Luiz Borro
Research Subjects
Luiz Borro has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
- Goran Neshich
Computational Biology Research Group, Embrapa Digital Agriculture, Av. André Tosello 209, Campinas, São Paulo 13083-886, Brazil
5 shared publications Fabian Villalta-Romero
Chemical Biology Laboratory, Organic Chemistry Department, Institute of Chemistry, University of Campinas (Unicamp), Campinas, SP, Brazil; Centro de Investigación en Biotecnología, Escuela de Biología, Instituto Tecnológico de Costa Rica, Costa Rica
3 shared publications- Fábio Rogério de Moraes
Multiuser Center for Biomolecular Innovation, Department of Physics, Institute of Biosciences, Languages and Exact Sciences, Sao Paulo State University (UNESP), Sao Jose do Rio Preto, SP, Brazil
3 shared publications Goran Neshich
Computational Biology Research Group, National Center for Agricultural Informatics, Brazilian Agricultural Research Corporation (EMBRAPA), Campinas, SP, Brazil
3 shared publicationsIvan Mazoni
Embrapa Agricultural Informatics, Campinas, São Paulo, Brazil
3 shared publications- Ljubica Tasic
Universidade Estadual de Campinas (UNICAMP)
3 shared publications
Latest Publications
- 1 June 2025
- Published by Bentham Science Publishers Ltd. in Current Nanomedicine
- Vol. 15 (3) , 267-285
Comprehensive Analysis of the Distinct Nano Environments Characteristics Containing the Different Secondary Structure Elements: α-Helices, β-Sheets, and Turns
Background: This work is the third part of our initiative to fully describe the internal protein nano environments (NEs) for the three existing types of secondary structure elements (SSE). In our previous work, the NE of both the α-helix and the β-sheet were analyzed. The focus of this and previous research is improving our understanding of the SSEs: α-helices, β-sheets and turns, within protein structures. We found that the structural similarities between turns and α-helices are very high and turns may be considered as the “incomplete” initiation of α-helices. The knowledge we were able to compile during this work might be essential for predicting a tertiary structure of proteins, with higher precision and subsequently being in a more favourable position with regard to designing drugs for certain protein structure/function related diseases. Considering that the formation of secondary structure elements is a crucial step in the general folding of protein 3D structure, an important contribution of this work is augmenting the efficiency of estimating if modelled structures, for example, are predicting SSEs in full agreement to necessary/required/ sufficient values of respective SSEs nanoenvironment descriptors. During exactly that modelling phase, preceding the more precise final 3D protein structure construction, our Dictionary of Most Relevant Nanoenvironment Descriptors is able to answer some fundamental questions regarding SSE correctness with regard to nanoenvironment characteristics found to be generally required. Expanding this vision, our current work is part of an effort by our laboratory to create a “dictionary of internal protein nanoenvironments” - DIPN. The ten most studied internal protein nanoenvironments are described in DIPN in physicochemical and structural terms, and this knowledge is now available to be used to aid drug design - probably the most important area of application for the results we are presenting here. Methods: In the current paper, STING´s database of physical-chemical and structural descriptors was used to gather the necessary information to characterize the NE of loops, or, as they are often called, turns. Given that approximately 20% of all protein-type residues form turns, research in this field is essential, and analysis of the obtained results will further contribute to our comprehension of how proteins fold. In addition, the results in this paper will contribute to the better training of algorithms that evaluate the degree of overall protein structure quality and, consequently, structure prediction. This is currently very important given we are witnessing a revolution in algorithms employing artificial intelligence for protein structure prediction. Powered by the STING’s database (wide-ranging protein structure information source), statistical testing was used to retrieve a set of descriptors that fully delineate the NE of turns. By collecting such data, it is then possible to list the variances with respect to the NE of α-helices and β-sheets and, by doing so, establish the most relevant NE descriptors (MRND) for each of the three SSEs. Results: The results show that the α-helical and β-sheet Nes, as well as the amino acid residue composition, all behave in a similar fashion as a “key and lock” system. In other words, it is necessary for a set of specific descriptors to assume respective specific values (within the bounds of a very definite value region) to construct the specific secondary structure element NE at a certain protein location. Conclusion: Consequently, there is a set of descriptors that act together and are required to satisfy specific conditions for secondary structure element occurrences. The very same requirement, we found, occurs in the case of turns.
- 1 June 2025
- Published by Bentham Science Publishers Ltd. in Current Nanomedicine
- Vol. 15 (3) , 267-285
Comprehensive Analysis of the Distinct Nano Environments Characteristics Containing the Different Secondary Structure Elements: α-Helices, β-Sheets, and Turns
Background: This work is the third part of our initiative to fully describe the internal protein nano environments (NEs) for the three existing types of secondary structure elements (SSE). In our previous work, the NE of both the α-helix and the β-sheet were analyzed. The focus of this and previous research is improving our understanding of the SSEs: α-helices, β-sheets and turns, within protein structures. We found that the structural similarities between turns and α-helices are very high and turns may be considered as the “incomplete” initiation of α-helices. The knowledge we were able to compile during this work might be essential for predicting a tertiary structure of proteins, with higher precision and subsequently being in a more favourable position with regard to designing drugs for certain protein structure/function related diseases. Considering that the formation of secondary structure elements is a crucial step in the general folding of protein 3D structure, an important contribution of this work is augmenting the efficiency of estimating if modelled structures, for example, are predicting SSEs in full agreement to necessary/required/ sufficient values of respective SSEs nanoenvironment descriptors. During exactly that modelling phase, preceding the more precise final 3D protein structure construction, our Dictionary of Most Relevant Nanoenvironment Descriptors is able to answer some fundamental questions regarding SSE correctness with regard to nanoenvironment characteristics found to be generally required. Expanding this vision, our current work is part of an effort by our laboratory to create a “dictionary of internal protein nanoenvironments” - DIPN. The ten most studied internal protein nanoenvironments are described in DIPN in physicochemical and structural terms, and this knowledge is now available to be used to aid drug design - probably the most important area of application for the results we are presenting here. Methods: In the current paper, STING´s database of physical-chemical and structural descriptors was used to gather the necessary information to characterize the NE of loops, or, as they are often called, turns. Given that approximately 20% of all protein-type residues form turns, research in this field is essential, and analysis of the obtained results will further contribute to our comprehension of how proteins fold. In addition, the results in this paper will contribute to the better training of algorithms that evaluate the degree of overall protein structure quality and, consequently, structure prediction. This is currently very important given we are witnessing a revolution in algorithms employing artificial intelligence for protein structure prediction. Powered by the STING’s database (wide-ranging protein structure information source), statistical testing was used to retrieve a set of descriptors that fully delineate the NE of turns. By collecting such data, it is then possible to list the variances with respect to the NE of α-helices and β-sheets and, by doing so, establish the most relevant NE descriptors (MRND) for each of the three SSEs. Results: The results show that the α-helical and β-sheet Nes, as well as the amino acid residue composition, all behave in a similar fashion as a “key and lock” system. In other words, it is necessary for a set of specific descriptors to assume respective specific values (within the bounds of a very definite value region) to construct the specific secondary structure element NE at a certain protein location. Conclusion: Consequently, there is a set of descriptors that act together and are required to satisfy specific conditions for secondary structure element occurrences. The very same requirement, we found, occurs in the case of turns.
- Open Access
- 29 March 2025
- Published by Oxford University Press (OUP) in NAR Genomics and Bioinformatics
- Vol. 7 (2) , lqaf054
Learning to utilize internal protein 3D nanoenvironment descriptors in predicting CRISPR–Cas9 off-target activity
Despite advances in determining the factors influencing cleavage activity of a CRISPR–Cas9 single guide RNA (sgRNA) at an (off-)target DNA sequence, a comprehensive assessment of pertinent physico-chemical/structural descriptors is missing. In particular, studies have not yet directly exploited the information-rich internal protein 3D nanoenvironment of the sgRNA–(off-)target strand DNA pair, which we obtain by harvesting 634 980 residue-level features for CRISPR–Cas9 complexes. As a proof-of-concept study, we simulated the internal protein 3D nanoenvironment for all experimentally available single-base protospacer-adjacent motif-distal mutations for a given sgRNA–target strand pair. By determining the most relevant residue-level features for CRISPR–Cas9 off-target cleavage activity, we developed STING_CRISPR, a machine learning model delivering accurate predictive performance of off-target cleavage activity for the type of single-base mutations considered in this study. By interpreting STING_CRISPR, we identified four important Cas9 residue spatial hotspots and associated structural/physico-chemical descriptor classes influencing CRISPR–Cas9 (off-)target cleavage activity for the sgRNA–target strand pairs covered in this study.
- 29 March 2025
- Published by Oxford University Press (OUP) in NAR Genomics and Bioinformatics
- Vol. 7 (2) , lqaf054
Open AccessLearning to utilize internal protein 3D nanoenvironment descriptors in predicting CRISPR–Cas9 off-target activity
Despite advances in determining the factors influencing cleavage activity of a CRISPR–Cas9 single guide RNA (sgRNA) at an (off-)target DNA sequence, a comprehensive assessment of pertinent physico-chemical/structural descriptors is missing. In particular, studies have not yet directly exploited the information-rich internal protein 3D nanoenvironment of the sgRNA–(off-)target strand DNA pair, which we obtain by harvesting 634 980 residue-level features for CRISPR–Cas9 complexes. As a proof-of-concept study, we simulated the internal protein 3D nanoenvironment for all experimentally available single-base protospacer-adjacent motif-distal mutations for a given sgRNA–target strand pair. By determining the most relevant residue-level features for CRISPR–Cas9 off-target cleavage activity, we developed STING_CRISPR, a machine learning model delivering accurate predictive performance of off-target cleavage activity for the type of single-base mutations considered in this study. By interpreting STING_CRISPR, we identified four important Cas9 residue spatial hotspots and associated structural/physico-chemical descriptor classes influencing CRISPR–Cas9 (off-)target cleavage activity for the sgRNA–target strand pairs covered in this study.
- Open Access
- 10 July 2018
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 13 (7) , e0200018
Study of specific nanoenvironments containing α-helices in all-α and (α+β)+(α/β) proteins
Protein secondary structure elements (PSSEs) such as α-helices, β-strands, and turns are the primary building blocks of the tertiary protein structure. Our primary interest here is to reveal the characteristics of the nanoenvironment formed by both PSSEs and their surrounding amino acid residues (AARs), which might contribute to the general understanding of how proteins fold. The characteristics of such nanoenvironments must be specific to each secondary structure element, and we have set our goal here to gather the fullest possible description of the α-helical nanoenvironment. In general, this postulate (the existence of specific nanoenvironments for specific protein substructures/neighbourhoods/regions with distinct functionality) was already successfully explored and confirmed for some protein regions, such as protein-protein interfaces and enzyme catalytic sites. Consequently, PSSEs were the obvious next choice for additional work for further evidence showing that specific nanoenvironments (having characteristics fully describable by means of structural and physical chemical descriptors) do exist for the corresponding and determined intraprotein regions. The nanoenvironment of α-helices (nEoαH) is defined as any region of the protein where this secondary structure element type is detected. The nEoαH, therefore, includes not only the α-helix amino acid residues but also the residues immediately around the α-helix. The hypothesis that motivated this work is that it might in fact be possible to detect a postulated “signal” or “signature” that distinguishes the specific location of α-helices. This “signal” must be discernible by tracking differences in the values of physical, chemical, physicochemical, structural and geometric descriptors immediately before (or after) the PSSE from those in the region along the α-helices. The search for this specific nanoenvironment “signal” was made possible by aligning previously selected α-helices of equal length. Afterward, we calculated the average value, standard deviation and mean square error at each aligned residue position for each selected descriptor. We applied Student’s t-test, the Kolmogorov-Smirnov test and MANOVA statistical tests to the dataset constructed as described above, and the results confirmed that the hypothesized “signal”/“signature” is both existing/identifiable and capable of distinguishing the presence of an α-helix inside the specific nanoenvironment, contextualized as a specific region within the whole protein. However, such conclusion might rarely be reached if only one descriptor is considered at a time. A more accurate signal with broader coverage is achieved only if one applies multivariate analysis, which means that several descriptors (usually approximately 10 descriptors) should be considered at the same time. To a limited extent (up to a maximum of 15% of cases), such conclusion is also possible with only a single descriptor, and the conclusion is also possible in general for up to 50–80% of cases when no less than 5 nonlinear descriptors are selected and considered. Using all the descriptors considered in this work, provided all assumptions about data characteristics for this analysis are met, multivariate analysis regularly reached a coverage and accuracy above 90%. Understanding how secondary structure elements are formed and maintained within a protein structure could enable a more detailed understanding of how proteins reach their final 3D structure and consequently, their function. Likewise, this knowledge may also improve the tools used to determine how good a structure is by means of comparing the “signal” around a selected PSSE with the one obtained from the best (resolution and quality wise) protein structures available.
- 10 July 2018
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 13 (7) , e0200018
Open AccessStudy of specific nanoenvironments containing α-helices in all-α and (α+β)+(α/β) proteins
Protein secondary structure elements (PSSEs) such as α-helices, β-strands, and turns are the primary building blocks of the tertiary protein structure. Our primary interest here is to reveal the characteristics of the nanoenvironment formed by both PSSEs and their surrounding amino acid residues (AARs), which might contribute to the general understanding of how proteins fold. The characteristics of such nanoenvironments must be specific to each secondary structure element, and we have set our goal here to gather the fullest possible description of the α-helical nanoenvironment. In general, this postulate (the existence of specific nanoenvironments for specific protein substructures/neighbourhoods/regions with distinct functionality) was already successfully explored and confirmed for some protein regions, such as protein-protein interfaces and enzyme catalytic sites. Consequently, PSSEs were the obvious next choice for additional work for further evidence showing that specific nanoenvironments (having characteristics fully describable by means of structural and physical chemical descriptors) do exist for the corresponding and determined intraprotein regions. The nanoenvironment of α-helices (nEoαH) is defined as any region of the protein where this secondary structure element type is detected. The nEoαH, therefore, includes not only the α-helix amino acid residues but also the residues immediately around the α-helix. The hypothesis that motivated this work is that it might in fact be possible to detect a postulated “signal” or “signature” that distinguishes the specific location of α-helices. This “signal” must be discernible by tracking differences in the values of physical, chemical, physicochemical, structural and geometric descriptors immediately before (or after) the PSSE from those in the region along the α-helices. The search for this specific nanoenvironment “signal” was made possible by aligning previously selected α-helices of equal length. Afterward, we calculated the average value, standard deviation and mean square error at each aligned residue position for each selected descriptor. We applied Student’s t-test, the Kolmogorov-Smirnov test and MANOVA statistical tests to the dataset constructed as described above, and the results confirmed that the hypothesized “signal”/“signature” is both existing/identifiable and capable of distinguishing the presence of an α-helix inside the specific nanoenvironment, contextualized as a specific region within the whole protein. However, such conclusion might rarely be reached if only one descriptor is considered at a time. A more accurate signal with broader coverage is achieved only if one applies multivariate analysis, which means that several descriptors (usually approximately 10 descriptors) should be considered at the same time. To a limited extent (up to a maximum of 15% of cases), such conclusion is also possible with only a single descriptor, and the conclusion is also possible in general for up to 50–80% of cases when no less than 5 nonlinear descriptors are selected and considered. Using all the descriptors considered in this work, provided all assumptions about data characteristics for this analysis are met, multivariate analysis regularly reached a coverage and accuracy above 90%. Understanding how secondary structure elements are formed and maintained within a protein structure could enable a more detailed understanding of how proteins reach their final 3D structure and consequently, their function. Likewise, this knowledge may also improve the tools used to determine how good a structure is by means of comparing the “signal” around a selected PSSE with the one obtained from the best (resolution and quality wise) protein structures available.
- Open Access
- 1 May 2017
- Published by Elsevier in Bioorganic & Medicinal Chemistry Letters
- Vol. 27 (9) , 2018-2022
Discovery of small molecule inhibitors for the snake venom metalloprotease BaP1 using in silico and in vitro tests
- 1 May 2017
- Published by Elsevier in Bioorganic & Medicinal Chemistry Letters
- Vol. 27 (9) , 2018-2022
Open AccessDiscovery of small molecule inhibitors for the snake venom metalloprotease BaP1 using in silico and in vitro tests
- Open Access
- 15 February 2016
- Published by Oxford University Press (OUP) in Bioinformatics
- Vol. 32 (12) , 1885-1887
Multiple structure single parameter: analysis of a single protein nano environment descriptor characterizing a shared loci on structurally aligned proteins
Motivation: A graphical representation of physicochemical and structural descriptors attributed to amino acid residues occupying the same topological position in different, structurally aligned proteins can provide a more intuitive way to associate possible functional implications to identified variations in structural characteristics. This could be achieved by observing selected characteristics of amino acids and of their corresponding nano environments, described by the numerical value of matching descriptor. For this purpose, a web-based tool called multiple structure single parameter (MSSP) was developed and here presented. Results: MSSP produces a two-dimensional plot of a single protein descriptor for a number of structurally aligned protein chains. From a total of 150 protein descriptors available in MSSP, selected of >1500 parameters stored in the STING database, it is possible to create easily readable and highly informative XY-plots, where X-axis contains the amino acid position in the multiple structural alignment, and Y-axis contains the descriptor’s numerical values for each aligned structure. To illustrate one of possible MSSP contributions to the investigation of changes in physicochemical and structural properties of mutants, comparing them with the cognate wild-type structure, the oncogenic mutation of M918T in RET kinase is presented. The comparative analysis of wild-type and mutant structures shows great changes in their electrostatic potential. These variations are easily depicted at the MSSP-generated XY-plot. Availability and Implementation: The web server is freely available at http://www.cbi.cnptia.embrapa.br/SMS/STINGm/MPA/index.html. Web server implemented in Perl, Java and JavaScript and JMol or Protein Viewer as structure visualizers. Contact:goran.neshich@embrapa.br or gneshich@gmail.com Supplementary information: Supplementary data are available at Bioinformatics online.
- 15 February 2016
- Published by Oxford University Press (OUP) in Bioinformatics
- Vol. 32 (12) , 1885-1887
Open AccessMultiple structure single parameter: analysis of a single protein nano environment descriptor characterizing a shared loci on structurally aligned proteins
Motivation: A graphical representation of physicochemical and structural descriptors attributed to amino acid residues occupying the same topological position in different, structurally aligned proteins can provide a more intuitive way to associate possible functional implications to identified variations in structural characteristics. This could be achieved by observing selected characteristics of amino acids and of their corresponding nano environments, described by the numerical value of matching descriptor. For this purpose, a web-based tool called multiple structure single parameter (MSSP) was developed and here presented. Results: MSSP produces a two-dimensional plot of a single protein descriptor for a number of structurally aligned protein chains. From a total of 150 protein descriptors available in MSSP, selected of >1500 parameters stored in the STING database, it is possible to create easily readable and highly informative XY-plots, where X-axis contains the amino acid position in the multiple structural alignment, and Y-axis contains the descriptor’s numerical values for each aligned structure. To illustrate one of possible MSSP contributions to the investigation of changes in physicochemical and structural properties of mutants, comparing them with the cognate wild-type structure, the oncogenic mutation of M918T in RET kinase is presented. The comparative analysis of wild-type and mutant structures shows great changes in their electrostatic potential. These variations are easily depicted at the MSSP-generated XY-plot. Availability and Implementation: The web server is freely available at http://www.cbi.cnptia.embrapa.br/SMS/STINGm/MPA/index.html. Web server implemented in Perl, Java and JavaScript and JMol or Protein Viewer as structure visualizers. Contact:goran.neshich@embrapa.br or gneshich@gmail.com Supplementary information: Supplementary data are available at Bioinformatics online.
- 28 August 2015
- Published by Bentham Science Publishers Ltd. in Current Protein & Peptide Science
- Vol. 16 (8) , 701-717
Computational Biology Tools for Identifying Specific Ligand Binding Residues for Novel Agrochemical and Drug Design
Abstract: The term “agrochemicals” is used in its generic form to represent a spectrum of pesticides, such as insecticides, fungicides or bactericides. They contain active components designed for optimized pest management and control, therefore allowing for economically sound and labor efficient agricultural production. A “drug” on the other side is a term that is used for compounds designed for controlling human diseases. Although drugs are subjected to much more severe testing and regulation procedures before reaching the market, they might contain exactly the same active ingredient as certain agrochemicals, what is the case described in present work, showing how a small chemical compound might be used to control pathogenicity of Gram negative bacteria Xylella fastidiosa which devastates citrus plantations, as well as for control of, for example, meningitis in humans. It is also clear that so far the production of new agrochemicals is not benefiting as much from the in silico new chemical compound identification/discovery as pharmaceutical production. Rational drug design crucially depends on detailed knowledge of structural information about the receptor (target protein) and the ligand (drug/agrochemical). The interaction between the two molecules is the subject of analysis that aims to understand relationship between structure and function, mainly deciphering some fundamental elements of the nanoenvironment where the interaction occurs. In this work we will emphasize the role of understanding nanoenvironmental factors that guide recognition and interaction of target protein and its function modifier, an agrochemical or a drug. The repertoire of nanoenvironment descriptors is used for two selected and specific cases we have approached in order to offer a technological solution for some very important problems that needs special attention in agriculture: elimination of pathogenicity of a bacterium which is attacking citrus plants and formulation of a new fungicide. Finally, we also briefly describe a workflow which might be useful when research requires that model structures of target proteins are firstly generated (starting from genome sequences), followed by identification of ligand-target sites at the surface of those modeled structures, then application of procedures that adequately prepare both protein and ligand structures (the latter also involving filtration that satisfies acceptable adsorption/desorption/metabolism/excretion/toxicity [ADMET] parameters) for virtual high throughput screening (involving docking of ligands to indicated sites) and terminating by ranking of best pairs: target protein with selected ligand.
- 28 August 2015
- Published by Bentham Science Publishers Ltd. in Current Protein & Peptide Science
- Vol. 16 (8) , 701-717
Computational Biology Tools for Identifying Specific Ligand Binding Residues for Novel Agrochemical and Drug Design
Abstract: The term “agrochemicals” is used in its generic form to represent a spectrum of pesticides, such as insecticides, fungicides or bactericides. They contain active components designed for optimized pest management and control, therefore allowing for economically sound and labor efficient agricultural production. A “drug” on the other side is a term that is used for compounds designed for controlling human diseases. Although drugs are subjected to much more severe testing and regulation procedures before reaching the market, they might contain exactly the same active ingredient as certain agrochemicals, what is the case described in present work, showing how a small chemical compound might be used to control pathogenicity of Gram negative bacteria Xylella fastidiosa which devastates citrus plantations, as well as for control of, for example, meningitis in humans. It is also clear that so far the production of new agrochemicals is not benefiting as much from the in silico new chemical compound identification/discovery as pharmaceutical production. Rational drug design crucially depends on detailed knowledge of structural information about the receptor (target protein) and the ligand (drug/agrochemical). The interaction between the two molecules is the subject of analysis that aims to understand relationship between structure and function, mainly deciphering some fundamental elements of the nanoenvironment where the interaction occurs. In this work we will emphasize the role of understanding nanoenvironmental factors that guide recognition and interaction of target protein and its function modifier, an agrochemical or a drug. The repertoire of nanoenvironment descriptors is used for two selected and specific cases we have approached in order to offer a technological solution for some very important problems that needs special attention in agriculture: elimination of pathogenicity of a bacterium which is attacking citrus plants and formulation of a new fungicide. Finally, we also briefly describe a workflow which might be useful when research requires that model structures of target proteins are firstly generated (starting from genome sequences), followed by identification of ligand-target sites at the surface of those modeled structures, then application of procedures that adequately prepare both protein and ligand structures (the latter also involving filtration that satisfies acceptable adsorption/desorption/metabolism/excretion/toxicity [ADMET] parameters) for virtual high throughput screening (involving docking of ligands to indicated sites) and terminating by ranking of best pairs: target protein with selected ligand.
- 1 December 2006
- Vol. 5 (4) , 717-22
The Star STING server: a multiplatform environment for protein structure analysis.
Star STING is the latest version of the STING suite of programs and corresponding database. We report on five important aspects of this package that have acquired some new characteristics, designed to add key advantages to the whole suite: 1) availability for most popular platforms and browsers, 2) introduction of the STING_DB quality assessment, 3) improvement in algorithms for calculation of three STING parameters, 4) introduction of five new STING modules, and 5) expansion of the existing modules. Star STING is freely accessible at: http://sms.cbi.cnptia.embrapa.br/SMS/, http://trantor.bioc.columbia.edu/SMS, http://www.es.embnet.org/SMS/, http://gibk26.bse.kyutech.ac.jp/SMS/ and http://www.ar.embnet.org/SMS.
- 1 December 2006
- Vol. 5 (4) , 717-22
The Star STING server: a multiplatform environment for protein structure analysis.
Star STING is the latest version of the STING suite of programs and corresponding database. We report on five important aspects of this package that have acquired some new characteristics, designed to add key advantages to the whole suite: 1) availability for most popular platforms and browsers, 2) introduction of the STING_DB quality assessment, 3) improvement in algorithms for calculation of three STING parameters, 4) introduction of five new STING modules, and 5) expansion of the existing modules. Star STING is freely accessible at: http://sms.cbi.cnptia.embrapa.br/SMS/, http://trantor.bioc.columbia.edu/SMS, http://www.es.embnet.org/SMS/, http://gibk26.bse.kyutech.ac.jp/SMS/ and http://www.ar.embnet.org/SMS.
- 31 March 2006
- Vol. 5 (1) , 193-202
Predicting enzyme class from protein structure using Bayesian classification.
Predicting enzyme class from protein structure parameters is a challenging problem in protein analysis. We developed a method to predict enzyme class that combines the strengths of statistical and data-mining methods. This method has a strong mathematical foundation and is simple to implement, achieving an accuracy of 45%. A comparison with the methods found in the literature designed to predict enzyme class showed that our method outperforms the existing methods.
- 31 March 2006
- Vol. 5 (1) , 193-202
Predicting enzyme class from protein structure using Bayesian classification.
Predicting enzyme class from protein structure parameters is a challenging problem in protein analysis. We developed a method to predict enzyme class that combines the strengths of statistical and data-mining methods. This method has a strong mathematical foundation and is simple to implement, achieving an accuracy of 45%. A comparison with the methods found in the literature designed to predict enzyme class showed that our method outperforms the existing methods.
- Open Access
- 1 July 2005
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 33 (Web Server) , W29-W35
The Diamond STING server
Diamond STING is a new version of the STING suite of programs for a comprehensive analysis of a relationship between protein sequence, structure, function and stability. We have added a number of new functionalities by both providing more structure parameters to the STING Database and by improving/expanding the interface for enhanced data handling. The integration among the STING components has also been improved. A new key feature is the ability of the STING server to handle local files containing protein structures (either modeled or not yet deposited to the Protein Data Bank) so that they can be used by the principal STING components: JavaProtein Dossier (JPD) and STING Report. The current capabilities of the new STING version and a couple of biologically relevant applications are described here. We have provided an example where Diamond STING identifies the active site amino acids and folding essential amino acids (both previously determined by experiments) by filtering out all but those residues by selecting the numerical values/ranges for a set of corresponding parameters. This is the fundamental step toward a more interesting endeavor—the prediction of such residues. Diamond STING is freely accessible at http://sms.cbi.cnptia.embrapa.br and http://trantor.bioc.columbia.edu/SMS.
- 1 July 2005
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 33 (Web Server) , W29-W35
Open AccessThe Diamond STING server
Diamond STING is a new version of the STING suite of programs for a comprehensive analysis of a relationship between protein sequence, structure, function and stability. We have added a number of new functionalities by both providing more structure parameters to the STING Database and by improving/expanding the interface for enhanced data handling. The integration among the STING components has also been improved. A new key feature is the ability of the STING server to handle local files containing protein structures (either modeled or not yet deposited to the Protein Data Bank) so that they can be used by the principal STING components: JavaProtein Dossier (JPD) and STING Report. The current capabilities of the new STING version and a couple of biologically relevant applications are described here. We have provided an example where Diamond STING identifies the active site amino acids and folding essential amino acids (both previously determined by experiments) by filtering out all but those residues by selecting the numerical values/ranges for a set of corresponding parameters. This is the fundamental step toward a more interesting endeavor—the prediction of such residues. Diamond STING is freely accessible at http://sms.cbi.cnptia.embrapa.br and http://trantor.bioc.columbia.edu/SMS.