Mohd Fauzi Zanil
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mohd Fauzi Zanil has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Mohammed Azlan Hussain
Sustainable Process Engineering Centre (SPEC), Department of Chemical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia
4 shared publications - Kiat Moon Lee
UCSI University
3 shared publications A K Abdul-Wahab
Biomedical Engineering Department, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
1 shared publicationA.K. Abdul Wahab
1 shared publicationA.M. Norhuda
Department of Chemical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia
1 shared publicationAbdualati Ibrahim Al-Tabib
Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Malaysia
1 shared publication
Latest Publications
- Open Access
- 17 November 2025
- Published by Elsevier in Digital Chemical Engineering
- Vol. 18
Optimal rules base development in Type-2 fuzzy logic for stochastic chemical control system
- 17 November 2025
- Published by Elsevier in Digital Chemical Engineering
- Vol. 18
Open AccessOptimal rules base development in Type-2 fuzzy logic for stochastic chemical control system
- 23 May 2019
- Published by Galaxy Tech Solutions in Research Communication in Engineering Science & Technology
- Vol. 2, 6-16
Development of IoT based Heat Exchanger Control Trainer for Undergraduate Process Control Programme
Heat exchanger control trainer is a device that helps to demonstrate process control of process variables and simulates real world industrial plant system whereas the implementation of Internet of things (IoT) technology allows wireless communication. This paper describes a work to develop an IoT based heat exchanger control trainer for undergraduate process control programme with the implement Proportional-Integral-Derivative (PID) controller and fuzzy logic controller into the control trainer system together. The work started up with the development of graphical user interface (GUI) for the control trainer followed by the construction and coding of the control trainer prototype. The work has developed a heat exchanger control trainer GUI with PID and fuzzy logic controller. Information was able to be transmitted wirelessly between the GUI and control trainer prototype using Wi-Fi modules. The tested maximum signal strength was -90 dBm in 50 m when connected to indoor Wi-Fi router. The control trainer was able to achieve simple temperature feedback control of the cold side of the heat exchanger. The user manual included the basic user guide of the developed control trainer user interface. Kp, Ki, Kd of Ziegler-Nichols tuning method obtained in Offline case studies are 90,18, 112.5 whereas 7.2009, 1.1473, and 7.3163 for Cohen-Coon tuning method. The Offline test result shows a better accuracy of control using the fuzzy logic controller with -0.07% of steady-state error. Further improvement could be made to by adding cooling system into the control trainer prototype and apply modern techniques in the GUI control systems.
- 23 May 2019
- Published by Galaxy Tech Solutions in Research Communication in Engineering Science & Technology
- Vol. 2, 6-16
Development of IoT based Heat Exchanger Control Trainer for Undergraduate Process Control Programme
Heat exchanger control trainer is a device that helps to demonstrate process control of process variables and simulates real world industrial plant system whereas the implementation of Internet of things (IoT) technology allows wireless communication. This paper describes a work to develop an IoT based heat exchanger control trainer for undergraduate process control programme with the implement Proportional-Integral-Derivative (PID) controller and fuzzy logic controller into the control trainer system together. The work started up with the development of graphical user interface (GUI) for the control trainer followed by the construction and coding of the control trainer prototype. The work has developed a heat exchanger control trainer GUI with PID and fuzzy logic controller. Information was able to be transmitted wirelessly between the GUI and control trainer prototype using Wi-Fi modules. The tested maximum signal strength was -90 dBm in 50 m when connected to indoor Wi-Fi router. The control trainer was able to achieve simple temperature feedback control of the cold side of the heat exchanger. The user manual included the basic user guide of the developed control trainer user interface. Kp, Ki, Kd of Ziegler-Nichols tuning method obtained in Offline case studies are 90,18, 112.5 whereas 7.2009, 1.1473, and 7.3163 for Cohen-Coon tuning method. The Offline test result shows a better accuracy of control using the fuzzy logic controller with -0.07% of steady-state error. Further improvement could be made to by adding cooling system into the control trainer prototype and apply modern techniques in the GUI control systems.
- Open Access
- 15 March 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-13
Continuous Butanol Fermentation of Dilute Acid-Pretreated De-oiled Rice Bran by Clostridium acetobutylicum YM1
Continuous fermentation of dilute acid-pretreated de-oiled rice bran (DRB) to butanol by theClostridium acetobutylicumYM1 strain was investigated. Pretreatment of DRB with dilute sulfuric acid (1%) resulted in the production of 42.12 g/L total sugars, including 25.57 g/L glucose, 15.1 g/L xylose and 1.46 g/L cellobiose. Pretreated-DRB (SADRB) was used as a fermentation medium at various dilution rates, and a dilution rate of 0.02 h−1was optimal for solvent production, in which 11.18 g/L of total solvent was produced (acetone 4.37 g/L, butanol 5.89 g/L and ethanol 0.92 g/L). Detoxification of SADRB with activated charcoal resulted in the high removal of fermentation inhibitory compounds. Fermentation of detoxified-SADRB in continuous fermentation with a dilution rate of 0.02 h−1achieved higher concentrations of solvent (12.42 g/L) and butanol (6.87 g/L), respectively, with a solvent productivity of 0.248 g/L.h. This study showed that the solvent concentration and productivity in continuous fermentation from SADRB was higher than that obtained from batch culture fermentation. This study also provides an economic assessment for butanol production in continuous fermentation process from DRB to validate the commercial viability of this process.
- 15 March 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-13
Open AccessContinuous Butanol Fermentation of Dilute Acid-Pretreated De-oiled Rice Bran by Clostridium acetobutylicum YM1
Continuous fermentation of dilute acid-pretreated de-oiled rice bran (DRB) to butanol by theClostridium acetobutylicumYM1 strain was investigated. Pretreatment of DRB with dilute sulfuric acid (1%) resulted in the production of 42.12 g/L total sugars, including 25.57 g/L glucose, 15.1 g/L xylose and 1.46 g/L cellobiose. Pretreated-DRB (SADRB) was used as a fermentation medium at various dilution rates, and a dilution rate of 0.02 h−1was optimal for solvent production, in which 11.18 g/L of total solvent was produced (acetone 4.37 g/L, butanol 5.89 g/L and ethanol 0.92 g/L). Detoxification of SADRB with activated charcoal resulted in the high removal of fermentation inhibitory compounds. Fermentation of detoxified-SADRB in continuous fermentation with a dilution rate of 0.02 h−1achieved higher concentrations of solvent (12.42 g/L) and butanol (6.87 g/L), respectively, with a solvent productivity of 0.248 g/L.h. This study showed that the solvent concentration and productivity in continuous fermentation from SADRB was higher than that obtained from batch culture fermentation. This study also provides an economic assessment for butanol production in continuous fermentation process from DRB to validate the commercial viability of this process.
- 22 November 2018
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 94 (4) , 1073-1081
Interval type‐2 fuzzy logic with Karmen‐Mendel algorithm for sequential ionic liquid dissolution–solid acid saccharification
BACKGROUND Acquiring a good model is important in representing the real system especially in complex chemical processes. In this work, type‐2 fuzzy with Karmen‐Mendel algorithm is proposed to model the sequential ionic liquid dissolution‐solid acid saccharification. The fuzzy calculation framework was regressed using gradient descent technique in finding the best fit model for a given data set with the target to achieve minimum integral square error (ISE) between predicted and experiment data. RESULTS The regression results for both ionic liquid dissolution and solid acid saccharification where of ISE 107.62 at computational time of 907.35 s, and ISE of 69.65 at 672.90 s respectively. Along with the high R‐squared value of 0.98829 (ionic liquid dissolution) and 0.92585 (solid acid saccharification) suggesting the good fit of the models. An optimum reducing sugars yield of 99.0% at dissolution conditions: 1.5 h, 155oC and 1.5% substrate loading; and saccharification conditions: 1.5 h, 120oC and 6% catalyst loading, was achieved. CONCLUSION This study has demonstrated a good fit of model for the sequential ionic liquid dissolution‐solid acid saccharification process. The model developed has a potential to be used in predicting the sugars production in the sequential ionic liquid dissolution‐solid acid saccharification.
- 22 November 2018
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 94 (4) , 1073-1081
Interval type‐2 fuzzy logic with Karmen‐Mendel algorithm for sequential ionic liquid dissolution–solid acid saccharification
BACKGROUND Acquiring a good model is important in representing the real system especially in complex chemical processes. In this work, type‐2 fuzzy with Karmen‐Mendel algorithm is proposed to model the sequential ionic liquid dissolution‐solid acid saccharification. The fuzzy calculation framework was regressed using gradient descent technique in finding the best fit model for a given data set with the target to achieve minimum integral square error (ISE) between predicted and experiment data. RESULTS The regression results for both ionic liquid dissolution and solid acid saccharification where of ISE 107.62 at computational time of 907.35 s, and ISE of 69.65 at 672.90 s respectively. Along with the high R‐squared value of 0.98829 (ionic liquid dissolution) and 0.92585 (solid acid saccharification) suggesting the good fit of the models. An optimum reducing sugars yield of 99.0% at dissolution conditions: 1.5 h, 155oC and 1.5% substrate loading; and saccharification conditions: 1.5 h, 120oC and 6% catalyst loading, was achieved. CONCLUSION This study has demonstrated a good fit of model for the sequential ionic liquid dissolution‐solid acid saccharification process. The model developed has a potential to be used in predicting the sugars production in the sequential ionic liquid dissolution‐solid acid saccharification.
- Open Access
- 1 March 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 334 (1) , 012021
Design of neural network model-based controller in a fed-batch microbial electrolysis cell reactor for bio-hydrogen gas production
One of major challenge in bio-hydrogen production process by using MEC process is nonlinear and highly complex system. This is mainly due to the presence of microbial interactions and highly complex phenomena in the system. Its complexity makes MEC system difficult to operate and control under optimal conditions. Thus, precise control is required for the MEC reactor, so that the amount of current required to produce hydrogen gas can be controlled according to the composition of the substrate in the reactor. In this work, two schemes for controlling the current and voltage of MEC were evaluated. The controllers evaluated are PID and Inverse neural network (NN) controller. The comparative study has been carried out under optimal condition for the production of bio-hydrogen gas wherein the controller output is based on the correlation of optimal current and voltage to the MEC. Various simulation tests involving multiple set-point changes and disturbances rejection have been evaluated and the performances of both controllers are discussed. The neural network-based controller results in fast response time and less overshoots while the offset effects are minimal. In conclusion, the Inverse neural network (NN)-based controllers provide better control performance for the MEC system compared to the PID controller.
- 1 March 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 334 (1) , 012021
Open AccessDesign of neural network model-based controller in a fed-batch microbial electrolysis cell reactor for bio-hydrogen gas production
One of major challenge in bio-hydrogen production process by using MEC process is nonlinear and highly complex system. This is mainly due to the presence of microbial interactions and highly complex phenomena in the system. Its complexity makes MEC system difficult to operate and control under optimal conditions. Thus, precise control is required for the MEC reactor, so that the amount of current required to produce hydrogen gas can be controlled according to the composition of the substrate in the reactor. In this work, two schemes for controlling the current and voltage of MEC were evaluated. The controllers evaluated are PID and Inverse neural network (NN) controller. The comparative study has been carried out under optimal condition for the production of bio-hydrogen gas wherein the controller output is based on the correlation of optimal current and voltage to the MEC. Various simulation tests involving multiple set-point changes and disturbances rejection have been evaluated and the performances of both controllers are discussed. The neural network-based controller results in fast response time and less overshoots while the offset effects are minimal. In conclusion, the Inverse neural network (NN)-based controllers provide better control performance for the MEC system compared to the PID controller.
- Open Access
- 1 November 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 160 (1) , 012108
Performance Comparison of Cuckoo Search and Differential Evolution Algorithm for Constrained Optimization
Cuckoo Search (CS) and Differential Evolution (DE) algorithms are considerably robust meta-heuristic algorithms to solve constrained optimization problems. In this study, the performance of CS and DE are compared in solving the constrained optimization problem from selected benchmark functions. Selection of the benchmark functions are based on active or inactive constraints and dimensionality of variables (i.e. number of solution variable). In addition, a specific constraint handling and stopping criterion technique are adopted in the optimization algorithm. The results show, CS approach outperforms DE in term of repeatability and the quality of the optimum solutions.
- 1 November 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 160 (1) , 012108
Open AccessPerformance Comparison of Cuckoo Search and Differential Evolution Algorithm for Constrained Optimization
Cuckoo Search (CS) and Differential Evolution (DE) algorithms are considerably robust meta-heuristic algorithms to solve constrained optimization problems. In this study, the performance of CS and DE are compared in solving the constrained optimization problem from selected benchmark functions. Selection of the benchmark functions are based on active or inactive constraints and dimensionality of variables (i.e. number of solution variable). In addition, a specific constraint handling and stopping criterion technique are adopted in the optimization algorithm. The results show, CS approach outperforms DE in term of repeatability and the quality of the optimum solutions.
- 1 January 2016
- Published by Elsevier
- p. 907-912
Development of Hybrid Fuzzy-GMC Control System for MSF Desalination Process
- 1 January 2016
- Published by Elsevier
- p. 907-912
Development of Hybrid Fuzzy-GMC Control System for MSF Desalination Process
- 1 March 2015
- Published by Elsevier in Chemical Engineering Journal
- Vol. 264, 706-719
Modified two-phase model with hybrid control for gas phase propylene copolymerization in fluidized bed reactors
- 1 March 2015
- Published by Elsevier in Chemical Engineering Journal
- Vol. 264, 706-719
Modified two-phase model with hybrid control for gas phase propylene copolymerization in fluidized bed reactors