Su Min Ahn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Su Min Ahn has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
Hwan Yeop Jeong
Energy Materials Research Center, Korea Research Institute of Chemical Technology (KRICT), Daejeon 34114, Republic of Korea
3 shared publicationsDuk Man Yu
2 shared publications- Eun Joo Park
Los Alamos National Laboratory
2 shared publications - Heemin Park
Los Alamos National Laboratory
2 shared publications - Jong-Chan Lee
Seoul National University 1 Gwanak-Ro , Gwanak-Gu
2 shared publications Jung-Kyu Jang
Energy Materials Research Center, Korea Research Institute of Chemical Technology (KRICT), Daejeon 34114, Republic of Korea
2 shared publications
Latest Publications
- Open Access
- 12 August 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (57) , e74561
Adsorption‐Engineered Hydrocarbon Ionomers for Durable Proton‐Exchange Membrane Fuel Cells
Reducing reliance on perfluoroalkyl substances (PFAS) in proton‐exchange membrane fuel cells requires hydrocarbon ionomers that combine high performance with long‐term durability, a persistent challenge in catalyst‐layer design. Here, we identify oxidation‐driven ionomer‐catalyst interfacial degradation as a dominant failure pathway in hydrocarbon ionomer‐bonded cathodes and introduce an adsorption‐engineering strategy to overcome this limitation. The comparison of a commercial sulfonated poly(phenylene) (Pemion) with structurally engineered sulfonated poly(fluorene)s demonstrated that electrode durability is governed by the interplay between ionomer adsorption strength and resistance to oxidative degradation on carbon‐supported Pt catalysts. A poly(fluorene) ionomer with mobile alkyl sulfonic acid groups forms resilient interfaces, delivering 1.28 A cm − 2 at 0.65 V under fully humidified H 2 /air conditions (80°C and 150 kPa abs ), comparable to Pemion. After 90,000 accelerated potential cycles, the poly(fluorene)‐bonded cathode exhibits significantly improved durability, with only 29% performance loss compared to 58% for Pemion; further molecular refinement reduces the loss to 17%, approaching that of Nafion‐bonded cathodes (14%). These findings establish adsorption‐engineered ionomer design that decouples interfacial anchoring from oxidative degradation as a general strategy for achieving durable, high‐performance PFAS‐free PEM fuel cell electrodes.
- 12 August 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (57) , e74561
Open AccessAdsorption‐Engineered Hydrocarbon Ionomers for Durable Proton‐Exchange Membrane Fuel Cells
Reducing reliance on perfluoroalkyl substances (PFAS) in proton‐exchange membrane fuel cells requires hydrocarbon ionomers that combine high performance with long‐term durability, a persistent challenge in catalyst‐layer design. Here, we identify oxidation‐driven ionomer‐catalyst interfacial degradation as a dominant failure pathway in hydrocarbon ionomer‐bonded cathodes and introduce an adsorption‐engineering strategy to overcome this limitation. The comparison of a commercial sulfonated poly(phenylene) (Pemion) with structurally engineered sulfonated poly(fluorene)s demonstrated that electrode durability is governed by the interplay between ionomer adsorption strength and resistance to oxidative degradation on carbon‐supported Pt catalysts. A poly(fluorene) ionomer with mobile alkyl sulfonic acid groups forms resilient interfaces, delivering 1.28 A cm − 2 at 0.65 V under fully humidified H 2 /air conditions (80°C and 150 kPa abs ), comparable to Pemion. After 90,000 accelerated potential cycles, the poly(fluorene)‐bonded cathode exhibits significantly improved durability, with only 29% performance loss compared to 58% for Pemion; further molecular refinement reduces the loss to 17%, approaching that of Nafion‐bonded cathodes (14%). These findings establish adsorption‐engineered ionomer design that decouples interfacial anchoring from oxidative degradation as a general strategy for achieving durable, high‐performance PFAS‐free PEM fuel cell electrodes.
- 18 April 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (5) , 2392-2399
Performance-Limiting Factors of Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers
- 18 April 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (5) , 2392-2399
Performance-Limiting Factors of Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers
- 14 November 2022
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 7 (12) , 4427-4435
Highly Sulfonated Aromatic Graft Polymer with Very High Proton Conductivity and Low Hydrogen Permeability for Water Electrolysis
- 14 November 2022
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 7 (12) , 4427-4435
Highly Sulfonated Aromatic Graft Polymer with Very High Proton Conductivity and Low Hydrogen Permeability for Water Electrolysis
- Open Access
- 1 January 2022
- Published by Elsevier in Journal of Membrane Science
- Vol. 641
Perfluorocyclobutyl-containing multiblock copolymers to induce enhanced hydrophilic/hydrophobic phase separation and high proton conductivity at low humidity
- 1 January 2022
- Published by Elsevier in Journal of Membrane Science
- Vol. 641
Open AccessPerfluorocyclobutyl-containing multiblock copolymers to induce enhanced hydrophilic/hydrophobic phase separation and high proton conductivity at low humidity
- Open Access
- 16 July 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (45) , 25304-25312
Polybenzimidazole/Nafion hybrid membrane with improved chemical stability for vanadium redox flow battery application
In order to increase the chemical stability of polybenzimidazole (PBI) membrane against the highly oxidizing environment of a vanadium redox flow battery (VRFB), PBI/Nafion hybrid membrane was developed by spray coating a Nafion ionomer onto one surface of the PBI membrane. The acid–base interaction between the sulfonic acid of the Nafion and the benzimidazole of the PBI created a stable interfacial adhesion between the Nafion layer and the PBI layer. The hybrid membrane showed an area resistance of 0.269 Ω cm2 and a very low vanadium permeability of 1.95 × 10−9 cm2 min−1. The Nafion layer protected the PBI from chemical degradation under accelerated oxidizing conditions of 1 M VO2 +/5 M H2SO4, and this was subsequently examined in spectroscopic analysis. In the VRFB single cell performance test, the cell with the hybrid membrane showed better energy efficiency than the Nafion cell with 92.66% at 40 mA cm−2 and 78.1% at 100 mA cm−2 with no delamination observed between the Nafion layer and the PBI layer after the test was completed.
- 16 July 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (45) , 25304-25312
Open AccessPolybenzimidazole/Nafion hybrid membrane with improved chemical stability for vanadium redox flow battery application
In order to increase the chemical stability of polybenzimidazole (PBI) membrane against the highly oxidizing environment of a vanadium redox flow battery (VRFB), PBI/Nafion hybrid membrane was developed by spray coating a Nafion ionomer onto one surface of the PBI membrane. The acid–base interaction between the sulfonic acid of the Nafion and the benzimidazole of the PBI created a stable interfacial adhesion between the Nafion layer and the PBI layer. The hybrid membrane showed an area resistance of 0.269 Ω cm2 and a very low vanadium permeability of 1.95 × 10−9 cm2 min−1. The Nafion layer protected the PBI from chemical degradation under accelerated oxidizing conditions of 1 M VO2 +/5 M H2SO4, and this was subsequently examined in spectroscopic analysis. In the VRFB single cell performance test, the cell with the hybrid membrane showed better energy efficiency than the Nafion cell with 92.66% at 40 mA cm−2 and 78.1% at 100 mA cm−2 with no delamination observed between the Nafion layer and the PBI layer after the test was completed.