Rajesh Mehra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rajesh Mehra has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Divya Sharma
Department of Electronics and Communication Engineering, Ajay Kumar Garg Engineering College, Ghaziabad, India
9 shared publications - Balwinder Raj
Department of ECE, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, India
8 shared publications Chandni
NITTTR, Dept Elect & Commun Engn, Chandigarh 160019, India
5 shared publicationsRashmi Singh
National Institute of Technical Teachers Training and Research
4 shared publications- Chandni Devi
National Institute for Technical Teachers Training and Research
3 shared publications Gyan Prakash Pal
E&C Engineering Department, NITTTR, Chandigarh, India
3 shared publications
Latest Publications
- 13 March 2026
- Published by Pleiades Publishing Ltd in Semiconductors
- Vol. 60 (3) , 358-364
Improving the Performance of FTO/TiO2/MASnI3/Au Photovoltaic Device
This study systematically analysed various parameters affecting the efficiency of FTO/TiO2/ MASnI3/WSe2/Au photovoltaic solar cell using the SCAPS-1D simulator. Key parameters included layer thickness, defect densities, quantum efficiency and metal electrode work function. In this solar cell arrangement, WSe3 is the HTL, MASnI3 is the PAL, and TiO2 is the ETL. This optimization enhanced the power conversion efficiency (PCE) 24.55% (800 nm), increasing the tin-based perovskite solar cells’ efficiency. When Voc, Jsc, and FF were optimised, efficiency is maximised, indicating the cell’s capacity to efficiently convert sunlight into electricity with low losses.
- 13 March 2026
- Published by Pleiades Publishing Ltd in Semiconductors
- Vol. 60 (3) , 358-364
Improving the Performance of FTO/TiO2/MASnI3/Au Photovoltaic Device
This study systematically analysed various parameters affecting the efficiency of FTO/TiO2/ MASnI3/WSe2/Au photovoltaic solar cell using the SCAPS-1D simulator. Key parameters included layer thickness, defect densities, quantum efficiency and metal electrode work function. In this solar cell arrangement, WSe3 is the HTL, MASnI3 is the PAL, and TiO2 is the ETL. This optimization enhanced the power conversion efficiency (PCE) 24.55% (800 nm), increasing the tin-based perovskite solar cells’ efficiency. When Voc, Jsc, and FF were optimised, efficiency is maximised, indicating the cell’s capacity to efficiently convert sunlight into electricity with low losses.
- 12 November 2025
- Published by Pleiades Publishing Ltd in Semiconductors
- Vol. 59 (12) , 1316-1327
Comparative Analysis of the Commonly used Electron Transporting Layers in High Efficiency Perovskite Solar Cells
Since the last twelve years, efficiency of perovskite-integrated photovoltaic devices has significantly advanced as of an initial 3.8% to an impressive 27% till date. In contrast, traditional solar cells, particularly those based on silicon, have exhibited only a marginal improvement of 1.1% over the same period. This remarkable progress, fueled by the native optoelectronic behaviour of perovskites and continuous optimization of both the perovskite/active layer and electron transport layers (ETLs), have evolved as a core concept in photovoltaic research. This review brings forth an in-depth picture of various electron transport materials (ETMs) employed in perovskite-based solar cells (PSCs). It begins with the outline of architecture, framework and configuration of perovskite-based solar cells, accompanied by a thorough discussion of the role and significance of electron transport layers in enhancing device performance. The classification of electron transport materials into organic and inorganic categories is explored, with their respective merits and limitations highlighted. Particular emphasis is given to representative materials such as C60 and PCBM (organic), and ZnO, TiO2, WS2, SnO2, and CeO2 (inorganic). Furthermore, the review discusses recent advancements in the design and application of novel ETLs aiming for further optimization of performance and longevity of PSC devices.
- 12 November 2025
- Published by Pleiades Publishing Ltd in Semiconductors
- Vol. 59 (12) , 1316-1327
Comparative Analysis of the Commonly used Electron Transporting Layers in High Efficiency Perovskite Solar Cells
Since the last twelve years, efficiency of perovskite-integrated photovoltaic devices has significantly advanced as of an initial 3.8% to an impressive 27% till date. In contrast, traditional solar cells, particularly those based on silicon, have exhibited only a marginal improvement of 1.1% over the same period. This remarkable progress, fueled by the native optoelectronic behaviour of perovskites and continuous optimization of both the perovskite/active layer and electron transport layers (ETLs), have evolved as a core concept in photovoltaic research. This review brings forth an in-depth picture of various electron transport materials (ETMs) employed in perovskite-based solar cells (PSCs). It begins with the outline of architecture, framework and configuration of perovskite-based solar cells, accompanied by a thorough discussion of the role and significance of electron transport layers in enhancing device performance. The classification of electron transport materials into organic and inorganic categories is explored, with their respective merits and limitations highlighted. Particular emphasis is given to representative materials such as C60 and PCBM (organic), and ZnO, TiO2, WS2, SnO2, and CeO2 (inorganic). Furthermore, the review discusses recent advancements in the design and application of novel ETLs aiming for further optimization of performance and longevity of PSC devices.
- 12 June 2025
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 57 (6) , 1-15
Effective perovskite solar cell design employing mixed halide and copper thiocyanate
- 12 June 2025
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 57 (6) , 1-15
Effective perovskite solar cell design employing mixed halide and copper thiocyanate
- 31 January 2025
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 21 (01)
Various Materials and Structures for Heterojunction Organic Solar Cells Design for Efficiency Enhancement
The hazards of prevailing global warming on this planet have forced human beings to utilize clean energy substitutes. None of the clean energy sources could be better than the Sun. To exploit solar energy to the maximum extent, solar cells were invented. However, the solar cells ruling today’s world are all made from inorganic materials which are not only expensive but also involve complex fabrication processes. Additionally, these cells are limited to utilization on rooftops only. To overcome this scenario organic solar cells are the reliable contender to inorganic solar cells. A review of the origin and developments regarding organic solar cells is explained in this paper, and the improvement in the efficiency of a suggested organic solar cell with optimization at 800[ ]nm is 24.05%.
- 31 January 2025
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 21 (01)
Various Materials and Structures for Heterojunction Organic Solar Cells Design for Efficiency Enhancement
The hazards of prevailing global warming on this planet have forced human beings to utilize clean energy substitutes. None of the clean energy sources could be better than the Sun. To exploit solar energy to the maximum extent, solar cells were invented. However, the solar cells ruling today’s world are all made from inorganic materials which are not only expensive but also involve complex fabrication processes. Additionally, these cells are limited to utilization on rooftops only. To overcome this scenario organic solar cells are the reliable contender to inorganic solar cells. A review of the origin and developments regarding organic solar cells is explained in this paper, and the improvement in the efficiency of a suggested organic solar cell with optimization at 800[ ]nm is 24.05%.
- 20 March 2024
- Published by Springer Nature in International Journal of Information Technology
- Vol. 16 (5) , 3295-3302
Design and simulation of power efficient carbon nanotube field effect transistor based active notch filters for nano electronic applications
- 20 March 2024
- Published by Springer Nature in International Journal of Information Technology
- Vol. 16 (5) , 3295-3302
Design and simulation of power efficient carbon nanotube field effect transistor based active notch filters for nano electronic applications
- 14 December 2023
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 18 (14)
Enhancement in Efficiency of Methyl Ammonium Tin Iodide-Based Perovskite Solar Cell Using SCAPS-1D
Perovskite solar cells came to limelight owing to their simple fabrication processes, cost-effectiveness, better optoelectronic characteristics and outstanding power conversion efficiencies (PCEs). These solar cells have simply outpaced their rival cells since the alteration from aqueous hole transport layers (HTLs) to solid HTLs. Various layers of a perovskite cell viz. light absorber layer, electron transport layer (ETL) and HTL play a decisive role in ascertaining its performance. Today, various types of organic and inorganic HTLs are available but inorganic HTLs have gained an upper hand over their organic counterparts in terms of stability, cost, fabrication and material properties which represent them as a prospective candidate for optimum perovskite device. Copper antimony sulfide (CuSbS[ ] is a common HTL available in abundance with the benefit of an adequate bandwidth of 1.54[ ]eV. In addition, CuSbS2 possesses substantial band aligning and electron inhibiting features. This research paper elaborates a relative study of two perovskite solar devices possessing discrete inorganic hole transport layers, i.e., cuprous iodide (CuI) and copper antimony sulfide (CuSbS[ ], and discrete perovskite layers, i.e., MAPbI[ ]Cl[ ] and MASnI3, using the same negative charge transport layer, i.e., Cd[ ]Zn[ ]S, through numerical simulation employing SCAPS-1D. The effects of thickness, defect density and doping concentration with respect to absorbing layer on the efficiency and other parameters of perovskite layers are also discussed. By employing CuSbS2 with MASnI3 in the proposed device, the solar cell parameters are efficacious enough demonstrating the [ ] of 1.10[ ]V, PCE of 31.11%, fill factor (FF) of 83.05% and [ ] of 33.75[ ]mA[ ]⋅[ ]cm[ ].
- 14 December 2023
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 18 (14)
Enhancement in Efficiency of Methyl Ammonium Tin Iodide-Based Perovskite Solar Cell Using SCAPS-1D
Perovskite solar cells came to limelight owing to their simple fabrication processes, cost-effectiveness, better optoelectronic characteristics and outstanding power conversion efficiencies (PCEs). These solar cells have simply outpaced their rival cells since the alteration from aqueous hole transport layers (HTLs) to solid HTLs. Various layers of a perovskite cell viz. light absorber layer, electron transport layer (ETL) and HTL play a decisive role in ascertaining its performance. Today, various types of organic and inorganic HTLs are available but inorganic HTLs have gained an upper hand over their organic counterparts in terms of stability, cost, fabrication and material properties which represent them as a prospective candidate for optimum perovskite device. Copper antimony sulfide (CuSbS[ ] is a common HTL available in abundance with the benefit of an adequate bandwidth of 1.54[ ]eV. In addition, CuSbS2 possesses substantial band aligning and electron inhibiting features. This research paper elaborates a relative study of two perovskite solar devices possessing discrete inorganic hole transport layers, i.e., cuprous iodide (CuI) and copper antimony sulfide (CuSbS[ ], and discrete perovskite layers, i.e., MAPbI[ ]Cl[ ] and MASnI3, using the same negative charge transport layer, i.e., Cd[ ]Zn[ ]S, through numerical simulation employing SCAPS-1D. The effects of thickness, defect density and doping concentration with respect to absorbing layer on the efficiency and other parameters of perovskite layers are also discussed. By employing CuSbS2 with MASnI3 in the proposed device, the solar cell parameters are efficacious enough demonstrating the [ ] of 1.10[ ]V, PCE of 31.11%, fill factor (FF) of 83.05% and [ ] of 33.75[ ]mA[ ]⋅[ ]cm[ ].
- 21 November 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (45) , 21172-21191
Comparative study of hole transporting layers commonly used in high-efficiency perovskite solar cells
- 21 November 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (45) , 21172-21191
Comparative study of hole transporting layers commonly used in high-efficiency perovskite solar cells
- 28 September 2022
- Published by Springer Nature in Journal of Computational Electronics
- Vol. 22 (1) , 1-11
Mathematical modelling and simulation of CH3NH3Pb(I1−xBrx)3-based perovskite solar cells for high efficiency
- 28 September 2022
- Published by Springer Nature in Journal of Computational Electronics
- Vol. 22 (1) , 1-11
Mathematical modelling and simulation of CH3NH3Pb(I1−xBrx)3-based perovskite solar cells for high efficiency
- 19 March 2022
- Published by Elsevier in Optical Materials
- Vol. 126, 112221
Design and comparative analysis of various planar perovskite solar cells through numerical simulation using different HTLs to improve efficiency
- 19 March 2022
- Published by Elsevier in Optical Materials
- Vol. 126, 112221
Design and comparative analysis of various planar perovskite solar cells through numerical simulation using different HTLs to improve efficiency
- 7 February 2022
- Published by Springer Nature in Silicon
- Vol. 14 (15) , 9797-9804
Methods for Integration of III-V Compound and Silicon Multijunction for High Efficiency Solar Cell Design
- 7 February 2022
- Published by Springer Nature in Silicon
- Vol. 14 (15) , 9797-9804
Methods for Integration of III-V Compound and Silicon Multijunction for High Efficiency Solar Cell Design