Angelico Loreto Teixeira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Angelico Loreto Teixeira has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Giovani Leone Zabot
Laboratory of Agroindustrial Processes Engineering (LAPE), Federal University of Santa Maria (UFSM), Cachoeira do Sul, Brazil
2 shared publications - Lanes Beatriz Acosta Jaques
Department of Agricultural Engineering, Rural Sciences Center, Federal University of Santa Maria, Santa Maria, Rio Grande do Sul, Brazil
2 shared publications - Marcus Vinicius Tres
Laboratory of Agroindustrial Processes Engineering (LAPE), Federal University of Santa Maria (UFSM), Taufik Germano Rd., 3013, Cachoeira do Sul 96503-205, RS, Brazil
2 shared publications - Paulo Carteri Coradi
Laboratory of Postharvest (LAPOS), Campus Cachoeira Do Sul, Federal University of Santa Maria, Cachoeira Do Sul, Brazil
2 shared publications - Paulo Eduardo Teodoro
Agronomy Department, Federal University of Mato Grosso do Sul (UFMS), Chapadão do Sul 79560-000, MS, Brazil
2 shared publications - Amanda C. Muller
Northrop Grumman
1 shared publication
Latest Publications
- 16 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (3) , 3028-3040
Nondestructive Technology for Real-Time Monitoring and Prediction of Soybean Quality Using Machine Learning for a Bulk Transport Simulation
Grain moisture content and shipping time can interfere in post-harvest logistics on soybean quality. Thus, the study aimed to evaluate the use of a nondestructive technology, equipment including a mechanical-portable sampler with a hardware device and sensors for real-time monitoring of temperature, relative humidity, and intergranular carbon dioxide to predict the quality of soybean in function of different moisture contents (11, 14, and 18% w.b.), sampling positions in the grain mass profile and shipping time (0, 60, 480, and 1440 min). The monitoring of indirect quality measurement variables associated with the application of Machine Learning models satisfactorily predicted the physical quality of the grain mass, over the shipping time, for the different conditions tested. The moisture content associated with time was the factor with the greatest influence on the quality of transported grains. The shipping time is the determining factor for controlling the quality of grains. Lots of soybeans harvested from crops with moisture content between 14 and 18% must not exceed 120 min of shipping time to maintain quality. It is recommended that the shipping time of grains shipped from storage units to processing industries, with moisture contents between 11 and 14%, should not exceed 840 min. The M5P and REPtree algorithms were the ones that best performed the prediction of grain quality. The monitoring system and grain quality prediction has application in grain producing farms, grain storage, grain processing industry, and companies providing services in grain transport. The technology contributes to the grain loss reduction and conservation in the context of logistics, sustainability and food security.
- 16 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (3) , 3028-3040
Nondestructive Technology for Real-Time Monitoring and Prediction of Soybean Quality Using Machine Learning for a Bulk Transport Simulation
Grain moisture content and shipping time can interfere in post-harvest logistics on soybean quality. Thus, the study aimed to evaluate the use of a nondestructive technology, equipment including a mechanical-portable sampler with a hardware device and sensors for real-time monitoring of temperature, relative humidity, and intergranular carbon dioxide to predict the quality of soybean in function of different moisture contents (11, 14, and 18% w.b.), sampling positions in the grain mass profile and shipping time (0, 60, 480, and 1440 min). The monitoring of indirect quality measurement variables associated with the application of Machine Learning models satisfactorily predicted the physical quality of the grain mass, over the shipping time, for the different conditions tested. The moisture content associated with time was the factor with the greatest influence on the quality of transported grains. The shipping time is the determining factor for controlling the quality of grains. Lots of soybeans harvested from crops with moisture content between 14 and 18% must not exceed 120 min of shipping time to maintain quality. It is recommended that the shipping time of grains shipped from storage units to processing industries, with moisture contents between 11 and 14%, should not exceed 840 min. The M5P and REPtree algorithms were the ones that best performed the prediction of grain quality. The monitoring system and grain quality prediction has application in grain producing farms, grain storage, grain processing industry, and companies providing services in grain transport. The technology contributes to the grain loss reduction and conservation in the context of logistics, sustainability and food security.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-12
Portable-Mechanical-Sampler System for Real-Time Monitoring and Predicting Soybean Quality in the Bulk Transport
During transport, the grains can deteriorate and lose quality due to the increase in their metabolic activity. Thus, it is suggested that the monitoring of the intergranular variables and the prediction of the grain mass quality can collaborate in the decision-making about the time of transport and unloading. Therefore, equipment comprising a mechanical-portable sampler with a hardware device and DHT22 and MHZ-14 sensors was proposed in this study for the real-time monitoring of the temperature, relative humidity (RH), and carbon dioxide (CO2) of the intergranular air, with advantages about others technologies, since it is possible to predict the physical quality of soybean mass during bulk transport. In addition, the equipment allows sampling of the grain mass in the profile to analyze its quality on the laboratory to prove the results obtained in the monitoring and prediction. The equipment was developed using low-cost materials, sensors, and components and tested in the laboratory and at a full scale. The system was validated by comparing the results of the indirect measurement with those of the grain quality analyses. Thus, the equipment can be applied for the monitoring of bulk grain transport to avoid quantitative and qualitative losses and to collaborate in the field of food safety and post-harvest logistics.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-12
Portable-Mechanical-Sampler System for Real-Time Monitoring and Predicting Soybean Quality in the Bulk Transport
During transport, the grains can deteriorate and lose quality due to the increase in their metabolic activity. Thus, it is suggested that the monitoring of the intergranular variables and the prediction of the grain mass quality can collaborate in the decision-making about the time of transport and unloading. Therefore, equipment comprising a mechanical-portable sampler with a hardware device and DHT22 and MHZ-14 sensors was proposed in this study for the real-time monitoring of the temperature, relative humidity (RH), and carbon dioxide (CO2) of the intergranular air, with advantages about others technologies, since it is possible to predict the physical quality of soybean mass during bulk transport. In addition, the equipment allows sampling of the grain mass in the profile to analyze its quality on the laboratory to prove the results obtained in the monitoring and prediction. The equipment was developed using low-cost materials, sensors, and components and tested in the laboratory and at a full scale. The system was validated by comparing the results of the indirect measurement with those of the grain quality analyses. Thus, the equipment can be applied for the monitoring of bulk grain transport to avoid quantitative and qualitative losses and to collaborate in the field of food safety and post-harvest logistics.
- Open Access
- 7 February 2020
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 42, e22
Montagem, testes operacionais e validação de uma unidade laboratorial para extração de compostos de matrizes vegetais utilizando fluidos pressurizados ou supercríticos como solventes
Extractions of compounds still use traditional methods, leaving solvent residues in the extracts. An alternative is the use of high-pressure solvents such as supercritical CO2 and pressurized liquefied petroleum gas (LPG). Based on this context, the objective of this work was to assemble an equipment for high-pressure extractions using CO2 or pressurized LPG as solvent. The project and assembling were divided into 3 steps. In the first step, the equipment was designed. Also, aluminum bars, pipes, valves, pressure gauges, thermostatic baths, a pump for solvent pressurization, a digital temperature controller, a band heater and a reactor with filters were purchased. In the second step, some adaptations were done in the structure and its components for improving the operation. In the third step, the equipment was effectively assembled. Thereafter, operational validation tests were performed in order to verify the operation and the necessity of adjustments. In addition, a Standard Operating Procedure was created in order to standardize the next operations. The equipment is suitable for the extraction of bioactive compounds from different plant matrices, providing satisfactory extraction yields.
- 7 February 2020
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 42, e22
Open AccessMontagem, testes operacionais e validação de uma unidade laboratorial para extração de compostos de matrizes vegetais utilizando fluidos pressurizados ou supercríticos como solventes
Extractions of compounds still use traditional methods, leaving solvent residues in the extracts. An alternative is the use of high-pressure solvents such as supercritical CO2 and pressurized liquefied petroleum gas (LPG). Based on this context, the objective of this work was to assemble an equipment for high-pressure extractions using CO2 or pressurized LPG as solvent. The project and assembling were divided into 3 steps. In the first step, the equipment was designed. Also, aluminum bars, pipes, valves, pressure gauges, thermostatic baths, a pump for solvent pressurization, a digital temperature controller, a band heater and a reactor with filters were purchased. In the second step, some adaptations were done in the structure and its components for improving the operation. In the third step, the equipment was effectively assembled. Thereafter, operational validation tests were performed in order to verify the operation and the necessity of adjustments. In addition, a Standard Operating Procedure was created in order to standardize the next operations. The equipment is suitable for the extraction of bioactive compounds from different plant matrices, providing satisfactory extraction yields.
- Open Access
- 7 February 2020
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 42, e39
ResEnControl: um sistema de monitoramento de consumo de energia elétrica residencial em tempo real
The worldwide concern about the energy sector has been growing gradually. Several systems that seek to combine control and energy efficiency have been developed over the years. Given this problem, this work proposes a system of control of residential electricity consumption, which aims to give the user flexibility and real-time monitoring of the electrical energy expenditure by home appliances. The proposed system has a server developed in Python programming language that offers a web user interface and uses micro controllers to perform the energy measurement and data transmission to the control server. By applying the developed prototypes in a use scenario, it was observed that the prototypes met the requirements defined at the beginning of development.
- 7 February 2020
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 42, e39
Open AccessResEnControl: um sistema de monitoramento de consumo de energia elétrica residencial em tempo real
The worldwide concern about the energy sector has been growing gradually. Several systems that seek to combine control and energy efficiency have been developed over the years. Given this problem, this work proposes a system of control of residential electricity consumption, which aims to give the user flexibility and real-time monitoring of the electrical energy expenditure by home appliances. The proposed system has a server developed in Python programming language that offers a web user interface and uses micro controllers to perform the energy measurement and data transmission to the control server. By applying the developed prototypes in a use scenario, it was observed that the prototypes met the requirements defined at the beginning of development.
- Open Access
- 1 December 2019
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 36 (4) , 1689-1702
VALORIZATION OF Solanum viarum DUNAL BY EXTRACTING BIOACTIVE COMPOUNDS FROM ROOTS AND FRUITS USING ULTRASOUND AND SUPERCRITICAL CO2
Solanum viarum Dunal belongs to the Solanaceae family and it is considered to be a grazing weed toxic to cattle. In this study, ultrasound-assisted extraction (UAE) and supercritical CO2 extraction (SFE-CO2) were applied to evaluate the extraction yield and chemical composition of fruits and roots matrices of Solanum viarum Dunal. A hydroalcoholic solution (60% ethanol/40% water, v/v) was the solvent used for UAE. For comparisons, extractions with Soxhlet and maceration were carried out. For SFE-CO2, the highest yield was obtained at 60°C and 250 bar. For UAE, the highest yield was obtained at an ultrasound intensity of 75.11 W/cm2 and pulse cycle of 0.93. The techniques seem to be efficient for the extraction of chemical compounds, indicating a large number of bioactive compounds. The major compounds are 1,2-benzenedicarboxylic acid, quinic acid, octadecenoic acid, and solasodine. The results highlight the application of UAE to recover compounds from vegetal matrices, since it presented higher yields and more chemical constituents when compared with other techniques.
- 1 December 2019
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 36 (4) , 1689-1702
Open AccessVALORIZATION OF Solanum viarum DUNAL BY EXTRACTING BIOACTIVE COMPOUNDS FROM ROOTS AND FRUITS USING ULTRASOUND AND SUPERCRITICAL CO2
Solanum viarum Dunal belongs to the Solanaceae family and it is considered to be a grazing weed toxic to cattle. In this study, ultrasound-assisted extraction (UAE) and supercritical CO2 extraction (SFE-CO2) were applied to evaluate the extraction yield and chemical composition of fruits and roots matrices of Solanum viarum Dunal. A hydroalcoholic solution (60% ethanol/40% water, v/v) was the solvent used for UAE. For comparisons, extractions with Soxhlet and maceration were carried out. For SFE-CO2, the highest yield was obtained at 60°C and 250 bar. For UAE, the highest yield was obtained at an ultrasound intensity of 75.11 W/cm2 and pulse cycle of 0.93. The techniques seem to be efficient for the extraction of chemical compounds, indicating a large number of bioactive compounds. The major compounds are 1,2-benzenedicarboxylic acid, quinic acid, octadecenoic acid, and solasodine. The results highlight the application of UAE to recover compounds from vegetal matrices, since it presented higher yields and more chemical constituents when compared with other techniques.