Alejandro Suarez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alejandro Suarez has a total of 187 co-authors. Here are the top co-authors by number of shared publications:
- Anibal Ollero
GRVC Robotics Lab, Universidad de Sevilla
21 shared publications - Guillermo Heredia
GRVC Robotics Lab, Universidad de Sevilla, Sevilla, Spain
8 shared publications Anibal Ollero
6 shared publications- Alvaro Caballero
GRVC Robotics Laboratory, Universidad de Sevilla, Seville, Spain
3 shared publications - Alessandro Garzelli
University of Seville
2 shared publications - Alessandro Zavoli
Sapienza University of Rome
2 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Elsevier in Acta Astronautica
- Vol. 251, 122-139
Successive convexification for 6-DoF Moon landing using Modified Rodrigues Parameters with probabilistic upper and lower thrust bounds
- 30 September 2026
- Published by Elsevier in Acta Astronautica
- Vol. 251, 122-139
Open AccessSuccessive convexification for 6-DoF Moon landing using Modified Rodrigues Parameters with probabilistic upper and lower thrust bounds
- Open Access
- 23 September 2026
- Published by Elsevier in Acta Astronautica
- Vol. 250, 636-654
Quasi-spectral predictive guidance for autonomous rendezvous and docking with state triggered phase transition and non-convex path constraint
- 23 September 2026
- Published by Elsevier in Acta Astronautica
- Vol. 250, 636-654
Open AccessQuasi-spectral predictive guidance for autonomous rendezvous and docking with state triggered phase transition and non-convex path constraint
- Open Access
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (5) , 6194-6201
A Cross-Embodiment Gripper Benchmark for Rigid-Object Manipulation in Aerial and Industrial Robotics
Robotic grippers are increasingly deployed across industrial, collaborative, and aerial platforms, where each embodiment imposes distinct mechanical, energetic, and operational constraints. Established YCB and NIST benchmarks quantify grasp success, force, or timing on a single platform, but do not evaluate cross-embodiment transferability or energy-aware performance – essential for modern mobile and aerial manipulation. This letter introduces the Cross-Embodiment Gripper Benchmark (CEGB), a reproducible benchmarking suite extending YCB and selected NIST metrics with three additional components: a transfer-time benchmark measuring embodiment exchange effort, an energy-consumption benchmark evaluating grasping and holding efficiency, and an intent-specific ideal payload assessment. Together, these metrics characterize grasp performance and cross-platform suitability. CEGB is validated on two mechanically distinct grippers. The experimental evaluation quantifies embodiment-dependent differences in transfer time, energetic efficiency, and operational capability under unified statistical reporting. CEGB provides a reproducible foundation for cross-platform, energy-aware gripper evaluation.
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (5) , 6194-6201
Open AccessA Cross-Embodiment Gripper Benchmark for Rigid-Object Manipulation in Aerial and Industrial Robotics
Robotic grippers are increasingly deployed across industrial, collaborative, and aerial platforms, where each embodiment imposes distinct mechanical, energetic, and operational constraints. Established YCB and NIST benchmarks quantify grasp success, force, or timing on a single platform, but do not evaluate cross-embodiment transferability or energy-aware performance – essential for modern mobile and aerial manipulation. This letter introduces the Cross-Embodiment Gripper Benchmark (CEGB), a reproducible benchmarking suite extending YCB and selected NIST metrics with three additional components: a transfer-time benchmark measuring embodiment exchange effort, an energy-consumption benchmark evaluating grasping and holding efficiency, and an intent-specific ideal payload assessment. Together, these metrics characterize grasp performance and cross-platform suitability. CEGB is validated on two mechanically distinct grippers. The experimental evaluation quantifies embodiment-dependent differences in transfer time, energetic efficiency, and operational capability under unified statistical reporting. CEGB provides a reproducible foundation for cross-platform, energy-aware gripper evaluation.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Practice
- Vol. 1, 173-177
Transferability Through Cooperative Competitions
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Practice
- Vol. 1, 173-177
Transferability Through Cooperative Competitions
- Open Access
A Cross-Embodiment Gripper Benchmark for Rigid-Object Manipulation in Aerial and Industrial Robotics
Robotic grippers are increasingly deployed across industrial, collaborative, and aerial platforms, where each embodiment imposes distinct mechanical, energetic, and operational constraints. Established YCB and NIST benchmarks quantify grasp success, force, or timing on a single platform, but do not evaluate cross-embodiment transferability or energy-aware performance, capabilities essential for modern mobile and aerial manipulation. This letter introduces the Cross-Embodiment Gripper Benchmark (CEGB), a compact and reproducible benchmarking suite extending YCB and selected NIST metrics with three additional components: a transfer-time benchmark measuring the practical effort required to exchange embodiments, an energy-consumption benchmark evaluating grasping and holding efficiency, and an intent-specific ideal payload assessment reflecting design-dependent operational capability. Together, these metrics characterize both grasp performance and the suitability of reusing a single gripper across heterogeneous robotic systems. A lightweight self-locking gripper prototype is implemented as a reference case. Experiments demonstrate rapid embodiment transfer (median ~= 17.6 s across user groups), low holding energy for gripper prototype (~= 1.5 J per 10 s), and consistent grasp performance with cycle times of 3.2 - 3.9 s and success rates exceeding 90%. CEGB thus provides a reproducible foundation for cross-platform, energy-aware evaluation of grippers in aerial and manipulators domains.
Open AccessA Cross-Embodiment Gripper Benchmark for Rigid-Object Manipulation in Aerial and Industrial Robotics
Robotic grippers are increasingly deployed across industrial, collaborative, and aerial platforms, where each embodiment imposes distinct mechanical, energetic, and operational constraints. Established YCB and NIST benchmarks quantify grasp success, force, or timing on a single platform, but do not evaluate cross-embodiment transferability or energy-aware performance, capabilities essential for modern mobile and aerial manipulation. This letter introduces the Cross-Embodiment Gripper Benchmark (CEGB), a compact and reproducible benchmarking suite extending YCB and selected NIST metrics with three additional components: a transfer-time benchmark measuring the practical effort required to exchange embodiments, an energy-consumption benchmark evaluating grasping and holding efficiency, and an intent-specific ideal payload assessment reflecting design-dependent operational capability. Together, these metrics characterize both grasp performance and the suitability of reusing a single gripper across heterogeneous robotic systems. A lightweight self-locking gripper prototype is implemented as a reference case. Experiments demonstrate rapid embodiment transfer (median ~= 17.6 s across user groups), low holding energy for gripper prototype (~= 1.5 J per 10 s), and consistent grasp performance with cycle times of 3.2 - 3.9 s and success rates exceeding 90%. CEGB thus provides a reproducible foundation for cross-platform, energy-aware evaluation of grippers in aerial and manipulators domains.
- Open Access
- 27 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (19) , 10469
Stochastic Path Planning with Obstacle Avoidance for UAVs Using Covariance Control
Unmanned aerial vehicles (UAVs) operating in uncertain environments must plan safe and efficient trajectories while avoiding obstacles. This work addresses this challenge by formulating UAV path planning as a stochastic optimal control problem using covariance control. The objective is to generate a closed-loop guidance policy that steers both the mean and covariance of the UAV’s state toward a desired target distribution while ensuring probabilistic collision avoidance with ellipsoidal obstacles. The stochastic problem is convexified and reformulated as a sequence of deterministic optimization problems, enabling efficient computation even from coarse initial guesses. Simulation results demonstrate that the proposed method successfully produces robust trajectories and feedback policies that satisfy chance constraints on obstacle avoidance and reach the target with prescribed statistical characteristics.
- 27 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (19) , 10469
Open AccessStochastic Path Planning with Obstacle Avoidance for UAVs Using Covariance Control
Unmanned aerial vehicles (UAVs) operating in uncertain environments must plan safe and efficient trajectories while avoiding obstacles. This work addresses this challenge by formulating UAV path planning as a stochastic optimal control problem using covariance control. The objective is to generate a closed-loop guidance policy that steers both the mean and covariance of the UAV’s state toward a desired target distribution while ensuring probabilistic collision avoidance with ellipsoidal obstacles. The stochastic problem is convexified and reformulated as a sequence of deterministic optimization problems, enabling efficient computation even from coarse initial guesses. Simulation results demonstrate that the proposed method successfully produces robust trajectories and feedback policies that satisfy chance constraints on obstacle avoidance and reach the target with prescribed statistical characteristics.
- Open Access
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Field Robotics
- Vol. 2, 549-573
Multi-Aerial Robotic System for Power Line Inspection and Maintenance: Comparative Analysis From the AERIAL-CORE Final Experiments
This paper shows how different types of novel aerial robots with new functionalities can cooperate in the inspection and maintenance (I&M) of power lines, one of the largest and most essential civil infrastructures in any country. This study relies on the results from the AERIAL-CORE research and innovation project. The paper describes an I&M validation scenario and evaluation metrics for three linked operation domains: 1) long-range inspection for the detection of possible damages on power lines in a post-storm scenario, 2) aerial manipulation for the installation of devices on power lines, and 3) aerial co-working to help human operators in their activities at height. It presents the demonstration of ten different aerial robots in a real scenario with 10 km of power lines. The platforms include morphing-wing and VTOL (vertical take-off and landing) UAVs (unmanned aerial vehicles), multi-rotors, and aerial manipulators. These platforms, custom-developed or commercially available, are evaluated in the three application domains, describing the new functionalities implemented for each case. The paper ends with guidelines, design principles, and lessons learned for future developments derived from the final demonstration of the project.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Field Robotics
- Vol. 2, 549-573
Open AccessMulti-Aerial Robotic System for Power Line Inspection and Maintenance: Comparative Analysis From the AERIAL-CORE Final Experiments
This paper shows how different types of novel aerial robots with new functionalities can cooperate in the inspection and maintenance (I&M) of power lines, one of the largest and most essential civil infrastructures in any country. This study relies on the results from the AERIAL-CORE research and innovation project. The paper describes an I&M validation scenario and evaluation metrics for three linked operation domains: 1) long-range inspection for the detection of possible damages on power lines in a post-storm scenario, 2) aerial manipulation for the installation of devices on power lines, and 3) aerial co-working to help human operators in their activities at height. It presents the demonstration of ten different aerial robots in a real scenario with 10 km of power lines. The platforms include morphing-wing and VTOL (vertical take-off and landing) UAVs (unmanned aerial vehicles), multi-rotors, and aerial manipulators. These platforms, custom-developed or commercially available, are evaluated in the three application domains, describing the new functionalities implemented for each case. The paper ends with guidelines, design principles, and lessons learned for future developments derived from the final demonstration of the project.
- 29 January 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 187
Aerial-ground testbed for simulating compliant bimanual on-orbit operations: From aerial to space robotic manipulation
- 29 January 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 187
Aerial-ground testbed for simulating compliant bimanual on-orbit operations: From aerial to space robotic manipulation
- Open Access
- 31 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. 32 (3) , 8-25
Door-to-Door Parcel Delivery From Supply Point to User’s Home With Heterogeneous Robot Team: The euROBIN First-Year Robotics Hackathon
Logistics and service operations involving parcel preparation, delivery, and unpacking from a supply point to a user’s home could be carried out completely by robots in the near future, taking advantage of the capabilities of the different robot morphologies for the logistics, outdoor, and domestic environments. The use of robots for parcel delivery can contribute to the goals of sustainability and reduced emissions by exploiting their different locomotion modalities (wheeled, legged, and aerial). This article reports the development and results obtained from the first robotics hackathon celebrated as part of the European Robotics and Artificial Intelligence Network involving eight robotic platforms in three domains: 1) an industrial robotic arm for parcel preparation at the supply point, 2) a Centauro robot, a dual-arm aerial manipulator, and a wheeled-legged quadruped for parcel transportation, and 3) two humanoid robots and two commercial mobile manipulators for parcel delivery and unpacking in domestic scenarios. The article describes the joint operation and the evaluation scenario, the features and capabilities of the robots, particularly those involved in the realization of the tasks, and the lessons learned.
- 31 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. 32 (3) , 8-25
Open AccessDoor-to-Door Parcel Delivery From Supply Point to User’s Home With Heterogeneous Robot Team: The euROBIN First-Year Robotics Hackathon
Logistics and service operations involving parcel preparation, delivery, and unpacking from a supply point to a user’s home could be carried out completely by robots in the near future, taking advantage of the capabilities of the different robot morphologies for the logistics, outdoor, and domestic environments. The use of robots for parcel delivery can contribute to the goals of sustainability and reduced emissions by exploiting their different locomotion modalities (wheeled, legged, and aerial). This article reports the development and results obtained from the first robotics hackathon celebrated as part of the European Robotics and Artificial Intelligence Network involving eight robotic platforms in three domains: 1) an industrial robotic arm for parcel preparation at the supply point, 2) a Centauro robot, a dual-arm aerial manipulator, and a wheeled-legged quadruped for parcel transportation, and 3) two humanoid robots and two commercial mobile manipulators for parcel delivery and unpacking in domestic scenarios. The article describes the joint operation and the evaluation scenario, the features and capabilities of the robots, particularly those involved in the realization of the tasks, and the lessons learned.
- Open Access
- 1 October 2024
- Published by Springer Nature in International Journal of Social Robotics
- Vol. 16 (11-12) , 2109-2132
Through-Window Home Aerial Delivery System with In-Flight Parcel Load and Handover: Design and Validation in Indoor Scenario
This paper presents the design, development, and validation in indoor scenario of an aerial delivery system intended to conduct the delivery of light parcels directly to the user through the window of his/her home, motivated by the convenience of facilitating the access to medicines to people with reduced mobility.The system consists of a fully-actuated multi-rotor (FAMR) equipped with a front basket where the parcel to be delivered is loaded by a lightweight and compliant anthropomorphic dual arm system (LiCAS) located at the supply point, using one of the arms to drop the parcel in the basket while the other arm holds its base to support the sudden moment exerted at the FAMR. The paper analyses four types of physical interactions raised during the operation on flight: (1) sudden changes in the mass distribution of the FAMR during the load/unload phase, affecting the multi-rotor position-attitude controllers, (2) impact and impulsive forces exerted by the human on the FAMR to demonstrate the reliability and robustness of conventional cascade controllers, (3) passive accommodation of the LiCAS while holding the FAMR during the parcel load, relying on the mechanical joint compliance, and (4) compliant human–FAMR interaction, interpreting the multi-rotor pose control error as a Cartesian/angular deflection to implement an admittance controller that allows the user guiding the platform. Experimental results allow the identification and characterization of these effects for different payload masses. The execution of the complete operation, involving the parcel load with the LiCAS and handover by the user through a window, is validated in a representative indoor scenario. Graphical
- 1 October 2024
- Published by Springer Nature in International Journal of Social Robotics
- Vol. 16 (11-12) , 2109-2132
Open AccessThrough-Window Home Aerial Delivery System with In-Flight Parcel Load and Handover: Design and Validation in Indoor Scenario
This paper presents the design, development, and validation in indoor scenario of an aerial delivery system intended to conduct the delivery of light parcels directly to the user through the window of his/her home, motivated by the convenience of facilitating the access to medicines to people with reduced mobility.The system consists of a fully-actuated multi-rotor (FAMR) equipped with a front basket where the parcel to be delivered is loaded by a lightweight and compliant anthropomorphic dual arm system (LiCAS) located at the supply point, using one of the arms to drop the parcel in the basket while the other arm holds its base to support the sudden moment exerted at the FAMR. The paper analyses four types of physical interactions raised during the operation on flight: (1) sudden changes in the mass distribution of the FAMR during the load/unload phase, affecting the multi-rotor position-attitude controllers, (2) impact and impulsive forces exerted by the human on the FAMR to demonstrate the reliability and robustness of conventional cascade controllers, (3) passive accommodation of the LiCAS while holding the FAMR during the parcel load, relying on the mechanical joint compliance, and (4) compliant human–FAMR interaction, interpreting the multi-rotor pose control error as a Cartesian/angular deflection to implement an admittance controller that allows the user guiding the platform. Experimental results allow the identification and characterization of these effects for different payload masses. The execution of the complete operation, involving the parcel load with the LiCAS and handover by the user through a window, is validated in a representative indoor scenario. Graphical