Leandro de Souza Leão
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Leandro de Souza Leão has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Aldemir Ap Cavalini
Federal University of Uberlândia
4 shared publications Maurício Vicente Donadon
Instituto Tecnológico de Aeronáutica (ITA)
4 shared publications- A.G. Cunha-Filho
Federal University of Uberlândia, School of Mechanical Engineering, Campus Santa Mônica, P.O. Box 593, CEP 38400-902 Uberlândia, MG, Brazil
3 shared publications André Garcia Cunha Filho
3 shared publications- Antonio Marcos Gonçalves de Lima
Universidade Federal de Uberlândia, Brasil
3 shared publications Antônio Marcos Gonçalves de Lima
2 shared publications
Latest Publications
- Open Access
- 20 February 2020
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia
Detection and control of transverse cracks on rotating machines
- 20 February 2020
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia
Open AccessDetection and control of transverse cracks on rotating machines
- 1 October 2019
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 458, 123-142
Fault detection in rotating machinery by using the modal state observer approach
- 1 October 2019
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 458, 123-142
Fault detection in rotating machinery by using the modal state observer approach
- 26 July 2019
- Published by Taylor & Francis in Inverse Problems in Science and Engineering
- Vol. 28 (5) , 695-715
Rotating machinery health evaluation by modal force identification
Crack growth monitoring methodologies have been developed in many engineering applications mainly due to the associated risks of malfunctioning, damage, and economic losses. Intending both to increase safe operational life and reduce maintenance cost, a model-based methodology for force identification in mechanical systems is proposed, aiming at detecting and monitoring forces appearing and development, such as those related to transversal crack, unbalance, and others associated to different faults in rotating machines. A force identification methodology using orthogonal functions is developed considering that the modal base of the rotating system is known, which permits the system modal force identification by using a reduced number of measures. The proposed methodology is validated both numerically and experimentally using a cracked rotor, composed of a flexible horizontal shaft, two rigid discs, and two self-aligning ball bearings. Finally, it is demonstrated that the monitoring of the modal forces can be potentially beneficial to evaluate the structural health condition of rotating components.
- 26 July 2019
- Published by Taylor & Francis in Inverse Problems in Science and Engineering
- Vol. 28 (5) , 695-715
Rotating machinery health evaluation by modal force identification
Crack growth monitoring methodologies have been developed in many engineering applications mainly due to the associated risks of malfunctioning, damage, and economic losses. Intending both to increase safe operational life and reduce maintenance cost, a model-based methodology for force identification in mechanical systems is proposed, aiming at detecting and monitoring forces appearing and development, such as those related to transversal crack, unbalance, and others associated to different faults in rotating machines. A force identification methodology using orthogonal functions is developed considering that the modal base of the rotating system is known, which permits the system modal force identification by using a reduced number of measures. The proposed methodology is validated both numerically and experimentally using a cracked rotor, composed of a flexible horizontal shaft, two rigid discs, and two self-aligning ball bearings. Finally, it is demonstrated that the monitoring of the modal forces can be potentially beneficial to evaluate the structural health condition of rotating components.
- 19 August 2018
- Published by Springer Nature
- p. 175-189
The Influence of the Vibration Suppression on the Rotor Crack Detection Performance
- 19 August 2018
- Published by Springer Nature
- p. 175-189
The Influence of the Vibration Suppression on the Rotor Crack Detection Performance
- 6 August 2017
- Published by ASME International
Fault Detection in Rotating Machinery by Using the Modal State Observer Approach
The presence of transversal cracks in rotating shafts can lead to catastrophic failures, which imply economic losses and security issues. In the last years, an important attention has been devoted to this subject, leading to the development of several vibration-based structural health monitoring approaches. In this paper, a fault detection technique based on the so-called modal state observer is applied to detect transversal cracks in rotating machines. The Luenberger state observer is described in modal domain to determine the most affected vibration modes due to the crack presence. A cracked rotor composed by a flexible horizontal shaft, two rigid discs, and two self-aligning ball bearings is used for illustration purposes. The additional flexibility introduced by the crack is calculated by using the linear fracture mechanics theory. The breathing behavior of the crack is simulated according to the Mayes’ model, in which the crack transition from fully open to fully closed is described by a cosine function. The obtained results lead to the conclusion that the modal state observer is a potential technique to detect cracks in rotating machines.
- 6 August 2017
- Published by ASME International
Fault Detection in Rotating Machinery by Using the Modal State Observer Approach
The presence of transversal cracks in rotating shafts can lead to catastrophic failures, which imply economic losses and security issues. In the last years, an important attention has been devoted to this subject, leading to the development of several vibration-based structural health monitoring approaches. In this paper, a fault detection technique based on the so-called modal state observer is applied to detect transversal cracks in rotating machines. The Luenberger state observer is described in modal domain to determine the most affected vibration modes due to the crack presence. A cracked rotor composed by a flexible horizontal shaft, two rigid discs, and two self-aligning ball bearings is used for illustration purposes. The additional flexibility introduced by the crack is calculated by using the linear fracture mechanics theory. The breathing behavior of the crack is simulated according to the Mayes’ model, in which the crack transition from fully open to fully closed is described by a cosine function. The obtained results lead to the conclusion that the modal state observer is a potential technique to detect cracks in rotating machines.
- 1 October 2016
- Published by Elsevier in Composite Structures
- Vol. 153, 815-824
Dynamic and aeroelastic behavior of composite plates with multimode resonant shunted piezoceramics in series
- 1 October 2016
- Published by Elsevier in Composite Structures
- Vol. 153, 815-824
Dynamic and aeroelastic behavior of composite plates with multimode resonant shunted piezoceramics in series
- 1 October 2016
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 79, 99-111
Flutter suppression of plates using passive constrained viscoelastic layers
- 1 October 2016
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 79, 99-111
Flutter suppression of plates using passive constrained viscoelastic layers
- 13 January 2016
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1135, 88-103
Application of Shunted Piezoelectric Materials in Aeroelasticity
This paper presents a numerical study on the influence of multimodal shunt circuit parameters in the flutter velocity of a typical section under an unsteady airflow. Flutter on typical sections is a kind of self-excited oscillation which can occur due to the interaction with the airflow. In the flutter point, when the critical dynamic pressure is reached, the vibrations of the typical section become unstable and increase fast and significantly in time. As a result, it can lead the structure to failure. Thus, it becomes important to investigate the possibility of reducing the effects of flutter in order to increase the reliability of composite structures during service. In this work, the aero-electromechanical dynamic model formulation is based on the Hamilton principle. The unsteady aerodynamic forces are calculated based on the linearized thin-airfoil theory, proposed by Theodorsen. The passive element responsible for the energy dissipation is a multimodal resonant shunt circuit in series topology, attached to a piezoelectric patch. An iterative solution algorithm is proposed to solve the resultant nonlinear eigenvalue problem. The optimum shunt tuning is firstly performed using Hagood and Flotow’s propositions; then, it is used an heuristic optimization algorithm, based on Differential Evolution. The preliminary results indicate that the flutter speed can be affected by the passive control, both in its mechanical aspect as electrical.
- 13 January 2016
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1135, 88-103
Application of Shunted Piezoelectric Materials in Aeroelasticity
This paper presents a numerical study on the influence of multimodal shunt circuit parameters in the flutter velocity of a typical section under an unsteady airflow. Flutter on typical sections is a kind of self-excited oscillation which can occur due to the interaction with the airflow. In the flutter point, when the critical dynamic pressure is reached, the vibrations of the typical section become unstable and increase fast and significantly in time. As a result, it can lead the structure to failure. Thus, it becomes important to investigate the possibility of reducing the effects of flutter in order to increase the reliability of composite structures during service. In this work, the aero-electromechanical dynamic model formulation is based on the Hamilton principle. The unsteady aerodynamic forces are calculated based on the linearized thin-airfoil theory, proposed by Theodorsen. The passive element responsible for the energy dissipation is a multimodal resonant shunt circuit in series topology, attached to a piezoelectric patch. An iterative solution algorithm is proposed to solve the resultant nonlinear eigenvalue problem. The optimum shunt tuning is firstly performed using Hagood and Flotow’s propositions; then, it is used an heuristic optimization algorithm, based on Differential Evolution. The preliminary results indicate that the flutter speed can be affected by the passive control, both in its mechanical aspect as electrical.
- 1 January 2015
- Published by SWGE Sistemas Ltda
APPLICATION OF SHUNTED PIEZOELECTRIC MATERIALS IN AEROELASTICITY
- 1 January 2015
- Published by SWGE Sistemas Ltda
APPLICATION OF SHUNTED PIEZOELECTRIC MATERIALS IN AEROELASTICITY