Takenori Atsumi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Takenori Atsumi has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Shota Yabui
Faculty of Science and Engineering, Tokyo City University, Tokyo, Japan
18 shared publications William C. Messner
Dept. of Mech. Eng., Tufts Univ., Medford, MA, USA
10 shared publicationsAtsushi Okuyama
School of Engineering, Tokai University
6 shared publicationsShigeo Nakamura
HGST Japan, Ltd., Fujisawa, Japan
6 shared publicationsShigeyuki Nakadai
Department of Mechanical Engineering, Chiba Institute of Technology
6 shared publicationsToshihiro Arisaka
Hitachi, Ltd
4 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 139819-139830
Disturbance Rejection in Quadruple-Stage Actuator HDD Servos via RCBode-Plot- Guided Loop Shaping
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 139819-139830
Open AccessDisturbance Rejection in Quadruple-Stage Actuator HDD Servos via RCBode-Plot- Guided Loop Shaping
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (2) , 1-10
Robust Loop-Shaping Method for Decoupled Control Systems of HDD Triple-Stage Actuators Using RCBode Plot
Modern hard disk drives (HDDs) employ triple-stage actuators (TSAs) to meet demanding data storage requirements. The control systems for these actuators are typically designed with a decoupled structure to simplify the control design process. However, a significant challenge remains: achieving robust performance against system perturbations while maintaining this decoupled structure. This paper proposes a novel control design method that addresses this issue. Our approach allows for the design of a robust control system for TSA systems without the need for complex, unintuitive algorithms or cumbersome design procedures, which are often difficult to implement in an industrial setting. By applying a robust loop-shaping framework, specifically, the Robust Controller Bode (RCBode) plot, within the domain of classical control theory, our proposed method enables designers to achieve high-performance robust control simply by shaping a filter based on clear guidelines on a Bode plot, thereby avoiding complex modeling and intricate mathematical derivations. The effectiveness of the proposed method is validated through simulations based on the HDD benchmark problem, demonstrating excellent robust performance against disturbances encountered in data center environments.
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (2) , 1-10
Robust Loop-Shaping Method for Decoupled Control Systems of HDD Triple-Stage Actuators Using RCBode Plot
Modern hard disk drives (HDDs) employ triple-stage actuators (TSAs) to meet demanding data storage requirements. The control systems for these actuators are typically designed with a decoupled structure to simplify the control design process. However, a significant challenge remains: achieving robust performance against system perturbations while maintaining this decoupled structure. This paper proposes a novel control design method that addresses this issue. Our approach allows for the design of a robust control system for TSA systems without the need for complex, unintuitive algorithms or cumbersome design procedures, which are often difficult to implement in an industrial setting. By applying a robust loop-shaping framework, specifically, the Robust Controller Bode (RCBode) plot, within the domain of classical control theory, our proposed method enables designers to achieve high-performance robust control simply by shaping a filter based on clear guidelines on a Bode plot, thereby avoiding complex modeling and intricate mathematical derivations. The effectiveness of the proposed method is validated through simulations based on the HDD benchmark problem, demonstrating excellent robust performance against disturbances encountered in data center environments.
- 10 December 2025
- Published by Elsevier in Mechatronics
- Vol. 114
RCBode plot-based controller design for dual-stage actuators in HDDs
- 10 December 2025
- Published by Elsevier in Mechatronics
- Vol. 114
RCBode plot-based controller design for dual-stage actuators in HDDs
- Open Access
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 201006-201017
Adaptive Feedforward Cancellation Scheme Temporarily Using Negative Damping to Speed Up the Transient Response When Counteracting Periodic Disturbances
Adaptive Feedforward Cancellation (AFC) is commonly used to counteract periodic disturbances in mechatronic systems in order to enhance the control performance. So far, AFC algorithms either use no or positive damping. In this research, we investigate the behavior of AFC algorithms deliberately using negative damping in both simulation and experiment. While their frequency responses are mostly comparable, we find that the deliberate introduction of negative damping can significantly speed up the initial transient response of the AFC but then overcompensates, resulting in a steady-state error. Motivated by this, we then propose and experimentally test a new AFC algorithm that initially uses negative damping to secure a fast transient response and then switches off the damping in order prevent the overcompensation and secure a zero steady-state error.
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 201006-201017
Open AccessAdaptive Feedforward Cancellation Scheme Temporarily Using Negative Damping to Speed Up the Transient Response When Counteracting Periodic Disturbances
Adaptive Feedforward Cancellation (AFC) is commonly used to counteract periodic disturbances in mechatronic systems in order to enhance the control performance. So far, AFC algorithms either use no or positive damping. In this research, we investigate the behavior of AFC algorithms deliberately using negative damping in both simulation and experiment. While their frequency responses are mostly comparable, we find that the deliberate introduction of negative damping can significantly speed up the initial transient response of the AFC but then overcompensates, resulting in a steady-state error. Motivated by this, we then propose and experimentally test a new AFC algorithm that initially uses negative damping to secure a fast transient response and then switches off the damping in order prevent the overcompensation and secure a zero steady-state error.
- Open Access
- 1 January 2025
- Published by Japan Society of Mechanical Engineers in Journal of Advanced Mechanical Design, Systems, and Manufacturing
- Vol. 19 (4) , JAMDSM0041
Practical loop-shaping strategy for ensuring robust performance in MISO systems
This paper presents a loop-shaping methodology for enhancing robust performance in Multi-Input-Single-Output (MISO) control systems. The core of our approach lies in the Robust Bode (RBode) plot, a graphical tool that extends conventional Bode analysis to facilitate robust control design. By offering visual guidelines on the open-loop Bode diagram, the RBode plot enables effective disturbance rejection and robustness against plant uncertainties. In contrast to conventional methods that rely on converting MISO systems into equivalent Single-Input-Single-Output (SISO) representations, the proposed methodology allows for direct loop shaping of each individual channel in the MISO configuration. Consequently, it achieves effective frequency-domain shaping in control regions where SISO-based transformations often fail to provide sufficient performance. The efficacy of this method is validated through a case study on magnetic-head positioning control for hard disk drives.
- 1 January 2025
- Published by Japan Society of Mechanical Engineers in Journal of Advanced Mechanical Design, Systems, and Manufacturing
- Vol. 19 (4) , JAMDSM0041
Open AccessPractical loop-shaping strategy for ensuring robust performance in MISO systems
This paper presents a loop-shaping methodology for enhancing robust performance in Multi-Input-Single-Output (MISO) control systems. The core of our approach lies in the Robust Bode (RBode) plot, a graphical tool that extends conventional Bode analysis to facilitate robust control design. By offering visual guidelines on the open-loop Bode diagram, the RBode plot enables effective disturbance rejection and robustness against plant uncertainties. In contrast to conventional methods that rely on converting MISO systems into equivalent Single-Input-Single-Output (SISO) representations, the proposed methodology allows for direct loop shaping of each individual channel in the MISO configuration. Consequently, it achieves effective frequency-domain shaping in control regions where SISO-based transformations often fail to provide sufficient performance. The efficacy of this method is validated through a case study on magnetic-head positioning control for hard disk drives.
- Open Access
- 1 January 2025
- Published by Japan Society of Mechanical Engineers in Journal of Advanced Mechanical Design, Systems, and Manufacturing
- Vol. 19 (2) , JAMDSM0020
Feedforward control with sampled-data polynomial based on triangle hold for track seek of hard disk drive
This research proposes feedforward control techniques aimed at reducing the seek time in hard disk drives (HDDs). These techniques utilize a sampled-data polynomial approach based on a triangular approximation first-order hold (triangle hold) with a non-zero initial value. In the first proposed method, we developed a sampled-data polynomial that allows for arbitrary initial values of the acceleration trajectory. In the second proposed method, to reduce computational load, we employ an approximate initial value for the acceleration trajectory in the sampled-data polynomial. These methods improve the seek time of the magnetic-head positioning control system in HDDs, primarily because the triangle hold offers a faster response compared to the traditional zero-order hold (ZOH). Moreover, these methods improve the seek time over the conventional method with the causal first-order hold (CFOH) because the triangle hold reduces the amplitude of transient vibrations. Validation results for the track-seek control of HDDs demonstrate that the proposed methods effectively reduce seek time compared to conventional methods.
- 1 January 2025
- Published by Japan Society of Mechanical Engineers in Journal of Advanced Mechanical Design, Systems, and Manufacturing
- Vol. 19 (2) , JAMDSM0020
Open AccessFeedforward control with sampled-data polynomial based on triangle hold for track seek of hard disk drive
This research proposes feedforward control techniques aimed at reducing the seek time in hard disk drives (HDDs). These techniques utilize a sampled-data polynomial approach based on a triangular approximation first-order hold (triangle hold) with a non-zero initial value. In the first proposed method, we developed a sampled-data polynomial that allows for arbitrary initial values of the acceleration trajectory. In the second proposed method, to reduce computational load, we employ an approximate initial value for the acceleration trajectory in the sampled-data polynomial. These methods improve the seek time of the magnetic-head positioning control system in HDDs, primarily because the triangle hold offers a faster response compared to the traditional zero-order hold (ZOH). Moreover, these methods improve the seek time over the conventional method with the causal first-order hold (CFOH) because the triangle hold reduces the amplitude of transient vibrations. Validation results for the track-seek control of HDDs demonstrate that the proposed methods effectively reduce seek time compared to conventional methods.
- Open Access
- 1 September 2024
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Journal of Industry Applications
- Vol. 13 (5) , 512-519
Feedforward Control for Track Seeking Control in Hard Disk Drive with Sampled-Data Polynomial Based on Causal First-Order Hold
This study presents a feedforward control method that reduces the seek time of hard disk drives (HDDs) using a sampled-data polynomial based on a causal first-order hold (CFOH). The method improves the seek time of the magnetic-head positioning control system of the HDDs, primarily because the CFOH responds faster than the conventional zero-order hold (ZOH). The sampled-data polynomial enables easy and real-time calculation of the feedforward control input using polynomials, eliminating the need for memory-consuming lookup tables. The sampled-data polynomial for CFOH meets the boundary conditions, including the CFOH characteristics. Moreover, it effectively corrects the discretization error caused by the CFOH without complex calculations. Replacing the ZOH with the CFOH in the feedforward control system of the HDDs improves the performance significantly. Simulation results of the track seeking control of the HDDs confirm that the proposed method successfully reduces the seek time compared to a conventional method.
- 1 September 2024
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Journal of Industry Applications
- Vol. 13 (5) , 512-519
Open AccessFeedforward Control for Track Seeking Control in Hard Disk Drive with Sampled-Data Polynomial Based on Causal First-Order Hold
This study presents a feedforward control method that reduces the seek time of hard disk drives (HDDs) using a sampled-data polynomial based on a causal first-order hold (CFOH). The method improves the seek time of the magnetic-head positioning control system of the HDDs, primarily because the CFOH responds faster than the conventional zero-order hold (ZOH). The sampled-data polynomial enables easy and real-time calculation of the feedforward control input using polynomials, eliminating the need for memory-consuming lookup tables. The sampled-data polynomial for CFOH meets the boundary conditions, including the CFOH characteristics. Moreover, it effectively corrects the discretization error caused by the CFOH without complex calculations. Replacing the ZOH with the CFOH in the feedforward control system of the HDDs improves the performance significantly. Simulation results of the track seeking control of the HDDs confirm that the proposed method successfully reduces the seek time compared to a conventional method.
- Open Access
- 1 May 2024
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Journal of Industry Applications
- Vol. 13 (3) , 270-279
Feedback Controller Optimization for Mechatronic Systems with Unexpected Plant Perturbations Using Support Vector Machine
This study aimed to introduce a simple optimization method that can enhance the feedback control system of mechatronic systems. This method can cope with unexpected plant perturbations without needing any dynamic models or frequency response knowledge of the system. The method uses support vector machine (SVM) techniques to fine-tune feedback controller parameters according to the experimental classification results. The method separates “success” and “failure” classes using hyperplanes and optimizes the parameters to achieve the desired performance. It enables control engineers to attain the desired robust performance without relying on any dynamic models, even for unstable and multi-output systems. To demonstrate the effectiveness of this method, we apply it to an inverted pendulum robot and show that it can achieve the desired performance against individual variations. This method can be applied to various mechatronic systems that face uncertainties and disturbances in their operating environments and has the potential to be widely used in the field of mechatronics.
- 1 May 2024
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Journal of Industry Applications
- Vol. 13 (3) , 270-279
Open AccessFeedback Controller Optimization for Mechatronic Systems with Unexpected Plant Perturbations Using Support Vector Machine
This study aimed to introduce a simple optimization method that can enhance the feedback control system of mechatronic systems. This method can cope with unexpected plant perturbations without needing any dynamic models or frequency response knowledge of the system. The method uses support vector machine (SVM) techniques to fine-tune feedback controller parameters according to the experimental classification results. The method separates “success” and “failure” classes using hyperplanes and optimizes the parameters to achieve the desired performance. It enables control engineers to attain the desired robust performance without relying on any dynamic models, even for unstable and multi-output systems. To demonstrate the effectiveness of this method, we apply it to an inverted pendulum robot and show that it can achieve the desired performance against individual variations. This method can be applied to various mechatronic systems that face uncertainties and disturbances in their operating environments and has the potential to be widely used in the field of mechatronics.
- Open Access
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 60299-60309
Adaptive Feedforward Cancellation for Precise Repetitive Motion in Coarse-Fine Control System
This paper introduces a novel control scheme to achieve precise repetitive motion within a dual-input-single-output (DISO) system consisting of course-actuator and fine-actuator. Repetitive motion stands as a crucial operation in various applications, particularly in manufacturing processes. Designing a control system capable of accurately tracking reference signals during repetitive motion is imperative for DISO systems. The proposed method focuses on adaptive feed-forward cancellation (AFC) to effectively compensate for position error signals related to the reference signal. A typical control scheme implements AFC for the entire control loop. In the control system, the same characteristic of AFC works for both actuators in the DISO control system. The same AFC output is working to both actuators. On the other hand, the proposed control scheme implements AFC to each actuator. It can generate suitable AFC output for the course-actuator, fine-actuator, respectively. That is, the major contribution of proposed control scheme individually optimizes the AFC in the course-fine control system. This design approach significantly enhances the control performance of DISO systems, considering the distinctive characteristics and stroke limitations of the actuators. Experimental implementation of the proposed control system validated its efficacy, affirming the improvement of control performance in DISO systems.
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 60299-60309
Open AccessAdaptive Feedforward Cancellation for Precise Repetitive Motion in Coarse-Fine Control System
This paper introduces a novel control scheme to achieve precise repetitive motion within a dual-input-single-output (DISO) system consisting of course-actuator and fine-actuator. Repetitive motion stands as a crucial operation in various applications, particularly in manufacturing processes. Designing a control system capable of accurately tracking reference signals during repetitive motion is imperative for DISO systems. The proposed method focuses on adaptive feed-forward cancellation (AFC) to effectively compensate for position error signals related to the reference signal. A typical control scheme implements AFC for the entire control loop. In the control system, the same characteristic of AFC works for both actuators in the DISO control system. The same AFC output is working to both actuators. On the other hand, the proposed control scheme implements AFC to each actuator. It can generate suitable AFC output for the course-actuator, fine-actuator, respectively. That is, the major contribution of proposed control scheme individually optimizes the AFC in the course-fine control system. This design approach significantly enhances the control performance of DISO systems, considering the distinctive characteristics and stroke limitations of the actuators. Experimental implementation of the proposed control system validated its efficacy, affirming the improvement of control performance in DISO systems.
- Open Access
- 1 March 2024
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Journal of Industry Applications
- Vol. 13 (2) , 208-214
Study of Increased Wind Noise by Active Noise Cancellation Headphones
In this paper, we investigated the cause of the increased wind noise by the active noise cancellation (ANC) headphones under windy conditions. Initially, we conducted experiments comparing both feedforward and feedback types of ANC under windy conditions. Subsequently, we formulated a hypothesis for the cause of amplified wind noise in ANC headphones as follows: The feedforward type ANC may introduce additional noise into the user’s eardrum when its microphone, used for feedforward control, captures low acoustic power sounds. To validate this hypothesis, we conducted experiments using reproduced wind noise sounds played using a speaker (high acoustic power) or an earphone (low acoustic power) with feedforward type ANC headphones. Our findings provide robust confirmation that the experimental results align with and support our proposed hypothesis.
- 1 March 2024
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Journal of Industry Applications
- Vol. 13 (2) , 208-214
Open AccessStudy of Increased Wind Noise by Active Noise Cancellation Headphones
In this paper, we investigated the cause of the increased wind noise by the active noise cancellation (ANC) headphones under windy conditions. Initially, we conducted experiments comparing both feedforward and feedback types of ANC under windy conditions. Subsequently, we formulated a hypothesis for the cause of amplified wind noise in ANC headphones as follows: The feedforward type ANC may introduce additional noise into the user’s eardrum when its microphone, used for feedforward control, captures low acoustic power sounds. To validate this hypothesis, we conducted experiments using reproduced wind noise sounds played using a speaker (high acoustic power) or an earphone (low acoustic power) with feedforward type ANC headphones. Our findings provide robust confirmation that the experimental results align with and support our proposed hypothesis.