PWPeng Wen

Peng Wen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Peng Wen has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Earmuff performance in the presence of high-level impulse from a recoilless weapon firing in a confined space

    by Zhiyu Li, Gang Tao, Peng Wen

    A noise attenuation performance test was conducted on earmuffs using a recoilless weapon launch platform in a confined space, along with two acoustic test fixtures (ATFs). The overpressure at the ATF's effective tympanic membrane comprised direct sound at 185 dB sound pressure level (SPL) and reflected sound at 179 dB SPL. Wearing earmuffs reduced these peaks to 162 dB SPL and 169 dB SPL, respectively. The reflected sound from walls was defined as delayed sound. An analytical model for earmuff noise attenuation simulated their effectiveness. The simulation revealed that when the earmuffs attenuated delayed sound, the acoustic impedance of acoustic leakage and the acoustic impedance of the earmuff material decreased by 96% and 50%, respectively. The negative overpressure zone between direct and delayed sound decreased the earmuffs' fit against the ATF. Additionally, the enclosed volume between the earmuff and the ear canal decreased by 12%. After the installation of bandages on the earmuffs, the overpressure peak of delayed sound was reduced by 5 dB. Furthermore, the acoustic impedance of the earmuff's sound leakage path and the acoustic impedance of the earmuff material deformation path increased by 100% and 809%, respectively.


  • Open Access

    High plateau drift characteristics of spin-stabilized projectile from individual recoilless rifle with rifling

    by Feng Ding, Gang Tao, Peng Wen

    Accurately predicting the drift of spinning projectiles in the highland region has always been a challenging task. The study combines genetic algorithm, modified mass ballistic model, and data from ballistic tests to establish a computational model of projectile plateau drift, which is able to compute the value of projectile drift accurately. The reliability of the model was verified by the tests. The study also explains the reasons for the formation of projectile drift and the characteristics of plateau drift through theory. The results of the study proved that under the same range, the projectile's yaw of repose angle is larger in the plateau region, but its projectile plateau drift is smaller mainly because the flight time of the projectile on the highland is smaller than that on the plains. The results of the study are of great significance for the precision strike of projectiles in the highland area.

  • Molecular dynamics study of the effect of temperature on the shock response and plastic deformation mechanism of CoCrFeMnNi high-entropy alloys

    by Wen Peng, Tao Gang

    High-entropy alloys have broad application prospects in aviation,aerospace,military and other fields due to their excellent mechanical properties.Temperature is an important external factor affecting the shock response of high-entropy alloys.Molecular dynamics methods are used to investigate the effect of temperature on the shock response and plastic deformation mechanisms of CoCrFeMnNi high-entropy alloys.The effects of temperature on the atomic volume and the radial distribution function of CoCrFeMnNi high-entropy alloys are studied.Then,the piston method is used to generate shock waves in the sample to research the shock response of CoCrFeMnNi high-entropy alloys.The polyhedral template matching method is used to observe the evolution of atomic-scale defects during the shock compression.The results show that the shock pressure,the shock wave propagation velocity,and the shock-induced temperature rise decrease with the increase of the initial temperature.For example,when piston velocity Up=1.5 km/s,the shock pressure at an initial temperature of 1000 K decreased by 6.7% compared to that at 1 K.Moreover,the shock Hugoniot elastic limit decrease linearly with the increase of temperature.The Hugoniot Up- Us curve of CoCrFeMnNi HEA in the plastic stage can be linearly fitted by the formula Us=c0+sUp.c0 decreases with increasing temperature.With increasing shock intensities,CoCrFeMnNi high-entropy alloys undergo complex plastic deformation,including dislocation slip,phase transformation,deformation twinning,and shock-induced amorphization.At relatively high initial temperature,disordered clusters appear inside CoCrFeMnNi HEA,which together with the BCC structure transformed from FCC and disordered structure are significant dislocation nucleation sources.Compared with other elements,Mn element has the largest proportion (25.4%) in disordered clusters.Due to the large atomic volume and potential energy,large lattice distortion and local stress occur around the Mn-rich element,which provides dominant contribution to shock-induced plastic deformation.At high temperatures,the contribution of Fe element to plastic deformation is as important as that of Mn element.The research results contribute to a deep understanding of the shock-induced plasticity and deformation mechanisms of CoCrFeMnNi high-entropy alloys.

  • Top Cited Papers

    Molecular dynamics simulation of the shock response of materials: A tutorial

    by Peng Wen, Gang Tao, Douglas E. Spearot, Simon R. Phillpot

    The aim of this Tutorial is to help new researchers understand how to perform molecular dynamics (MD) simulations of the shock response of materials and to provide a brief discussion of how MD can provide important insights into issues in the shock physics of crystalline and amorphous materials. Two distinct approaches for generating shock waves are reviewed. Non-equilibrium MD simulations generate a shock front, usually moving along one axis of the sample, with the processes associated with shock wave propagation monitored throughout the simulation. Equilibrium MD simulations characterize the equilibrated state of a shocked material behind the shock wave front, without explicit consideration of the dynamics of wave propagation. Ultimately, using either method, and by using analysis techniques capable of extracting thermodynamic information and identifying defects, MD simulations can provide a powerful mechanistic understanding of shock that complements shock experiments.


  • Molecular dynamics study of temperature effects on shock response and plastic deformation mechanism of CoCrFeMnNi high-entropy alloys

    by Peng Wen, Gang Tao

    High-entropy alloys have broad application prospects in aviation, aerospace, military and other fields due to their excellent mechanical properties. Temperature is an important external factor affecting the shock response of high-entropy alloys. In this paper, we investigate the effects of temperature on the shock response and plastic deformation mechanism of CoCrFeMnNi high-entropy alloys by using molecular dynamics method. The effects of temperature on the atomic volume and the radial distribution function of CoCrFeMnNi high-entropy alloy are studied. Then, the piston method is used to generate shock waves in the sample to study the shock response of CoCrFeMnNi high-entropy alloy. We observe the evolution of atomic-scale defects during the shock compression by the polyhedral template matching method. The results show that the shock pressure, the shock wave propagation velocity, and the rising of shock-induced temperature all decrease with the initial temperature increasing. For example, when piston velocity Up = 1.5 km/s, the shock pressure at an initial temperature of 1000 K decreases by 6.7% in comparison with that at 1 K. Moreover, the shock Hugoniot elastic limit decreases linearly with the increase of temperature. The Hugoniot Up-Us curve of CoCrFeMnNi HEA in the plastic stage can be linearly fitted by the formula Us = c0 + sUp, where c0 decreases with temperature increasing. As the shock intensity increases, the CoCrFeMnNi high-entropy alloy undergoes complex plastic deformation, including dislocation slip, phase transformation, deformation twinning, and shock-induced amorphization. At relatively high initial temperature, disordered clusters appear inside CoCrFeMnNi HEA, which together with the BCC (body-centered cubic) structure transformed from FCC (face-centered cubic) and disordered structure are significant dislocation nucleation sources. Compared with other elements, Mn element accounts for the largest proportion (25.4%) in disordered cluster. Owing to the large atomic volume and potential energy, large lattice distortion and local stress occur around the Mn-rich element, which makes a dominant contribution to shock-induced plastic deformation. At high temperatures, the contribution of Fe element to plastic deformation is as important as that of Mn element. The research results are conducive to understanding the shock-induced plasticity and deformation mechanisms of CoCrFeMnNi high-entropy alloys in depth.


  • Effect of the initial temperature on the shock response of Cu50Zr50 bulk metallic glass by molecular dynamics simulation

    by Peng Wen, Brian Demaske, Douglas E. Spearot, Simon R. Phillpot, Gang Tao

    The effect of initial temperature on the shock response of Cu50Zr50 bulk metallic glass (BMG) is investigated by molecular dynamics simulations using the multiscale shock technique. The shock Hugoniot relationship of Cu50Zr50 BMG shows an obvious temperature dependence. At the Hugoniot elastic limit (HEL), the critical shear stress decreases with increasing initial temperature; this is modeled based on the activation of shear transformation zones. Shock at high temperatures shows a pressure-dependent HEL. The deformation map reveals that there are three deformation regimes under different shock intensities and temperatures: elastic, plastic, and shock-induced melting. The flow stress decreases with increasing initial temperature confirming that high temperatures reduce the shear resistance of the Cu50Zr50 BMG. At high temperatures and pressures, a shock-induced melting regime is identified using a diffusivity-based analysis.


  • Open Access

    Void collapse and subsequent spallation in Cu50Zr50 metallic glass under shock loading by molecular dynamics simulations

    by Peng Wen, Brian Demaske, Simon R. Phillpot, Douglas E. Spearot, Gang Tao, Shuqiang Yuan

    Void evolution at the microscopic scale is an important part of the shock response of porous metallic glasses (MGs). Here, large-scale molecular dynamics simulations are used to investigate the shock loading of Cu50Zr50 MG, including thermodynamic quantities, shock-induced void collapse, and spall behavior. The results show that the shear transformation zone nucleation and growth around the void is the main plastic deformation mechanism for the shock-induced void collapse in MGs. The stress around the void is analyzed to reveal the evolution of the void shape and the relationship between the critical stress for the void collapse and the Hugoniot elastic limit stress. A model is proposed to predict the void collapse time in MGs. Softening occurs at around the location of the void after the void collapse due to a local temperature increase. Consequently, spallation is colocated with the high temperature region, rather than at the position associated with maximum tensile stress. Void growth and nucleation of tension transformation zones compete with each other as the shock intensity increases. At a high strain rate, the Cu50Zr50 MG shows more brittle fracture behavior with a larger number of voids and smaller average void size.


  • Atomic-level deformation of CuxZr100-x metallic glasses under shock loading

    by Brian J. Demaske, Simon R. Phillpot, Douglas E. Spearot, Peng Wen

    Plastic deformation mechanisms in CuxZr100-x bulk metallic glasses (MGs) subjected to shock are investigated using molecular dynamics simulations. MGs with Cu compositions between 30 and 70 at. % subjected to shock waves generated via piston velocities that range from 0.125 to 2.0 km/s are considered. In agreement with prior studies, plastic deformation is initiated via formation of localized regions of high von Mises shear strain, known as shear transformation zones (STZs). At low impact velocities, but above the Hugoniot elastic limit, STZ nucleation is dispersed behind the shock front. As impact velocity is increased, STZ nucleation becomes more homogeneous, eventually leading to shock-induced melting, which is identified in this work via high atomic diffusivity. The shear stress necessary to initiate plastic deformation within the shock front is independent of composition at shock intensities near the elastic limit but increases with increasing Cu content at high shock intensities. By contrast, both the flow stress in the plastically deformed MG and the critical shock pressure associated with melting behind the shock front are found to increase with increasing Cu content over the entire range of impact velocities. The evolution of the short-range order in the MG samples during shock wave propagation is analyzed using a polydisperse Voronoi tessellation method. Cu-centered polyhedra with full icosahedral symmetry are found to be most resistant to change under shock loading independent of the MG composition. A saturation is observed in the involvement of select Cu-centered polyhedra in the plastic deformation processes at a piston velocity around 0.75 km/s.


  • Open Access

    Analysis of the formation mechanism of the slug and jet center hole of axisymmetric shaped charges

    by Ren Baoxiang, Tao Gang, Wen Peng, Du Changxing, Pang Chunqiao, Meng Hongbo