VBValerij F. Bashev

Valerij F. Bashev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Valerij F. Bashev has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    THE EFFECT OF LOAD AND ABRASIVE PARTICLE SIZE ON THE ABRASIVE WEAR INDEX OF A POLYMER COMPOSITE BASED ON ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE

    by Oleg Popil, Anna-Mariia Tomina, Kateryna Voloshina, Valerij Bashev

    This article examines the effect of the applied load and abrasive particle size on the abrasive wear index of a polymer composite material based on ultra-high-molecular-weight polyethylene filled with 20 wt.% of the Al- 5 wt.% Cr binary alloy. The investigations were carried out at three load levels (10, 15 and 20 N) and three levels of abrasive particle size for firmly fixed abrasive particles (100, 150 and 200 µm) using a HECKERT testing machine. Design of experiments and regression analysis were employed to determine the effects of the experimental factors on the abrasive wear index of the polymer composite. The results of the studies yielded a second-order mathematical model that enables prediction of the abrasive wear index of a polymer composite based on ultra-high-molecular-weight polyethylene filled with a liquid- quenched Al-5 wt.% Cr binary alloy, depending on the applied load and abrasive particle size. The statistical significance of the coefficients and the adequacy of the mathematical model to the experimental data were assessed using the Student’s and Fisher’s criteria, respectively. It was established that the abrasive wear index is affected by both the applied load and abrasive particle size, as well as by their combined effect. The mathematical model obtained can be used to predict the abrasive wear resistance of a polymer composite and to determine appropriate operating conditions for structural and tribological components in agricultural, mining and automotive machinery operating under abrasive wear conditions.

  • Open Access

    Semi-Empi­rical Kinetic Model for Phase Selection in Rapidly Solidified Multicomponent Concentrated Alloys

    by O.I. Kushnerov, S.I. Ryabtsev, V.F. Bashev

    A semi-empirical kinetic model is formulated for phase selection in multicomponent concentrated alloys under rapid-solidification conditions. The proposed approach is based on the critical cooling rate required to suppress competing crystallization pathways and combines topology-dependent ranking of crystallization pathways leading to BCC-, FCC-, and HCP-like structures with a correction accounting for glass-forming ability. The model includes a topology-dependent correction to the effective melt viscosity and a continuous glass-forming ability correction factor based on mixing enthalpy, excess entropy, and atomic-size mismatch. Comparison with experimental and computational data shows that the proposed kinetic phase-selection criterion identifies cases in which the kinetically preferred lattice type differs from that predicted by the valence electron concentration criterion, describes kinetic suppression of phase separation, and reveals competitive multiphase crystallization. The model also distinguishes between alloys with high and low glass-forming ability. The proposed model enables evaluation of kinetic competition between crystallization pathways and identification of the probable kinetically dominant pathway in rapidly solidified multicomponent alloys.

  • Influence of nanoscale components of the immiscible W–Ba system on the emission characteristics of deposited films

    by Oleksandr Kushnerov, Sergey Ryabtsev, Pavlo Galagan, Valerij Bashev, Tatyana Kalinina, Anna-Mariia Tomina

  • FEATURES OF THERMAL COOLING MODES IN SPLAT-QUENCHING AND MICROWIRE CASTING

    by Valerii Bashev, Tatyana Kalinina, Anna-Mariia Tomina, Tatyana Dorozhka, Vladislav Fokin

    The article examines the features of thermal cooling regimes of a melt during splat quenching and micro-wire casting in glass insulation under ultra-high cooling rates. On the basis of heat-conduction equations and similarity-theory criteria, a quantitative evaluation of heat-transfer coefficients and cooling rates at the contact and free surfaces of rapidly solidified films, as well as of micro-wires with various diameters cooled in air and water, is carried out. It is established that during splat quenching, simultaneous non-equilibrium crystallisation occurs on both surfaces of the film, while the achieved degrees of supercooling (≈250—350 K) and cooling rates are sufficient for the formation of metastable structures. It is shown that a decrease in film thickness and micro-wire diameter leads to a sharp increase in both the heat-transfer coefficient and the cooling rate.

  • Open Access

    Kinetic prediction of competitive phase formation in high-entropy alloys under varying cooling rates

    by O. I. Kushnerov, S. I. Ryabtsev, V. F. Bashev

    This study presents a kinetic approach for predicting the phase constitution of multicomponent high-entropy alloys processed under non-equilibrium conditions. Unlike conventional thermodynamic, atomic-size, and electronic parameters that neglect the time-dependent nature of solidification, the proposed approach evaluates the critical cooling rate required to suppress the nucleation of competing stable and metastable phases. This allows phase stability to be assessed according to the actual time available for nucleation rather than equilibrium considerations alone. The key feature of the model is a structure-dependent viscosity parameter that captures the packing efficiency of different crystal lattices and influences atomic mobility near the solidification front. Incorporating this parameter makes it possible to distinguish between phases that are thermodynamically similar but differ in kinetic accessibility. The model is evaluated using 30 multicomponent alloys processed under near-equilibrium casting and rapid quenching. The results show that the phase exhibiting the highest kinetic stability becomes dominant, enabling stabilization of metastable states that are inaccessible under slow cooling. The proposed kinetic approach successfully explains the formation of single-phase solid solutions, ordered structures, and complex multiphase microstructures in cases where static parameters produce ambiguous or incorrect predictions.

  • Effect of melt quenching on metastable equilibrium diagrams

    by S. I. Ryabtsev, O. I. Kushnerov, V. F. Bashev, T. V. Kalinina, E. A. Mikita, P. O. Galagan

    The article investigates the influence of high cooling rates during quenching from the melt on the formation of metastable phases and the appearance of metastable equilibrium diagrams. It is shown that with increasing cooling rate, both an increase in the existence region of strongly supersaturated solid solutions and the formation of new metastable phases in binary Fe-P and Sb-Zn alloys are observed. Mechanisms of non-equilibrium crystallization during quenching from the melt are proposed, the influence of large supercooling under high cooling rate conditions on changes in the kinetics of occurring crystallization and the emerging competition during non-equilibrium crystallization of congruent and incongruent phases are demonstrated. The validity of the newly formed metastable phase in the Sb-Zn alloy is confirmed by the correctness of the dependencies of specific atomic volumes of equilibrium phases calculated using Vegard's approximation. The lattice parameters of the emerging stable and metastable phases in the alloys are calculated.

  • Open Access

    INFLUENCE OF BINARY ALLOY OF THE AL-MN SYSTEM ON THE TRIBOLOGICAL PROPERTIES OF ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE

    by Kostiantyn Yesikov, Anna-Mariia Tomina, Valerii Bashev, Nataliia Bondar, К.ю. Єсіков, А.-М.в. Томіна

    The article considers the effect of the percentage content of the liquid-quenched dispersed (50—100 μm) binary alloy of the Al-Mn system on the tribological properties of ultra-high-molecular-weight polyethylene under different operating conditions, such as the action of rigidly fixed abrasive particles and friction conditions without lubrication according to the “disk-pad” scheme. We discovered that introducing dispersed particles of a hard (HV ≈ 600 MPa) Al-11.6 % Mn alloy reduces the linear wear rate by 8.7 times and the abrasive wear index by 1.8 times compared to the pure polymer. The effect of microreinforcement explains the increase in wear resistance. It provides a uniform distribution of the applied load in the friction zone and decreases local stresses. Morphological analysis of the friction surfaces confirmed the formation of a more homogeneous surface layer structure. It is shown that increasing the alloy content to 25—30 wt. % leads to particle agglomeration, the formation of local stress concentrators, and deterioration of the tribological properties of polymer composites.

  • The effect of a rapidly quenched Al-Co alloy on the thermophysical characteristics of ultra-high-molecular-weight polyethylene

    by Kateryna Mykyta, Anna-Mariia Tomina, Valerij Bashev, Yekaterina Yeriomina, Sergey Ryabtsev

  • Open Access

    Структура та фізичні властивості швидкоохолодженого аморфного сплаву FeCo0,854Nb0,146NiB0,7Si0,3

    by Олександр Кушнерьов, Валерій Башев, Сергій Рябцев

    Purpose. The study aims to develop and characterize a new nanostructured FeCo0,854Nb0,146NiB0,7Si0,3 high-entropy metallic glass with enhanced soft magnetic and mechanical properties. The research seeks to explore the interplay between the alloy’s amorphous structure and its functional properties to advance the understanding of high-entropy metallic glasses. Design / Method / Approach. The amorphous films of the FeCo0,854Nb0,146NiB0,7Si0,3 alloy was synthesized using splat-quenching technique. The cooling rate, estimated based on the film thickness, was ~106 K/s. Structural properties were analyzed via X-ray diffraction (XRD), differential thermal analysis (DTA), and electrical resistivity measurements. Magnetic properties were assessed using a B–H curve tracer and vibrating sample magnetometer, while microhardness was measured with a PMT-3 tester. Findings. The alloy exhibits a fully glassy structure with a crystallite size of ~3 nm, low coercivity (40 A/m), high saturation magnetization (74 A·m2/kg), and microhardness ≥ 8000 MPa, indicating decent soft magnetic and mechanical properties. Theoretical Implications. The research provides significant insights into the role of atomic-size differences, configurational entropy, and thermodynamic parameters in stabilizing the glassy phase in high-entropy alloys. It advances the theoretical framework for designing high-entropy amorphous materials. Practical Implications. The characteristics of the material make it promising for use in electronic devices and mechanical engineering parts. Originality / Value. This study provides a comprehensive analysis of the high-entropy metallic glass FeCo0,854Nb0,146NiB0,7Si0,3, offering new insights of its magnetic and mechanical properties through advanced characterization techniques. Research Limitations / Future Research. Further studies are needed to investigate the long-term stability of the fabricated amorphous alloy. Article Type. Applied Research. PURL: https://purl.org/cims/4.284

  • Open Access

    Study of the influence of rapidly quenched aluminum alloy on the wear resistance of ultra-high-molecular-weight polyethylene

    by А.-М.V. Tomina, D.V. Yakovenko, V.F. Bashev, S.I. Golovko

    The article considers the influence of 5-30 wt.% dispersed (50-100 μm) AlMnCrVZrCuMgW alloy rapidly quenched from the liquid state on the wear resistance of ultra-high-molecular-weight polyethylene under different operating conditions. In particular, we studied the behaviour of the metal-polymer composite under the action of rigidly fixed abrasive particles and friction conditions without lubrication according to the “disk-pad” scheme. This simulates real operating conditions in tribological joints of mechanisms of modern machinery. The results of experimental studies showed that introducing the rapidly quenched AlMnCrVZrCuMgW alloy into the composition of the polymer material contributes to a significant improvement in its wear resistance in different modes. Thus, the abrasive wear index decreases 1,7 times compared to pure ultra-high-molecular-weight polyethylene. The increase in wear resistance is due to the increase in the resistance of the ultra-high-molecular-weight polyethylene surface to mechanical stress. This is confirmed by an increase in the hardness of the material by 1,46 times. Morphological analysis of the friction surfaces revealed a decrease in the number and depth of the ploughing grooves, which is additional confirmation of the effective action of the AlMnCrVZrCuMgW rapidly quenched alloy as a strengthening phase.