FGFlavio Lori Grando

Flavio Lori Grando

*This is an algorithmically generated author record based on publicly available information.

Flavio Lori Grando has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Business and Data Intelligence to Support the Construction Management Process in Electrical Power Utilities

    by Vitor Augusto Fiates Silva, Rafael Martins, Allan Said Fadel, Clailton Leopoldo da Silva, Mauro José Bubniak, Isabel Canalli Travagin, Bruna Machado Mulinari, Clayton Hilgemberg da Costa, Dierli Maiara da Rosa Maschio, Flavio Lori Grando, et al.

    The main objective of this work is to present a methodology and software tools that supports the efficient management of transmission line projects through integrated reports from various data sources and systems. This enables the management team to monitor project performance and make informed decisions to maximize overall returns for the company. To achieve this, the research adopts a business intelligence and data analysis-based approach, which includes mapping and organizing information from internal systems, creating a standardized data structure, and implementing managerial reports on a BI platform to monitor resource allocation and efficiency. As outcomes, the study presents a set of dashboards and reports offering an integrated and comprehensive view of activities, including physical and financial progress indicators, risk analysis, and optimization in human resource allocation, highlighting significant savings in project budgets. This approach (methodology and tools) facilitates more accurate and timely analysis, enhances decision-making, efficiency and reliability, and provides strategic advantages for concessionaires in terms of competitiveness, operational sustainability and greater control over the resources employed in transmission projects.

  • Open Access

    Converting the Data Culture in a Power Company: a Case Based on Improving its Construction Management Processes

    by Rafael Martins, Luciane Chaves de Sousa, Allan Said Fadel, Clailton Leopoldo da Silva, Mauro José Bubniak, Isabel Canalli Travagin, Vitor Augusto Fiates Silva, Gilmara Gonçalves da Cruz Maiola, Bruna Machado Mulinari, Clayton Hilgemberg da Costa, et al.

    This paper presents the strategies and initial implementations of a data culture conversion process at a company in the electricity sector. Solutions are being developed within the scope of the construction management macro-process, which involves multiple sectors of the company, as well as external agents. The strategy is based on implementing Proofs of Concept as tools for converting the data culture within the company and, at the same time, supporting the essential activities of construction management. The proofs of concept aligned with the change in data culture have two components: technology and people. The first consists mainly of intelligent automation and process optimization. The second component involves sensitization, training and developing solutions together with the company's employees. The results involve a reduction in workload since some activities have been partially or totally transferred to the software. Greater assertiveness in estimating numerical data, such as prices and budgets. Increased reliability by reducing human intervention and complex calculations. Greater controllability by monitoring multiple activities and sectors, simplifying management. Finally, the integration of technology and people has shown significant advances in organizational culture, enabling employees to have a greater understanding of advanced tools and methods and to be able to identify opportunities and share solutions within the company.


  • Power System Monitoring Through Low-Voltage Distribution Network Using freePMU

    by Pedro V. H. Seger, Flavio L. Grando, Andre E. Lazzaretti, Miguel Moreto, Gustavo W. Denardin, Cristian R. Pastro

    This article presents the latest developments of a phasor measurement unit (PMU), hereby named freePMU , aimed at a large-scale deployment in low-voltage distribution networks. The defining characteristics of this device are its low cost, general-purpose hardware architecture, and software now made open source. This PMU has already been shown to reliably measure voltage, angle, and frequency events in a real distribution network while complying with the IEEE class P PMU standards. In this work, several new results are shown, such as harmonic estimation, detection of different consumer load patterns, and load variations on a distribution feeder. Moreover, its hardware and software architectures are now made public, contributing to the project goal of a cheap and mass-deployable PMU. All of those results attest to the original contributions of this work, compared to other PMUs focused on distribution systems.


  • The Impact of PMU Data Precision and Accuracy on Event Classification in Distribution Systems

    by Flavio Lori Grando, Andre Eugenio Lazzaretti, Miguel Moreto

    The use of synchrophasor data is recurrent in electrical power systems and has an increasing demand in distribution networks. The quality of this data can directly influence later stages related to decision-making. In this sense, this work presents the impact analysis of synchrophasor data quality on the event classification in distribution networks. We propose a controlled environment, simulating 37 200 events and including errors in the data with different levels, distributions, and biases, enabling evaluations according to the data’s precision and accuracy. Additionally, we present 2 160 classification results involving six machine learning methods, three different groups with 4, 8, and 62 events (classes) per group, and several characteristics of phasor errors. In addition to comparative analyzes, the research scope makes it possible to map the influence of multiple sources of errors, disclosing the data quality relevance and how it affects the event recognition in the distribution systems – a subject underexplored in the recent literature.


  • A PID SRF‐PLL based algorithm for positive‐sequence synchrophasor measurements

    by Gabriel U. Carvalho, Gustavo W. Denardin, Rafael Cardoso, Flavio L. Grando

    Most of the proposed algorithms for synchrophasor estimation are based on the Discrete Fourier Transform (DFT). However, this technique has well‐known limitations, such as the leakage effect. Alternatively, this paper presents a positive‐sequence synchrophasor measurement algorithm based on a Synchronous Reference Frame Phase‐Locked Loop (SRF‐PLL). The algorithm is modular and consists of four stages. The first one is the abc‐dq transform that, with the aid of the second stage, a Finite Impulse Response (FIR) provides the positive‐sequence of the grid voltages. The filter also helps to improve the signal‐to‐noise ratio. This filter class was chosen due to its characteristic of linear phase and constant group delay to avoid unwanted phase distortions at the measurements. The third stage is an SRF‐PLL based on a PID controller that estimates the amplitude and phase of the grid voltage's positive‐sequence component and the grid frequency. By assessing the dynamic condition tests, it was observed that the PLL could not comply with all the IEEE standard requirements. Therefore, a fourth stage was included to calculate the frequency, and Rate of Change of Frequency (ROCOF) based on the estimated positive‐sequence phase. Experimental results obtained with a test platform shown that the proposed algorithm complies with all IEEE C37.118.1‐2011 and C37.118.1a‐2014 standard requirements.


  • Open Access

    Robotic Process Automation Extended with Artificial Intelligence Techniques in Power Distribution Utilities

    by André Pedretti, Mariana Santini, Josnei Scolimoski, Mauro Henrique Brito de Queiroz, Frank Toshioka, Eloy de Paula Rocha Junior, Nelson de Pauli Júnior, Marcio Takashi Yomura, Clayton Hilgemberg da Costa, Fabio Alessandro Guerra, et al.


  • A method for synchronized harmonic phasor measurement based on hardware‐enhanced Fast Fourier Transform

    by Flavio L. Grando, Gustavo W. Denardin, Miguel Moreto, André E. Lazzaretti, Hugo Vieira Neto

    Synchrophasor technology has received considerable attention in the past few years due to its unique ability to characterize the dynamics of power systems and therefore this paper proposes a low computational cost method to estimate harmonic synchronized phasors for electrical power systems monitoring. The main goal is to estimate the synchronized magnitude, phase, and frequency not only for the fundamental frequency but also for the harmonic components of the signals. Such method is simple to deploy in embedded platforms with limited computation resources and hence it is suitable for the development of low‐cost phasor measurement units (PMUs), which are particularly relevant for applications in distribution systems. The proposed approach makes use of the Fast Fourier Transform along with a hardware‐based scheme in order to mitigate the spectrum leakage effect. This approach consists in a dynamic sampling rate based on the estimated fundamental frequency of the power system. Several experiments were carried out with the proposed method implemented in a general‐purpose hardware development platform, and include the analysis of synchronized harmonic phasor estimation, tests based on the IEEE C37.118.1 PMU standard and the recordings of real power system events. Results show significant error reductions with low computational cost, making it possible to monitor synchronized harmonics, fulfill the requirements of a class P PMU and record power systems events with similar performance to commercial PMU devices.


  • Automatic Power Signature Analysis using Prony's Method and Machine Learning-Based Classifiers

    by Hellen C. Ancelmo, Flavio L. Grando, Clayton H. Da Costa, Bruna M. Mulinari, Elder Oroski, Andre E. Lazzaretti, Fabiana Pottker, Douglas P. B. Renaux

    The selection of the feature extraction method that defines the electric power signature of an appliance is a fundamental step for the Non-Intrusive Load Monitoring (NILM) problem. In general, harmonic content, damping and transient switching features are normally used to classify different loads connected or disconnected in a consumer unit. In this sense, this paper introduces the use of frequency, phase, amplitude, and damping factor of current signals estimated by the Prony’s Method. Using these components as features for different machine learning classifiers, such as k-Nearest Neighbors (k-NN), Support Vector Machine (SVM) and Ensemble, one can obtain an accuracy of 92% with the Ensemble classifier for different waveforms from a publicly available database. Additionally, we show that the proposed method presents comparable results with state-of-the-art methods for power signature classification, indicating that the Prony’s Method as a feature extractor is a promising and still underexplored alternative in the related literature.


  • A Synchrophasor Test Platform for Development and Assessment of Phasor Measurement Units

    by Flavio Lori Grando, Andre Eugenio Lazzaretti, Gustavo Weber Denardin, Miguel Moreto, Hugo Vieira Neto

    The development of platforms and methods for test and calibration of phasor measurement units (PMUs) has drawn attention from the power systems community, especially due to the wide range of specific tests that must be performed. Aiming at reducing labor-intensive processes and the complexity of such tests, this paper presents an automated platform for test, calibration, and performance assessment of PMUs following the IEEE Std C37.118.1. The platform is composed of signal-generation hardware and software running on a personal computer. The test signals are synthesized in software, allowing different waveform configurations for automated testing. Also, the software receives information from the PMU under test and compares it to reference data, displaying results and statistics in real time. Because most of the functions of the system are performed in software, easy inclusion of additional tests or migration to other signal-generation hardware platforms is possible. The resulting test system allows tracing the behavior of the hardware and corresponding embedded software used in the PMU architecture under test through thousands of measurements collected in just a few minutes. The simple and versatile low-cost system presented in this paper enables accurate, flexible, and versatile automated testing of PMU devices with real-time visualization of results.


  • Test platform for analysis and development of Phasor Measurement Units (PMU)

    by Flavio Lori Grando, Gustavo Weber Denardin, Miguel Moreto

    This paper presents the development of a platform for automatically testing Phasor Measurement Units (PMU). In order to develop such platform, it is proposed a multitasking application for PMUs testing in accordance to the Synchrophasors Measurement Standard IEEE C37.118.1-2011. The application is managed by a personal computer with visual interface, which allows the user to configure signal parameters as well as to apply the automated tests set out by the IEEE standard. Until this stage of development, only the steady-state tests were implemented and exposed as a result. At first, the developed application focuses on pattern tests, aiming the development of algorithms and architectures for PMUs. In future works it is intended to provide device certification. To obtain experimental results that confirming the ability of the platform to evaluate PMUS, a well-known PMU was submitted to a set of developed tests.