Volf Yakovlevich Borovoy
Research Subjects
Volf Yakovlevich Borovoy has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
I. V. Struminskaya
Central Aerohydrodynamic Institute (TsAGI)
7 shared publicationsA. S. Skuratov
Central Aerohydrodynamic Institute (TsAGI)
6 shared publications- Vladimir Mosharov
TsAGI
5 shared publications V. N. Radchenko
Central Aerohydrodynamic Institute
4 shared publications- Vladimir Pavlovich Radchenko
Samara State Technical University, Samara, 443100, Russian Federation
4 shared publications B. Chanetz
ONERA, Châtillon, France
3 shared publications
Latest Publications
- 23 September 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 60 (1) , 1-11
Laminar–Turbulent Transition Reversal on a Blunted Plate with Various Leading-Edge Shapes
The influence of the flat-plate leading-edge shape on laminar–turbulent transition is investigated. Experiments were carried out at a Mach number of M∞=5; a unit Reynolds number Re1∞ from 1.5×107 t...
- 23 September 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 60 (1) , 1-11
Laminar–Turbulent Transition Reversal on a Blunted Plate with Various Leading-Edge Shapes
The influence of the flat-plate leading-edge shape on laminar–turbulent transition is investigated. Experiments were carried out at a Mach number of M∞=5; a unit Reynolds number Re1∞ from 1.5×107 t...
- 1 November 2017
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 58 (6) , 975-989
Effect of Small Bluntness on Formation of Görtler Vortices in a Supersonic Compression Corner Flow
The influence of small cylindrical bluntness of the leading edge of a flat plate on formation of spatial structures in a nominally two-dimensional supersonic compression corner flow at the Mach...
- 1 November 2017
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 58 (6) , 975-989
Effect of Small Bluntness on Formation of Görtler Vortices in a Supersonic Compression Corner Flow
The influence of small cylindrical bluntness of the leading edge of a flat plate on formation of spatial structures in a nominally two-dimensional supersonic compression corner flow at the Mach...
- 1 February 2016
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 54 (2) , 443-457
Entropy-Layer Influence on Single-Fin and Double-Fin/Boundary-Layer Interactions
The influence of the entropy layer generated by the blunted-plate leading edge on the flow over a single fin or pair of fins installed on the plate is studied experimentally and numerically. Experiments are carried out in a Ludwieg-type wind tunnel at Mach numbers of , 6, and 8 and Reynolds numbers from to at turbulent, transitional, and laminar boundary layers on the plate in front of the fins. Panoramic optical methods are used for measurements of heat flux and pressure. Flow visualization is done as well. It is shown that even a small blunting of the plate leading edge considerably changes the heat transfer, pressure, and shear-stress distributions at the shock wave/boundary-layer interactions; and, under certain conditions, it causes changes of the flow structure.- 1 February 2016
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 54 (2) , 443-457
Entropy-Layer Influence on Single-Fin and Double-Fin/Boundary-Layer Interactions
The influence of the entropy layer generated by the blunted-plate leading edge on the flow over a single fin or pair of fins installed on the plate is studied experimentally and numerically. Experiments are carried out in a Ludwieg-type wind tunnel at Mach numbers of , 6, and 8 and Reynolds numbers from to at turbulent, transitional, and laminar boundary layers on the plate in front of the fins. Panoramic optical methods are used for measurements of heat flux and pressure. Flow visualization is done as well. It is shown that even a small blunting of the plate leading edge considerably changes the heat transfer, pressure, and shear-stress distributions at the shock wave/boundary-layer interactions; and, under certain conditions, it causes changes of the flow structure.- 1 January 2016
- Published by Begell House Inc. Publishers in TsAGI Science Journal
- Vol. 47 (3) , 309-327
BLUNTNESS EFFECT OF GAS-CONTRACTING WEDGES ON THE STARTING OF A GENERIC INLET
Bluntness effect of gas-compressing wedges on the flow in an air inlet is investigated. The inlet is of internal compression type with flat walls and a rectangular cross-section. The exper-iments were carried out in the UT-1M shock wind tunnel at Mach numbers M=5 and 8 and at the Reynolds numbers from ReL = 2.8 106 to 22 106. The flow characteristics are measured by panoramic optical methods. The data about influence of the bluntness radius of the leading edges of the wedges on the flow structure and on the inlet starting are obtained at different Mach and Reynolds numbers as well as at different inlet-channel convergence ratios. Ambiguity of the flow regime in the air in-take under certain conditions is found.
- 1 January 2016
- Published by Begell House Inc. Publishers in TsAGI Science Journal
- Vol. 47 (3) , 309-327
BLUNTNESS EFFECT OF GAS-CONTRACTING WEDGES ON THE STARTING OF A GENERIC INLET
Bluntness effect of gas-compressing wedges on the flow in an air inlet is investigated. The inlet is of internal compression type with flat walls and a rectangular cross-section. The exper-iments were carried out in the UT-1M shock wind tunnel at Mach numbers M=5 and 8 and at the Reynolds numbers from ReL = 2.8 106 to 22 106. The flow characteristics are measured by panoramic optical methods. The data about influence of the bluntness radius of the leading edges of the wedges on the flow structure and on the inlet starting are obtained at different Mach and Reynolds numbers as well as at different inlet-channel convergence ratios. Ambiguity of the flow regime in the air in-take under certain conditions is found.
- Open Access
- 8 June 2015
- Published by EDP Sciences
- Vol. 7, 419-436
Influence of leading edge bluntness on hypersonic flow in a generic internal-compression inlet
EUCASS proceedings series - Advances in AeroSpace Sciences, EUCASS
- 8 June 2015
- Published by EDP Sciences
- Vol. 7, 419-436
Open AccessInfluence of leading edge bluntness on hypersonic flow in a generic internal-compression inlet
EUCASS proceedings series - Advances in AeroSpace Sciences, EUCASS
- 1 July 2014
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 49 (4) , 454-467
Leading edge bluntness effect on the flow in a model air-inlet
Flow in an idealized air-inlet with plane walls and a rectangular cross-section is experimentally investigated. The air-inlet is mounted on a plate, at a distance well removed from its leading edge. T
- 1 July 2014
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 49 (4) , 454-467
Leading edge bluntness effect on the flow in a model air-inlet
Flow in an idealized air-inlet with plane walls and a rectangular cross-section is experimentally investigated. The air-inlet is mounted on a plate, at a distance well removed from its leading edge. T
- 1 January 2014
- Published by Begell House Inc. Publishers
Heat Transfer on Sharp and Blunted Flat Plate at Three-Dimensional Shock-Wave/Boundary-Layer Interaction
In the present paper, interaction of shock waves with turbulent boundary layer is investigated. Numerical and experimental investigation of flow on a flat plate near a single fin and a fin pair, generating crossings shocks, is performed. The study is focused upon the plate bluntness influence on the flow field and heat transfer in the interaction region. The numerical calculations and experiments were carried out at Mach number ?=5 and Reynolds number Re?L=27×10 6, as well as M=6 and Re?L=19×10 6.
- 1 January 2014
- Published by Begell House Inc. Publishers
Heat Transfer on Sharp and Blunted Flat Plate at Three-Dimensional Shock-Wave/Boundary-Layer Interaction
In the present paper, interaction of shock waves with turbulent boundary layer is investigated. Numerical and experimental investigation of flow on a flat plate near a single fin and a fin pair, generating crossings shocks, is performed. The study is focused upon the plate bluntness influence on the flow field and heat transfer in the interaction region. The numerical calculations and experiments were carried out at Mach number ?=5 and Reynolds number Re?L=27×10 6, as well as M=6 and Re?L=19×10 6.
- 1 September 2013
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 48 (5) , 636-647
Interaction of intersecting shocks with a flat-plate boundary layer in the presence of an entropy layer
Gas flow and heat transfer on the surfaces of sharp and blunt plates is experimentally investigated in the presence of two forward-looking wedges at the Mach numbers M = 5, 6, and 8 and the Reynolds numbers up to Re∞L = 27×106. It is shown that the entropy layer generated by a small bluntness of the leading edge of the plate can considerably change the heat transfer, the gas pressure, and the friction in the zone of interference of the shock with the plate boundary layer. Under certain conditions a small plate bluntness can also lead to a qualitative change in the flow structure. The effect of constriction of the channel between the wedges on the interference flow is studied.
- 1 September 2013
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 48 (5) , 636-647
Interaction of intersecting shocks with a flat-plate boundary layer in the presence of an entropy layer
Gas flow and heat transfer on the surfaces of sharp and blunt plates is experimentally investigated in the presence of two forward-looking wedges at the Mach numbers M = 5, 6, and 8 and the Reynolds numbers up to Re∞L = 27×106. It is shown that the entropy layer generated by a small bluntness of the leading edge of the plate can considerably change the heat transfer, the gas pressure, and the friction in the zone of interference of the shock with the plate boundary layer. Under certain conditions a small plate bluntness can also lead to a qualitative change in the flow structure. The effect of constriction of the channel between the wedges on the interference flow is studied.
- 1 January 2013
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 51 (1) , 80-93
Two-Dimensional Shock-Wave/Boundary-Layer Interaction in the Presence of Entropy Layer
Results of experimental and numerical study of gas flow and heat transfer in the region of interference of the impinging oblique shock wave with the near-wall flow on sharp and blunt plates are presented. The study is performed for the freestream Mach numbers from 5 to 10 and Reynolds numbers from 0.3×106 to 27×106 corresponding to the laminar and turbulent undisturbed boundary layers. The plate bluntness, location of the impinging shock, and the shock strength are varied. It is shown that the plate bluntness significantly reduces the heat transfer in the interference region due to the increase of separation-zone size and the reduction of gas density in the high-entropy layer. As the plate bluntness increases the heat transfer decays to a certain threshold value of the bluntness radius. The bluntness effect on the heat transfer increases and the bluntness threshold value decreases with the freestream Mach number.
- 1 January 2013
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 51 (1) , 80-93
Two-Dimensional Shock-Wave/Boundary-Layer Interaction in the Presence of Entropy Layer
Results of experimental and numerical study of gas flow and heat transfer in the region of interference of the impinging oblique shock wave with the near-wall flow on sharp and blunt plates are presented. The study is performed for the freestream Mach numbers from 5 to 10 and Reynolds numbers from 0.3×106 to 27×106 corresponding to the laminar and turbulent undisturbed boundary layers. The plate bluntness, location of the impinging shock, and the shock strength are varied. It is shown that the plate bluntness significantly reduces the heat transfer in the interference region due to the increase of separation-zone size and the reduction of gas density in the high-entropy layer. As the plate bluntness increases the heat transfer decays to a certain threshold value of the bluntness radius. The bluntness effect on the heat transfer increases and the bluntness threshold value decreases with the freestream Mach number.