Evrim Yavuz
Evrim Yavuz has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Fadime Sertçelik
Kocaeli University
3 shared publications - Tahir Serkan Irmak
Department of Geophysical Engineering, Kocaeli University , Izmit 41001, Kocaeli
3 shared publications Hamdullah Livaoğlu
Seismology Section, Department of Geophysics, Kocaeli University, Kocaeli, Turkey
2 shared publicationsAli Silahtar
1 shared publicationB. G. Lühr
GFZ, German Research Centre for Geoscience, Postsdam, Germany
1 shared publicationB. Tunç
Faculty of Engineering, Department of Geophysics, Kocaeli University, 41380, Kocaeli, Turkey
1 shared publication
Latest Publications
- Open Access
- 30 July 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (4) , 884-898
Characterization of Micro-seismic Activity in Northern Cyprus Using Complexity and Corner Frequency Methods
Cyprus is an island country located in the eastern Mediterranean, to the south of Türkiye and the western of Syria and Lebanon, and is a popular tourist destination. Due to being surrounded by seas on all four sides, meticulous planning of rescue, assistance, and evacuation plans is necessary in the face of disasters such as earthquakes and tsunamis. Tectonically, the southern part of the island is controlled by the Cyprus Arc, while the northern part is dominated by the Kyrenia Range. The demand for raw materials for construction and industry is met through controlled quarry blasting operations carried out by open-pit quarry companies in the districts of Kyrenia and Nicosia. As a result, both natural and artificial seismic events occur in the region, and these quakes are documented in seismic catalogs by seismology centers. However, due to the low energy content of micro-seismic events and the inadequacy of seismic stations on the island, the source types of these seismic events can be misidentified in the catalogs. In this context, the study focuses on 122 seismic events with magnitudes between 0.9≤Ml≤2.7 that occurred in Northern Cyprus during the January 2018 - December 2021 period (4 years). The seismic events recorded by the station LFK, operated by Boğaziçi University Kandilli Observatory and Earthquake Research Institute Regional Earthquake-Tsunami Monitoring Center (KOERI-RETMC), were classified using Linear and Quadratic Discriminant Functions based on complexity and corner frequency methods. According to the results obtained, 10 of the 122 seismic events were identified as natural, and 96 were determined to be artificial, resulting in a general success rate of 86.89%. However, classification results for 16 seismic events were inconclusive with the methods used. As a result, more detailed secondary analyses should be conducted to accurately determine the source types of micro-seismic events, and the seismic catalogs should be updated accordingly.
- 30 July 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (4) , 884-898
Open AccessCharacterization of Micro-seismic Activity in Northern Cyprus Using Complexity and Corner Frequency Methods
Cyprus is an island country located in the eastern Mediterranean, to the south of Türkiye and the western of Syria and Lebanon, and is a popular tourist destination. Due to being surrounded by seas on all four sides, meticulous planning of rescue, assistance, and evacuation plans is necessary in the face of disasters such as earthquakes and tsunamis. Tectonically, the southern part of the island is controlled by the Cyprus Arc, while the northern part is dominated by the Kyrenia Range. The demand for raw materials for construction and industry is met through controlled quarry blasting operations carried out by open-pit quarry companies in the districts of Kyrenia and Nicosia. As a result, both natural and artificial seismic events occur in the region, and these quakes are documented in seismic catalogs by seismology centers. However, due to the low energy content of micro-seismic events and the inadequacy of seismic stations on the island, the source types of these seismic events can be misidentified in the catalogs. In this context, the study focuses on 122 seismic events with magnitudes between 0.9≤Ml≤2.7 that occurred in Northern Cyprus during the January 2018 - December 2021 period (4 years). The seismic events recorded by the station LFK, operated by Boğaziçi University Kandilli Observatory and Earthquake Research Institute Regional Earthquake-Tsunami Monitoring Center (KOERI-RETMC), were classified using Linear and Quadratic Discriminant Functions based on complexity and corner frequency methods. According to the results obtained, 10 of the 122 seismic events were identified as natural, and 96 were determined to be artificial, resulting in a general success rate of 86.89%. However, classification results for 16 seismic events were inconclusive with the methods used. As a result, more detailed secondary analyses should be conducted to accurately determine the source types of micro-seismic events, and the seismic catalogs should be updated accordingly.
- 17 May 2023
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 82 (11) , 1-15
Identifying the source types of the seismic events using discriminant functions and tree-based machine learning algorithms at Soma Region, Turkey
- 17 May 2023
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 82 (11) , 1-15
Identifying the source types of the seismic events using discriminant functions and tree-based machine learning algorithms at Soma Region, Turkey
- Open Access
- 27 March 2023
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 11 (1) , 279-297
İSTANBUL AVRUPA YAKASINDA MEYDANA GELEN SİSMİK OLAYLARIN KAYNAK TÜRLERİNİN BELİRLENMESİ
Nüfus, sanayi, yapılaşma ve turizm açısından ülkemizin en yoğun kenti olan İstanbul, tektonik olarak, güneyinde uzanan Ana Marmara Fayı’nın kontrolü altındadır. Endüstriyel hammadde ihtiyacı ise Avrupa Yakasındaki taş ocağı işletmeleri tarafından sağlanmaktadır. Dolayısıyla, bölgede hem doğal hem de yapay kaynaklı mikro-sismik aktivite gözlenmektedir. Olayların enerji içeriği, sismik istasyon sayısının/dağılımının yeterli olmaması ve dalga fazlarının doğru seçilememesi vb. nedenlerden dolayı da kaynak türleri tanımlanmasında hatalar gözükebilmektedir. Daha güvenilir kaynak türü belirlenmesi ise ikincil analizler ile yapılmaktadır. Çalışmada, İstanbul Avrupa Yakası’nda 2007-2021 yılları arasında meydana gelen, büyüklüğü M≤2.8 olan 195 adet sismik olayın Boğaziçi Üniversitesi Kandilli Rasathanesi ve Deprem Araştırma Enstitüsü Bölgesel Deprem ve Tsunami İzleme Merkezi (KRDAE-BDTİM) tarafından işletilen altı adet deprem istasyonunda kayıt edilen 270 adet dalga formu için kaynak türü belirleme analizleri yapılmıştır. Olayların kaynak türleri katalog bilgilerinden bağımsız şekilde, görsel olarak belirlenerek yola çıkılmıştır. Düşey bileşen sismogramları kullanılarak, genlik oranı ve karmaşıklık yöntemleri uygulanmıştır. İstatistiksel sınıflandırma için Lineer ve Karesel Ayrımlaştırma Fonksiyonları kullanılarak, yöntem bazlı başarı oranları hesaplanmıştır. Sonuç olarak, 195 adet sismik olayın, 28 tanesinin deprem, 167 adetinin patlatma kaynaklı olduğu tespit edilmiştir. Daha güvenilir kaynak türü tanımlaması ile homojen kataloglar oluşturulmakta ve depremsellik, deprem tehlike analizleri gibi çalışmalarda araştırmacıların ikincil analizler ile zaman kaybı yaşamasının önüne geçilebilmektedir.
- 27 March 2023
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 11 (1) , 279-297
Open AccessİSTANBUL AVRUPA YAKASINDA MEYDANA GELEN SİSMİK OLAYLARIN KAYNAK TÜRLERİNİN BELİRLENMESİ
Nüfus, sanayi, yapılaşma ve turizm açısından ülkemizin en yoğun kenti olan İstanbul, tektonik olarak, güneyinde uzanan Ana Marmara Fayı’nın kontrolü altındadır. Endüstriyel hammadde ihtiyacı ise Avrupa Yakasındaki taş ocağı işletmeleri tarafından sağlanmaktadır. Dolayısıyla, bölgede hem doğal hem de yapay kaynaklı mikro-sismik aktivite gözlenmektedir. Olayların enerji içeriği, sismik istasyon sayısının/dağılımının yeterli olmaması ve dalga fazlarının doğru seçilememesi vb. nedenlerden dolayı da kaynak türleri tanımlanmasında hatalar gözükebilmektedir. Daha güvenilir kaynak türü belirlenmesi ise ikincil analizler ile yapılmaktadır. Çalışmada, İstanbul Avrupa Yakası’nda 2007-2021 yılları arasında meydana gelen, büyüklüğü M≤2.8 olan 195 adet sismik olayın Boğaziçi Üniversitesi Kandilli Rasathanesi ve Deprem Araştırma Enstitüsü Bölgesel Deprem ve Tsunami İzleme Merkezi (KRDAE-BDTİM) tarafından işletilen altı adet deprem istasyonunda kayıt edilen 270 adet dalga formu için kaynak türü belirleme analizleri yapılmıştır. Olayların kaynak türleri katalog bilgilerinden bağımsız şekilde, görsel olarak belirlenerek yola çıkılmıştır. Düşey bileşen sismogramları kullanılarak, genlik oranı ve karmaşıklık yöntemleri uygulanmıştır. İstatistiksel sınıflandırma için Lineer ve Karesel Ayrımlaştırma Fonksiyonları kullanılarak, yöntem bazlı başarı oranları hesaplanmıştır. Sonuç olarak, 195 adet sismik olayın, 28 tanesinin deprem, 167 adetinin patlatma kaynaklı olduğu tespit edilmiştir. Daha güvenilir kaynak türü tanımlaması ile homojen kataloglar oluşturulmakta ve depremsellik, deprem tehlike analizleri gibi çalışmalarda araştırmacıların ikincil analizler ile zaman kaybı yaşamasının önüne geçilebilmektedir.
- Open Access
- 3 October 2022
- Published by Instituto Nazionale di Geofisica e Vulcanologia, INGV in Annals of Geophysics
- Vol. 65 (Vol. 65 (2)
Refining micro-seismic catalogs around Seydişehir, Turkey
In Turkey, two official seismology centers, Bogazici University Kandilli Observatory and Earthquake Research Institute Regional Earthquake-Tsunami Monitoring Center (KOERI-RETMC) and Republic of Turkey Prime Ministry Disaster Emergency Management Authority (AFAD) announce and share seismic catalogs with the public and international services. According to their seismic network distribution, together with different crustal models and calculation algorithms, obtaining earthquake parameters (location, depth, etc.) could differ between these two centers, especially, affecting source types of the low-magnitude events. Both low-magnitude tectonic events and artificial quakes that originating from open-pit quarry are catalogued by the seismology centers. These two centers announce different source types for the seismic events; therefore, this study focuses on the reliable identification of the micro-seismic events. Magnitude Ml<2.4 177 seismic events commonly identified in KOERI-RETMC and AFAD catalogs are used. Due to the differences between KOERI-RETMC and AFAD seismic catalogs, the “first determination” (FD) was needed to start the discrimination analyses. Then, waveforms of the station SEYD and SEDI are operated by KOERI-RETMC and AFAD were analyzed with four methods (Amplitude Ratio, Complexity, Short Time Fourier Transform and Corner Frequency-Power Spectrum) and two statistical approaches (linear and quadratic discriminant functions) with the use and comparison with FD. Finally, station-based weightings are obtained with all techniques, and the source types of all events are calculated in percent. Generally, the success rates of the methods are calculated over 90%. The reliability increases with the co-usage of many analyses and the application of method-based weighting. Hence, many methods should be used to reliably determine the source types of micro-seismic events. Both centers should make more detailed analyses to identify micro-seismic events and share their reliable and revised catalogs.
- 3 October 2022
- Published by Instituto Nazionale di Geofisica e Vulcanologia, INGV in Annals of Geophysics
- Vol. 65 (Vol. 65 (2)
Open AccessRefining micro-seismic catalogs around Seydişehir, Turkey
In Turkey, two official seismology centers, Bogazici University Kandilli Observatory and Earthquake Research Institute Regional Earthquake-Tsunami Monitoring Center (KOERI-RETMC) and Republic of Turkey Prime Ministry Disaster Emergency Management Authority (AFAD) announce and share seismic catalogs with the public and international services. According to their seismic network distribution, together with different crustal models and calculation algorithms, obtaining earthquake parameters (location, depth, etc.) could differ between these two centers, especially, affecting source types of the low-magnitude events. Both low-magnitude tectonic events and artificial quakes that originating from open-pit quarry are catalogued by the seismology centers. These two centers announce different source types for the seismic events; therefore, this study focuses on the reliable identification of the micro-seismic events. Magnitude Ml<2.4 177 seismic events commonly identified in KOERI-RETMC and AFAD catalogs are used. Due to the differences between KOERI-RETMC and AFAD seismic catalogs, the “first determination” (FD) was needed to start the discrimination analyses. Then, waveforms of the station SEYD and SEDI are operated by KOERI-RETMC and AFAD were analyzed with four methods (Amplitude Ratio, Complexity, Short Time Fourier Transform and Corner Frequency-Power Spectrum) and two statistical approaches (linear and quadratic discriminant functions) with the use and comparison with FD. Finally, station-based weightings are obtained with all techniques, and the source types of all events are calculated in percent. Generally, the success rates of the methods are calculated over 90%. The reliability increases with the co-usage of many analyses and the application of method-based weighting. Hence, many methods should be used to reliably determine the source types of micro-seismic events. Both centers should make more detailed analyses to identify micro-seismic events and share their reliable and revised catalogs.
- 31 August 2020
- Published by Springer Nature in Acta Geodaetica et Geophysica
- Vol. 55 (4) , 645-665
Discrimination of the natural and artificial quakes in the Eastern Marmara Region, Turkey
- 31 August 2020
- Published by Springer Nature in Acta Geodaetica et Geophysica
- Vol. 55 (4) , 645-665
Discrimination of the natural and artificial quakes in the Eastern Marmara Region, Turkey
- 29 June 2020
- Published by Turkish Journal of Earthquake Research, Disaster and Emergency Management Authority in Türk Deprem Araştırma Dergisi
- Vol. 2 (1) , 27-46
22.01.2020 Akhisar-Manisa Depremi (Mw 5.5) ve Artçılarının Sismotektonik Analizi
Bu çalışmada, 22 Ocak 2020 Akhisar-Manisa (Mw 5.5) depremi ve artçılarının odak mekanizması çözümleri dalga şekli ters çözümü ile elde edilmiş ve buna göre sismotektonik yorum yapılmıştır. Bu amaçla, ana şok ve 35 artçı depremin odak mekanizması çözümleri ISOLA algoritması ile elde edilmiştir. Depremlerin odak mekanizması çözümlerinin çoğunluğu, bölgenin genişleme tektoniği ile uyumlu olup, normal faylanma ve az miktarda doğrultu atım bileşeni olan normal faylanma veya normal faylanma bileşeni olan doğrultu atımlı faylanma özelliğine sahiptir. Analizi yapılan depremlerin odak derinlikleri 4-15 km arasında değişmektedir. Gerilme tensörü ters çözümüne göre; bölge açılma rejiminin (R’=0.75) etkisi altındadır ve KD-BG yönünde açılmaktadır. Açılma hızı 1.3 mm/yıl olarak hesaplanmıştır. Bölgede minimum basınç ekseni (σ3), K21oD olarak yönlenmiştir. Asal gerilme eksenlerinin bölgedeki konumları sırasıyla σ_1, σ_2, ve σ_3 olmak üzere 74o /111o, 16o/291o ve 0o/201o (eğim/azimut) olarak hesaplanmıştır. Bu stres dağılımlarına göre depremlerin üzerlerinde meydana geldiği fay düzlemleri, gerilmeli tektonik kabuk deformasyonunu işaret etmektedir.
- 29 June 2020
- Published by Turkish Journal of Earthquake Research, Disaster and Emergency Management Authority in Türk Deprem Araştırma Dergisi
- Vol. 2 (1) , 27-46
22.01.2020 Akhisar-Manisa Depremi (Mw 5.5) ve Artçılarının Sismotektonik Analizi
Bu çalışmada, 22 Ocak 2020 Akhisar-Manisa (Mw 5.5) depremi ve artçılarının odak mekanizması çözümleri dalga şekli ters çözümü ile elde edilmiş ve buna göre sismotektonik yorum yapılmıştır. Bu amaçla, ana şok ve 35 artçı depremin odak mekanizması çözümleri ISOLA algoritması ile elde edilmiştir. Depremlerin odak mekanizması çözümlerinin çoğunluğu, bölgenin genişleme tektoniği ile uyumlu olup, normal faylanma ve az miktarda doğrultu atım bileşeni olan normal faylanma veya normal faylanma bileşeni olan doğrultu atımlı faylanma özelliğine sahiptir. Analizi yapılan depremlerin odak derinlikleri 4-15 km arasında değişmektedir. Gerilme tensörü ters çözümüne göre; bölge açılma rejiminin (R’=0.75) etkisi altındadır ve KD-BG yönünde açılmaktadır. Açılma hızı 1.3 mm/yıl olarak hesaplanmıştır. Bölgede minimum basınç ekseni (σ3), K21oD olarak yönlenmiştir. Asal gerilme eksenlerinin bölgedeki konumları sırasıyla σ_1, σ_2, ve σ_3 olmak üzere 74o /111o, 16o/291o ve 0o/201o (eğim/azimut) olarak hesaplanmıştır. Bu stres dağılımlarına göre depremlerin üzerlerinde meydana geldiği fay düzlemleri, gerilmeli tektonik kabuk deformasyonunu işaret etmektedir.
- Open Access
- 27 March 2020
- Published by Instituto Nazionale di Geofisica e Vulcanologia, INGV in Annals of Geophysics
- Vol. 62 (6) , DM673
Determination of Coda Wave attenuation characteristic of the Armutlu Peninsula and its surroundings (Middle Marmara Region, Turkey).
The Armutlu Peninsula, is located in a geologically complex system on the North Anatolian Fault Zone and inside the high populated Mar- mara Region. Due to its location and importance, the Marmara Region has been subject to various studies in the past; now, this study is aimed to determine the local attenuation characteristic of the Armutlu Peninsula. In this study, 75 earthquake data that were recorded between 2013- 2014, were analyzed by 9 seismic stations. The magnitudes (Ml) and the focal depths of the earthquakes vary from 1.5 to 3.3 and 0.9 to 16.9 km, respectively. A single back-scattering model was used for calculation of the coda wave quality factor. The lapse times were determined between 20 and 40 s at intervals of 5 s and they were filtered at central frequencies of 1.5, 3, 6, 9 and 12 Hz band-pass designed filter. Min- imum 5 signal/noise ratio and 0.7 correlation coefficient data used to obtain reliable results. The CODAQ subroutine integrated in the SEISAN software was used for data processing. For each station, low values of the quality factor at 1 Hz (Qo) and high values of the frequency de- pendent parameter (n) were determined. In the Armutlu Peninsula and its surroundings, Qc=51f0.91 for 20 s and Qc=112f0.72 for 40 s window lengths were calculated by using 9 stations. There is a tendency between increasing Qo and decreasing n parameters. Otherwise, for station TRML, located near the geothermal hotspot, these parameters are in direct proportion with each other, as Qc=46f0.97 for 20 s and Qc=74f1.06 for 40 s window lengths. These parameter changes are directly connected with the geothermal activity.
- 27 March 2020
- Published by Instituto Nazionale di Geofisica e Vulcanologia, INGV in Annals of Geophysics
- Vol. 62 (6) , DM673
Open AccessDetermination of Coda Wave attenuation characteristic of the Armutlu Peninsula and its surroundings (Middle Marmara Region, Turkey).
The Armutlu Peninsula, is located in a geologically complex system on the North Anatolian Fault Zone and inside the high populated Mar- mara Region. Due to its location and importance, the Marmara Region has been subject to various studies in the past; now, this study is aimed to determine the local attenuation characteristic of the Armutlu Peninsula. In this study, 75 earthquake data that were recorded between 2013- 2014, were analyzed by 9 seismic stations. The magnitudes (Ml) and the focal depths of the earthquakes vary from 1.5 to 3.3 and 0.9 to 16.9 km, respectively. A single back-scattering model was used for calculation of the coda wave quality factor. The lapse times were determined between 20 and 40 s at intervals of 5 s and they were filtered at central frequencies of 1.5, 3, 6, 9 and 12 Hz band-pass designed filter. Min- imum 5 signal/noise ratio and 0.7 correlation coefficient data used to obtain reliable results. The CODAQ subroutine integrated in the SEISAN software was used for data processing. For each station, low values of the quality factor at 1 Hz (Qo) and high values of the frequency de- pendent parameter (n) were determined. In the Armutlu Peninsula and its surroundings, Qc=51f0.91 for 20 s and Qc=112f0.72 for 40 s window lengths were calculated by using 9 stations. There is a tendency between increasing Qo and decreasing n parameters. Otherwise, for station TRML, located near the geothermal hotspot, these parameters are in direct proportion with each other, as Qc=46f0.97 for 20 s and Qc=74f1.06 for 40 s window lengths. These parameter changes are directly connected with the geothermal activity.
- 26 February 2020
- Published by Springer Nature in Geosciences Journal
- Vol. 24 (5) , 541-555
Source parameters for small-moderate earthquakes in Marmara Region (Turkey)
- 26 February 2020
- Published by Springer Nature in Geosciences Journal
- Vol. 24 (5) , 541-555
Source parameters for small-moderate earthquakes in Marmara Region (Turkey)
- Open Access
- 28 June 2019
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 8 (2) , 642-651
Gaziantep-Kahramanmaraş Bölgesinde Meydana Gelen Deprem ve Taş Ocağı Patlatmalarının Zaman ve Frekans Ortamı Yöntemleri ile Sınıflandırılması
Gaziantep-Kahramanmaraş bölgesi, Türkiye'nin güneydoğusunda tektonik yönden aktif bir alanda yer almaktadır. Bölgede, maden ve taş ocakları yaygın bir şekilde bulunmaktadır. Bunlara ait işletmelerde malzeme temini için patlayıcılar kullanılmaktadır. Dolayısıyla bölgede sadece tektonik olaylar değil yapay kaynaklı patlatmalar da sismik istasyonlar tarafından kayıt edilmektedir. Yapay ve doğal kaynaklı sarsıntı kayıtlarının sismik kataloglarda meydana getirdiği karmaşıklık, sismoloji çalışmaları için büyük sorun teşkil etmektedir. Bu çalışmanın amacı, çalışma alanında doğal ve yapay kaynaklı olayların ayırt edilerek kataloglardaki tanımlamanın net olarak ortaya konulmasıdır. Bu çalışmada, Boğaziçi Üniversitesi Kandilli Rasathanesi Deprem Araştırma Enstitüsü Bölgesel Deprem-Tsunami İzleme Merkezi (KRDAE-BDTİM) tarafından işletilen GAZ sismik istasyonunun kayıtları kullanılmıştır. Büyüklüğü en fazla 3.0 olan ve 2013-2016 yılları arasında meydana gelen 95 adet sismik olay kayıtlarının sadece yatay bileşenleri kullanılmıştır. Genlik oranı, karmaşıklık ve Sürekli Dalgacık Dönüşümü yöntemleri ile analizler yapılmıştır. Sınıflandırmada istatistiksel yaklaşım olarak lineer ve karesel ayrımlaştırma fonksiyonları (LAF-KAF) kullanılmıştır. Genlik oranı yöntemine göre, LAF sonucunda 69 adet ve KAF sonucunda 70 adet deprem ayrımlaştırılmıştır. Karmaşıklık yöntemine göre ise tüm olaylar arasında 24 patlatma kaydı yine aynı fonksiyonlar ile kategorize edilmiştir. Sürekli Dalgacık Dönüşümü analizine göre ise tüm olaylar kategorize edilmiştir. Sonuçlar, ilk gözlem ile kıyaslandığında KAF'ın LAF'a ve genlik oranı yönteminin karmaşıklık yöntemine göre daha iyi bir sınıflandırma sunduğu şeklinde yorumlanmıştır. Ayrıca, Sürekli Dalgacık Dönüşümü analizi ile de olaylar %100 başarı ile sınıflandırılmıştır.
- 28 June 2019
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 8 (2) , 642-651
Open AccessGaziantep-Kahramanmaraş Bölgesinde Meydana Gelen Deprem ve Taş Ocağı Patlatmalarının Zaman ve Frekans Ortamı Yöntemleri ile Sınıflandırılması
Gaziantep-Kahramanmaraş bölgesi, Türkiye'nin güneydoğusunda tektonik yönden aktif bir alanda yer almaktadır. Bölgede, maden ve taş ocakları yaygın bir şekilde bulunmaktadır. Bunlara ait işletmelerde malzeme temini için patlayıcılar kullanılmaktadır. Dolayısıyla bölgede sadece tektonik olaylar değil yapay kaynaklı patlatmalar da sismik istasyonlar tarafından kayıt edilmektedir. Yapay ve doğal kaynaklı sarsıntı kayıtlarının sismik kataloglarda meydana getirdiği karmaşıklık, sismoloji çalışmaları için büyük sorun teşkil etmektedir. Bu çalışmanın amacı, çalışma alanında doğal ve yapay kaynaklı olayların ayırt edilerek kataloglardaki tanımlamanın net olarak ortaya konulmasıdır. Bu çalışmada, Boğaziçi Üniversitesi Kandilli Rasathanesi Deprem Araştırma Enstitüsü Bölgesel Deprem-Tsunami İzleme Merkezi (KRDAE-BDTİM) tarafından işletilen GAZ sismik istasyonunun kayıtları kullanılmıştır. Büyüklüğü en fazla 3.0 olan ve 2013-2016 yılları arasında meydana gelen 95 adet sismik olay kayıtlarının sadece yatay bileşenleri kullanılmıştır. Genlik oranı, karmaşıklık ve Sürekli Dalgacık Dönüşümü yöntemleri ile analizler yapılmıştır. Sınıflandırmada istatistiksel yaklaşım olarak lineer ve karesel ayrımlaştırma fonksiyonları (LAF-KAF) kullanılmıştır. Genlik oranı yöntemine göre, LAF sonucunda 69 adet ve KAF sonucunda 70 adet deprem ayrımlaştırılmıştır. Karmaşıklık yöntemine göre ise tüm olaylar arasında 24 patlatma kaydı yine aynı fonksiyonlar ile kategorize edilmiştir. Sürekli Dalgacık Dönüşümü analizine göre ise tüm olaylar kategorize edilmiştir. Sonuçlar, ilk gözlem ile kıyaslandığında KAF'ın LAF'a ve genlik oranı yönteminin karmaşıklık yöntemine göre daha iyi bir sınıflandırma sunduğu şeklinde yorumlanmıştır. Ayrıca, Sürekli Dalgacık Dönüşümü analizi ile de olaylar %100 başarı ile sınıflandırılmıştır.
- 21 September 2018
- Published by Springer Nature in Journal of Seismology
- Vol. 23 (1) , 59-76
Discrimination of quarry blasts from tectonic events in the Armutlu Peninsula, Turkey
- 21 September 2018
- Published by Springer Nature in Journal of Seismology
- Vol. 23 (1) , 59-76
Discrimination of quarry blasts from tectonic events in the Armutlu Peninsula, Turkey