Igor Sokolov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Igor Sokolov has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Evgeniy Shvydkiy
Ural Federal University, Yekaterinburg, Russian Federation
4 shared publications Kirill E. Bolotin
Ural Power Engineering Institute, Ural Federal University, Yekaterinburg, Russia
3 shared publications- Vadim Kazakbaev
Department of Electrical Engineering, Ural Federal University, 620002 Yekaterinburg, Russia
3 shared publications - Vladimir Dmitrievskii
Department of Electrical Engineering, Ural Federal University, 620002 Yekaterinburg, Russia
3 shared publications - Vladimir Prakht
Department of Electrical Engineering, Ural Federal University, 620002 Yekaterinburg, Russia
3 shared publications G Losev
2 shared publications
Latest Publications
- 2 January 2020
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 39 (1) , 28-35
Shape optimization of soft magnetic composite inserts for electromagnetic stirrer with traveling magnetic field
Purpose: The purpose of this paper is to search optimal shape of soft magnetic composite-based inserts used to compensate the working gap between the liquid metal and the induction stirrer in metallurgical installations. Design/methodology/approach: The study was based on numerical simulation of electromagnetic processes in frequency domain. To optimize inserts shape, the Nelder–Mead method was used. The maximum of integral electrodynamic force along x-axis was chosen as the objective function. All simulations were performed in finite element software package Comsol Multiphysics. Findings: Optimal inserts shape was determined, at which the value of integral electrodynamic force along x-axis increased by 20% from 692 to 792 N. Originality/value: Magnetic concentrators based on soft magnetic composite materials have long been used in high-frequency systems; at the same time, their use in low-frequency systems has not been previously considered in detail. The study of the shape effect of concentrators on the effectiveness of electromagnetic field in a liquid metal in a three-dimensional formulation was carried out for the first time.
- 2 January 2020
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 39 (1) , 28-35
Shape optimization of soft magnetic composite inserts for electromagnetic stirrer with traveling magnetic field
Purpose: The purpose of this paper is to search optimal shape of soft magnetic composite-based inserts used to compensate the working gap between the liquid metal and the induction stirrer in metallurgical installations. Design/methodology/approach: The study was based on numerical simulation of electromagnetic processes in frequency domain. To optimize inserts shape, the Nelder–Mead method was used. The maximum of integral electrodynamic force along x-axis was chosen as the objective function. All simulations were performed in finite element software package Comsol Multiphysics. Findings: Optimal inserts shape was determined, at which the value of integral electrodynamic force along x-axis increased by 20% from 692 to 792 N. Originality/value: Magnetic concentrators based on soft magnetic composite materials have long been used in high-frequency systems; at the same time, their use in low-frequency systems has not been previously considered in detail. The study of the shape effect of concentrators on the effectiveness of electromagnetic field in a liquid metal in a three-dimensional formulation was carried out for the first time.
- 2 January 2020
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 39 (1) , 125-132
Influence of vessel dimensions on particles homogenization and heat removing in TMF stirrer
Purpose: The purpose of this paper is to determine how the shape of the container affects the efficiency of a traveling magnetic field (TMF) stirring. Design/methodology/approach: The modeling approach is based on finite element software Comsol which includes harmonic electromagnetic (EM), transient CFD and particle tracing modules. For evaluating efficiency of stirring the particle, homogenization parameter is used. Findings: It has been determined that the use of an elliptical cylinder-shaped vessel allows better heat removal from the side surface and, at the same time, the stirring efficiency does not drop significantly. Practical implications: The results of the work can be used in the design of EM stirring installations in which exothermic reactions occur. Originality/value: The transient simulation of particle transport in a TMF-driven melt flow gives the opportunity to estimate the efficiency of stirring process in different vessel shapes.
- 2 January 2020
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 39 (1) , 125-132
Influence of vessel dimensions on particles homogenization and heat removing in TMF stirrer
Purpose: The purpose of this paper is to determine how the shape of the container affects the efficiency of a traveling magnetic field (TMF) stirring. Design/methodology/approach: The modeling approach is based on finite element software Comsol which includes harmonic electromagnetic (EM), transient CFD and particle tracing modules. For evaluating efficiency of stirring the particle, homogenization parameter is used. Findings: It has been determined that the use of an elliptical cylinder-shaped vessel allows better heat removal from the side surface and, at the same time, the stirring efficiency does not drop significantly. Practical implications: The results of the work can be used in the design of EM stirring installations in which exothermic reactions occur. Originality/value: The transient simulation of particle transport in a TMF-driven melt flow gives the opportunity to estimate the efficiency of stirring process in different vessel shapes.
- Open Access
- 1 July 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 581 (1)
Stirring flow of liquid metal generating by low-frequency modulated traveling magnetic field in rectangular cell
- 1 July 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 581 (1)
Open AccessStirring flow of liquid metal generating by low-frequency modulated traveling magnetic field in rectangular cell
- Open Access
- 1 July 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 581 (1)
The influence of traveling magnetic field inductor asymmetric power supply on the liquid metal flow
In modern times, exposure to a liquid metal by a travelling magnetic field is widely applied. There are laboratory studies on the processes of stirring and crystallization under the action of a traveling magnetic field. However, in the majority of studies it is assumed that the inductor power supply of the linear induction machine is carried out by a symmetrical three-phase system of currents with an equal phase shift, which, in some cases, is not quite correct. To approximate the model to real operating conditions, a numerical simulation of the magnetic field and the flow of liquid metal was carried out when supplied from a power source of symmetric three-phase voltage. The distortion of magnetic field, which, in turn, causes an nonuniform distribution of forces and the flow of a liquid metal, is shown. Evaluation of asymmetrical effect on the liquid metal flow was carried out by means of finite element method. That effect is caused by different coefficients of mutual coils induction of the linear induction machine, which is confirmed by experimental data.
- 1 July 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 581 (1)
Open AccessThe influence of traveling magnetic field inductor asymmetric power supply on the liquid metal flow
In modern times, exposure to a liquid metal by a travelling magnetic field is widely applied. There are laboratory studies on the processes of stirring and crystallization under the action of a traveling magnetic field. However, in the majority of studies it is assumed that the inductor power supply of the linear induction machine is carried out by a symmetrical three-phase system of currents with an equal phase shift, which, in some cases, is not quite correct. To approximate the model to real operating conditions, a numerical simulation of the magnetic field and the flow of liquid metal was carried out when supplied from a power source of symmetric three-phase voltage. The distortion of magnetic field, which, in turn, causes an nonuniform distribution of forces and the flow of a liquid metal, is shown. Evaluation of asymmetrical effect on the liquid metal flow was carried out by means of finite element method. That effect is caused by different coefficients of mutual coils induction of the linear induction machine, which is confirmed by experimental data.
- 1 June 2019
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2019 (6) , 570-575
Impurity Distribution in a Two-Sided Electromagnetic Stirrer
- 1 June 2019
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2019 (6) , 570-575
Impurity Distribution in a Two-Sided Electromagnetic Stirrer
- 1 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Modeling Electromagnetic Stirring Processes during Continuous Casting of Large-format Slabs
The paper describes the method, mathematical model and results of electromagnetic stirring processes investigation. A complex mathematical model of an electromagnetic stirrer, considering electromagnetic and hydrodynamic processes, has been developed. Using the developed model, the problem of melt flow control in a finite element formulation was solved using the CAE software package, which provided a tool for studying electromagnetic mixing processes. The processes under the influence of an electromagnetic stirrer built into a continuous casting machine of large-format slabs using computer simulation were investigated, which allowed determining typical operating modes: the optimal frequency is 1 Hz, the current strength is at least 550 A, and the design parameters of inductors.
- 1 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Modeling Electromagnetic Stirring Processes during Continuous Casting of Large-format Slabs
The paper describes the method, mathematical model and results of electromagnetic stirring processes investigation. A complex mathematical model of an electromagnetic stirrer, considering electromagnetic and hydrodynamic processes, has been developed. Using the developed model, the problem of melt flow control in a finite element formulation was solved using the CAE software package, which provided a tool for studying electromagnetic mixing processes. The processes under the influence of an electromagnetic stirrer built into a continuous casting machine of large-format slabs using computer simulation were investigated, which allowed determining typical operating modes: the optimal frequency is 1 Hz, the current strength is at least 550 A, and the design parameters of inductors.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1095-1098
Shape Optimization of Magnetic Core of Electromagnetic Stirrer for Melted Silicon
Volume heating used during silicon purifying permit uniformly temperature distribution at all bowl. Forced stirring with quartz devices is associated with high process failure and low efficiency. To intensify the process, it is proposed to use electromagnetic stirring by a traveling magnetic field. Optimal shape design of stirrer can be obtained by a multiobjective optimization method based on gradient descent to reduce primary weight and stirring time, simultaneously. Objective function is defined from magnetohydrodynamic problem considered in this article. Also, different version of magnetic core is examined. This coupled-field problem is decoupled to separated magnetic, hydrodynamic and thermal problems and analyzed by means of finite element method, while the optimal design problem is solved by gradient-based algorithm and best solution is chosen.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1095-1098
Shape Optimization of Magnetic Core of Electromagnetic Stirrer for Melted Silicon
Volume heating used during silicon purifying permit uniformly temperature distribution at all bowl. Forced stirring with quartz devices is associated with high process failure and low efficiency. To intensify the process, it is proposed to use electromagnetic stirring by a traveling magnetic field. Optimal shape design of stirrer can be obtained by a multiobjective optimization method based on gradient descent to reduce primary weight and stirring time, simultaneously. Objective function is defined from magnetohydrodynamic problem considered in this article. Also, different version of magnetic core is examined. This coupled-field problem is decoupled to separated magnetic, hydrodynamic and thermal problems and analyzed by means of finite element method, while the optimal design problem is solved by gradient-based algorithm and best solution is chosen.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 939-941
Influence of Optimality Criterion Choice on the Electromagnetic Stirrer Optimization Results
Shape optimization occupies an important place in the development of MHD-stirrer for liquid metal, allowing to reduce economic and time costs. For all importance and relevance, there is still no unequivocal opinion as to which optimality criterion should be chosen: integral electromechanical force, integral melt velocity or time of technological process, for example, equalizing temperature in the melt volume. Present paper is devoted to comparing results of magnetic core optimization for MHD-stirrer with a traveling EM field for listed optimality criteria. As a parameter, by which efficiency of obtained result was evaluated, the time taken to equalize temperature in the melt volume was chosen.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 939-941
Influence of Optimality Criterion Choice on the Electromagnetic Stirrer Optimization Results
Shape optimization occupies an important place in the development of MHD-stirrer for liquid metal, allowing to reduce economic and time costs. For all importance and relevance, there is still no unequivocal opinion as to which optimality criterion should be chosen: integral electromechanical force, integral melt velocity or time of technological process, for example, equalizing temperature in the melt volume. Present paper is devoted to comparing results of magnetic core optimization for MHD-stirrer with a traveling EM field for listed optimality criteria. As a parameter, by which efficiency of obtained result was evaluated, the time taken to equalize temperature in the melt volume was chosen.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1092-1094
Dependence of Titanium Sample Position Inside Coil on Axial Levitation Force
Levitation melting is method for heating conducting materials suspended at alternating magnetic field, main advantage of this approach is absence of melt contact with the crucible material, which is necessary to obtain ultra-pure materials. One of the task arising during the design of installations is the creation of an optimal combination of the levitating inductor configuration and the power supply parameter, which ensures a levitation of the sample. A titanium cylinder of m = 4 g is used as the object under consideration; a multilayer cylindrical coil with a reverse turn was taken as the inductor design. Two cases were considered with the frequency of the supply current f = 6 kHz and f = 60 kHz. To calculate forces generated by the coil, the finite element method was applied, the electromagnetic problem was solved in for different currents, the pushing force and relative object position dependence was defined.
- 1 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1092-1094
Dependence of Titanium Sample Position Inside Coil on Axial Levitation Force
Levitation melting is method for heating conducting materials suspended at alternating magnetic field, main advantage of this approach is absence of melt contact with the crucible material, which is necessary to obtain ultra-pure materials. One of the task arising during the design of installations is the creation of an optimal combination of the levitating inductor configuration and the power supply parameter, which ensures a levitation of the sample. A titanium cylinder of m = 4 g is used as the object under consideration; a multilayer cylindrical coil with a reverse turn was taken as the inductor design. Two cases were considered with the frequency of the supply current f = 6 kHz and f = 60 kHz. To calculate forces generated by the coil, the finite element method was applied, the electromagnetic problem was solved in for different currents, the pushing force and relative object position dependence was defined.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 585-587
Numerical simulation of MHD stirrer for 12 ton metallurgical aggregate
Paper presents results of numerical simulation of the induction stirrer for 12-ton metallurgical aggregate for liquid aluminum. A comparison between several designs of stirrer was made. Influence of stirrer position relative to metal was considered. In addition, a study of the effect of adding special high temperature magnetodielectric inserts to the lining was made. Based on the results obtained, the most energy effective design of the induction stirrer.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 585-587
Numerical simulation of MHD stirrer for 12 ton metallurgical aggregate
Paper presents results of numerical simulation of the induction stirrer for 12-ton metallurgical aggregate for liquid aluminum. A comparison between several designs of stirrer was made. Influence of stirrer position relative to metal was considered. In addition, a study of the effect of adding special high temperature magnetodielectric inserts to the lining was made. Based on the results obtained, the most energy effective design of the induction stirrer.