Mahesh Vaidya
Mahesh Vaidya has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Alok Naugarhiya
Department of Electronics and Communication Engineering, National Institute of Technology Raipur, Chhattisgarh −492010, India
5 shared publications- Guru Prasad Mishra
Department of Electronics and Communication Engineering National Institute of Technology Raipur Raipur India
5 shared publications Shrish Verma
Department of Electronics and Communication Engineering, National Institute of Technology Raipur, Chhattisgarh −492010, India
4 shared publications- Alok Naugarhiya
National Institute of Technology Raipur
3 shared publications - Shrish Verma
Department of Electronics and Communication Engineering (ECE), NIT Raipur, India
3 shared publications Chumki Das
National Institute of Technology Raipur,Department of Electronics and Communication Engineering,Raipur,India
1 shared publication
Latest Publications
- 7 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 317-321
Insulated Gate Bipolar Transistors with Deep Trench Technology for Low Loss Switching Application
A new insulated gate bipolar transistor (IGBT) with deep trench technology is proposed to improve on-state voltage drop (Von) and turn-off energy loss (Eoff) trade-off. The Deep trench gate IGBT (DT-IGBT) increases the charge carriers along the channel, leads to improve the collector current by 58% in comparison to conventional IGBT resulting reduction on Von. Apart from that, the collector section is segregated into two-parts, namely p-col and p − -col. The lower concentration of p − -col region creates a Schottky contact with metal and increases the recombination rate by reducing minority carrier lifetime. This effect allows the device to turn-off early and shows an advancement in turn-off time further reduces the Eoff by 33% in comparison to the conventional IGBT. The reduced doping in the collector region alter the electric field of the device and enhances the breakdown voltage (BV) by 7% with respect to the conventional one.
- 7 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 317-321
Insulated Gate Bipolar Transistors with Deep Trench Technology for Low Loss Switching Application
A new insulated gate bipolar transistor (IGBT) with deep trench technology is proposed to improve on-state voltage drop (Von) and turn-off energy loss (Eoff) trade-off. The Deep trench gate IGBT (DT-IGBT) increases the charge carriers along the channel, leads to improve the collector current by 58% in comparison to conventional IGBT resulting reduction on Von. Apart from that, the collector section is segregated into two-parts, namely p-col and p − -col. The lower concentration of p − -col region creates a Schottky contact with metal and increases the recombination rate by reducing minority carrier lifetime. This effect allows the device to turn-off early and shows an advancement in turn-off time further reduces the Eoff by 33% in comparison to the conventional IGBT. The reduced doping in the collector region alter the electric field of the device and enhances the breakdown voltage (BV) by 7% with respect to the conventional one.
- 17 December 2022
- Published by Springer Nature
- p. 53-64
Low Loss Enabled Semi-superjunction 4H-SiC IGBT for High Voltage and Current Application
- 17 December 2022
- Published by Springer Nature
- p. 53-64
Low Loss Enabled Semi-superjunction 4H-SiC IGBT for High Voltage and Current Application
- 1 November 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (11) , 111008
1.2 kV Stepped Oxide Trench Insulated Gate Bipolar Transistor with Low Loss for Fast Switching Application
In this article, a gate engineering technique is used in Insulated gate bipolar transistor (IGBT) for fast switching applications. The modification consists of stepped oxide pattern at gate terminal with n-poly layer sandwiched between two p-poly layers. The oxide thickness increases from top to bottom so as to create a stepped structure. The oxide thickness is lesser on channel side and higher on collector side. The less thickness beside the channel increases gate to emitter charges (Q GE ) by extracting extra charges along the channel. The presence of these extra charges also increases the collector current density resulting reduction in the area specific on-resistance (R on .A). On the other hand, the higher thickness at the bottom side of gate offers reduction in gate to collector charges (Q GC ). Furthermore, to elongate the impact of Q GC reduction, the low doped p-col region has been facilitated which also play an important role to increase the breakdown voltage by reducing corner electric field. This p-col region creates charge extraction path to swept out charges from the drift region while turn-off event and makes the device to turn-off quickly. The collective improvement in Q GE and Q GC provides fast switching to the proposed device by improving turn-off time by 63% and also reduces turn-off loss (E off ) by 55% as compared to the conventional device. Furthermore, the change in the workfunction also provides the reduction of channel peak electric field and offers 10% increment in the BV as compared to the conventional IGBT.
- 1 November 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (11) , 111008
1.2 kV Stepped Oxide Trench Insulated Gate Bipolar Transistor with Low Loss for Fast Switching Application
In this article, a gate engineering technique is used in Insulated gate bipolar transistor (IGBT) for fast switching applications. The modification consists of stepped oxide pattern at gate terminal with n-poly layer sandwiched between two p-poly layers. The oxide thickness increases from top to bottom so as to create a stepped structure. The oxide thickness is lesser on channel side and higher on collector side. The less thickness beside the channel increases gate to emitter charges (Q GE ) by extracting extra charges along the channel. The presence of these extra charges also increases the collector current density resulting reduction in the area specific on-resistance (R on .A). On the other hand, the higher thickness at the bottom side of gate offers reduction in gate to collector charges (Q GC ). Furthermore, to elongate the impact of Q GC reduction, the low doped p-col region has been facilitated which also play an important role to increase the breakdown voltage by reducing corner electric field. This p-col region creates charge extraction path to swept out charges from the drift region while turn-off event and makes the device to turn-off quickly. The collective improvement in Q GE and Q GC provides fast switching to the proposed device by improving turn-off time by 63% and also reduces turn-off loss (E off ) by 55% as compared to the conventional device. Furthermore, the change in the workfunction also provides the reduction of channel peak electric field and offers 10% increment in the BV as compared to the conventional IGBT.
- 24 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (3) , 1604-1607
Collector Engineered Bidirectional Insulated Gate Bipolar Transistor With Low Loss
The collector engineered bidirectional insulated gate bipolar transistor (CEB-IGBT) with p-buffer and semi-superjunction (Semi-SJ) is proposed. The structural modification at collector side provides support to reverse breakdown voltage ( $BV_R$ ) in two ways. First, the p-buffer layer allows the device to deplete completely and eliminates premature breakdown effects. Second, the Semi-SJ region introduces an electric field component in the x-direction ( $E_X$ ) in order to further improve the $BV_R$ . The overall increased electric field, which is a resultant of $E_X$ and $E_Y$ , improves $BV_R$ by 53.83% compared to nonpunchthrough IGBT (NPT-IGBT). The efficient potential distribution in the drift region provides support to forward breakdown ( $BV_F$ ) as well. The n-layer below p-body acts as a field stop (FS) layer, which reduces the leakage current during the off-state condition. The p-buffer, which injects higher minority charges along the drift side and n-layer with charge storage effect collectively, provides conductivity modulation in the epitaxial region in order to increase current handling capability. This high collector current density leads to reduce $V_{{on}}$ by 14.5% compared to NPT-IGBT. Furthermore, the charge coupling effect of Semi-SJ region enables the proposed device to turn-off quickly with higher pillar doping and reduces turn-off loss ( $E_{{off}}$ ) in comparison with NPT-IGBT.- 24 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (3) , 1604-1607
Collector Engineered Bidirectional Insulated Gate Bipolar Transistor With Low Loss
The collector engineered bidirectional insulated gate bipolar transistor (CEB-IGBT) with p-buffer and semi-superjunction (Semi-SJ) is proposed. The structural modification at collector side provides support to reverse breakdown voltage ( $BV_R$ ) in two ways. First, the p-buffer layer allows the device to deplete completely and eliminates premature breakdown effects. Second, the Semi-SJ region introduces an electric field component in the x-direction ( $E_X$ ) in order to further improve the $BV_R$ . The overall increased electric field, which is a resultant of $E_X$ and $E_Y$ , improves $BV_R$ by 53.83% compared to nonpunchthrough IGBT (NPT-IGBT). The efficient potential distribution in the drift region provides support to forward breakdown ( $BV_F$ ) as well. The n-layer below p-body acts as a field stop (FS) layer, which reduces the leakage current during the off-state condition. The p-buffer, which injects higher minority charges along the drift side and n-layer with charge storage effect collectively, provides conductivity modulation in the epitaxial region in order to increase current handling capability. This high collector current density leads to reduce $V_{{on}}$ by 14.5% compared to NPT-IGBT. Furthermore, the charge coupling effect of Semi-SJ region enables the proposed device to turn-off quickly with higher pillar doping and reduces turn-off loss ( $E_{{off}}$ ) in comparison with NPT-IGBT.- 28 May 2021
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 36 (7) , 075002
A low-loss variable-doped trench-insulated gate bipolar transistor with reduced on-state voltage
The performance of a superjunction trench-insulated gate bipolar transistor with variable vertical doping in the epitaxial region along with variation in the collector layer is investigated. The concept of vertical variation transfers the avalanche multiplication point from the epitaxial edges to the middle of the pillar. The proposed device offers increased effective doping in the drift region, which reduces the on-state voltage ( V on ) without any degradation in the breakdown voltage. Furthermore, the horizontal doping variation in the collector layer supports the phenomenon in two ways: the left section of the collector layer reduces V on whereas the right portion enables an efficient discharging path, which allows improved switching performance. In addition to this, a reduction in the gate to collector charge ( Q GC ) is observed because of the presence of a lightly doped n-region below the gate terminal. A two-dimensional numerical simulation revealed that the proposed device offers a 15.30% reduction in Q GC compared with the conventional device. The structural modification offers a 40% reduction in turn-off time, resulting in a reduction in turn-off energy loss ( E off ).
- 28 May 2021
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 36 (7) , 075002
A low-loss variable-doped trench-insulated gate bipolar transistor with reduced on-state voltage
The performance of a superjunction trench-insulated gate bipolar transistor with variable vertical doping in the epitaxial region along with variation in the collector layer is investigated. The concept of vertical variation transfers the avalanche multiplication point from the epitaxial edges to the middle of the pillar. The proposed device offers increased effective doping in the drift region, which reduces the on-state voltage ( V on ) without any degradation in the breakdown voltage. Furthermore, the horizontal doping variation in the collector layer supports the phenomenon in two ways: the left section of the collector layer reduces V on whereas the right portion enables an efficient discharging path, which allows improved switching performance. In addition to this, a reduction in the gate to collector charge ( Q GC ) is observed because of the presence of a lightly doped n-region below the gate terminal. A two-dimensional numerical simulation revealed that the proposed device offers a 15.30% reduction in Q GC compared with the conventional device. The structural modification offers a 40% reduction in turn-off time, resulting in a reduction in turn-off energy loss ( E off ).
- 1 November 2020
- Published by Elsevier in Materials Today: Proceedings
- Vol. 46, 4587-4592
Lateral variation doped wide bottom trench gate IGBT for reduced on-resistance with improved gate charge
- 1 November 2020
- Published by Elsevier in Materials Today: Proceedings
- Vol. 46, 4587-4592
Lateral variation doped wide bottom trench gate IGBT for reduced on-resistance with improved gate charge
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 41 (6) , 888-891
Lateral Variation-Doped Insulated Gate Bipolar Transistor for Low On-State Voltage With Low Loss
In this letter, a new structure of Insulated Gate Bipolar Transistor (IGBT) with lateral variation doping concept in epitaxial region is presented. In the drift region, the lateral variation doping profile acts as a parasitic wide base pnp transistor over pn superjunction (SJ). This parasitic pnp transistor forms Darlington pair with IGBT’s internal pnp transistor. The parasitic Darlington pair increases the output current gain and reduces the On-state voltage drop (Von). Apart from this, p- col in the collector layer provides increment in recombination rate of minority charges. An increase in the recombination rate reduces the minority carrier life-time, which further reduces the turn-off and delay time. Improvement in the turn-off time leads to optimize the trade-off between turn-off energy loss (Eoff ) and Von, as compared to the conventional structure.
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 41 (6) , 888-891
Lateral Variation-Doped Insulated Gate Bipolar Transistor for Low On-State Voltage With Low Loss
In this letter, a new structure of Insulated Gate Bipolar Transistor (IGBT) with lateral variation doping concept in epitaxial region is presented. In the drift region, the lateral variation doping profile acts as a parasitic wide base pnp transistor over pn superjunction (SJ). This parasitic pnp transistor forms Darlington pair with IGBT’s internal pnp transistor. The parasitic Darlington pair increases the output current gain and reduces the On-state voltage drop (Von). Apart from this, p- col in the collector layer provides increment in recombination rate of minority charges. An increase in the recombination rate reduces the minority carrier life-time, which further reduces the turn-off and delay time. Improvement in the turn-off time leads to optimize the trade-off between turn-off energy loss (Eoff ) and Von, as compared to the conventional structure.
- 6 January 2020
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 35 (2) , 025015
Trench IGBT with stepped doped collector for low energy loss
In this paper, a novel technique of variation doping profile in collector region for trench IGBT is proposed. The collector region is segregated in three sections such that the section with higher concentration lies towards emitter side while section with lower concentration lie towards gate side. The presence of lightly doped collector section increases the recombination rate by injecting lesser charge carrier leading to reduction in carrier lifetime. This effect further improves turn-off process for proposed device. However, due to increased recombination rate, collector current density reduces. But, this reduction is counter balanced by heavily doped collector section which injects higher charge carriers and maintains current flow through proposed device. The electrical characteristics of proposed and conventional device is simulated and analyzed. It is inferred that proposed device exhibits 48% reduction in turn-off time further minimizing energy loss by 53.3%. The lower doping profile of collector region also reduces corner electric field but due to p ++ -col section the net electric field increases hence, improving the breakdown voltage by 8.7%. Additionally, proposed structure exhibits 16.7% increment in Baliga figure of merit as compared to conventional design.
- 6 January 2020
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 35 (2) , 025015
Trench IGBT with stepped doped collector for low energy loss
In this paper, a novel technique of variation doping profile in collector region for trench IGBT is proposed. The collector region is segregated in three sections such that the section with higher concentration lies towards emitter side while section with lower concentration lie towards gate side. The presence of lightly doped collector section increases the recombination rate by injecting lesser charge carrier leading to reduction in carrier lifetime. This effect further improves turn-off process for proposed device. However, due to increased recombination rate, collector current density reduces. But, this reduction is counter balanced by heavily doped collector section which injects higher charge carriers and maintains current flow through proposed device. The electrical characteristics of proposed and conventional device is simulated and analyzed. It is inferred that proposed device exhibits 48% reduction in turn-off time further minimizing energy loss by 53.3%. The lower doping profile of collector region also reduces corner electric field but due to p ++ -col section the net electric field increases hence, improving the breakdown voltage by 8.7%. Additionally, proposed structure exhibits 16.7% increment in Baliga figure of merit as compared to conventional design.