SHSerhii Homeniuk

Serhii Homeniuk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Serhii Homeniuk has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    HOMOGENIZATION OF A TRANSTROPIC COMPOSITE WITH RANDOM PARAMETERS OF A HOLLOW FIBER

    by O. H. Spytsia, S. I. Homeniuk, O. V. Kudin, A. V. Stoliarova, О. Г. Спиця, С. І. Гоменюк

    When designing structures made of composite materials, a composite model is used in practice as a continuous homogeneous medium. Its physical and mechanical properties as a homogeneous material reflect the effective constants. Of course, the parameters of the components of the composite are random variables. Therefore, its effective constants are also random variables.In this regard, the actual task is to homogenize the composite taking into account the stochasticity of its parameters, including the determination of the characteristics of elastic constants as random variables.In the work, the object of research is a unidirectional fiber composite, the phases of which are a transversal-isotropic matrix and hollow fiber. The radius of the fiber and the cavity in it are modeled as random variables with a normal distribution law. Accordingly, the effective parameters of the composite are also random variables. The method of determining the mathematical expectation of an effective longitudinal modulus of elasticity, which can be used to find other numerical characteristics of effective parameters as functions of random variables, is proposed.To solve the homogenization problem, the composite is modeled by a continuous homogeneous transversal-isotropic material. The conditions of perfect bonding are fulfilled at the contact surface between the matrix and the fiber. As result of the research, a formula was obtained for the effective longitudinal modulus of elasticity as a function of random variables. The volume fractions of the fiber and the cavity in the fiber for the composite are random. The distribution densities of these random variables are found. The elastic constants of the fiber and matrix are considered as deterministic variables. The obtained expression of the effective longitudinal modulus of elasticity as a function of random variables allowed us to determine its characteristics – mathematical expectation and variance. The obtained distribution densities of random arguments can be used to determine other moments of this random variable.The proposed method can be used to solve the problem of homogenization of composites, the phases of which have random characteristics with other continuous distributions different from the normal one. Під час проєктування конструкцій з композитних матеріалів на практиці використовують модель композита у вигляді суцільного однорідного середовища. Фізико-механічні його властивості як однорідного матеріалу відображають ефективні сталі. Звичайно, параметри складових частин компонентів композита є випадковими величинами. Тому його ефективні сталі теж є випадковими величинами. У зв’язку з цим актуальною задачею є гомогенізація композита з урахуванням стохастичності його параметрів, у тому числі визначення характеристик пружних сталих як випадкових величин.У роботі об’єктом дослідження є односпрямований волокнистий композит, фазами якого є трансверсально-ізотропні матриця та порожнисте волокно.Радіус волокна та порожнини у ньому моделюються випадковими величинами, що мають нормальний закон розподілу. Відповідно, ефективні параметри композита також є випадковими величинами. Запропоновано методику визначення математичного сподівання ефективного поздовжнього модуля пружності, яку можна застосувати для знаходження інших числових характеристик ефективних параметрів як функцій випадкових величин.Для розв’язання задачі гомогенізації композит моделюється суцільним однорідним трансверсально-ізотропним матеріалом. На поверхні контакту між матрицею та волокном виконуються умови ідеального з’єднання. У результаті виконаного дослідження отримано формулу для ефективного поздовжнього модуля пружності як функції випадкових величин. Випадковими є об’ємні частки волокна та порожнини у волокні для композита. Знайдено щільності розподілу цих випадкових величин. Пружні сталі волокна та матриці розглядаються як детерміновані величини. Отриманий вираз ефективного поздовжнього модуля пружності у вигляді функції випадкових величин дозволив визначити його характеристики – математичне сподівання та дисперсії. Отримані щільності розподілу випадкових аргументів можна застосувати для визначення інших моментів цієї випадкової величини. Запропоновану методику можна застосувати для...

  • Open Access

    WEB IMPLEMENTATION THE POSTPROCESSOR WITH AN OPEN-SOURCE CODE

    by S. I. Homeniuk, S. M. Grebenyuk, Y. V. Panasenko, С. І. Гоменюк

    The paper considers one of the most promising areas for increasing the efficiency of designing modern equipment, namely, creating a tool for conducting a virtual computer experiment instead of full-scale tests, which significantly speeds up and reduces the cost of the development process, as well as ensuring its greater safety.Most often in practice, the numerical finite element method is used for computer modeling of a wide range of problems. Its application requires the availability of specialized software – finite element analysis systems, which can be conditionally divided into three main subsystems: 1) preprocessor (data preparation for calculation),2) processor (calculation implementation) and 3) postprocessor (results analysis).Practical experience shows that the stage of results analysis (postprocessing) in terms of its complexity and duration can significantly exceed the two previous stages of numerical modeling. That is why the efficiency of automated design in mechanical engineering and construction directly depends on the quality of the implementation of the postprocessor and the convenience of its use by the user.The vast majority of modern postprocessors are integral components of the corresponding finite element analysis systems (for example, Ansys, MSC Nastran, COMSOL, etc.). This actually makes it impossible to use them together with third- party systems focused on solving certain narrow classes of problems (for example, composite mechanics). In addition, cloud technologies have been developing rapidly recently, which requires the creation of appropriate software, the implementation of which in the form of web applications will allow achieving real cross platform, since modern browsers are actually hardware-independent virtual machines that run on almost all types of modern computer technology. That is why the development of separate software systems for automating post-analysis of the results of numerical calculations obtained in various numerical modeling systems in the form of open-source web applications is currently an urgent task. У роботі розглядається один із найбільш перспективних напрямів підвищення ефективності проєктування сучасної техніки, а саме створення інструменту для проведення віртуального комп’ютерного експерименту замість натурних випробувань, завдяки чому істотно пришвидшується й здешевлюється процес розробки, а також забезпечується його більша безпечність.Найчастіше на практиці для комп’ютерного моделювання широкого кола проблем використовується чисельний метод – метод скінченних елементів.Його застосування потребує наявності спеціалізованого програмного забезпечення – систем скінченно-елементного аналізу, які можуть бути умовно поділені на три основні підсистеми: 1) препроцесор (підготовка даних для розрахунку), 2) процесор (реалізація розрахунку) і 3) постпроцесор (аналіз результатів).Практичний досвід показує, що стадія аналізу результатів (постобробка) за своєю складністю та тривалістю може значно перевищувати два попередні етапи чисельного моделювання. Саме тому від якості реалізації постпроцесора та зручності його використання користувачем напряму залежить ефективність автоматизованого проєктування в машинобудуванні та будівництві.Переважна більшість сучасних постпроцесорів є невід’ємними складовими відповідних систем скінченно-елементного аналізу (наприклад, Ansys, MSC Nastran, COMSOL та ін.). Це фактично робить неможливим їх використання спільно зі сторонніми системами, орієнтованими на розв’язання певних вузьких класів задач, наприклад механіки композитів. Крім того, останнім часом швидкими темпами розвиваються хмарні технології, що потребує створення відповідного програмного забезпечення, реалізація якого у вигляді вебзастосунків дасть можливість досягти реальної багатоплатформності, оскільки сучасні браузери фактично є апаратно незалежними віртуальними машинами, що працюють майже на всіх типах сучасної комп’ютерної техніки. З огляду на це розробка відокремлених програмних систем для автоматизації постаналізу результатів чисельних розрахунків, отриманих у різних системах чисельного моделювання, у вигляді вебзастосунків з відкритим початковим кодом на сьогодні є...


  • FEATURES OF THE USE OF PARALLEL CALCULATIONS IN THE PACKAGE OF APPLICATION PROGRAMS «MIRELA+»

    by Serhii Homeniuk, Zaporizhzhia National University, Vladyslav Kozub, Luhansk Taras Shevchenko National University

    The article examines approaches to the optimization of structural calculations, which require a comprehensive analysis of deformation processes under the action of operational loads. The finite element method is usually used to solve such problems. Modeling of structures taking into account stress concentrators requires the use of large-sized calculation grids. In real operating conditions, most structural elements are under the influence of mechanical and thermal loads. The package of application programs «MIRELA+» is intended for solving problems of thermoelasticity of structures made of weakly compressible elastomers and composites with an elastomeric matrix. One of the stages of solving problems of thermoelasticity is the formation of stiffness matrices taking into account weak compressibility and thermal conductivity of finite elements. When forming the stiffness and thermal conductivity matrices, it is necessary to perform integration over the area of ​​the finite element. For elements of the same type, calculations are used according to the same procedure, and the number of such calculations determines the time to solve the problem. In the traditional approach, these calculations are performed sequentially. In the case of large grid sizes, the number and time of calculations increase, which requires optimization of calculations using parallel calculation algorithms. Using the OpenMP library, a parallel algorithm for forming the matrix of solving equations was built. The calculation of terms according to the quadrature scheme is included in the parallel area of ​​the algorithm. Filling of the stiffness matrix of the finite element takes place in the sequential region. The execution time of parallel calculations is determined by the slowest subtask. Using the moment scheme of finite elements, displacement and deformation are approximated by the same polynomials, which simplifies the calculation of integrals. Parallel programming algorithms for constructing solving equations of the “MIRELA+” program package have been developed. Solutions for calculation grids of different sizes have been obtained. The effect of parallelization on the calculation time was studied.

  • Open Access

    ALGORITHM OF PARALLEL CALCULATIONS IN THE FINITE ELEMENT METHOD

    by S. I. Homeniuk, V. Yu. Kozub, С. І. Гоменюк

    Розв’язання прикладних задач фізики та механіки конструкцій потребує використання методу скінченних елементів з великою розмірністю розрахункових сіток. Крім того, в таких схемах одночасно використовуються різні типи скінченних елементів. Формування матриць жорсткості в такому випадку потребує значних обчислень за однаковою схемою для кожного скінченного елементу. У традиційному підході ці обчислення виконуються послідовно. Для розрахункових схем досить невеликого розміру, час розв’язування є незначним. У випадку великих розмірів сіток кількість та час розрахунків збільшуються, що потребує оптимізації обчислень з використанням алгоритмів паралельних обчислень. Для паралелізації методу скінченних елементів реалізовано управління роботою досить великої кількості процесів, організовано обмін даними між процесами. Під час виконання обрахунків виникає необхідність очікування моменту, коли завершиться виконання деякого етапу всіма процесорами. Час виконання програми визначається найповільнішою задачею з тих, що паралельно виконуються на різних процесорах. Для досягнення збалансування завантаження процесорів реалізовано рівномірний розподіл однаково вимірних задач. У системі із загальною пам’яттю, в яких обмін інформацією між процесорами відбувається за допомогою змінних, що зберігаються у загальній пам’яті, для забезпечення детермінованості виконання програми реалізовано поступове розпаралелювання програми. Для оптимізації обчислювальних процесів скінченних елементів обчислювального комплексу «МІРЕЛА+» розроблено алгоритми паралельного програмування для побудови матриць жорсткості скінченних елементів та розрахунку напружено-деформованого стану. Паралельна обробка даних реалізована за допомогою бібліотеки OpenMP, що забезпечує більшу швидкість розробки через зручність використання. На основі обчислювальних експериментів встановлено перевагу використання алгоритмів паралельних обчислень на початку розв’язування задач перед традиційними скінченно-елементними алгоритмами для великорозмірних розрахункових сіток. The solution of applied problems of physics and mechanics of structures requires the use of the finite element method with a large dimension of calculation grids. In addition, different types of finite elements are used simultaneously in such schemes. The formation of stiffness matrices in this case requires significant calculations using the same scheme for each finite element. In the traditional approach, these calculations are performed sequentially. For computational schemes of sufficiently small size, the solution time is negligible. In the case of large grid sizes, the number and time of calculations increase, which requires optimization of calculations using parallel calculation algorithms. For the parallelization of the finite element method, work management of a sufficiently large number of processes is implemented, and data exchange between processes is organized. When performing calculations, there is a need to wait for the moment when the execution of a certain stage by all processors is completed. The execution time of the program is determined by the slowest task among those executed in parallel on different processors. In order to achieve load balancing of the processors, a separation of equally sized tasks is implemented. In a system with shared memory, in which the exchange of information between processors takes place with the help of variables stored in the shared memory, gradual parallelization of the program is implemented to ensure determinism of program execution. In order to optimize the computing processes of the finite elements of the “MIRELA +” computing complex, parallel programming algorithms have been developed to construct the stiffness matrices of the finite elements and calculate the stress-strain state. Parallel data processing is implemented using the OpenMP library, which provides faster development due to ease of use. On the basis of computational experiments, the advantage of using parallel computing algorithms at the beginning of problem solving over traditional finite element algorithms for large-scale valculation grids has been established.

  • Open Access

    Development of a method for triangulation of inhomogeneous regions represented by functions

    by Serhii Choporov, Serhii Homeniuk, Sergii Grebenyuk, Oleksii Kudin

    Development of a method for triangulation of inhomogeneous regions represented by functions

  • Open Access

    Determining the effective characteristics of a composite with hollow fiber at longitudinal elongation

    by Serhii Homeniuk, Sergii Grebenyuk, Mykhailo Klimenko, Anastasia Stoliarova

    Determining the effective characteristics of a composite with hollow fiber at longitudinal elongation


  • Open Access

    Optimized smoothing of discrete models of the implicitly defined geometrical objects' surfaces

    by Serhii Choporov, Serhii Homeniuk, Sergii Grebenyuk

    When using many modern methods of automatic generation of surface meshes of implicitly defined geometric objects, the accuracy of approximation in the vicinity of surface singularities (holes, breaks, etc.) is lost. To improve surface meshes of geometric objects, various methods of smoothing are used. The existing smoothing methods are focused on triangular elements, but optimization of surface meshes of geometric objects on the basis of elements of another shape (for example, quadrangles) is less studied.The paper proposes the mathematical apparatus based on the use of the energy functional for each model node. The proposed functional considers the distance from the current node to the adjacent nodes and the distance from the geometric centers of the incident elements to the surface.The algorithm for minimizing the energy functional for smoothing surface meshes of implicitly defined geometric objects is developed. The developed algorithm is a modification of the Gaussian method for the case of search for a minimum in the local coordinates of a polygon formed by neighboring elements. The algorithm is local: minimization is performed consistently for each model node, so its repeated application provides models with more accurate approximation of the boundary.The developed algorithm for minimizing the functional does not require the insertion of new nodes. As a consequence, it is possible, using a single procedure, to optimize meshes based on triangles, quadrangles or mixed type (containing triangles and quadrangles simultaneously). As a result, the accuracy of the approximation of surfaces in the vicinity of their singularities increases, as demonstrated by the examples of smoothing models of complex objects.