Wantong Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wantong Sun has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
Na Wei
8 shared publicationsQingping Li
5 shared publicationsAn-Qi Liu
Geological Explorations and Development Institute, Chuan Qing Drilling Engineering Company Limited, Chengdu, China
4 shared publicationsAnqi Liu
Gological Explorations and Development Institute, Chuanqing Drilling Engineering Company Limited
4 shared publicationsHanming Xu
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, China
4 shared publicationsJinzhou Zhao
4 shared publications
Latest Publications
- Open Access
- 27 August 2021
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 9
An Experimental Study on the Formation of Natural Gas Hydrate With Thermodynamic Inhibitors
Gas hydrates formed in the conditions of high pressure and low temperature in deep sea and in the process of oil and gas transportation, natural gas hydrate (NGH), will seriously affect the safety of drilling and completion operations and marine equipment and threaten the safety of drilling platform. How to prevent the hydrate formation in the process of oil and gas production and transportation has become an urgent problem for the oil and gas industry. For this reason, in view of the formation of NGH in the process of drilling and producing marine NGH, the phase equilibrium calculation research of NGH formation was carried out, the mathematical model of gas hydrate formation phase equilibrium condition was established, and the experimental research on NGH formation was carried out through adding different thermodynamic inhibitors. The experimental phenomena show that, first, the stirring speed has little effect on the inhibition of hydrate formation. Second, when the pressure is 10 MPa and the volume concentration of inhibitor is 1, 3, 5, and 7%, the supercooling degree of hydrate formation is 1.81, 8.89, 11.09, and 9.39°C, respectively. Third, when the volume concentration of inhibitor is 1, 3, 5, and 7%, the induction time of hydrate formation is 10328, 14231, 19576, and 24900 s, respectively. As the polymer molecules in the inhibitor reduce the activity of water in the system and fill the cavity structure of the hydrate, they reduce the generation conditions of NGH and break the original phase equilibrium conditions when NGH is generated, thus forming NGH at a lower temperature or higher pressure.
- 27 August 2021
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 9
Open AccessAn Experimental Study on the Formation of Natural Gas Hydrate With Thermodynamic Inhibitors
Gas hydrates formed in the conditions of high pressure and low temperature in deep sea and in the process of oil and gas transportation, natural gas hydrate (NGH), will seriously affect the safety of drilling and completion operations and marine equipment and threaten the safety of drilling platform. How to prevent the hydrate formation in the process of oil and gas production and transportation has become an urgent problem for the oil and gas industry. For this reason, in view of the formation of NGH in the process of drilling and producing marine NGH, the phase equilibrium calculation research of NGH formation was carried out, the mathematical model of gas hydrate formation phase equilibrium condition was established, and the experimental research on NGH formation was carried out through adding different thermodynamic inhibitors. The experimental phenomena show that, first, the stirring speed has little effect on the inhibition of hydrate formation. Second, when the pressure is 10 MPa and the volume concentration of inhibitor is 1, 3, 5, and 7%, the supercooling degree of hydrate formation is 1.81, 8.89, 11.09, and 9.39°C, respectively. Third, when the volume concentration of inhibitor is 1, 3, 5, and 7%, the induction time of hydrate formation is 10328, 14231, 19576, and 24900 s, respectively. As the polymer molecules in the inhibitor reduce the activity of water in the system and fill the cavity structure of the hydrate, they reduce the generation conditions of NGH and break the original phase equilibrium conditions when NGH is generated, thus forming NGH at a lower temperature or higher pressure.
- Open Access
- 29 June 2021
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 9
Wellbore Temperature and Pressure Field in Deep-water Drilling and the Applications in Prediction of Hydrate Formation Region
In the process of deep-water drilling, gas hydrate is easily formed in wellbores due to the low temperature and high pressure environment. In this study, a new, systematic, and accurate prediction method of temperature, pressure, and hydrate formation region in wellbores is developed. The mathematical models of wellbore pressure and transient heat transfer are established, the numerical solution method based on fully implicit finite difference method is developed, and the accuracy is verified by comparing with the field measured data. Combined with the hydrate phase equilibrium model, the hydrate formation region in wellbore is predicted, and the sensitivity effects of nine factors on wellbore temperature, pressure, and hydrate formation region are analyzed. Finally, the influence regularities and degree of each parameter are obtained. The increases of circulation time, geothermal gradient, displacement of drilling fluid, and injection temperature will inhibit the formation of hydrate in wellbores, and the influence degree increases in turn; the increases of wellhead backpressure and seawater depth will promote the formation of hydrate in wellbores, and the influence degree increases in turn. The changes of drilling fluid density, well depth, and hole deviation angle have little effect on the formation of hydrate in wellbores.
- 29 June 2021
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 9
Open AccessWellbore Temperature and Pressure Field in Deep-water Drilling and the Applications in Prediction of Hydrate Formation Region
In the process of deep-water drilling, gas hydrate is easily formed in wellbores due to the low temperature and high pressure environment. In this study, a new, systematic, and accurate prediction method of temperature, pressure, and hydrate formation region in wellbores is developed. The mathematical models of wellbore pressure and transient heat transfer are established, the numerical solution method based on fully implicit finite difference method is developed, and the accuracy is verified by comparing with the field measured data. Combined with the hydrate phase equilibrium model, the hydrate formation region in wellbore is predicted, and the sensitivity effects of nine factors on wellbore temperature, pressure, and hydrate formation region are analyzed. Finally, the influence regularities and degree of each parameter are obtained. The increases of circulation time, geothermal gradient, displacement of drilling fluid, and injection temperature will inhibit the formation of hydrate in wellbores, and the influence degree increases in turn; the increases of wellhead backpressure and seawater depth will promote the formation of hydrate in wellbores, and the influence degree increases in turn. The changes of drilling fluid density, well depth, and hole deviation angle have little effect on the formation of hydrate in wellbores.
- Open Access
Why Should We Use Residual Thermodynamics for Calculation of Hydrate Phase Transitions?
The formation of natural gas hydrates during processing and transport of natural has historically been one of the motivations for research on hydrates. In recent years, there has been much focus on the use of hydrate as a phase for compact transport of natural gas, as well as many other applications such as desalination of seawater and the use of hydrate phase in heat pumps. The huge amounts of energy in the form of hydrates distributed in various ways in sediments is a hot topic many places around the world. Common to all these situations of hydrates in nature or industry is that temperature and pressure are both defined. Mathematically, this does not balance the number of independent variables minus conservation of mass and minus equilibrium conditions. There is a need for thermodynamic models for hydrates that can be used for non-equilibrium systems and hydrate formation from different phase, as well as different routes for hydrate dissociation. In this work we first discuss a residual thermodynamic model scheme with the more commonly used reference method for pressure temperature stability limits. However, the residual thermodynamic method stretches far beyond that to other routes for hydrate formation, such as hydrate formation from dissolved hydrate formers. More important, the residual thermodynamic method can be utilized for many thermodynamic properties involved in real hydrate systems. Consistent free energies and enthalpies are only two of these properties. In non-equilibrium systems, a consistent thermodynamic reference system (ideal gas) makes it easier to evaluate most likely distribution of phases and compositions.
Open AccessWhy Should We Use Residual Thermodynamics for Calculation of Hydrate Phase Transitions?
The formation of natural gas hydrates during processing and transport of natural has historically been one of the motivations for research on hydrates. In recent years, there has been much focus on the use of hydrate as a phase for compact transport of natural gas, as well as many other applications such as desalination of seawater and the use of hydrate phase in heat pumps. The huge amounts of energy in the form of hydrates distributed in various ways in sediments is a hot topic many places around the world. Common to all these situations of hydrates in nature or industry is that temperature and pressure are both defined. Mathematically, this does not balance the number of independent variables minus conservation of mass and minus equilibrium conditions. There is a need for thermodynamic models for hydrates that can be used for non-equilibrium systems and hydrate formation from different phase, as well as different routes for hydrate dissociation. In this work we first discuss a residual thermodynamic model scheme with the more commonly used reference method for pressure temperature stability limits. However, the residual thermodynamic method stretches far beyond that to other routes for hydrate formation, such as hydrate formation from dissolved hydrate formers. More important, the residual thermodynamic method can be utilized for many thermodynamic properties involved in real hydrate systems. Consistent free energies and enthalpies are only two of these properties. In non-equilibrium systems, a consistent thermodynamic reference system (ideal gas) makes it easier to evaluate most likely distribution of phases and compositions.
- 2 October 2019
- Published by Springer Nature
- p. 372-388
Prediction of Hydrate Formation and Decomposition in the Production of Water-Bearing Gas Reservoir in Deep Water
- 2 October 2019
- Published by Springer Nature
- p. 372-388
Prediction of Hydrate Formation and Decomposition in the Production of Water-Bearing Gas Reservoir in Deep Water
- Open Access
Stages in the Dynamics of Hydrate Formation and Consequences for Design of Experiments for Hydrate Formation in Sediments
Natural gas hydrates in sediments can never reach thermodynamic equilibrium. Every section of any hydrate-filled reservoir is unique and resides in a stationary balance that depends on many factors. Fluxes of hydrocarbons from below support formation of new hydrate, and inflow of water through fracture systems leads to hydrate dissociation. Mineral/fluid/hydrate interaction and geochemistry are some of the many other factors that determine local hydrate saturation in the pores. Even when using real sediments from coring it is impossible to reproduce in the laboratory a natural gas hydrate reservoir which has developed over geological time-scales. In this work we discuss the various stages of hydrate formation, with a focus on dynamic rate limiting processes which can lead to trapped pockets of gas and trapped liquid water inside hydrate. Heterogeneous hydrate nucleation on the interface between liquid water and the phase containing the hydrate former rapidly leads to mass transport limiting films of hydrate. These hydrate films can delay the onset of massive, and visible, hydrate growth by several hours. Heat transport in systems of liquid water and hydrate is orders of magnitude faster than mass transport. We demonstrate that a simple mass transport model is able to predict induction times for selective available experimental data for CO2 hydrate formation and CH4 hydrate formation. Another route to hydrate nucleation is towards mineral surfaces. CH4 cannot adsorb directly but can get trapped in water structures as a secondary adsorption. H2S has a significant dipole moment and can adsorb directly on mineral surfaces. The quadropole-moment in CO2 also plays a significant role in adsorption on minerals. Hydrate that nucleates toward minerals cannot stick to the mineral surfaces so the role of these nucleation sites is to produce hydrate cores for further growth elsewhere in the system. Various ways to overcome these obstacles and create realistic hydrate saturation in laboratory sediment are also discussed.
Open AccessStages in the Dynamics of Hydrate Formation and Consequences for Design of Experiments for Hydrate Formation in Sediments
Natural gas hydrates in sediments can never reach thermodynamic equilibrium. Every section of any hydrate-filled reservoir is unique and resides in a stationary balance that depends on many factors. Fluxes of hydrocarbons from below support formation of new hydrate, and inflow of water through fracture systems leads to hydrate dissociation. Mineral/fluid/hydrate interaction and geochemistry are some of the many other factors that determine local hydrate saturation in the pores. Even when using real sediments from coring it is impossible to reproduce in the laboratory a natural gas hydrate reservoir which has developed over geological time-scales. In this work we discuss the various stages of hydrate formation, with a focus on dynamic rate limiting processes which can lead to trapped pockets of gas and trapped liquid water inside hydrate. Heterogeneous hydrate nucleation on the interface between liquid water and the phase containing the hydrate former rapidly leads to mass transport limiting films of hydrate. These hydrate films can delay the onset of massive, and visible, hydrate growth by several hours. Heat transport in systems of liquid water and hydrate is orders of magnitude faster than mass transport. We demonstrate that a simple mass transport model is able to predict induction times for selective available experimental data for CO2 hydrate formation and CH4 hydrate formation. Another route to hydrate nucleation is towards mineral surfaces. CH4 cannot adsorb directly but can get trapped in water structures as a secondary adsorption. H2S has a significant dipole moment and can adsorb directly on mineral surfaces. The quadropole-moment in CO2 also plays a significant role in adsorption on minerals. Hydrate that nucleates toward minerals cannot stick to the mineral surfaces so the role of these nucleation sites is to produce hydrate cores for further growth elsewhere in the system. Various ways to overcome these obstacles and create realistic hydrate saturation in laboratory sediment are also discussed.
- Open Access
- 1 January 2019
- Published by National Library of Serbia in Thermal Science
- Vol. 23 (4) , 2179-2187
Change mechanism of transient gas-liquid two-phase flow in wellbore during marine natural gas hydrate reservoir drilling
In the drilling process of a marine natural gas hydrate reservoir, the original temperature and pressure condition of the hydrate will change due to the influence of construction, and gas will be released from the hydrate. The decomposition gas makes the wellbore flow into a complex gas-liquid-solid multiphase flow after entering into the wellbore, and thus poses a great threat to the well control security. Accordingly a transient gas-liquid two-phase flow drift flux mathematical model is established in this paper. The numerical method is proposed and verified, and an example analysis is carried out. Finally the change mechanism of transient gas-liquid two-phase flow in wellbore is obtained. This study provides an important foundation for the safe design of an offshore gas hydrate. Meanwhile, it is of great positive significance to find the decomposition gas and to optimize drilling parameters in the drilling process of a marine natural gas hydrate reservoir.
- 1 January 2019
- Published by National Library of Serbia in Thermal Science
- Vol. 23 (4) , 2179-2187
Open AccessChange mechanism of transient gas-liquid two-phase flow in wellbore during marine natural gas hydrate reservoir drilling
In the drilling process of a marine natural gas hydrate reservoir, the original temperature and pressure condition of the hydrate will change due to the influence of construction, and gas will be released from the hydrate. The decomposition gas makes the wellbore flow into a complex gas-liquid-solid multiphase flow after entering into the wellbore, and thus poses a great threat to the well control security. Accordingly a transient gas-liquid two-phase flow drift flux mathematical model is established in this paper. The numerical method is proposed and verified, and an example analysis is carried out. Finally the change mechanism of transient gas-liquid two-phase flow in wellbore is obtained. This study provides an important foundation for the safe design of an offshore gas hydrate. Meanwhile, it is of great positive significance to find the decomposition gas and to optimize drilling parameters in the drilling process of a marine natural gas hydrate reservoir.
- Open Access
- 1 January 2019
- Published by National Library of Serbia in Thermal Science
- Vol. 23 (4) , 2297-2306
Transient flows in a wellbore during killing of an empty well
Failure to adequately equipping the wellhead with appropriate well control equipment may result in a high pressure in the gas drilling when it reaches a high-yield gas layer. This would require the execution of a well killing operation to facilitate follow-up drilling and well completion. An empty well of gas-phase brings implementation of a gas-liquid two-phase transient flow, filling with killing mud. The operation may also entail coupling of the transient seepage from the formation with the gas-liquid two-phase transient flow through the wellbore. In this study, a mathematical model and a numerical method for coupling the transient gas flow through the formation with the gas-liquid two-phase transient flow in the wellbore were developed. The numerical simulation results showed that successful killing of an empty gas-drilled well required proper co-ordination of several key parameters among which the wellhead backpressure is particularly crucial to the operation. The findings of this study promise to facilitate the pro-cess design and parameter optimization for the killing of empty gas-drilled wells.
- 1 January 2019
- Published by National Library of Serbia in Thermal Science
- Vol. 23 (4) , 2297-2306
Open AccessTransient flows in a wellbore during killing of an empty well
Failure to adequately equipping the wellhead with appropriate well control equipment may result in a high pressure in the gas drilling when it reaches a high-yield gas layer. This would require the execution of a well killing operation to facilitate follow-up drilling and well completion. An empty well of gas-phase brings implementation of a gas-liquid two-phase transient flow, filling with killing mud. The operation may also entail coupling of the transient seepage from the formation with the gas-liquid two-phase transient flow through the wellbore. In this study, a mathematical model and a numerical method for coupling the transient gas flow through the formation with the gas-liquid two-phase transient flow in the wellbore were developed. The numerical simulation results showed that successful killing of an empty gas-drilled well required proper co-ordination of several key parameters among which the wellhead backpressure is particularly crucial to the operation. The findings of this study promise to facilitate the pro-cess design and parameter optimization for the killing of empty gas-drilled wells.
- Open Access
- 21 November 2018
- Published by Wiley in Energy Science & Engineering
- Vol. 6 (6) , 760-782
Multiphase non equilibrium pipe flow behaviors in the solid fluidization exploitation of marine natural gas hydrate reservoir
In recent years, marine hydrate has attracted more and more attentions. As a creative way to efficiently exploit marine hydrate, the method of solid fluidization exploitation is to excavate and crush hydrate, transport hydrate particles to sea surface platform through airtight pipeline, and obtain methane gas finally. When hydrate particles are transported up, as temperature rises and pressure drops, hydrate will decompose at a certain critical position and produce a large amount of gas, bringing complicated gas‐liquid‐solid multiphase non equilibrium pipe flow, and seriously threating well control securities. Thus, we establish mathematical models of wellbore temperature and pressure, hydrate phase equilibrium, hydrate dynamic decomposition in riser pipe flow and wellbore multiphase flow coupling hydrate dynamic decomposition, and propose and verify numerical calculation method. Then numerical model application analysis under different construction parameters is carried out, influence behaviors of multiphase non equilibrium pipe flow are obtained, and field construction measures are put forward. Properly increasing solid throughput can increase production of natural gas. However, problems such as well control risks will intensify. Therefore, delivery capacity, liquid density, and wellhead back pressure should be increased appropriately at the same time. This study provides important technical support for solid fluidization exploitation of marine hydrate.
- 21 November 2018
- Published by Wiley in Energy Science & Engineering
- Vol. 6 (6) , 760-782
Open AccessMultiphase non equilibrium pipe flow behaviors in the solid fluidization exploitation of marine natural gas hydrate reservoir
In recent years, marine hydrate has attracted more and more attentions. As a creative way to efficiently exploit marine hydrate, the method of solid fluidization exploitation is to excavate and crush hydrate, transport hydrate particles to sea surface platform through airtight pipeline, and obtain methane gas finally. When hydrate particles are transported up, as temperature rises and pressure drops, hydrate will decompose at a certain critical position and produce a large amount of gas, bringing complicated gas‐liquid‐solid multiphase non equilibrium pipe flow, and seriously threating well control securities. Thus, we establish mathematical models of wellbore temperature and pressure, hydrate phase equilibrium, hydrate dynamic decomposition in riser pipe flow and wellbore multiphase flow coupling hydrate dynamic decomposition, and propose and verify numerical calculation method. Then numerical model application analysis under different construction parameters is carried out, influence behaviors of multiphase non equilibrium pipe flow are obtained, and field construction measures are put forward. Properly increasing solid throughput can increase production of natural gas. However, problems such as well control risks will intensify. Therefore, delivery capacity, liquid density, and wellhead back pressure should be increased appropriately at the same time. This study provides important technical support for solid fluidization exploitation of marine hydrate.
- 12 July 2018
- Published by Springer Nature
- p. 1658-1672
Wellbore Flow Rules in Marine Natural Gas Hydrate Reservoir Drilling
- 12 July 2018
- Published by Springer Nature
- p. 1658-1672
Wellbore Flow Rules in Marine Natural Gas Hydrate Reservoir Drilling