shared publications Amina Aïssani
Danish Hydrocarbon Research and Technology Centre (DHRTC), DTU, Kgs. Lyngby, Denmark
1 shared publication
Latest Publications
- Open Access
- 30 May 2020
- Published by Wiley in Shock and Vibration
- Vol. 2020, 1-12
Fatigue Stress Estimation of an Offshore Jacket Structure Based on Operational Modal Analysis
Fatigue life assessment currently recommended by offshore standards is associated with a large number of uncertainties mainly related to the environmental loads and the numerical model. Recently, for economic reasons, the need for extending the lifetime of existing offshore structures led to the necessity of developing more accurate and realistic predicting models so that damage detection and maintenance can be optimized. This paper proposes the implementation of Structural Health Monitoring Systems in order to extract modal properties—such as mode shapes, natural frequencies, and damping ratios—throughout Operational Modal Analysis (OMA), which is the engineering field that studies the modal properties of systems under ambient vibrations or normal operating conditions. The identified modal properties of the structural system are the fundamental information to update a finite element model by means of an expansion technique. Then, the virtual sensing technique—modal expansion—is used to estimate the stress in the entire structure. Though existing models depend on the load estimation, the model based on OMA-assisted virtual sensing depends on the measured responses and assumes that the loads act as random vibrations. A case study using data from a real offshore structure is presented based on measurements recorded during normal operation conditions of an offshore tripod jacket. From strains estimated using OMA and virtual sensing, fatigue stresses are predicted and verified by applying the concept of equivalent stress range. Both estimated and measured strains are given as input data to evaluate the equivalent stress range and compared with each other. Based on this study, structural health monitoring estimates the fatigue stresses with high precision. As conclusion, this study describes how the fatigue can be assessed based on a more accurate value of stress and less uncertainties, which may allow extending the fatigue life of offshore platforms.
- 30 May 2020
- Published by Wiley in Shock and Vibration
- Vol. 2020, 1-12
Open AccessFatigue Stress Estimation of an Offshore Jacket Structure Based on Operational Modal Analysis
Fatigue life assessment currently recommended by offshore standards is associated with a large number of uncertainties mainly related to the environmental loads and the numerical model. Recently, for economic reasons, the need for extending the lifetime of existing offshore structures led to the necessity of developing more accurate and realistic predicting models so that damage detection and maintenance can be optimized. This paper proposes the implementation of Structural Health Monitoring Systems in order to extract modal properties—such as mode shapes, natural frequencies, and damping ratios—throughout Operational Modal Analysis (OMA), which is the engineering field that studies the modal properties of systems under ambient vibrations or normal operating conditions. The identified modal properties of the structural system are the fundamental information to update a finite element model by means of an expansion technique. Then, the virtual sensing technique—modal expansion—is used to estimate the stress in the entire structure. Though existing models depend on the load estimation, the model based on OMA-assisted virtual sensing depends on the measured responses and assumes that the loads act as random vibrations. A case study using data from a real offshore structure is presented based on measurements recorded during normal operation conditions of an offshore tripod jacket. From strains estimated using OMA and virtual sensing, fatigue stresses are predicted and verified by applying the concept of equivalent stress range. Both estimated and measured strains are given as input data to evaluate the equivalent stress range and compared with each other. Based on this study, structural health monitoring estimates the fatigue stresses with high precision. As conclusion, this study describes how the fatigue can be assessed based on a more accurate value of stress and less uncertainties, which may allow extending the fatigue life of offshore platforms.
- 17 June 2018
- Published by ASME International
Nonlinear Strain Estimation Based on Linear Parameters
This paper aims to demonstrate how to estimate strains of fixed structures considering cases with nonlinearities based on parameters determined from one linear case. Both simulated and experimental data have been evaluated. A finite element model was used to obtain the simulated responses. Accelerations and strains were measured along the application of random loading to a fixed structural model for the experimental data. Operational Modal Analysis has been considered in the time domain in order to identify the modal properties. Nonlinearities are included as friction is imposed on the models.
- 17 June 2018
- Published by ASME International
Nonlinear Strain Estimation Based on Linear Parameters
This paper aims to demonstrate how to estimate strains of fixed structures considering cases with nonlinearities based on parameters determined from one linear case. Both simulated and experimental data have been evaluated. A finite element model was used to obtain the simulated responses. Accelerations and strains were measured along the application of random loading to a fixed structural model for the experimental data. Operational Modal Analysis has been considered in the time domain in order to identify the modal properties. Nonlinearities are included as friction is imposed on the models.
- 7 June 2018
- Published by Springer Nature
- p. 143-153
Operational Modal Analysis Based Stress Estimation in Friction Systems
- 7 June 2018
- Published by Springer Nature
- p. 143-153
Operational Modal Analysis Based Stress Estimation in Friction Systems
- 25 June 2017
- Published by ASME International
Reliability Analysis of Offshore Structures Using OMA Based Fatigue Stresses
Today, many offshore structures in the North Sea already reached their predicted lifetime. Since it is still required a huge demand of oil, it results in an important need to keep those structures in operation. The great attention concerning the lifetime of offshore platforms has trigged a need for monitoring these structures in order to gain information about their actual state and hence reduce the uncertainty and allow for more optimal decision planning regarding maintenance, repair and future inspection actions. Throughout the lifetime, the performance of the structure can be evaluated by analyzing the deterioration process of the structure. In the offshore environment, one of the most common deterioration mechanisms is the fatigue of structural steel induced by wave loading. The deterioration formulation of a structural system subjected to fatigue is nowadays well known. However, many uncertainties may affect the accuracy of the performance evaluation. It can be mentioned mainly the uncertainties related to the materials, the uncertainty on Miner’s rule and the uncertainty on the SN curve but most importantly is the uncertainty on the stress ranges induced by the wave loading. In this paper, the mainly focus is on the uncertainty observed on the different stresses used to predict the damage. This uncertainty can be reduced by Modal Based Fatigue Monitoring which is a technique based on continuously measuring of the accelerations in few points of the structure with the use of accelerometers known as reliable for long time measurements. An Operational Modal Analysis (OMA) is performed and then a modal filtering of the operating response is considered, so that the modal coordinates of all significant modes are known. Next, the experimental mode shapes are expanded using a Finite Element (FE) model together with the Local Correspondence (LC) principle and the displacements can be estimated in all degrees of freedom of the FE model, allowing the stresses and strains to be obtained from the element equations. It is important to emphasize that even though the accelerations are measured in only a few points of the structure, the stress history can be calculated in any arbitrary point of the structure. The accuracy of the estimated actual stress is analyzed by experimental tests on a scale model where the obtained stresses are compared to strain gauges measurements. After evaluating the fatigue stresses directly from the operational response of the structure, a reliability analysis is performed in order to estimate the reliability of using Modal Based Fatigue Monitoring for long term fatigue studies.
- 25 June 2017
- Published by ASME International
Reliability Analysis of Offshore Structures Using OMA Based Fatigue Stresses
Today, many offshore structures in the North Sea already reached their predicted lifetime. Since it is still required a huge demand of oil, it results in an important need to keep those structures in operation. The great attention concerning the lifetime of offshore platforms has trigged a need for monitoring these structures in order to gain information about their actual state and hence reduce the uncertainty and allow for more optimal decision planning regarding maintenance, repair and future inspection actions. Throughout the lifetime, the performance of the structure can be evaluated by analyzing the deterioration process of the structure. In the offshore environment, one of the most common deterioration mechanisms is the fatigue of structural steel induced by wave loading. The deterioration formulation of a structural system subjected to fatigue is nowadays well known. However, many uncertainties may affect the accuracy of the performance evaluation. It can be mentioned mainly the uncertainties related to the materials, the uncertainty on Miner’s rule and the uncertainty on the SN curve but most importantly is the uncertainty on the stress ranges induced by the wave loading. In this paper, the mainly focus is on the uncertainty observed on the different stresses used to predict the damage. This uncertainty can be reduced by Modal Based Fatigue Monitoring which is a technique based on continuously measuring of the accelerations in few points of the structure with the use of accelerometers known as reliable for long time measurements. An Operational Modal Analysis (OMA) is performed and then a modal filtering of the operating response is considered, so that the modal coordinates of all significant modes are known. Next, the experimental mode shapes are expanded using a Finite Element (FE) model together with the Local Correspondence (LC) principle and the displacements can be estimated in all degrees of freedom of the FE model, allowing the stresses and strains to be obtained from the element equations. It is important to emphasize that even though the accelerations are measured in only a few points of the structure, the stress history can be calculated in any arbitrary point of the structure. The accuracy of the estimated actual stress is analyzed by experimental tests on a scale model where the obtained stresses are compared to strain gauges measurements. After evaluating the fatigue stresses directly from the operational response of the structure, a reliability analysis is performed in order to estimate the reliability of using Modal Based Fatigue Monitoring for long term fatigue studies.
- Open Access
- 1 January 2017
- Published by Elsevier in Procedia Engineering
- Vol. 199, 2262-2267
Operational modal analysis based prediction of actual stress in an offshore structural model
- 1 January 2017
- Published by Elsevier in Procedia Engineering
- Vol. 199, 2262-2267
Open AccessOperational modal analysis based prediction of actual stress in an offshore structural model