Niels Moller Israelsen

Leading edge erosion of wind turbine blades is one of the most critical issues in wind energy production, resulting in lower efficiency, as well as increased maintenance costs and downtime. Erosion is initiated by impacts from rain droplets and other atmospheric particles, so to protect the blades, special protective coatings are applied to increase their lifetime without adding significantly to the weight or friction of the blade. These coatings should ideally absorb and distribute the force away from the point of impact; however, microscopic defects, such as bubbles, reduce the mechanical performance of the coating, leading to cracks and eventually erosion. In this work, mid‐infrared (MIR) Optical Coherence Tomography (OCT) is investigated for non‐destructive, contactless inspection of coated glass‐fiber composite samples to identify subsurface coating defects. The samples were tested using rubber projectiles to simulate rain droplet and particle impacts. The samples were subsequently imaged using OCT, optical microscopy, and X‐ray tomography. OCT scanning revealed both bubbles and cracks below the surface, which would not have been detected using ultrasonic or similar non‐destructive methods. In this way, OCT can complement the existing quality control in turbine blade manufacturing, help improve the blade lifetime, and reduce the environmental impact from erosion.

In industrial paper production, online monitoring of a range of quality parameters is essential for ensuring that the performance and appearance of the final product is suitable for a given application. In this article, two optical sensing techniques are investigated for non-destructive, non-contact characterization of paper thickness, surface roughness, and production defects. The first technique is optical coherence tomography based on a mid-infrared supercontinuum laser, which can cover thicknesses from ~20–90 μm and provide information about the surface finish. Detection of subsurface voids, cuts, and oil contamination was also demonstrated. The second technique is terahertz time domain spectroscopy, which is used to measure paper thicknesses of up to 443 μm. A proof-of-concept thickness measurement in freely suspended paper was also demonstrated. These demonstrations highlight the added functionality and potential of tomographic optical sensing methods towards industrial non-contact quality monitoring.

We report on mid-infrared optical coherence tomography (OCT) at 4 µm based on collinear sum-frequency upconversion and promote the A-scan scan rate to 3 kHz. We demonstrate the increased imaging speed for two spectral realizations, one providing an axial resolution of 8.6 µm, and one providing a record axial resolution of 5.8 µm. Image performance is evaluated by sub-surface micro-mapping of a plastic glove and real-time monitoring of C O 2 in parallel with OCT imaging.

Near- and mid-infrared optical coherence tomography (OCT) is evaluated as a non-destructive and non-contact reflection imaging modality for inspection of industrial and marine coatings. Near-infrared OCT was used to obtain high-resolution images (~6/2 µm lateral/axial) of hidden subsurface cracks and defects in a resin base coating, which had been exposed to high pressure and high temperature to study coating degradation in hostile environments. Mid-infrared OCT was employed for high-resolution (~15/8.5 µm lateral/axial) subsurface inspection of highly scattering marine coatings, demonstrating monitoring of wet film thickness and particle dispersion during curing of a 210 µm layer of antifouling coating, and detection of substrate corrosion through 369 µm of high-gloss alkyd enamel. Combining high-resolution and fast, non-invasive scanning, OCT is therefore considered a promising tool for studying coating performance and for industrial inspection.

Bedside diagnosis of skin cancer remains a challenging task. The real‐time noninvasive technology of optical coherence tomography (OCT) masters a high diagnostic accuracy in basal cell carcinoma (BCC) but a lower specificity in recognizing imitators and other carcinomas. We investigate the delicate signal of papillary dermis using an in‐house developed ultrahigh resolution OCT (UHR‐OCT) system with shadow compensation and a commercial multi‐focus high resolution OCT (HR‐OCT) system for clinical BCC imaging. We find that the HR‐OCT system struggled to resolve the dark band signal of papillary dermis where the UHR‐OCT located this in all cases and detected changes in signal width. UHR‐OCT is able to monitor extension and position of papillary dermis suggesting a novel feature for delineating superficial BCCs in pursuit of a fast accurate diagnosis. Comprehensive studies involving more patients are imperative in order to corroborate results.

We present the first demonstration of shot-noise limited supercontinuum-based spectral domain optical coherence tomography (SD-OCT) with an axial resolution of 5.9 μm at a center wavelength of 1370 nm. Current supercontinuum-based SD-OCT systems cannot be operated in the shot-noise limited detection regime because of severe pulse-to-pulse relative intensity noise of the supercontinuum source. To overcome this disadvantage, we have developed a low-noise supercontinuum source based on an all-normal dispersion (ANDi) fiber, pumped by a femtosecond laser. The noise performance of our 90 MHz ANDi fiber-based supercontinuum source is compared to that of two commercial sources operating at 80 and 320 MHz repetition rate. We show that the low-noise of the ANDi fiber-based supercontinuum source improves the OCT images significantly in terms of both higher contrast, better sensitivity, and improved penetration. From SD-OCT imaging of skin, retina, and multilayer stacks we conclude that supercontinuum-based SD-OCT can enter the domain of shot-noise limited detection.

Optical emitters of quantum radiation in the solid state are important building blocks for emerging technologies making use of the laws of quantum mechanics. The efficiency of photon extraction from the host material is low for many solid-state systems due to their relatively high index of refraction. In this article we experimentally study the emission spectrum of an ensemble of nitrogen-vacancy defects implanted around 8 nm below the planar diamond surface and in the vicinity of a planar silver mirror. Scanning the distance between diamond and the mirror, we observe an enhancement of the spectral emission power by up to a factor of 3. We construct a model based on classical dipoles and elucidate the observations as being caused by interference in the far field of the emitters.

The coupling between single photon emitters and integrated photonic circuits is an emerging topic relevant for quantum information science and other nanophotonic applications. We investigate the coupling between a hybrid system of colloidal quantum dots and propagating modes of a silicon nitride waveguide system. We furthermore explore the local density of optical states of the system by using a scanning probe technique and find that the quantum dots couple significantly to the photonic circuit. Our results indicate that a scalable slot-waveguide might serve as a promising platform in future developments of integrated quantum circuitry.

Optical coherence tomography (OCT) is a well-established bedside imaging modality that allows analysis of skin structures in a non-invasive way. Automated OCT analysis of skin layers is of great relevance to study dermatological diseases. In this paper, an approach to detect the epidermal layer along with the follicular structures in healthy human OCT images is presented. To the best of the authors' knowledge, the approach presented in this paper is the only epidermis detection algorithm that segments the pilosebaceous unit, which is of importance in the progression of several skin disorders such as folliculitis, acne, lupus erythematosus and basal cell carcinoma. The proposed approach is composed of two main stages. The first stage is a Convolutional Neural Network based on U-Net architecture. The second stage is a robust post-processing composed by a Savitzky-Golay filter and Fourier Domain Filtering to fully define the borders belonging to the hair follicles. After validation, an average Dice of 0.83±0.06 and a thickness error of 10.25 μm is obtained on 270 human skin OCT images. Based on these results, the proposed method outperforms other state-of-the-art methods for epidermis segmentation. It demonstrates that the proposed image segmentation method successfully detects the epidermal region in a fully automatic way in addition to defining the follicular skin structures as main novelty.

Optical emitters of quantum radiation in the solid state are important building blocks for emerging technologies making use of the laws of quantum mechanics. The efficiency of photon extraction from the host material is low for many solid-state systems due to their relatively high index of refraction. In this article we experimentally study the emission spectrum of an ensemble of nitrogen-vacancy defects implanted around 8nm below the planar diamond surface and in the vicinity of a planar silver mirror. Scanning the distance between diamond and the mirror, we observe an enhancement of the spectral emission power by up to a factor of 3. We construct a model based on classical dipoles and elucidate the observations as being caused by interference in the far field of the emitters.