Zexi Lu
Research Subjects
Research Interests
Zexi Lu has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Xiulin Ruan
School of Mechanical Engineering, Purdue University, West Lafayette, USA
6 shared publications - Dongsheng Li
Pacific Northwest National Laboratory
4 shared publications - Yan Wang
University of Nevada, Reno
4 shared publications - Anne M. Chaka
Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)
3 shared publications - Peter V. Sushko
Pacific Northwest National Laboratory
2 shared publications Ajit K. Roy
Air Force Research Laboratory 2 Materials and Manufacturing Directorate Wright Patterson Air Force Base, Dayton, Ohio 45433, USA
1 shared publication
Latest Publications
- 1 December 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (24) , 10637-10650
Phase Transformations in TiO 2 Nanostructures
- 1 December 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (24) , 10637-10650
Phase Transformations in TiO 2 Nanostructures
- 11 November 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (47) , 32386-32400
Defect Self-Elimination in Nanocube Superlattices Through the Interplay of Brownian, van der Waals, and Ligand-Based Forces and Torques
Understanding defect healing is necessary to control the electronic and optoelectronic performance of devices based on nanoparticle (NP) superlattices. However, a key challenge remains to understand how NP interactions and the resulting dynamics are coupled to defect self-elimination during assembly processes. Additional degrees of freedom that account for the anisotropic nature of NPs associated with rotational dynamics and torques further complicate the challenge. Here, we investigate nanocube (NC) superlattices by employing liquid-phase transmission electron microscopy, continuum theory, and molecular dynamics simulations. Our detailed analyses reveal that interparticle forces and torques due to ligand interactions dominate those from Brownian motions and van der Waals interactions. More importantly, NC translations and rotations induced by unbalanced forces and torques are transmitted to neighboring NCs, prompting "chain interactions" in a two-dimensional (2D) network and expediting self-elimination. The mechanistic understanding will further enable the design and fabrication of defect-free superlattices as well as those with tailored defects via assembly of anisotropic particles.
- 11 November 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (47) , 32386-32400
Defect Self-Elimination in Nanocube Superlattices Through the Interplay of Brownian, van der Waals, and Ligand-Based Forces and Torques
Understanding defect healing is necessary to control the electronic and optoelectronic performance of devices based on nanoparticle (NP) superlattices. However, a key challenge remains to understand how NP interactions and the resulting dynamics are coupled to defect self-elimination during assembly processes. Additional degrees of freedom that account for the anisotropic nature of NPs associated with rotational dynamics and torques further complicate the challenge. Here, we investigate nanocube (NC) superlattices by employing liquid-phase transmission electron microscopy, continuum theory, and molecular dynamics simulations. Our detailed analyses reveal that interparticle forces and torques due to ligand interactions dominate those from Brownian motions and van der Waals interactions. More importantly, NC translations and rotations induced by unbalanced forces and torques are transmitted to neighboring NCs, prompting "chain interactions" in a two-dimensional (2D) network and expediting self-elimination. The mechanistic understanding will further enable the design and fabrication of defect-free superlattices as well as those with tailored defects via assembly of anisotropic particles.
- 7 February 2023
- Published by Elsevier in Surfaces and Interfaces
- Vol. 37
Modes of strain accommodation in Cu-Nb multilayered thin film on indentation and cyclic shear
- 7 February 2023
- Published by Elsevier in Surfaces and Interfaces
- Vol. 37
Modes of strain accommodation in Cu-Nb multilayered thin film on indentation and cyclic shear
- 8 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (28) , 32590-32597
Optimization of Thermal Conductance at Interfaces Using Machine Learning Algorithms
Optimization of thermal transport across the interface of two different materials is critical to micro-/nanoscale electronic, photonic, and phononic devices. Although several examples of compositional intermixing at the interfaces having a positive effect on interfacial thermal conductance (ITC) have been reported, an optimum arrangement has not yet been determined because of the large number of potential atomic configurations and the significant computational cost of evaluation. On the other hand, computation-driven materials design efforts are rising in popularity and importance. Yet, the scalability and transferability of machine learning models remain as challenges in creating a complete pipeline for the simulation and analysis of large molecular systems. In this work we present a scalable Bayesian optimization framework, which leverages dynamic spawning of jobs through the Message Passing Interface (MPI) to run multiple parallel molecular dynamics simulations within a parent MPI job to optimize heat transfer at the silicon and aluminum (Si/Al) interface. We found a maximum of 50% increase in the ITC when introducing a two-layer intermixed region that consists of a higher percentage of Si. Because of the random nature of the intermixing, the magnitude of increase in the ITC varies. We observed that both homogeneity/heterogeneity of the intermixing and the intrinsic stochastic nature of molecular simulations account for the variance in ITC.
- 8 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (28) , 32590-32597
Optimization of Thermal Conductance at Interfaces Using Machine Learning Algorithms
Optimization of thermal transport across the interface of two different materials is critical to micro-/nanoscale electronic, photonic, and phononic devices. Although several examples of compositional intermixing at the interfaces having a positive effect on interfacial thermal conductance (ITC) have been reported, an optimum arrangement has not yet been determined because of the large number of potential atomic configurations and the significant computational cost of evaluation. On the other hand, computation-driven materials design efforts are rising in popularity and importance. Yet, the scalability and transferability of machine learning models remain as challenges in creating a complete pipeline for the simulation and analysis of large molecular systems. In this work we present a scalable Bayesian optimization framework, which leverages dynamic spawning of jobs through the Message Passing Interface (MPI) to run multiple parallel molecular dynamics simulations within a parent MPI job to optimize heat transfer at the silicon and aluminum (Si/Al) interface. We found a maximum of 50% increase in the ITC when introducing a two-layer intermixed region that consists of a higher percentage of Si. Because of the random nature of the intermixing, the magnitude of increase in the ITC varies. We observed that both homogeneity/heterogeneity of the intermixing and the intrinsic stochastic nature of molecular simulations account for the variance in ITC.
- 26 August 2021
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 5 (8) , 086002
Effect of interfacial structures on phonon transport across atomically precise Si/Al heterojunctions
Phonons are important carriers of energy and information in many cryogenic devices used for quantum information science and in fundamental physics experiments such as dark matter detectors. In these systems phonon behaviors can be dominated by interfaces and their atomic structures; hence, there is increasing demand for a more detailed understanding of interfacial phonon transport in relevant material systems. Previous studies have focused on understanding thermal transport over the entire phonon spectrum at and above room temperature. At ultralow temperatures, however, knowledge is missing regarding athermal phonon behavior due to the challenge in modeling the extreme conditions in microscale, heterogeneous cryogenic systems, as well as extracting single-phonon information from a large ensemble. In this paper, we delineate the effects of interfacial atomic structures on phonon transport using a combination of classical molecular dynamics (MD) and phonon wave-packet simulations, to illustrate the consistency and differences between the ensemble- and single-phonon dynamics. We consider three single-crystal Si surface reconstructions— and —and model both experimentally observed interfaces and hypothesized /Al and interfaces. The overall interfacial thermal conductance calculated from non-equilibrium MD shows that for the system, the presence of Al twin boundaries can hinder phonon transport and reduce thermal conductance by 2–12% relative to single-crystal Al; whereas the Si and reconstructions can enhance it by 6–19%. Normal mode decomposition reveals that both the increase and decrease in conductance are related to inelastic phonon scattering. Single-phonon wave-packet simulations predict phonon transport properties consistent with non-equilibrium MD, while further suggesting that phonon polarization conversion is significant even when elastic transmission dominates, and that the interfacial structures have anisotropic impacts on atomic vibrations along different lattice directions. Our findings suggest avenues for achieving selective phonon transport via controlling interfacial structures of materials using atomically precise fabrication techniques, and that the phonon wave-packet formalism is a potentially powerful method for developing a detailed understanding of non-equilibrium phenomena in the low-temperature limit.- 26 August 2021
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 5 (8) , 086002
Effect of interfacial structures on phonon transport across atomically precise Si/Al heterojunctions
Phonons are important carriers of energy and information in many cryogenic devices used for quantum information science and in fundamental physics experiments such as dark matter detectors. In these systems phonon behaviors can be dominated by interfaces and their atomic structures; hence, there is increasing demand for a more detailed understanding of interfacial phonon transport in relevant material systems. Previous studies have focused on understanding thermal transport over the entire phonon spectrum at and above room temperature. At ultralow temperatures, however, knowledge is missing regarding athermal phonon behavior due to the challenge in modeling the extreme conditions in microscale, heterogeneous cryogenic systems, as well as extracting single-phonon information from a large ensemble. In this paper, we delineate the effects of interfacial atomic structures on phonon transport using a combination of classical molecular dynamics (MD) and phonon wave-packet simulations, to illustrate the consistency and differences between the ensemble- and single-phonon dynamics. We consider three single-crystal Si surface reconstructions— and —and model both experimentally observed interfaces and hypothesized /Al and interfaces. The overall interfacial thermal conductance calculated from non-equilibrium MD shows that for the system, the presence of Al twin boundaries can hinder phonon transport and reduce thermal conductance by 2–12% relative to single-crystal Al; whereas the Si and reconstructions can enhance it by 6–19%. Normal mode decomposition reveals that both the increase and decrease in conductance are related to inelastic phonon scattering. Single-phonon wave-packet simulations predict phonon transport properties consistent with non-equilibrium MD, while further suggesting that phonon polarization conversion is significant even when elastic transmission dominates, and that the interfacial structures have anisotropic impacts on atomic vibrations along different lattice directions. Our findings suggest avenues for achieving selective phonon transport via controlling interfacial structures of materials using atomically precise fabrication techniques, and that the phonon wave-packet formalism is a potentially powerful method for developing a detailed understanding of non-equilibrium phenomena in the low-temperature limit.- 12 July 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 12 (28) , 6596-6603
Tuning Electronic Properties of 2D Materials Using Metal Adsorbates: Cu at WTe2Edges
Two-dimensional materials exhibit properties promising for novel applications. Topologically protected states at their edges can be harnessed for use in quantum devices. We use ab initio simulations to examine properties of edges in 1T′-WTe2 monolayers, known to exhibit topological order, and their interactions with Cu atoms. Comparison of (010)-oriented edges that have the same composition but different terminations shows that, as the number of Cu atoms increases, their thermodynamically preferred arrangement depends on the details of the edge structure. Cu atoms aggregate into a cluster at the most stable edge; while the cluster is nonmagnetic, it spin-polarizes the W atoms along the edge, which removes the topological protection. At the metastable edge, Cu atoms form a chain incorporated into the WTe2 lattice; the topological state is preserved in spite of the dramatic edge restructuring. This suggests that exploiting interactions of metal species with metastable edge terminations can provide a path toward noninvasive interfaces.
- 12 July 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 12 (28) , 6596-6603
Tuning Electronic Properties of 2D Materials Using Metal Adsorbates: Cu at WTe2Edges
Two-dimensional materials exhibit properties promising for novel applications. Topologically protected states at their edges can be harnessed for use in quantum devices. We use ab initio simulations to examine properties of edges in 1T′-WTe2 monolayers, known to exhibit topological order, and their interactions with Cu atoms. Comparison of (010)-oriented edges that have the same composition but different terminations shows that, as the number of Cu atoms increases, their thermodynamically preferred arrangement depends on the details of the edge structure. Cu atoms aggregate into a cluster at the most stable edge; while the cluster is nonmagnetic, it spin-polarizes the W atoms along the edge, which removes the topological protection. At the metastable edge, Cu atoms form a chain incorporated into the WTe2 lattice; the topological state is preserved in spite of the dramatic edge restructuring. This suggests that exploiting interactions of metal species with metastable edge terminations can provide a path toward noninvasive interfaces.
- 17 November 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (45) , 23183-23190
Phase transformations among TiO 2 polymorphs
Polymorphs widely exist in nature and synthetic systems and are well known to determine material properties. Understanding phase transformation mechanisms among polymorphs enables the design of structures and tuning of phases to tailor material properties. However, current understanding is limited due to the lack of direct observations of the structural evolution at the atomic scale. Here, integrating (semi) in situ transmission electron microscopy and density functional theory, we report atomic structural evolutions of phase transformation from anatase (A) to rutile (R), brookite (B), R-phase, and TiO. Besides the consistent paths with previous reports, we discover several unreported paths, including a [001] direction and (020) plane of anatase to [100]R and (01)R of rutile, respectively, ([001]A||[100]R, (020)A||(01)R) and [001]A||[001]B, (020)A||(220)B. Density functional theory analysis elucidates atomic structural evolution during the processes and over 16% of Ti–O bonds break and reform during the processes with energy barriers of ∼0.7–1.0 eV per TiO2 formula unit. Under electron-beam irradiation, anatase particles transform into TiO2–R phase or TiO at high or room temperature, respectively. We also reveal the anisotropic nature of the electron-beam effect, which is seldom discussed: dependence of crystallographic orientation with respect to electron-beam irradiation direction. Understanding the atomic structural evolution sheds light on interpreting and controlling TiO2 polymorphs and intermediate structures for various applications. The revealed electron-beam effects in our work provide guidance for in situ transmission electron microscopy studies.
- 17 November 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (45) , 23183-23190
Phase transformations among TiO 2 polymorphs
Polymorphs widely exist in nature and synthetic systems and are well known to determine material properties. Understanding phase transformation mechanisms among polymorphs enables the design of structures and tuning of phases to tailor material properties. However, current understanding is limited due to the lack of direct observations of the structural evolution at the atomic scale. Here, integrating (semi) in situ transmission electron microscopy and density functional theory, we report atomic structural evolutions of phase transformation from anatase (A) to rutile (R), brookite (B), R-phase, and TiO. Besides the consistent paths with previous reports, we discover several unreported paths, including a [001] direction and (020) plane of anatase to [100]R and (01)R of rutile, respectively, ([001]A||[100]R, (020)A||(01)R) and [001]A||[001]B, (020)A||(220)B. Density functional theory analysis elucidates atomic structural evolution during the processes and over 16% of Ti–O bonds break and reform during the processes with energy barriers of ∼0.7–1.0 eV per TiO2 formula unit. Under electron-beam irradiation, anatase particles transform into TiO2–R phase or TiO at high or room temperature, respectively. We also reveal the anisotropic nature of the electron-beam effect, which is seldom discussed: dependence of crystallographic orientation with respect to electron-beam irradiation direction. Understanding the atomic structural evolution sheds light on interpreting and controlling TiO2 polymorphs and intermediate structures for various applications. The revealed electron-beam effects in our work provide guidance for in situ transmission electron microscopy studies.
- 31 August 2020
- Published by American Physical Society (APS) in Physical Review B
- Vol. 102 (7) , 075449
Thermal conductance enhanced via inelastic phonon transport by atomic vacancies at Cu/Si interfaces
Understanding and controlling heat transfer across interfaces has become an important issue for the performance of micro- and nanoscale electronics, as well as achieving a high figure of merit for thermoelectrics. Intrinsic and extrinsic defects can have a significant impact on thermal transport in bulk materials and across interfaces, but the mechanism is not well understood. In this work, nonequilibrium molecular dynamics simulations are used to determine the impact of interfacial atomic vacancies on thermal transport across a Cu/Si junction. In contrast to the reduction in thermal transport typically seen with bulk defects, we find that by introducing atomic vacancies at a concentration of 6.3% near the interface in either or both materials, the interfacial thermal conductance can be increased by up to 76%. By controlling the initial positions of the vacancies and keeping track of their movements and population, we find that interfacial thermal transport is dependent on temperature, vacancy concentration, and distribution, and a positive correlation between the conductance and point defect activities (extent of vacancy migration, rate of Frenkel defect creation and annihilation) is observed. Further calculations based on the phonon density of states and normal mode decomposition reveal that the increase in interfacial thermal conductance originates primarily from high-frequency phonons, supported by enhanced inelastic phonon transport which contributes to more than 60% of the increase. Our findings suggest a practical way to manipulate inelastic phonon conversion through the presence of defects, which provides an alternative perspective on improving thermal transport between materials with a large lattice mismatch.
- 31 August 2020
- Published by American Physical Society (APS) in Physical Review B
- Vol. 102 (7) , 075449
Thermal conductance enhanced via inelastic phonon transport by atomic vacancies at Cu/Si interfaces
Understanding and controlling heat transfer across interfaces has become an important issue for the performance of micro- and nanoscale electronics, as well as achieving a high figure of merit for thermoelectrics. Intrinsic and extrinsic defects can have a significant impact on thermal transport in bulk materials and across interfaces, but the mechanism is not well understood. In this work, nonequilibrium molecular dynamics simulations are used to determine the impact of interfacial atomic vacancies on thermal transport across a Cu/Si junction. In contrast to the reduction in thermal transport typically seen with bulk defects, we find that by introducing atomic vacancies at a concentration of 6.3% near the interface in either or both materials, the interfacial thermal conductance can be increased by up to 76%. By controlling the initial positions of the vacancies and keeping track of their movements and population, we find that interfacial thermal transport is dependent on temperature, vacancy concentration, and distribution, and a positive correlation between the conductance and point defect activities (extent of vacancy migration, rate of Frenkel defect creation and annihilation) is observed. Further calculations based on the phonon density of states and normal mode decomposition reveal that the increase in interfacial thermal conductance originates primarily from high-frequency phonons, supported by enhanced inelastic phonon transport which contributes to more than 60% of the increase. Our findings suggest a practical way to manipulate inelastic phonon conversion through the presence of defects, which provides an alternative perspective on improving thermal transport between materials with a large lattice mismatch.
- 13 August 2019
- Published by Wiley in Advanced Materials Interfaces
- Vol. 6 (17)
Edge Dislocations Induce Improved Photocatalytic Efficiency of Colored TiO2
Titanium oxide is the most widely used material for photocatalytic applications due to its low cost and environmental friendliness. One of the grand challenges to improve its energy conversion efficiency is to utilize more visible light while inhibiting the recombination of photogenerated electrons and holes. A one‐step hydrosolvothermal method is used to obtain colored ultrafine nanowires of rutile and nanoparticles of anatase with edge dislocations, which induce broadened visible solar absorption (400–900 nm) and improve photocatalytic efficiency up to 1.8 times that of rutile or anatase without defects. Enhanced photocatalytic activity of these structures is demonstrated by photodegrading methylene blue measurements under simulated solar light irradiation. Results show the existence of Ti3+, induced by edge dislocations, and subsequent electronic band structure–property relationships. This work highlights a strategy for generating sufficient desired defects in TiO2 nanostructures, leading to broadened visible solar absorption and improved photocatalytic efficiency under visible light irradiation.
- 13 August 2019
- Published by Wiley in Advanced Materials Interfaces
- Vol. 6 (17)
Edge Dislocations Induce Improved Photocatalytic Efficiency of Colored TiO2
Titanium oxide is the most widely used material for photocatalytic applications due to its low cost and environmental friendliness. One of the grand challenges to improve its energy conversion efficiency is to utilize more visible light while inhibiting the recombination of photogenerated electrons and holes. A one‐step hydrosolvothermal method is used to obtain colored ultrafine nanowires of rutile and nanoparticles of anatase with edge dislocations, which induce broadened visible solar absorption (400–900 nm) and improve photocatalytic efficiency up to 1.8 times that of rutile or anatase without defects. Enhanced photocatalytic activity of these structures is demonstrated by photodegrading methylene blue measurements under simulated solar light irradiation. Results show the existence of Ti3+, induced by edge dislocations, and subsequent electronic band structure–property relationships. This work highlights a strategy for generating sufficient desired defects in TiO2 nanostructures, leading to broadened visible solar absorption and improved photocatalytic efficiency under visible light irradiation.
- 28 February 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (8) , 085107
Role of phonon coupling and non-equilibrium near the interface to interfacial thermal resistance: The multi-temperature model and thermal circuit
Interfacial thermal transport between two semi-infinite leads has been widely assumed to be independent from bulk transport in the two leads. However, here we show that due to the mismatch of phonon modal interfacial conductance and modal thermal conductivity, thermal interfacial transport is affected by the bulk thermal transport, and phonons near the interface can be driven into strong non-equilibrium, causing an additional resistance that is lumped into the interfacial resistance. This is captured using a multi-temperature model (MTM) that we introduce. Using thermal properties predicted from first-principles calculations and interfacial transmission coefficients predicted from the acoustic mismatch model, we present a case study of thermal transport across the Si-Ge interfaces using our MTM. The results show that phonon branches are in non-equilibrium near the interface due to energy re-distribution caused by different thermal properties of the materials and the corresponding transmission coefficients, and the overall interfacial thermal conductance is 5.4% smaller than the conventional prediction, due to the phonon non-equilibrium resistance. We present a thermal circuit to include this new resistance due to phonon-phonon coupling and non-equilibrium near the interfaces. The thermal circuit also shows that increasing the phonon-phonon coupling factor can reduce this resistance. Our MTM is a general and simple analytical approach expected to be useful for investigating the coupling between thermal transport across interfaces and in the bulk leads.- 28 February 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (8) , 085107
Role of phonon coupling and non-equilibrium near the interface to interfacial thermal resistance: The multi-temperature model and thermal circuit
Interfacial thermal transport between two semi-infinite leads has been widely assumed to be independent from bulk transport in the two leads. However, here we show that due to the mismatch of phonon modal interfacial conductance and modal thermal conductivity, thermal interfacial transport is affected by the bulk thermal transport, and phonons near the interface can be driven into strong non-equilibrium, causing an additional resistance that is lumped into the interfacial resistance. This is captured using a multi-temperature model (MTM) that we introduce. Using thermal properties predicted from first-principles calculations and interfacial transmission coefficients predicted from the acoustic mismatch model, we present a case study of thermal transport across the Si-Ge interfaces using our MTM. The results show that phonon branches are in non-equilibrium near the interface due to energy re-distribution caused by different thermal properties of the materials and the corresponding transmission coefficients, and the overall interfacial thermal conductance is 5.4% smaller than the conventional prediction, due to the phonon non-equilibrium resistance. We present a thermal circuit to include this new resistance due to phonon-phonon coupling and non-equilibrium near the interfaces. The thermal circuit also shows that increasing the phonon-phonon coupling factor can reduce this resistance. Our MTM is a general and simple analytical approach expected to be useful for investigating the coupling between thermal transport across interfaces and in the bulk leads.