Ruby Phul
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ruby Phul has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Tokeer Ahmad
Jamia Millia Islamia
9 shared publications Umar Farooq
Department of Chemistry, Jamia Millia Islamia, New Delhi, India
5 shared publicationsTokeer Ahmad
Nanochemistry Laboratory, Department of Chemistry, Jamia Millia Islamia, New Delhi 110025, India
4 shared publications- Jahangeer Ahmed
Department of Chemistry, College of Science, King Saud University, Riyadh 11451, Saudi Arabia
3 shared publications - Ahmet Faruk Yazici
Department of Materials Science and Nanotechnology Engineering, Abdullah Gül University, Kayseri, Türkiye
2 shared publications Meryam Sardar
2 shared publications
Latest Publications
- 6 June 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (23) , 38508-38517
Bright green and blue solid-state emitting carbon dots with optimized photoluminescence characteristics for fabrication of high-performance light emitting diodes
- 6 June 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (23) , 38508-38517
Bright green and blue solid-state emitting carbon dots with optimized photoluminescence characteristics for fabrication of high-performance light emitting diodes
- Open Access
- 11 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (21) , 9747-9754
Light-Controlled Electrostatic Self-Assembly of Quantum Dots
- 11 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (21) , 9747-9754
Open AccessLight-Controlled Electrostatic Self-Assembly of Quantum Dots
- Open Access
- 29 January 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (6) , e202400817
Photocatalytic Oxygen Evolution with Prussian Blue Coated ZnO Origami Core‐Shell Nanostructures
The design and development of particulate photocatalysts have been an attractive strategy to incorporate earth‐abundant metal ions to water splitting devices. Herein, we synthesized CoFe‐Prussian blue (PB) coated ZnO origami core‐shell nanostructures (PB@ZnO) with different massratios of PB components and investigated their photocatalytic water oxidation activities in the presence of an electron scavenger. Photocatalytic experiments reveal that the integration of PB on ZnO boosts the oxygen evolution rate by a factor of ~2.4 compared to bare ZnO origami. We ascribe this increased photocatalytic rate to an improved charge carrier separation and transfer due to the formation of heterojunction at the interface between PB and ZnO. Long‐term photocatalytic experiments indicate that the activity and stability of the catalyst was preserved up to 9 h. Our results indicate that the core‐shell PB@ZnO particles possess a proper band energy alignment for the photocatalytic water oxidation process.
- 29 January 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (6) , e202400817
Open AccessPhotocatalytic Oxygen Evolution with Prussian Blue Coated ZnO Origami Core‐Shell Nanostructures
The design and development of particulate photocatalysts have been an attractive strategy to incorporate earth‐abundant metal ions to water splitting devices. Herein, we synthesized CoFe‐Prussian blue (PB) coated ZnO origami core‐shell nanostructures (PB@ZnO) with different massratios of PB components and investigated their photocatalytic water oxidation activities in the presence of an electron scavenger. Photocatalytic experiments reveal that the integration of PB on ZnO boosts the oxygen evolution rate by a factor of ~2.4 compared to bare ZnO origami. We ascribe this increased photocatalytic rate to an improved charge carrier separation and transfer due to the formation of heterojunction at the interface between PB and ZnO. Long‐term photocatalytic experiments indicate that the activity and stability of the catalyst was preserved up to 9 h. Our results indicate that the core‐shell PB@ZnO particles possess a proper band energy alignment for the photocatalytic water oxidation process.
- Open Access
- 18 October 2023
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 287, 05004
Optical control of hierarchical DNA-functionalized nanoparticle self-assembly on 2D surfaces
We investigated the effect of light on the DNA-driven self-assembly to form hierarchical patterns on two dimensional surfaces. We specifically focused on the self-assembly of DNA-functionalized quantum dots (QDs) onto DNA-functionalized glass substrate while illuminating the surface with a laser during coating process. The region illuminated with a green laser remained uncoated with red-emitting QDs while the not-illuminated region was successfully coated. Next, a red laser whose light cannot be absorbed by the red-emitting QDs did not avoid the DNA-driven self-assembly of the QDs onto glass substrate. Additionally, we demonstrated that silica nanoparticles that had been functionalized with DNA and are not able to absorb the light in the visible regime were again coated on the surface while being exposed to a green laser. These results prove that the absorption of the light is responsible for controlling the binding-unbinding process of QDs. Finally, we added DNA-functionalized green-emitting QDs onto the area that was not coated with red-emitting QDs under the green laser exposure. We observed successful coating of previously uncoated regions with the green QDs. This revealed the viability of our technique for building up hierarchical structures without using, sophisticated, or resource-intensive microfabrication methods.
- 18 October 2023
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 287, 05004
Open AccessOptical control of hierarchical DNA-functionalized nanoparticle self-assembly on 2D surfaces
We investigated the effect of light on the DNA-driven self-assembly to form hierarchical patterns on two dimensional surfaces. We specifically focused on the self-assembly of DNA-functionalized quantum dots (QDs) onto DNA-functionalized glass substrate while illuminating the surface with a laser during coating process. The region illuminated with a green laser remained uncoated with red-emitting QDs while the not-illuminated region was successfully coated. Next, a red laser whose light cannot be absorbed by the red-emitting QDs did not avoid the DNA-driven self-assembly of the QDs onto glass substrate. Additionally, we demonstrated that silica nanoparticles that had been functionalized with DNA and are not able to absorb the light in the visible regime were again coated on the surface while being exposed to a green laser. These results prove that the absorption of the light is responsible for controlling the binding-unbinding process of QDs. Finally, we added DNA-functionalized green-emitting QDs onto the area that was not coated with red-emitting QDs under the green laser exposure. We observed successful coating of previously uncoated regions with the green QDs. This revealed the viability of our technique for building up hierarchical structures without using, sophisticated, or resource-intensive microfabrication methods.
- Open Access
- 1 February 2021
- Published by Elsevier in Cell Reports Physical Science
- Vol. 2 (2)
Pushing the limits in photosensitizer-catalyst interaction via a short cyanide bridge for water oxidation
- 1 February 2021
- Published by Elsevier in Cell Reports Physical Science
- Vol. 2 (2)
Open AccessPushing the limits in photosensitizer-catalyst interaction via a short cyanide bridge for water oxidation
- Open Access
Multifunctional Electrochemical Properties of Synthesized Non-Precious Iron Oxide Nanostructures
Magnetic Fe3O4 nanostructures for electrochemical water splitting and supercapacitor applications were synthesized by low temperature simple wet-chemical route. The crystal structure and morphology of as-acquired nanostructures were examined by powder X-ray diffraction and transmission electron microscopy. Magnetic measurements indicate that the as-synthesized Fe3O4 nanostructures are ferromagnetic at room temperature. The synthesized nanostructures have a high-specific surface area of 268 m2/g, which affects the electrocatalytic activity of the electrode materials. The purity of the as-synthesized nanostructures was affirmed by Raman and X-ray Photoelectron studies. The electrochemical activity of the magnetic iron oxide nanoparticles (MIONPs) for the hydrogen evolution reaction (HER) and supercapacitors were investigated in alkaline medium (0.5 M KOH) versus Ag/AgCl at room temperature. The electrocatalysts show low onset potential (~0.18 V) and Tafel slope (~440 mV/dec) for HER. Additionally, the specific capacitance of MIONPs was investigated, which is to be ~135 ± 5 F/g at 5 mV/s in 1 M KOH.
Open AccessMultifunctional Electrochemical Properties of Synthesized Non-Precious Iron Oxide Nanostructures
Magnetic Fe3O4 nanostructures for electrochemical water splitting and supercapacitor applications were synthesized by low temperature simple wet-chemical route. The crystal structure and morphology of as-acquired nanostructures were examined by powder X-ray diffraction and transmission electron microscopy. Magnetic measurements indicate that the as-synthesized Fe3O4 nanostructures are ferromagnetic at room temperature. The synthesized nanostructures have a high-specific surface area of 268 m2/g, which affects the electrocatalytic activity of the electrode materials. The purity of the as-synthesized nanostructures was affirmed by Raman and X-ray Photoelectron studies. The electrochemical activity of the magnetic iron oxide nanoparticles (MIONPs) for the hydrogen evolution reaction (HER) and supercapacitors were investigated in alkaline medium (0.5 M KOH) versus Ag/AgCl at room temperature. The electrocatalysts show low onset potential (~0.18 V) and Tafel slope (~440 mV/dec) for HER. Additionally, the specific capacitance of MIONPs was investigated, which is to be ~135 ± 5 F/g at 5 mV/s in 1 M KOH.
- Open Access
Efficient Multifunctional Catalytic and Sensing Properties of Synthesized Ruthenium Oxide Nanoparticles
Ruthenium oxide is one of the most active electrocatalyst for oxygen evolution (OER) and oxygen reduction reaction (ORR). Herein, we report simple wet chemical route to synthesize RuO2 nanoparticles at controlled temperature. The structural, morphological and surface area studies of the synthesized nanoparticles were conducted with X-ray diffraction, electron microscopy and BETsurface area studies. The bifunctional electrocatalytic performance of RuO2 nanoparticles was studied under different atmospheric conditions for OER and ORR, respectively, versus reversible hydrogen electrode (RHE) in alkaline medium. Low Tafel slopes of RuO2 nanoparticles were found to be ~47 and ~49 mV/dec for OER and ORR, respectively, in oxygen saturated 0.5 M KOH system. Moreover, the catalytic activity of RuO2 nanoparticles was examined against the Horseradish peroxidase enzyme (HRP) at high temperature, and the nanoparticles were applied as a sensor for the detection of H2O2 in the solution.
Open AccessEfficient Multifunctional Catalytic and Sensing Properties of Synthesized Ruthenium Oxide Nanoparticles
Ruthenium oxide is one of the most active electrocatalyst for oxygen evolution (OER) and oxygen reduction reaction (ORR). Herein, we report simple wet chemical route to synthesize RuO2 nanoparticles at controlled temperature. The structural, morphological and surface area studies of the synthesized nanoparticles were conducted with X-ray diffraction, electron microscopy and BETsurface area studies. The bifunctional electrocatalytic performance of RuO2 nanoparticles was studied under different atmospheric conditions for OER and ORR, respectively, versus reversible hydrogen electrode (RHE) in alkaline medium. Low Tafel slopes of RuO2 nanoparticles were found to be ~47 and ~49 mV/dec for OER and ORR, respectively, in oxygen saturated 0.5 M KOH system. Moreover, the catalytic activity of RuO2 nanoparticles was examined against the Horseradish peroxidase enzyme (HRP) at high temperature, and the nanoparticles were applied as a sensor for the detection of H2O2 in the solution.
- 25 June 2020
- Published by Wiley
- p. 187-216
Recent Advances in Metal Oxide/Sulphide‐Based Heterostructure Photocatalysts for Water Splitting and Environmental Remediation
- 25 June 2020
- Published by Wiley
- p. 187-216
Recent Advances in Metal Oxide/Sulphide‐Based Heterostructure Photocatalysts for Water Splitting and Environmental Remediation
- 1 June 2020
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 20 (6) , 3770-3779
Development of Heterostructured Ferroelectric SrZrO3/CdS Photocatalysts with Enhanced Surface Area and Photocatalytic Activity
This paper reports the attempt to develop an efficient heterostructure photocatalyst by employing SrZrO3 as ferroelectric substrate with deposited nanostructured CdS semiconductor on the surface. Primarily bare SrZrO3 and CdS nanoparticles were synthesized by using polymeric citrate precursor and co-precipitation routes, respectively. The chemical deposition technique was used to develop the CdS over the surface of the pre-synthesized SrZrO3 nanoparticles. The synthesized bare nanoparticles and their heterostructure were characterized by XRD which shows the formation of orthorhombic and face centred cubic (FCC) phases of SrZrO3 and CdS, respectively. TEM was used to estimate the morphology and particle size of as-synthesized nanoparticles, which shows the average particle size of 14, 24 and 25 nm for SrZrO3, CdS and SrZrO3/CdS, respectively. The BET surface area of SrZrO3, CdS and SrZrO3/CdS samples was found to be 299, 304 and 312 m2/g respectively. Methylene blue was used as model pollutant to determine the photocatalytic activity of the synthesized nanomaterials. The heterostructure shows an enhanced activity as compared to bare nanoparticles. Dielectric constant and dielectric loss of the nanoparticles was investigated as a function of frequency at room temperature and as a function of temperature at 500 kHz. The room temperature dielectric constant for SrZrO3, CdS and SrZrO3/CdS was found to be 13.2, 17.8 and 25.5 respectively at 100 kHz.
- 1 June 2020
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 20 (6) , 3770-3779
Development of Heterostructured Ferroelectric SrZrO3/CdS Photocatalysts with Enhanced Surface Area and Photocatalytic Activity
This paper reports the attempt to develop an efficient heterostructure photocatalyst by employing SrZrO3 as ferroelectric substrate with deposited nanostructured CdS semiconductor on the surface. Primarily bare SrZrO3 and CdS nanoparticles were synthesized by using polymeric citrate precursor and co-precipitation routes, respectively. The chemical deposition technique was used to develop the CdS over the surface of the pre-synthesized SrZrO3 nanoparticles. The synthesized bare nanoparticles and their heterostructure were characterized by XRD which shows the formation of orthorhombic and face centred cubic (FCC) phases of SrZrO3 and CdS, respectively. TEM was used to estimate the morphology and particle size of as-synthesized nanoparticles, which shows the average particle size of 14, 24 and 25 nm for SrZrO3, CdS and SrZrO3/CdS, respectively. The BET surface area of SrZrO3, CdS and SrZrO3/CdS samples was found to be 299, 304 and 312 m2/g respectively. Methylene blue was used as model pollutant to determine the photocatalytic activity of the synthesized nanomaterials. The heterostructure shows an enhanced activity as compared to bare nanoparticles. Dielectric constant and dielectric loss of the nanoparticles was investigated as a function of frequency at room temperature and as a function of temperature at 500 kHz. The room temperature dielectric constant for SrZrO3, CdS and SrZrO3/CdS was found to be 13.2, 17.8 and 25.5 respectively at 100 kHz.
- 31 July 2019
- Published by Bentham Science Publishers Ltd. in Current Organic Chemistry
- Vol. 23 (9) , 994-1004
Iron Oxide Nanoparticles: An Efficient Nano-catalyst
Magnetic iron oxide nanoparticles have attracted attention because of their idiosyncratic physicochemical characteristics and vast range of applications such as protein separations, catalysis, magnetic resonance imaging (MRI), magnetic sensors, drug delivery, and magnetic refrigeration. The activity of the catalyst depends on the chemical composition, particle size, morphology and also on the atomic arrangements at the surface. The catalytic properties of iron oxide nanoparticles can be easily altered by controlling the shape, size, morphology and surface modification of nanomaterials. This review is focused on the use of iron oxide as a catalyst in various organic reactions viz. oxidation, hydrogenation, C-C coupling, dihydroxylation reactions and its reusability/recoverability.
- 31 July 2019
- Published by Bentham Science Publishers Ltd. in Current Organic Chemistry
- Vol. 23 (9) , 994-1004
Iron Oxide Nanoparticles: An Efficient Nano-catalyst
Magnetic iron oxide nanoparticles have attracted attention because of their idiosyncratic physicochemical characteristics and vast range of applications such as protein separations, catalysis, magnetic resonance imaging (MRI), magnetic sensors, drug delivery, and magnetic refrigeration. The activity of the catalyst depends on the chemical composition, particle size, morphology and also on the atomic arrangements at the surface. The catalytic properties of iron oxide nanoparticles can be easily altered by controlling the shape, size, morphology and surface modification of nanomaterials. This review is focused on the use of iron oxide as a catalyst in various organic reactions viz. oxidation, hydrogenation, C-C coupling, dihydroxylation reactions and its reusability/recoverability.