Joy Prabu Henry
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Joy Prabu Henry has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Ebenezer Thaninayagam
Department of Physics, St. Joseph’s College (Autonomous), Affiliated to Bharathidasan University 1 , Tiruchirappalli 620002, Tamil Nadu
2 shared publications - Felix Sahayaraj Arockiasamy
Department of Mechanical Engineering, KIT-Kalaignarkarunanidhi Institute of Technology, Coimbatore 641402, Tamil Nadu, India
2 shared publications A. Elizabeth
Centre for Nanoscience and Applied Thermodynamics, Department of Physics, St. Joseph’s College (Autonomous), affiliated to Bharathidasan University, Tiruchirappalli, India
1 shared publicationA. Felix Sahayaraj
Department of Mechanical Engineering, KIT–Kalaignar Karunanidhi Institute of Technology, Coimbatore, India
1 shared publicationA. Joseph Sagaya Kennedy
Department of Physics, SRM TRP Engineering College, Affiliated to Anna University, Irungalur, Tiruchirappalli, India
1 shared publicationDhivya Christo Anitha
Centre for Nano Science and Applied Thermodynamics Department of Physics St. Joseph's College Trichy 620002 Tamilnadu India
1 shared publication
Latest Publications
- Open Access
- 8 January 2025
- Published by AIP Publishing in Nanotechnology and Precision Engineering
- Vol. 8 (3)
An investigation of silver-nanoparticle-modified TiO2 substrates for photocatalytic oxidation in wastewater treatment
This research aims to explore the decoration of TiO2 substrates with silver nanoparticles as a means of enhancing the photocatalytic oxidation of organic compounds. The results show that decorated TiO2 substrates exhibit significantly higher photocatalytic activity in sunlight than undecorated substrates. Morphological analysis is performed, followed by optical and structural characterizations. Scanning electron microscopy analysis of the TiO2 reveals many nanotubular structures with particle sizes of ∼134.4, 148.8, and 132.7 nm at random locations. TiO2 is also found to have an absorbance range of 397.6 nm, from which it is known that the photocatalyst reacts in the presence of an ultraviolet source. From the Miller indices of the x-ray diffraction peaks, the preferred crystal orientation is found to be associated with a face-centered cubic structure with a crystallite size of 3.76 nm. Using these promising results, photocatalytic analysis is performed, revealing good degradation characteristics. This investigation reveals that TiO2 substrates coated with Ag nanoparticles possess significant potential for application in the photocatalytic oxidation of methylene blue dye, which is a crucial step toward establishing a cleaner environment.
- 8 January 2025
- Published by AIP Publishing in Nanotechnology and Precision Engineering
- Vol. 8 (3)
Open AccessAn investigation of silver-nanoparticle-modified TiO2 substrates for photocatalytic oxidation in wastewater treatment
This research aims to explore the decoration of TiO2 substrates with silver nanoparticles as a means of enhancing the photocatalytic oxidation of organic compounds. The results show that decorated TiO2 substrates exhibit significantly higher photocatalytic activity in sunlight than undecorated substrates. Morphological analysis is performed, followed by optical and structural characterizations. Scanning electron microscopy analysis of the TiO2 reveals many nanotubular structures with particle sizes of ∼134.4, 148.8, and 132.7 nm at random locations. TiO2 is also found to have an absorbance range of 397.6 nm, from which it is known that the photocatalyst reacts in the presence of an ultraviolet source. From the Miller indices of the x-ray diffraction peaks, the preferred crystal orientation is found to be associated with a face-centered cubic structure with a crystallite size of 3.76 nm. Using these promising results, photocatalytic analysis is performed, revealing good degradation characteristics. This investigation reveals that TiO2 substrates coated with Ag nanoparticles possess significant potential for application in the photocatalytic oxidation of methylene blue dye, which is a crucial step toward establishing a cleaner environment.
- Open Access
- 1 June 2018
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 13 (6) , 845-848
Facile sonication‐assisted synthesis and characterisations of silica decorated graphene nanocomposites
This work demonstrates the fabrication of a composite nanomaterial consisting of spherical silica nanoparticles decorated onto the graphene sheets which has been prepared by the sonication‐assisted method. Graphene/silica nanocomposites were fabricated by the hydrolysis of tetraethyl orthosilicate in the presence of graphene oxide which has been obtained by modified Hummer's method. The obtained nanostructures were characterised by the X‐ray diffraction (XRD), Raman spectroscopy, Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD analysis depicts the coexistence of silica and graphene in the composite material. The morphology of synthesised silica–graphene nanocomposites was characterised by SEM and TEM. All images have been observed in the presence of SiO 2 nanoparticles of similar sizes which were grafted on the surface of graphene effectively. More significantly, the BET analysis revealed that the silica decorated graphene nanocomposites exhibit enhanced surface area than bare silica and graphene.
- 1 June 2018
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 13 (6) , 845-848
Open AccessFacile sonication‐assisted synthesis and characterisations of silica decorated graphene nanocomposites
This work demonstrates the fabrication of a composite nanomaterial consisting of spherical silica nanoparticles decorated onto the graphene sheets which has been prepared by the sonication‐assisted method. Graphene/silica nanocomposites were fabricated by the hydrolysis of tetraethyl orthosilicate in the presence of graphene oxide which has been obtained by modified Hummer's method. The obtained nanostructures were characterised by the X‐ray diffraction (XRD), Raman spectroscopy, Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD analysis depicts the coexistence of silica and graphene in the composite material. The morphology of synthesised silica–graphene nanocomposites was characterised by SEM and TEM. All images have been observed in the presence of SiO 2 nanoparticles of similar sizes which were grafted on the surface of graphene effectively. More significantly, the BET analysis revealed that the silica decorated graphene nanocomposites exhibit enhanced surface area than bare silica and graphene.
- 10 October 2017
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 37 (3) , 1176-1182
Ultrasonication‐assisted transesterification for biodiesel production by using heterogeneous ZnO nanocatalyst
Biodiesel is considered as an alternative fuel which can replace the traditional fuels easily with its less hazardous effects and economical pricing. This study compares an ultrasonic‐assisted catalytic transesterification using ZnO nanocatalyst for waste cooking oil (WCO) with the conventional stirring method. The structural and morphological characterizations of prepared catalysts were done by XRD and FESEM with EDX methods. The effect of reaction parameters such as oil to methanol ratio, catalyst amount and reaction time was investigated to optimize the transesterification conditions. GC/MS and FTIR analysis have been carried out to identify and confirm the presence of fatty acid methyl esters (FAME) under optimum conditions. The FAME conversion yield up to 96% under ultrasonication method was calculated. Two important fuel properties like density and viscosity were analyzed and compared with the standard biodiesel. These studies provided the clear evidence that WCO can be employed as a substantial source of biodiesel as fuel in diesel engines. © 2017 American Institute of Chemical Engineers Environ Prog, 37: 1176–1182, 2018
- 10 October 2017
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 37 (3) , 1176-1182
Ultrasonication‐assisted transesterification for biodiesel production by using heterogeneous ZnO nanocatalyst
Biodiesel is considered as an alternative fuel which can replace the traditional fuels easily with its less hazardous effects and economical pricing. This study compares an ultrasonic‐assisted catalytic transesterification using ZnO nanocatalyst for waste cooking oil (WCO) with the conventional stirring method. The structural and morphological characterizations of prepared catalysts were done by XRD and FESEM with EDX methods. The effect of reaction parameters such as oil to methanol ratio, catalyst amount and reaction time was investigated to optimize the transesterification conditions. GC/MS and FTIR analysis have been carried out to identify and confirm the presence of fatty acid methyl esters (FAME) under optimum conditions. The FAME conversion yield up to 96% under ultrasonication method was calculated. Two important fuel properties like density and viscosity were analyzed and compared with the standard biodiesel. These studies provided the clear evidence that WCO can be employed as a substantial source of biodiesel as fuel in diesel engines. © 2017 American Institute of Chemical Engineers Environ Prog, 37: 1176–1182, 2018