Aarón Ángel Salas-Sánchez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Aarón Ángel Salas-Sánchez has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Francisco José Ares-Pena
Department of Applied Physics, University of Santiago de Compostela, Santiago de Compostela, Spain
25 shared publications - Juan Antonio Rodríguez González
Department of Applied Physics, University of Santiago de Compostela, 15782 Santiago de Compostela, Spain
18 shared publications - Elena López-Martín
Department of Morphological Sciences, University of Santiago de Compostela, 15782 Santiago de Compostela, Spain
17 shared publications - José Leiro
Laboratory of Parasitology and Immunobiology, Institute for Research on the Aquatic Environment for Global Health (iARCUS) and Health Research Institute of Santiago de Compostela (IDIS), Universidad de Santiago de Compostela (USC), Spain
7 shared publications Alberto López-Furelos
A Department of Morphological Sciences , University of Santiago de Compostela , Santiago de Compostela , Spain
3 shared publications- Paolo Rocca
DICAM - Department of Civil, Environmental, and Mechanical Engineering, ELEDIA Research Center (ELEDIA@UniTN - University of Trento), Trento, Italy
3 shared publications
Latest Publications
- Open Access
- 5 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Electromagnetics, Antennas and Propagation
- Vol. 1 (1) , 237-248
Time-Modulated EM Skins for Integrated Sensing and Communications
An innovative solution, based on the exploitation of the harmonic beams generated by time-modulated electromagnetic skins (TM-EMSs), is proposed for the implementation of integrated sensing and communication (ISAC) functionalities in a Smart Electromagnetic Environment (SEME) scenario. More in detail, the field radiated by a user terminal, located at an unknown position, is assumed to illuminate a passive TM-EMS that, thanks to a suitable modulation of the local reflection coefficients at the meta-atom level of the EMS surface, simultaneously reflects towards a receiving base station (BS) a “sum” beam and a “difference” one at slightly different frequencies. By processing the received signals and exploiting monopulse radar tracking concepts, the BS both localizes the user terminal and, as a by-product, establishes a communication link with it by leveraging on the “sum” reflected beam. Towards this purpose, the arising harmonic beam control problem is reformulated as a global optimization one, which is successively solved by means of an evolutionary iterative approach to determine the desired TM-EMS modulation sequence. The results from selected numerical and experimental tests are reported to assess the effectiveness and the reliability of the proposed approach.
- 5 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Electromagnetics, Antennas and Propagation
- Vol. 1 (1) , 237-248
Open AccessTime-Modulated EM Skins for Integrated Sensing and Communications
An innovative solution, based on the exploitation of the harmonic beams generated by time-modulated electromagnetic skins (TM-EMSs), is proposed for the implementation of integrated sensing and communication (ISAC) functionalities in a Smart Electromagnetic Environment (SEME) scenario. More in detail, the field radiated by a user terminal, located at an unknown position, is assumed to illuminate a passive TM-EMS that, thanks to a suitable modulation of the local reflection coefficients at the meta-atom level of the EMS surface, simultaneously reflects towards a receiving base station (BS) a “sum” beam and a “difference” one at slightly different frequencies. By processing the received signals and exploiting monopulse radar tracking concepts, the BS both localizes the user terminal and, as a by-product, establishes a communication link with it by leveraging on the “sum” reflected beam. Towards this purpose, the arising harmonic beam control problem is reformulated as a global optimization one, which is successively solved by means of an evolutionary iterative approach to determine the desired TM-EMS modulation sequence. The results from selected numerical and experimental tests are reported to assess the effectiveness and the reliability of the proposed approach.
- Open Access
Optimizing Radiation Patterns of Thinned Arrays with Deep Nulls Fixed through Their Representation in the Schelkunoff Unit Circle and a Simulated Annealing Algorithm
The present work develops an innovative methodology for fixing deep nulls in radiation patterns of symmetrical thinned arrays while maintaining a low side lobe level (SLL) and a high directivity, implementing an optimization strategy based on the simulated annealing algorithm (SA). This procedure optimizes a cost function that has a term for each characteristic of the desired radiation pattern and can distinguish between the deep nulls and the filled ones depending on whether they are on the Schelkunoff unit circle or not. Then, a direct extension of the methodology for planar arrays based on the separable distribution procedure is addressed. Consequently, some examples with half-wavelength spacing are presented, where the fixing of one, two, or three deep nulls in arrays of 40, 60, and 80 elements are illustrated as well as an extension to a 40 × 40-element planar array with rectangular grid and rectangular boundary, with two deep nulls fixed on each one of its main axes. Additionally, a comparison of the obtained results with a genetic algorithm (GA) alternative is performed. The main advantage of the proposed method is its ability to fix deep nulls in the radiation patterns, while maintaining an easy feeding network implementation.
Open AccessOptimizing Radiation Patterns of Thinned Arrays with Deep Nulls Fixed through Their Representation in the Schelkunoff Unit Circle and a Simulated Annealing Algorithm
The present work develops an innovative methodology for fixing deep nulls in radiation patterns of symmetrical thinned arrays while maintaining a low side lobe level (SLL) and a high directivity, implementing an optimization strategy based on the simulated annealing algorithm (SA). This procedure optimizes a cost function that has a term for each characteristic of the desired radiation pattern and can distinguish between the deep nulls and the filled ones depending on whether they are on the Schelkunoff unit circle or not. Then, a direct extension of the methodology for planar arrays based on the separable distribution procedure is addressed. Consequently, some examples with half-wavelength spacing are presented, where the fixing of one, two, or three deep nulls in arrays of 40, 60, and 80 elements are illustrated as well as an extension to a 40 × 40-element planar array with rectangular grid and rectangular boundary, with two deep nulls fixed on each one of its main axes. Additionally, a comparison of the obtained results with a genetic algorithm (GA) alternative is performed. The main advantage of the proposed method is its ability to fix deep nulls in the radiation patterns, while maintaining an easy feeding network implementation.
- Open Access
Using Antenna Arrays with Only One Active Element for Beam Reconfiguration and Sensitive Study in Dielectric Media
Antenna array pattern reconfiguration is usually achieved by changing the relative amplitudes and/or phases of the excitation distribution present in the array, at the cost of complex feeding networks. In this work, the mechanical displacement of a parasitic array perpendicular to another array with a single driven element is proposed. Additionally, the antenna is optimized addressing the variation of its response led by changes of the environmental dielectric constant of a surrounding gaseous medium. In such a way, a novel multipurpose antenna of utmost simplicity is obtained. From the computation of the self and mutual impedances, a control of the antenna radiation pattern by means of the induced currents in the parasitic elements is modelled. To illustrate the procedure, the technique will be applied to the variation of the side lobe level of a pencil beam and to obtain a flat-topped broadside beam from the same pencil beam, something with high interest for satellite applications. The proposed methodology represents an advance on the development of multipurpose antennas which resounds in simplicity not only in the reconfiguration of antenna beams, but in applications for the detection of particulate matter and/or measurements of the atmospheric dielectric constant.
Open AccessUsing Antenna Arrays with Only One Active Element for Beam Reconfiguration and Sensitive Study in Dielectric Media
Antenna array pattern reconfiguration is usually achieved by changing the relative amplitudes and/or phases of the excitation distribution present in the array, at the cost of complex feeding networks. In this work, the mechanical displacement of a parasitic array perpendicular to another array with a single driven element is proposed. Additionally, the antenna is optimized addressing the variation of its response led by changes of the environmental dielectric constant of a surrounding gaseous medium. In such a way, a novel multipurpose antenna of utmost simplicity is obtained. From the computation of the self and mutual impedances, a control of the antenna radiation pattern by means of the induced currents in the parasitic elements is modelled. To illustrate the procedure, the technique will be applied to the variation of the side lobe level of a pencil beam and to obtain a flat-topped broadside beam from the same pencil beam, something with high interest for satellite applications. The proposed methodology represents an advance on the development of multipurpose antennas which resounds in simplicity not only in the reconfiguration of antenna beams, but in applications for the detection of particulate matter and/or measurements of the atmospheric dielectric constant.
- Open Access
- 12 May 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (10) , 5103
Exposure to 2.45 GHz Radiation Triggers Changes in HSP-70, Glucocorticoid Receptors and GFAP Biomarkers in Rat Brain
Brain tissue may be especially sensitive to electromagnetic phenomena provoking signs of neural stress in cerebral activity. Fifty-four adult female Sprague-Dawley rats underwent ELISA and immunohistochemistry testing of four relevant anatomical areas of the cerebrum to measure biomarkers indicating induction of heat shock protein 70 (HSP-70), glucocorticoid receptors (GCR) or glial fibrillary acidic protein (GFAP) after single or repeated exposure to 2.45 GHz radiation in the experimental set-up. Neither radiation regime caused tissue heating, so thermal effects can be ruled out. A progressive decrease in GCR and HSP-70 was observed after acute or repeated irradiation in the somatosensory cortex, hypothalamus and hippocampus. In the limbic cortex; however, values for both biomarkers were significantly higher after repeated exposure to irradiation when compared to control animals. GFAP values in brain tissue after irradiation were not significantly different or were even lower than those of nonirradiated animals in all brain regions studied. Our results suggest that repeated exposure to 2.45 GHz elicited GCR/HSP-70 dysregulation in the brain, triggering a state of stress that could decrease tissue anti-inflammatory action without favoring glial proliferation and make the nervous system more vulnerable.
- 12 May 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (10) , 5103
Open AccessExposure to 2.45 GHz Radiation Triggers Changes in HSP-70, Glucocorticoid Receptors and GFAP Biomarkers in Rat Brain
Brain tissue may be especially sensitive to electromagnetic phenomena provoking signs of neural stress in cerebral activity. Fifty-four adult female Sprague-Dawley rats underwent ELISA and immunohistochemistry testing of four relevant anatomical areas of the cerebrum to measure biomarkers indicating induction of heat shock protein 70 (HSP-70), glucocorticoid receptors (GCR) or glial fibrillary acidic protein (GFAP) after single or repeated exposure to 2.45 GHz radiation in the experimental set-up. Neither radiation regime caused tissue heating, so thermal effects can be ruled out. A progressive decrease in GCR and HSP-70 was observed after acute or repeated irradiation in the somatosensory cortex, hypothalamus and hippocampus. In the limbic cortex; however, values for both biomarkers were significantly higher after repeated exposure to irradiation when compared to control animals. GFAP values in brain tissue after irradiation were not significantly different or were even lower than those of nonirradiated animals in all brain regions studied. Our results suggest that repeated exposure to 2.45 GHz elicited GCR/HSP-70 dysregulation in the brain, triggering a state of stress that could decrease tissue anti-inflammatory action without favoring glial proliferation and make the nervous system more vulnerable.
- Open Access
An Improved Pattern Synthesis Iterative Method in Planar Arrays for Obtaining Efficient Footprints with Arbitrary Boundaries
In the present paper, an iterative technique devoted to reproducing efficient footprints with arbitrary boundaries for planar arrays is addressed. The methodology here depicted is based on exploiting the nature of the continuous aperture distribution by expressing it as a Fourier series of moderately high orders. In this manner, the resulting illumination boundary is defined by a target three-dimensional flat-topped pattern composed of stretching and shrinking modified circular Taylor patterns and the maximum order of the series to obtain a good reconstruction is determined by means of the iterative process. Examples and comparisons with the previous literature were conducted by analyzing square and rectangular contoured beams as test cases. Additionally, interesting potentials regarding space applications from a geostationary satellite are outlined by means of the EuTELSAT (European Telecommunications Satellite Organization) European coverage case study. In such a way, its numerical approach was analyzed by including subarray architectures and discussing improvements about dynamic range ratio of the excitations without critical power losses within the illumination region.
Open AccessAn Improved Pattern Synthesis Iterative Method in Planar Arrays for Obtaining Efficient Footprints with Arbitrary Boundaries
In the present paper, an iterative technique devoted to reproducing efficient footprints with arbitrary boundaries for planar arrays is addressed. The methodology here depicted is based on exploiting the nature of the continuous aperture distribution by expressing it as a Fourier series of moderately high orders. In this manner, the resulting illumination boundary is defined by a target three-dimensional flat-topped pattern composed of stretching and shrinking modified circular Taylor patterns and the maximum order of the series to obtain a good reconstruction is determined by means of the iterative process. Examples and comparisons with the previous literature were conducted by analyzing square and rectangular contoured beams as test cases. Additionally, interesting potentials regarding space applications from a geostationary satellite are outlined by means of the EuTELSAT (European Telecommunications Satellite Organization) European coverage case study. In such a way, its numerical approach was analyzed by including subarray architectures and discussing improvements about dynamic range ratio of the excitations without critical power losses within the illumination region.
- 1 February 2021
- Published by Elsevier in Tissue and Cell
- Vol. 68, 101478
Exposure to 2.45 GHz radiofrequency modulates calcitonin-dependent activity and HSP-90 protein in parafollicular cells of rat thyroid gland
- 1 February 2021
- Published by Elsevier in Tissue and Cell
- Vol. 68, 101478
Exposure to 2.45 GHz radiofrequency modulates calcitonin-dependent activity and HSP-90 protein in parafollicular cells of rat thyroid gland
- Open Access
- 14 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 13636-13642
Enhanced Multiplicity on Shaped Patterns by Introducing Symmetric Pure Real Distributions: Taylor Linear and Circular Sources
The techniques on the generation of multiple solutions in shaped-beam pattern synthesis are standardly focused on the use of patterns with complex nature as input. Otherwise, in order to derive a symmetric pure real distribution from the canonical pattern synthesis techniques, a generation of a pure-real pattern has to be imposed. In the present work, the exploitation of the multiplicity of the shaped pattern generated by this symmetric pure real distribution is proposed, without constraining the solutions to necessarily meet the pure-real pattern requirement. Therefore, an increase on the degrees of freedom is produced and a greater number of continuous distributions (presenting different natures) is achieved, by omitting the restrictions found in the state-of-the-art methodologies. Thus, a general multiplicity of solutions can be reached and the design protocol can increase its number of alternatives for facing different feeding network structures. In such a way, this paper is devoted to illustrate the improvements in terms of number of feasible solutions reached by the general method, including alternative symmetric pure real distributions as input within the procedure. In this manner, two different approaches, constraining the pattern to present the same number of ripples or a similar main beam width, are discussed. Examples of both Taylor distributions linear and circular are illustrated.
- 14 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 13636-13642
Open AccessEnhanced Multiplicity on Shaped Patterns by Introducing Symmetric Pure Real Distributions: Taylor Linear and Circular Sources
The techniques on the generation of multiple solutions in shaped-beam pattern synthesis are standardly focused on the use of patterns with complex nature as input. Otherwise, in order to derive a symmetric pure real distribution from the canonical pattern synthesis techniques, a generation of a pure-real pattern has to be imposed. In the present work, the exploitation of the multiplicity of the shaped pattern generated by this symmetric pure real distribution is proposed, without constraining the solutions to necessarily meet the pure-real pattern requirement. Therefore, an increase on the degrees of freedom is produced and a greater number of continuous distributions (presenting different natures) is achieved, by omitting the restrictions found in the state-of-the-art methodologies. Thus, a general multiplicity of solutions can be reached and the design protocol can increase its number of alternatives for facing different feeding network structures. In such a way, this paper is devoted to illustrate the improvements in terms of number of feasible solutions reached by the general method, including alternative symmetric pure real distributions as input within the procedure. In this manner, two different approaches, constraining the pattern to present the same number of ripples or a similar main beam width, are discussed. Examples of both Taylor distributions linear and circular are illustrated.
- Open Access
Multiple Solutions Starting from Real Shaped Beams in Equispaced Linear Arrays
In the present work, the theoretical basis of the multiplicity of solutions obtained from an initial real symmetric distribution is derived. This initial solution is devoted to generating an equivalent pure real shaped-beam pattern for a concrete synthesis scenario. However, these new solutions are not based on real symmetric distributions; hence, not based on the generation of pure real patterns. The bandwidth performances and tolerance to errors provided by the multiple solutions in the array design are analyzed by considering different architectures, also including mutual coupling models and element factor expressions due to accuracy purposes. In addition, a technique to obtain efficient linear arrays by designing resonant structures is addressed. Examples involving both standard linear arrays of half-wavelength cylindrical dipoles and resonant linear arrays generating flat-top beam patterns are reported and discussed. Additionally, an extension to planar arrays performed by means of a generalisation of the Baklanov transformation through collapsed distribution techniques inspired in the well-known method devised by Tseng and Cheng is performed. In such a way, an analysis of the quality of solutions for generating circular and elliptical footprints with controlled both SLL and ripple which are highly interesting in the framework of space vehicle applications.
Open AccessMultiple Solutions Starting from Real Shaped Beams in Equispaced Linear Arrays
In the present work, the theoretical basis of the multiplicity of solutions obtained from an initial real symmetric distribution is derived. This initial solution is devoted to generating an equivalent pure real shaped-beam pattern for a concrete synthesis scenario. However, these new solutions are not based on real symmetric distributions; hence, not based on the generation of pure real patterns. The bandwidth performances and tolerance to errors provided by the multiple solutions in the array design are analyzed by considering different architectures, also including mutual coupling models and element factor expressions due to accuracy purposes. In addition, a technique to obtain efficient linear arrays by designing resonant structures is addressed. Examples involving both standard linear arrays of half-wavelength cylindrical dipoles and resonant linear arrays generating flat-top beam patterns are reported and discussed. Additionally, an extension to planar arrays performed by means of a generalisation of the Baklanov transformation through collapsed distribution techniques inspired in the well-known method devised by Tseng and Cheng is performed. In such a way, an analysis of the quality of solutions for generating circular and elliptical footprints with controlled both SLL and ripple which are highly interesting in the framework of space vehicle applications.
- Open Access
- 7 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 184004-184012
Improvement of Edge Brightening by Means of Q Factor Minimization in Circular Antenna Apertures: High Efficient Taylor-Like Patterns
Implications and improvements of edge brightening effects led by Q factor minimization restricted to keep the same level of directivity for high efficiency continuous circular aperture distributions are here reported. In this manner, an optimization strategy for a minimum Q value –keeping the same level of efficiency and restricting the maximum sidelobe level (SLL)– is envisaged. As application of the method, a design procedure devoted to reduce the Q factor of the antenna aperture distributions while keeping a high level of efficiency is outlined. Then, these optimal Taylor distributions are used as initial point to develop an optimization strategy. This procedure is devoted to search Taylor-like distributions which offer a good compromise between low Q factor and high efficiency values with potentials for the antenna design scenario, based on a decrease in edge brightening effects led by the minimization of the aforementioned Q ratio.
- 7 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 184004-184012
Open AccessImprovement of Edge Brightening by Means of Q Factor Minimization in Circular Antenna Apertures: High Efficient Taylor-Like Patterns
Implications and improvements of edge brightening effects led by Q factor minimization restricted to keep the same level of directivity for high efficiency continuous circular aperture distributions are here reported. In this manner, an optimization strategy for a minimum Q value –keeping the same level of efficiency and restricting the maximum sidelobe level (SLL)– is envisaged. As application of the method, a design procedure devoted to reduce the Q factor of the antenna aperture distributions while keeping a high level of efficiency is outlined. Then, these optimal Taylor distributions are used as initial point to develop an optimization strategy. This procedure is devoted to search Taylor-like distributions which offer a good compromise between low Q factor and high efficiency values with potentials for the antenna design scenario, based on a decrease in edge brightening effects led by the minimization of the aforementioned Q ratio.