SXShenglong Xie

Shenglong Xie

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Shenglong Xie has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated on-line recognition and control for adaptive hysteresis compensation in pneumatic muscle actuators

    by Shenglong Xie, Huiru Duan, Yuntang Li, Shiyuan Bian, Shiwu Zhang

    Pneumatic Muscle Actuators (PMAs) present a persistent challenge in high-precision motion control due to their pronounced hysteresis nonlinearity. While conventional Proportional-Integral-Derivative (PID) controllers based on offline-identified hysteresis models are widely used, they fail to capture the time-varying and load-dependent nature of PMA hysteresis, leading to significant modeling and tracking errors. To overcome this limitation, this paper introduces a novel integrated control architecture that, for the first time, tightly couples real-time hysteresis identification with adaptive PID regulation. The proposed method retains the simplicity of the classical Prandtl–Ishlinskii (PI) hysteresis model but employs an online parameter estimator-specifically the Forgetting-Factor Recursive Least Squares (FFRLS) algorithm—to continuously update the model under varying loads and frequencies. Furthermore, three distinct adaptive PID controllers are developed and experimentally compared, whose gains are adjusted online via a Back-Propagation (BP) neural network, a Radial Basis Function (RBF) neural network, or a fuzzy-logic system. Extensive trajectory-tracking tests demonstrate that: the FFRLS-based online identification effectively adapts to load changes and achieves the highest modeling accuracy among the tested online methods; all three adaptive PID variants significantly outperform the conventional PID controller; the BP-based adaptive PID controller delivers the best overall performance-requiring no manual tuning, exhibiting superior robustness against both load and frequency disturbances, and reducing tracking error by more than 40% compared to the classical PID approach. Thus, this work establishes a practical, readily implementable control solution that exploits the synergy between online hysteresis compensation and adaptive PID tuning, offering a robust framework for precision motion control of PMA-driven systems in real-world applications.

  • Hysteresis modeling and compensation control of pneumatic muscle based on the modified AGPI model

    by Shenglong Xie, Wenqi Sun, Yuntang Li, Suan Xu, Jiawei Zang

    To address the issue of nonlinear asymmetric hysteresis in pneumatic muscles, this paper proposes an improved asymmetric generalized Prandtlã Ishlinskii (AGPI) hysteresis model. This model is designed to better characterize asymmetric hysteresis characteristics, thereby improving its accuracy. To this end, the NRBO algorithm is employed to enhance the fitting performance of the hysteresis model, improving both identification accuracy and computational efficiency. Experimental data of pressure-displacement hysteresis curves for both Festo and self-made pneumatic muscles are collected and compared with the parameter identification results of different envelope functions, validating the effectiveness of the proposed approach. Finally, a trajectory tracking control experiment is conducted using sinusoidal and complex wave trajectories, based on a feedforward/feedback control strategy. The results demonstrate that the proposed AGPI model enhances the modeling performance of hysteresis models. It also significantly improves the control accuracy of pneumatic muscles in trajectory tracking.

  • Movement Intention Decoding From Electromyographic Signals Using Deep Residual Networks and Bidirectional Long Short-Term Memory With Hybrid Attention

    by Shenglong Xie, Yu Lv, Shiwu Zhang, Wei Gao, Shiyuan Bian

    The accurate identification of a patient’s movement intention using electromyographic (EMG) signals plays a pivotal role in wrist rehabilitation training. However, existing EMG signal classification methods often fail to adequately capture essential features, including critical channel information, temporal variations, and multi-scale feature representations. To overcome these limitations, this paper proposes a novel multi-branch residual network architecture that combines bidirectional long short-term memory (BiLSTM) with two attention mechanisms, specifically the convolutional block attention module (CBAM) and squeeze-and-excitation (SE), for enhanced EMG signal classification. Experiments on the public NinaPro DB4 dataset show that the proposed multi-branch residual attention network with BiLSTM (MBRAnet-BiLSTM) achieves classification metrics of 93.66% mean accuracy, 92.01% F1-score, and 90.32% recall across six fundamental wrist rehabilitation movements. Notably, the model exhibits significant performance improvements of 8.24% for wrist supination and 6.48% for wrist pronation movements, compared to conventional convolutional neural network (CNN) baselines, demonstrating enhanced capability in classifying complex muscle activation patterns. This work demonstrates that integrating multi-branch attention and residual BiLSTM architectures is highly effective for decoding complex EMG patterns.


  • The precise motion control of electric push rod based on linear active disturbance rejection control

    by Kaikai Hu, Shenglong Xie, Haiming Zhong

    This article presents a precise motion control strategy for electric push rod (EPR) using active disturbance rejection control (ADRC). A complete mathematical model is developed firstly, which integrating the dynamics of the DC motor and transmission system to characterize dynamic behavior of the EPR. A linear ADRC controller is then designed to address the system’s dynamics and external disturbances, with rigorous stability analysis provided to demonstrate its theoretical robustness. Finally, experimental validation is conducted through comparative simulations and physical tests, respectively. The simulation results validate the effectiveness of ADRC. The physical validation is performed on a dedicated test platform under three critical schemes: (1) sine-wave tracking (for dynamic response and multi-frequency disturbance), (2) complex periodic wave tracking (for robustness performance), and (3) step-wave regulation (for transient performance). Comparative results demonstrate that compared with the classical PID control, using ADRC control reduces the RMSE of the three trajectories by 17.91%, 16.39%, and 30.64%, respectively, while reducing the settling time of step response by 30%. The study demonstrates that ADRC-based control significantly enhances the performance of EPR in precision applications while maintaining system stability under varying operational conditions.

  • Open Access

    Predictive Control for an Ankle Rehabilitation Robot Using Differential Evolution Optimization Algorithm-Based Fuzzy NARX Model

    by Shenglong Xie, Haiming Zhong, Yuntang Li, Su'AN Xu, Wenyuan Liu, Shiyuan Bian, Shiwu Zhang

    For patients with stroke, hemiplegia and ankle injuries, ankle rehabilitation robots can provide personalized rehabilitation treatment programs through quantitative evaluation and precise control. In this paper, based on differential evolution (DE) optimization algorithm and fuzzy nonlinear auto regressive with exogenous inputs (NARX) model, an iterative learning model predictive controller is constructed to achieve accurate and robust trajectory tracking control of an ankle rehabilitation robot driven by pneumatic muscle. Firstly, the T-S fuzzy NARX model is applied to characterize the forward and inverse hysteresis process of pneumatic muscle actuator ( PMA ) in this ankle rehabilitation robots and differential evolution optimization (DE) algorithm realize high precision parameters identification. Then, the optimization of objective function is compared with genetic algorithm and particle swarm optimization. Secondly, the iterative learning model predictive control (ILMPC) controller is designed and the trajectory tracking control scheme of an ankle rehabilitation robot is presented based on the ILMPC controller. Finally, the experiments with different trajectories and subjects are carried out to verify the control performance of the proposed control method. The experimental results indicate that the proposed ILMPC controller can converge normally and has good control performance with different operating trajectories and subjects.


  • An improved generalized Prandtl–Ishlinskii model for the hysteresis modeling of pneumatic artificial muscles

    by Shenglong Xie, Haiming Zhong, Yuntang Li, Su’aN Xu

    Due to the merits of high flexibility, large driving force, and light weight, the pneumatic artificial muscle (PAM) has been widely applied in robot. However, the inherent asymmetric hysteresis nonlinear characteristics affect the control performance of PAM seriously. This paper presents an improved generalized Prandtl–Ishlinskii (GPI-M) model for the asymmetric hysteresis characterization of PAM, which adopts the simplified Magic Formula (SMF) as the envelop function instead of hyperbolic tangent function (GPI) or arc tangent function (GPI-A). With regard to the effect of parameters identification, the Levenberg-Marquardt (LM) algorithm, genetic algorithm (GA), particle swarm optimization (PSO) algorithm, and differential evolution (DE) algorithm are studied, which shows the LM algorithm is far superior to the other three intelligent algorithms in terms of computational efficiency and identification accuracy. Furthermore, a crosswise comparative study on three models and two envelop functions investigating modeling accuracy reveals that the newly introduced GPI-M model exhibits better performance than the modified symmetric generalized Prandtl-Ishlinskii (MSGPI) model and the GPI-A model presented previously. Meanwhile, the influence of the operator numbers on the modeling accuracy of three models is discussed, which finds that the GPI-M model possess the best accuracy with the least operator numbers.


  • Research on Fuzzy Iterative Learning Control of Pneumatic Artificial Muscle

    by Huiru Duan, Shenglong Xie, Zijing Liu, Yanjian Wan

  • Open Access

    Research on the process planning and multi-method integration strategy of product conceptual design with cognitive mechanisms

    by Wan Yan-Jian, Wang Jun, Wang Yong-Wei, Du Xin-Fa, Xie Sheng-Long, Chen Zi-Liang

    Innovative product design is essentially an activity involving creative cognitive thinking. Therefore, research on the innovative design process and of methods, computer-aided innovation tools should be conducted based on systematic exploration based on the principles of innovative cognitive thinking. We aim to uncover some general principles that can serve as a systematic thinking framework for product designers, provide a feasible framework and method of innovative thinking for designers, and provide theoretical and methodological support for further development of computer-aided innovation platforms. This paper summarizes the sources and content of studies on the idea generation and design processes behind product innovation. Specifically, we break down the general innovative design process of products, outlining the cognitive mechanisms and propose an integrated application strategy that incorporates multiple methods. And taking “the solution program to the coking of oily sludge pyrolysis equipment” as an example, this paper demonstrated and verified the effectiveness and practicability of the method and strategy proposed. Based on the results on improvements in the equipment, the designers put forward some creative and implementable design schemes. The entire thinking process was relatively smooth and efficient. The example presented in this paper shows that the proposed method can effectively guide/assist/motivate designers to think creatively.