Guillermo Javier Rubio Astorga
Research Subjects
Research Interests
Guillermo Javier Rubio Astorga has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Juan Diego Sánchez-Torres
ITESO
8 shared publications - David Enrique Castro-Palazuelos
División de Estudios de Posgrado e Investigación, Tecnológico Nacional de México/IT de Culiacán, Culiacán 80220, Mexico
7 shared publications Alexander G. Loukianov
Laboratory of Automatic Control CINVESTAV Jalisco Zapopan Mexico
6 shared publications- Julio César Picos-Ponce
División de Estudios de Posgrado e Investigación, Tecnológico Nacional de México-IT, Culiacán 80220, Sinaloa, México
4 shared publications - Martín Alfredo Alarcón‐Carbajal
División de Estudios de Posgrado e Investigación, Tecnológico Nacional de México/IT de Culiacán, Culiacán 80220, Mexico
4 shared publications - Jesús Ángel González-Castro
División de Estudios de Posgrado e Investigación, Tecnológico Nacional de México/IT de Culiacán, Culiacán 80220, Mexico
3 shared publications
Latest Publications
- Open Access
- 22 July 2026
- Published by MDPI AG in Electricity
- Vol. 7 (3) , 72
Discrete-Time Integral Sliding Mode Control with Optimal Reaching Gain: Application to a Photovoltaic Battery Charging System
Discrete-time sliding mode controllers that utilize saturation-based reaching laws require a gain that ensures contraction within the boundary layer in the presence of multiplicative gain uncertainty. The conventional fixed-gain approach does not maintain this property at moderate uncertainty levels. This work introduces a family of admissible reaching gains and identifies a unique optimal gain that guarantees a specified worst-case contraction. The proposed method offers a closed-form solution to the worst-case contraction problem over the gain-uncertainty interval and determines the optimal contraction factor for the saturation-based reaching law for any finite uncertainty ratio. The optimal gain is integrated into a discrete-time integral sliding-mode framework, thereby eliminating the reaching phase. Furthermore, a past-step disturbance estimator with a confidence factor is introduced to prevent error amplification, which reduces the quasi-sliding band from first to second order in the sampling period when the realized gain approximates its nominal value. The effectiveness of the proposed approach is validated through its application to a photovoltaic battery-charging system with a DC–DC boost converter, achieving robust inductor-current regulation across three battery banks under varying irradiance conditions in a switching-level model with parasitic elements.
- 22 July 2026
- Published by MDPI AG in Electricity
- Vol. 7 (3) , 72
Open AccessDiscrete-Time Integral Sliding Mode Control with Optimal Reaching Gain: Application to a Photovoltaic Battery Charging System
Discrete-time sliding mode controllers that utilize saturation-based reaching laws require a gain that ensures contraction within the boundary layer in the presence of multiplicative gain uncertainty. The conventional fixed-gain approach does not maintain this property at moderate uncertainty levels. This work introduces a family of admissible reaching gains and identifies a unique optimal gain that guarantees a specified worst-case contraction. The proposed method offers a closed-form solution to the worst-case contraction problem over the gain-uncertainty interval and determines the optimal contraction factor for the saturation-based reaching law for any finite uncertainty ratio. The optimal gain is integrated into a discrete-time integral sliding-mode framework, thereby eliminating the reaching phase. Furthermore, a past-step disturbance estimator with a confidence factor is introduced to prevent error amplification, which reduces the quasi-sliding band from first to second order in the sampling period when the realized gain approximates its nominal value. The effectiveness of the proposed approach is validated through its application to a photovoltaic battery-charging system with a DC–DC boost converter, achieving robust inductor-current regulation across three battery banks under varying irradiance conditions in a switching-level model with parasitic elements.
- Open Access
Integrated Sliding Mode Control and Adaptive-Step P&O MPPT Strategy for DC–DC Boost–Buck Converter in Photovoltaic Systems
The efficient utilization of solar energy largely depends on the capability of a photovoltaic system to operate at its maximum power point under variable irradiance and temperature conditions. In this context, a control strategy that combines a sliding mode control scheme with a Perturb-and-Observe-based maximum power point tracking (MPPT) algorithm with adaptive step size is proposed and applied to a DC–DC boost–buck converter. The proposed approach aims to improve the dynamic stability of the system, ensure robustness against model uncertainties, and enhance conversion efficiency. The MPPT algorithm employs an adaptive perturbation step that reduces steady-state oscillations and accelerates convergence toward the optimal operating point, while the sliding mode controller guarantees accurate tracking of the converter voltage reference under external disturbances. Simulation and experimental results validate the effectiveness of the proposed strategy, achieving an overall efficiency of 99.42% and a startup time of 180 ms in the implemented version. These results confirm improved transient response, reduced steady-state error, and high efficiency compared to competing control strategies reported in the literature.
Open AccessIntegrated Sliding Mode Control and Adaptive-Step P&O MPPT Strategy for DC–DC Boost–Buck Converter in Photovoltaic Systems
The efficient utilization of solar energy largely depends on the capability of a photovoltaic system to operate at its maximum power point under variable irradiance and temperature conditions. In this context, a control strategy that combines a sliding mode control scheme with a Perturb-and-Observe-based maximum power point tracking (MPPT) algorithm with adaptive step size is proposed and applied to a DC–DC boost–buck converter. The proposed approach aims to improve the dynamic stability of the system, ensure robustness against model uncertainties, and enhance conversion efficiency. The MPPT algorithm employs an adaptive perturbation step that reduces steady-state oscillations and accelerates convergence toward the optimal operating point, while the sliding mode controller guarantees accurate tracking of the converter voltage reference under external disturbances. Simulation and experimental results validate the effectiveness of the proposed strategy, achieving an overall efficiency of 99.42% and a startup time of 180 ms in the implemented version. These results confirm improved transient response, reduced steady-state error, and high efficiency compared to competing control strategies reported in the literature.
- Open Access
- 18 January 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (2) , 245
Development of a Neural Network-Based Controller for a Greenhouse Irrigation System at Laboratory Scale
Water scarcity and inefficient irrigation practices are major challenges for modern protected agriculture systems. This study designs, implements, and experimentally validates a neural network-based irrigation control strategy in an industrial programmable logic controller (PLC) for a drip irrigation system operating in a laboratory-scale micro-tunnel greenhouse. The objective is to evaluate the real-time performance of an intelligent controller under practical operating conditions and to quantify its impact on water use efficiency and crop growth compared to a conventional on–off strategy. The neural network is trained using 1039 data samples, divided into training (70%), validation (15%), and test (15%) datasets, and is implemented in the PLC to regulate soil moisture through a proportional valve. Experimental validation is carried out over 67 days using a serrano chili pepper (Capsicum annuum L.) crop. Both controllers operate simultaneously under identical environmental and operating conditions. Performance is evaluated using soil moisture stability metrics, including mean squared error (MSE), mean absolute error (MAE), and standard error (SE), water consumption, and crop growth indicators prior to harvest. Results show that the neural network controller achieves higher soil moisture regulation accuracy (MSE = 3.2159%, MAE = 0.7560%, SE = 0.00001687%) and reduces the average daily water consumption per plant by 50.18% compared with the on–off controller. In addition, the absolute growth rate increases by 26.42%, with statistically significant differences. These results demonstrate that neural network-based control can be effectively implemented on industrial hardware and provide tangible benefits for water-efficient and precision irrigation systems.
- 18 January 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (2) , 245
Open AccessDevelopment of a Neural Network-Based Controller for a Greenhouse Irrigation System at Laboratory Scale
Water scarcity and inefficient irrigation practices are major challenges for modern protected agriculture systems. This study designs, implements, and experimentally validates a neural network-based irrigation control strategy in an industrial programmable logic controller (PLC) for a drip irrigation system operating in a laboratory-scale micro-tunnel greenhouse. The objective is to evaluate the real-time performance of an intelligent controller under practical operating conditions and to quantify its impact on water use efficiency and crop growth compared to a conventional on–off strategy. The neural network is trained using 1039 data samples, divided into training (70%), validation (15%), and test (15%) datasets, and is implemented in the PLC to regulate soil moisture through a proportional valve. Experimental validation is carried out over 67 days using a serrano chili pepper (Capsicum annuum L.) crop. Both controllers operate simultaneously under identical environmental and operating conditions. Performance is evaluated using soil moisture stability metrics, including mean squared error (MSE), mean absolute error (MAE), and standard error (SE), water consumption, and crop growth indicators prior to harvest. Results show that the neural network controller achieves higher soil moisture regulation accuracy (MSE = 3.2159%, MAE = 0.7560%, SE = 0.00001687%) and reduces the average daily water consumption per plant by 50.18% compared with the on–off controller. In addition, the absolute growth rate increases by 26.42%, with statistically significant differences. These results demonstrate that neural network-based control can be effectively implemented on industrial hardware and provide tangible benefits for water-efficient and precision irrigation systems.
- Open Access
Low-Cost Platform Implementation of Discrete Controllers for DC-DC Boost Converter
In recent years, various solutions have been developed to control power electronic converters using devices available on the market that are powerful and easy to use. These solutions, in most cases, offer high performance. However, these have high implementation costs because the required devices are expensive. For this reason, this document presents the implementation of two discrete-time controllers widely used in the literature for a boost converter implemented on a low-cost platform. The objective is to obtain a constant voltage at the converter’s output for photovoltaic system applications. The proportional-integral control is implemented as the first case, and the second case is a sliding mode control. In addition, a prior analysis is presented through simulation. Both control algorithms are implemented on the TMS320F28379D microcontroller from Texas Instruments through the same manufacturer’s integrated development software based on an optimized C/C++ language compiler. The results of the non-linear algorithm reveal better performance in reducing the time response, the overshoot of the transient state, and the steady-state error. Finally, the significant economic savings associated with the implementation costs of the controllers tested on a low-cost platform differentiate this work from other similar ones.
Open AccessLow-Cost Platform Implementation of Discrete Controllers for DC-DC Boost Converter
In recent years, various solutions have been developed to control power electronic converters using devices available on the market that are powerful and easy to use. These solutions, in most cases, offer high performance. However, these have high implementation costs because the required devices are expensive. For this reason, this document presents the implementation of two discrete-time controllers widely used in the literature for a boost converter implemented on a low-cost platform. The objective is to obtain a constant voltage at the converter’s output for photovoltaic system applications. The proportional-integral control is implemented as the first case, and the second case is a sliding mode control. In addition, a prior analysis is presented through simulation. Both control algorithms are implemented on the TMS320F28379D microcontroller from Texas Instruments through the same manufacturer’s integrated development software based on an optimized C/C++ language compiler. The results of the non-linear algorithm reveal better performance in reducing the time response, the overshoot of the transient state, and the steady-state error. Finally, the significant economic savings associated with the implementation costs of the controllers tested on a low-cost platform differentiate this work from other similar ones.
- Open Access
Evaluation of Serrano Pepper Crops Growth under Controlled Conditions of Vapor Pressure Deficit in a Pilot-Scale Hydroponic Greenhouse
Controlled Environment Agriculture (CEA) has become an important field of study in recent years. The objective of this research is to evaluate the growth rate of the serrano pepper crop under controlled conditions of vapor pressure deficit in a pilot-scale hydroponic greenhouse. The controlled conditions were generated with the development of a control system composed of a non-mixed crossflow heat exchanger for internal temperature and a humidification system for internal humidity control. The comparison of variables and the growth rate of the crop was carried out in a controlled and a timed greenhouse. The best growth rate for serrano pepper cultivation was obtained under the following conditions: between 4.14 and 5.42 kPa with 0.251 and 0.225 cm/day in the controlled greenhouse. The results show that it is possible to obtain higher crop growth rates by controlling the vapor pressure deficit in a pilot-scale hydroponic greenhouse, using a heat exchanger for temperature control and a humidification control system. Controlling vapor pressure deficit can be a useful tool for agriculture in CEA.
Open AccessEvaluation of Serrano Pepper Crops Growth under Controlled Conditions of Vapor Pressure Deficit in a Pilot-Scale Hydroponic Greenhouse
Controlled Environment Agriculture (CEA) has become an important field of study in recent years. The objective of this research is to evaluate the growth rate of the serrano pepper crop under controlled conditions of vapor pressure deficit in a pilot-scale hydroponic greenhouse. The controlled conditions were generated with the development of a control system composed of a non-mixed crossflow heat exchanger for internal temperature and a humidification system for internal humidity control. The comparison of variables and the growth rate of the crop was carried out in a controlled and a timed greenhouse. The best growth rate for serrano pepper cultivation was obtained under the following conditions: between 4.14 and 5.42 kPa with 0.251 and 0.225 cm/day in the controlled greenhouse. The results show that it is possible to obtain higher crop growth rates by controlling the vapor pressure deficit in a pilot-scale hydroponic greenhouse, using a heat exchanger for temperature control and a humidification control system. Controlling vapor pressure deficit can be a useful tool for agriculture in CEA.
- 11 November 2022
- Published by Wiley in International Journal of Robust and Nonlinear Control
- Vol. 33 (15) , 9233-9250
Robust discrete‐time output feedback stabilization of integrator chains
This work proposes a discrete‐time output feedback controller to stabilize an integrator chain system in the presence of measurement noise and external disturbances. Besides, two structural systems are considered, the first one is a system with a saturation in the control input. The second one is a system with an unbounded input. Since the system output is supposed to be periodically sampled and noisy, a discrete‐time filtering observer is designed. Hence, using the output of the observer, a discrete‐time controller is derived. The closed‐loop system convergence and robustness analysis are also presented. Simulation results are performed, aiming to illustrate the main characteristics of the proposal, including comparisons between the closed‐loop system with an explicit and implicit discrete‐time observer. Finally, having proved the features of the implicit realization, the controller with an implicit differentiator is implemented to control a DC–DC buck converter.
- 11 November 2022
- Published by Wiley in International Journal of Robust and Nonlinear Control
- Vol. 33 (15) , 9233-9250
Robust discrete‐time output feedback stabilization of integrator chains
This work proposes a discrete‐time output feedback controller to stabilize an integrator chain system in the presence of measurement noise and external disturbances. Besides, two structural systems are considered, the first one is a system with a saturation in the control input. The second one is a system with an unbounded input. Since the system output is supposed to be periodically sampled and noisy, a discrete‐time filtering observer is designed. Hence, using the output of the observer, a discrete‐time controller is derived. The closed‐loop system convergence and robustness analysis are also presented. Simulation results are performed, aiming to illustrate the main characteristics of the proposal, including comparisons between the closed‐loop system with an explicit and implicit discrete‐time observer. Finally, having proved the features of the implicit realization, the controller with an implicit differentiator is implemented to control a DC–DC buck converter.
- Open Access
An Output Feedback Discrete-Time Controller for the DC-DC Buck Converter
This paper presents a discrete-time output feedback controller to regulate the output voltage of a DC-DC buck converter. The proposal’s main feature is the application of a discrete-time equivalent of the robust exact filtering differentiator. First, the document exposes a theoretical analysis of the closed-loop system, where it is considered the problem of implementing a real-time differentiator with a good relationship between exactness and noise filtration performance. Hence, secondly, the controller in a laboratory setup is presented. The first experimental results suggest that the proposed controller exhibits good robustness against noise and maintains the asymptotic accuracy, even with saturated control inputs, as in the case of the DC-DC buck converter. Consequently, aiming to verify the features of the proposed method, the controller is validated through multiple experiments, showing satisfactory voltage tracking accuracy, good suppression of instantaneous load and supply voltage disturbances, and robustness against bounded measurement noise.
Open AccessAn Output Feedback Discrete-Time Controller for the DC-DC Buck Converter
This paper presents a discrete-time output feedback controller to regulate the output voltage of a DC-DC buck converter. The proposal’s main feature is the application of a discrete-time equivalent of the robust exact filtering differentiator. First, the document exposes a theoretical analysis of the closed-loop system, where it is considered the problem of implementing a real-time differentiator with a good relationship between exactness and noise filtration performance. Hence, secondly, the controller in a laboratory setup is presented. The first experimental results suggest that the proposed controller exhibits good robustness against noise and maintains the asymptotic accuracy, even with saturated control inputs, as in the case of the DC-DC buck converter. Consequently, aiming to verify the features of the proposed method, the controller is validated through multiple experiments, showing satisfactory voltage tracking accuracy, good suppression of instantaneous load and supply voltage disturbances, and robustness against bounded measurement noise.
- 14 March 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (9) , 2165-2172
Self-adjustment of spectral components to object wave field extraction in off-axis digital holography
In this paper, we introduce a positioning system to self-adjust the spectral components of holograms recorded by an off-axis digital holography setup. The incidence angle of the reference arm is carried out by two motorized actuators controlled by an algorithm that automatically adjusts it to avoid the overlapping of the spectral components. The right positioning of the spectral components allows selection of a spectral region to extract only the virtual component so that, after an inverse Fourier transformation, the object wave field can be obtained, thus eliminating the undesired components and increasing the image quality of the reconstructed image.
- 14 March 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (9) , 2165-2172
Self-adjustment of spectral components to object wave field extraction in off-axis digital holography
In this paper, we introduce a positioning system to self-adjust the spectral components of holograms recorded by an off-axis digital holography setup. The incidence angle of the reference arm is carried out by two motorized actuators controlled by an algorithm that automatically adjusts it to avoid the overlapping of the spectral components. The right positioning of the spectral components allows selection of a spectral region to extract only the virtual component so that, after an inverse Fourier transformation, the object wave field can be obtained, thus eliminating the undesired components and increasing the image quality of the reconstructed image.
- Open Access
- 28 August 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (17) , 7957
Control of Vapor Pressure Deficit (VPD) on Black Sesame Seed (Sesamum indicum L.) Sprout Production in a Micro-Greenhouse Using Intelligent Control
The demand for fresh and healthy food has been increasing, and different options for growing sprouts have been presented to solve this, such as traditional techniques and cultivation under controlled conditions. However, sprout farming has not explored all the tools available to produce these foods under controlled conditions. This study presents an alternative to produce sesame seed sprouts in a micro-greenhouse applying intelligent control algorithms for vapor pressure deficit. There was an improvement of 56% in the germination percentage, 2.59 in the germination index, 9.7% in the production of proteins, 1.1% in ash and an increase of 77.03 mm in the sprouts’ length collected in the micro-greenhouse in comparison with the traditional technique. This was achieved by maintaining a mean error for soil moisture at 87% and 0.93 kPa for vapor pressure deficit by applying proportional–integral–derivative, fuzzy logic and neural network control algorithms in the micro-greenhouse. The study shows that the nutritional content, the measured germination parameters and the size are improved in sesame sprout production by applying intelligent control algorithms for vapor pressure deficit in a micro-greenhouse.
- 28 August 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (17) , 7957
Open AccessControl of Vapor Pressure Deficit (VPD) on Black Sesame Seed (Sesamum indicum L.) Sprout Production in a Micro-Greenhouse Using Intelligent Control
The demand for fresh and healthy food has been increasing, and different options for growing sprouts have been presented to solve this, such as traditional techniques and cultivation under controlled conditions. However, sprout farming has not explored all the tools available to produce these foods under controlled conditions. This study presents an alternative to produce sesame seed sprouts in a micro-greenhouse applying intelligent control algorithms for vapor pressure deficit. There was an improvement of 56% in the germination percentage, 2.59 in the germination index, 9.7% in the production of proteins, 1.1% in ash and an increase of 77.03 mm in the sprouts’ length collected in the micro-greenhouse in comparison with the traditional technique. This was achieved by maintaining a mean error for soil moisture at 87% and 0.93 kPa for vapor pressure deficit by applying proportional–integral–derivative, fuzzy logic and neural network control algorithms in the micro-greenhouse. The study shows that the nutritional content, the measured germination parameters and the size are improved in sesame sprout production by applying intelligent control algorithms for vapor pressure deficit in a micro-greenhouse.
- Open Access
- 17 July 2020
- Published by Wiley in International Journal of Photoenergy
- Vol. 2020, 1-13
Evaluation and Design of Power Controller of Two-Axis Solar Tracking by PID and FL for a Photovoltaic Module
Solar trackers represent an essential tool to increase the energy production of photovoltaic modules compared to fixed systems. Unlike previous technologies where the aim is to keep the solar rays perpendicular to the surface of the module and obtain a constant output power, this paper proposes the design and evaluation of two controllers for a two-axis solar tracker, which maintains the power that is produced by photovoltaic modules at their nominal value. To achieve this, mathematical models of the dynamics of the sun, the solar energy obtained on the Earth’s surface, the two-axis tracking system in its electrical and mechanical parts, and the solar cell are developed and simulated. Two controllers are designed to be evaluated in the solar tracking system, one Proportional-Integral-Derivative and the other by Fuzzy Logic. The evaluation of the simulations shows a better performance of the controller by Fuzzy Logic; this is because it presents a shorter stabilization time, a transient of smaller amplitude, and a lower percentage of error in steady-state. The principle of operation of the solar tracking system is to promote the orientation conditions of the photovoltaic module to generate the maximum available power until reaching the nominal one. This is possible because it has a gyroscope on the surface of the module that determines its position with respect to the hour angle and altitude of the sun; a data acquisition card is developed to implement voltage and current sensors, which measure the output power it produces from the photovoltaic module throughout the day and under any weather conditions. The results of the implementation demonstrate that a Fuzzy Logic control for a two-axis solar tracker maintains the output power of the photovoltaic module at its nominal parameters during peak sun hours.
- 17 July 2020
- Published by Wiley in International Journal of Photoenergy
- Vol. 2020, 1-13
Open AccessEvaluation and Design of Power Controller of Two-Axis Solar Tracking by PID and FL for a Photovoltaic Module
Solar trackers represent an essential tool to increase the energy production of photovoltaic modules compared to fixed systems. Unlike previous technologies where the aim is to keep the solar rays perpendicular to the surface of the module and obtain a constant output power, this paper proposes the design and evaluation of two controllers for a two-axis solar tracker, which maintains the power that is produced by photovoltaic modules at their nominal value. To achieve this, mathematical models of the dynamics of the sun, the solar energy obtained on the Earth’s surface, the two-axis tracking system in its electrical and mechanical parts, and the solar cell are developed and simulated. Two controllers are designed to be evaluated in the solar tracking system, one Proportional-Integral-Derivative and the other by Fuzzy Logic. The evaluation of the simulations shows a better performance of the controller by Fuzzy Logic; this is because it presents a shorter stabilization time, a transient of smaller amplitude, and a lower percentage of error in steady-state. The principle of operation of the solar tracking system is to promote the orientation conditions of the photovoltaic module to generate the maximum available power until reaching the nominal one. This is possible because it has a gyroscope on the surface of the module that determines its position with respect to the hour angle and altitude of the sun; a data acquisition card is developed to implement voltage and current sensors, which measure the output power it produces from the photovoltaic module throughout the day and under any weather conditions. The results of the implementation demonstrate that a Fuzzy Logic control for a two-axis solar tracker maintains the output power of the photovoltaic module at its nominal parameters during peak sun hours.